Turning Archive 2007

Subject:
another option on dremel carrage *PIC*

Norm Smith in Nova Scotia
>This is a cheap drenel type tool ($10.00) epoxied to wood cradle and screwed to plastic sled. The table is adjustable up and down and is level. The dremel tool can be centered by adjusting the elevation of the table using the bur in the tool and the drive center. The table can also be adjusted up or down by holding a square to the live center. For larger V groves I use a laminent trimmer. It has a block epoxied to it and than is screwed to a plastic sled. I have been using this system for a few years and have found it to work very well. The Ttable is a piece of counter top attached to a 6" face plate with a 1" bolt (head cut off) screwed in , that fits my banjo.
See other pictures

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081