Turning Archive 2007

Subject:
Ebonizing Brew

Paul Zerjay
>I made a mixture of DNA and trans tint dye to make my own ebonizing stain. Thinking the alcohol would flash off quickly, I tried putting a clear coat of deft spray on 1/2 hr after the ebonizing mixture. The results were less than impressive, with the deft sitting on the surface in some spots, and soaking in to the point it would dissappear in other spots. The wood is hard maple. Can anyone give me a tip for a clear coat over my mixture? TIA

Messages In This Thread

Ebonizing Brew
Seal with shellac?
Re: Ebonizing Brew
Re: Ebonizing Brew
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081