Turning Archive 2005

Subject:
3 Wheel Buff For Less *PIC*

Stuart Johnson
>There was another topic regarding which buffing wheels to purchase, Beall or other brand. This is a shot of a 3 wheel buff I made for a total cost of $41.59. The commercial ones cost around $90.00. I'm sure the hardware can be purchased for less than what I paid at my local ACE hardware store. The buffing wheel are from http://www.caswellplating.com . I don't want to get into a which is a better price Beall or these but these work fine and did not need the hole enlarged to accept the 3/4" all thread rod.

I also have the regular Beall set-up and if you were going to just use one at a time recommend it.

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081