Turning Archive 2007

Subject:
Walnut HF w/ filled Crack *PIC*

Andy DiPietro
>I posted the second photo back on March 15th asking for crack filling suggestions. I experimented with several of the good suggestions. I ended up filling the crack with 5 minute epoxy and fine coffee grounds. The epoxy held together better then CA glue and it did not shrink or chip. Comments are welcome. The HF is 6.5" dia x 8" high, 1/8" wall with a 1.5" opening and a 2" base. It was finished with Waterlox and buffed.

Thanks
Andy DiPietro

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081