Turning Archive 2006

Subject:
Champagne bucket in process *PIC*

Jim King
>A first attempt using small pieces glued up for turning . Maybe it qualifies as a segmented piece. It is the ice container for a table side champagne ice bucket. The size is about 11 tall by 11 in dia.. It was roughed out with 12 sections for each ring and glued up and hand sanded and then glued ring on top of ring all with white carpenters glue. The stand will be a large inside out turning as well as an inside out handle on top of the cover. It should be about 54 tall when done in a few days. The bucket has 192 pieces and all is made of pink flame wood kiln dried inch boards. Kind of thrilling turning the inside and hoping it stayed glued to that little peice of bloodwood. (For pink champagne)

Messages In This Thread

Champagne bucket in process *PIC*
Re: Champagne bucket in process
Re: Champagne bucket in process
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081