Turning Archive 2004

Pecan bowls. PICS

Dave Smith
>I turned these two bowls from some pecan I got from Sean Troy last February when I paid him a visit in Arizona. The pecan behaved nicely contrary to what I had heard. No cracks and very little movement. I guess I held my tongue right while they dried. Sanded to 600 then finished off the lathe. Finished with two coats of Rocklerís Polyurethane gel. Sanded with 600 between coats.

Small bowl, cored from the larger one, is 2 1/8" high, 5 7/8" wide and a wall thickness of 5/16". Finished dimensions of the large bowl are 3 3/8" high, 7 7/8" wide with a wall thickness of 7/16".

I took the pictures outside which made it easier to find somewhere to set the bowls. Now I need to get a better setting.

Thanks for looking

Dave Smith

Too much wood, not enough time in Longview, WA.

Messages In This Thread

Pecan bowls. PICS
Looking good!
Re: Pecan bowls. PICS
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.