Turning Archive 2006

Subject:
Rocking chair *PIC*

Roger in MO
>Not having a digital camera, the picture is scanned. I'm sure the quality will be compromised. I just hope it will post.

This is one of two rockers I built several years ago from plans in WOOD magazine. The walnut came from a slab I chain sawed from the center of a 14" log about 1975. My original plans were to make a mantel but that never happened.

I built a primative duplicator to rough out the shape--then finished by scraping--the only method I knew at the time. Much sanding required!

If this posting works I will post some bowls etc as soon as the pictures are developed.

Thanks for looking.

Roger

Messages In This Thread

Rocking chair *PIC*
I've always shied away
Re: Rocking chair
Re: Rocking chair
Re: Rocking chair
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081