Turning Archive 2006

Subject:
deep hollowing problem

ken chase
>Somehow I missed the predrilled hole and fighting with the stub at the center of the hollowform. It's 12" deep. Is there a trick to remove this material? Also would appreciate suggestions of the best way to drill a 12" deep hole about 1" in diameter so I won't repeat.
Thanks

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081