Turning Archive 2006
>I know this subject has come up before, but I'm interested in new opinions.
I've yet to find an acceptable way to sign my pieces (mostly bowls).
For a while I used my Dremel engraver, but it was sloppy and often hard to see.
Then I used a spiffy silver sharpie, but it rubbed right off.
A black fine tip sharpie works on about half my pieces and rubs off on the other half.
I usually use walnut oil with a walnut oil/wax finish coat on my bowls.
What's the best way to sign them?
"Life shouldn't be dull."