Turning Archive 2008

Subject:
Corugatta burl bowl *PIC*

stacey s
>This is a bowl made from corugatta burl. It is 100% natural on the bottom, ie. no chucking location. To do this I used a piece of 3/4" plywood and temporarly glued the burl to the plywood using wedges and hot melt glue. I was really suprised at how well the hot melt glue held. This burl is 13" x 11" x 4" thick. The finish is danish oil. I will buff it after the oil dries. Comments critques welcomed.
Stacey

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081