Turning Archive 2006

Subject:
Lathes

john vitosky
>I am just curious as to what lathes everyone has? I have a craftsman that I have been pleased with. Bought it for $125. Will upgrade someday but having fun on this one. So what have you got?

Messages In This Thread

Lathes
GI 25-650 and CTC 1234
Re: Lathes *LINK*
Re: Lathes
Re: Lathes
Re: Lathes
Re: Lathes
Jet 1642 and Delta Midi *NM*
Poolewood Euro 2000
Jet1642, 6 ft. W&H Beheomuth, delta midi NM *NM*
2 x Silverdrive Stateman, PM3520, 2 x Hegner *NM*
ShopSmith, Nova Mercury, and Jet Mini (non-vs) *NM*
Re: D.I.D. Pro 4 *NM*
Re: D.I.D. Pro 4
Interesting how many Jet Minis...
Chalk up another one here.
Re: Chalk up another one here. And another here! *NM*
No One Else Will But I Will Admit To A HF34706
I'll admit it...
Jet 1236 *NM*
Re: Lathes
PM3520B, Oneway 12-24 and JET Mini VS...NM
Stubby S750 and Vicmarc VL100 *NM*
Re: Grizz 1067Z. NM *NM*
Re: Lathes
Older Rockwell and Jet mini *NM*
Poolewood Euro 2000 & Mercury Mini *NM*
How about giving pros and cons
Brian, I can comment on one that you listed
Re: How about giving pros and cons
!946 vintage Delta & Nova 3K *NM*
Grizzly G0462 *NM*
Re: Lathes
My lathes
Nichols Custom Built....
PM3520a, DeltaMidi, Homemade oak(first one) *NM*
Re: JET 1642EVS and JET MINI
General 260-20 *NM*
VL300 shorty bed NM *NM*
Stubby 750 & Jet Mini *NM*
Re: Harrison Union Jubilee
1954 Delta Rockwell *NM*
Conover lathe *NM*
Jet Mini *NM*
Oneway 2436 and 1224, 2 WIlton pen lathes *NM*
Conover, Jet Mini, Craftsman mono-tube *NM*
Re: Conover, Jet Mini, Craftsman mono-tube
PM3520A, Jet Mini VS, Jet Mini. *NM*
Oneway2436,Delta Midi & Rockwell Hmcrft *NM*
Re: Lathes
Oneway 2436, Vic 200, Jet mini vs and an old atlas *NM*
Two Vicmarcs
Re: Lathes
Vicmarc VL300 *NM*
Re: Lathes
General International 16" swing x 42" between
Nova 3000
Re: Lathes *LINK*
Jet 1642 and Jet Mini *NM*
Powercraft, Fisch & custom bowl lathe...
Re: Lathes
Re: Lathes
Nova 3000 DC VariableSpeed *NM*
Old Delta 1236, Jet Mini and Oneway 2436 *NM*
Stubby S500 & Jet mini VS *NM*
General 26020 + Jet Mini but ...........
Re: General 26020 + Jet Mini but ...........
General 26020 + Jet Mini here too *NM*
Re: Lathes: Robust 25x28 and a Jet Mini *NM*
Re: Lathes Jet 1236 *NM*
Vicmarc VL300 which replaced Nova 3K *NM*
Karle Spinshop *PIC*
Re: Karle Spinshop
Jet 1236 -- good enough for now *NM*
Nova DVR and Jet Mini *NM*
Grizzly G0462 *NM*
Oneway 2436,Powernatic 3520a,Jet Mini *NM*
Delta X5 46-755X and HF 34706
Re: Jet 1642 EVS 1.5 hp (and a Delta 742) *NM*
Oneway 1016,Jet Mini,Robust 25x28 (Soooon) *NM*
Nova 3K Non-VS *NM*
General Maxi *NM*
General 260 and Conover *NM*
Re: Lathes
Re: Lathes
Re: Lathes
Nova DVR XP, Delta Millwalkee 12X48 *NM*
DVR XP and Jet Mini VS *NM* *NM*
Stubby 750 & General Maxi *NM*
Nova 3000 and Jet Mini *NM*
General 160-1 and Jet Mini *NM*
Oneway 2436 *NM*
Re: Lathes
Re: Lathes
General 26020VD *NM*
PM4224, OW 2440, Jet Mini *NM*
General 26020VDR *NM*
2 VB-36's, one Vicmarc VL300, and one VL-100 *NM*
PM3520a & Nova 3000 *NM*
Oneway 1018 NM *NM*
Re: Delta 1442 and PM3520 *NM*
PM3520B and Jet mini *NM*
Re: Lathes Woodfast both long and short bed
Re: Lathes Woodfast both long and short bed
Re: Lathes Woodfast both long and short bed
Re: Lathes
Re: Lathes
Jet Mini VS *NM*
3520B and Jet Mini VS *NM*
Jet Mini VS *NM*
Stubby 750 *NM*
Oneway1640 *NM*
PM 3520B *NM*
PM 3520a *NM*
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081