Turning Archive 2005

Subject:
electrical problem

john Lucas
>Well I was down to adding some more circiuts and a 220 line for the lathe and my shop would be ready to go. I turnied off the main circuit breaker and hooked everything up to the new circuit breakers I installed. Turned on the main breaker and none of my circuits work. It turns out that every other circuit breaker reads 0 when measured from the neutral side. Am I measuring wrong. I've never had this problem before.

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081