Turning Archive 2006

Subject:
maple castle bowl *PIC*

john lucas
>Here is a maple bowl I made and cut castle like notches on the top using my router and the jig I made for the lathe. Indexing was done with a set of dividers. I made lines in the bottom of the cutouts with the wood burning tool and then colored it with a blue metallic marker.

Messages In This Thread

maple castle bowl *PIC*
Re: terminology
Re: maple castle bowl
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081