Turning Archive 2007

Subject:
Lathe Update... *PIC*

dwr
>... The lathe has a new home if and when it arrives. Two days of cutting welding and painting (bad photograph... need to read John's lighting article...;) Gloss black SHOULD go with the powder coating...

Called Derek.

Powder not there.

Derek was to call supplier and call me right back.

Three hours later, called back and said it would be there Friday A.M.

Asked how they were going to re-finish.

Derek said Sand and re-powder base coat and top coat.

Now I don't feel bad passing on the urethane primer for another $100... four coats of powder should work.... yeah, he says...

Asked when lathe would be ready for pick-up.

Friday at 2:00... you betcha...

Told Derek I was going to be there at 10:00 with camera in hand...

Stay tuned to the Bat Channel...

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081