Turning Archive 2008

Subject:
Square Ash Platter *PIC*

Bruce Forrest
>Been wanting to do some square turning for a while now. This is an ash platter which is about 12 inches square. It sits on an inverse tapered (narrower at top end) foot about one inch high by about 3 inches in diameter (not visible in this view).
All comments welcome.

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081