Turning Archive 2005

Subject:
PM 3520 Vibration Problem Solved

George Van in WI
>Thanks to all that helped me with the vibration problem.

The problem was solved by replacing the bearings and removing the 3/8” bolts and leveling pads, letting the cast iron legs rest directly on the 4x4 trestle riser. I could not believe the difference when the pads were removed, 90% improvement.

Turning smoothly in Wisconsin!

George

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081