Turning Archive 2007

Subject:
Learn to use the Skew!!

Russ Fairfield
>There are always those who say it is not necessary to learn how to use the skew chisel. The current thread on buying tools is typical. I disagree.

Every woodturner should learn to use the skew because it is the best tool for learning how wood is cut. It is also the best tool for learning tool control and using the bevel. After that, everything else is easier.

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081