Turning Archive 2007

Subject:
Follow up on silver soldering post

Don henthorn
>Tried all the suggestions from a couple of days ago and even ground the two surfaces to make sure they were clean. No luck. This is crazy; I used to do this with no problem. Any way I used Mark M's suggestion and got the hole drilled in the end of the 3/8" rod and used the CA glue and it worked. One tool down and the hook tool to go. The next one is 5/16" drill rod which is going to be more of a challenge to drill. I got to keep on trucking.(G)

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081