Turning Archive 2006

Subject:
Experimental candle holder *PIC*

DougJ in Crawfordsville, IN
>Inspired by some vases I saw at the St Louis wood show, I thought I'd give this (started out as a vase) candle holder a try. I used a left over piece of the box elder that I got from Kevin Gerstenecker last year. Measures at about 10" tall and 3" wide at the base bottom. No finish is applied as this was just an experiment.
Pucker factor on a scale of 1 to 10 is 7 1/2.
As always open comments are welcome and encouraged.

Messages In This Thread

Experimental candle holder *PIC*
another *NM* *PIC*
Re: another
good job
another *NM* *PIC*
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081