Turning Archive 2004

Subject:
Floor strength concern

Phil Murray
>While I'm daydreaming about my PM3520A finally arriving, my mind keeps wandering back to a concern I have about all that (700#+) weight on my shop floor. It's two layers of 3/4"OSB over 2x10s, 16" O.C. Should I add more on top (and risk raising the spindle too high)?

Phil

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081