Turning Archive 2007

Subject:
Turnings for a cradle? *PIC*

JL
>I'm making a cradle for some friends who are expecting their first.
I've started on these turnings (see pic below). The upper rail and lower "rails" will be about 3" x 36" x 7/8" thick. The approximate spacing of the spindles is about 3".

Are these spindles too "fat"? The overall size of the cradle portion is going to be 38" long by about 22" high by about 18" at the bottom. The stand for the cradle is going to be about 39" high.

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081