Turning Archive 2007

Subject:
Mahogany Bowl *PIC*

Bill Blasic
>Mahogany with a maple addition on the bottom as I got really thin. 5 1/2" X 1". This was a scrap that I was going to throw away but noticed the figure so I put it on the lathe and it turned out real nice except for getting too thin on the bottom. I had chucked it by expansion so I put the maple plug in it to thicken the bottom and fill in the expansion hole. Comments and critique welcome.

Messages In This Thread

Mahogany Bowl *PIC*
Re: Mahogany Bowl
Re: Mahogany Bowl
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081