Turning Archive 2005

Subject:
Smooth bottoms?

Robert Tutsky
>Hi all,
I have been turning end grain boxes for a while and am having some difficulty getting the inside bottoms of the boxes smooth without a lot of tedious sanding. I am wondering what tools you are using for smooth cuts. Presently I use a flat scraper and the surface I get is really rough. Thanks for your help.

Rob

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081