Turning Archive 2005

Subject:
Nova DVR head locking problem.

Colin Spencer
>I have my DVR set up but have a problem. The headstock won't lock. It rocks backwards and forwards about 2mm (I can pick the head up about 2mm from the bed), the rotation locks fine and is perfectly aligned with the tailsock. Is there some sort of adjustment to the large cone bolt that is supposed to lock it? I have tightened it up as far as I dare and it has bottomed out in the hole but the machined line is still about 1mm from the bed casting.

I have emailed Teknatool but of course due to the time difference I won't get a reply until after the weekend and I would like to use it this weekend.

TIA

Colin

Messages In This Thread

Nova DVR head locking problem.
Re: Nova DVR head locking problem.
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081