Turning Archive 2006

Subject:
Lacewood Dish *PIC*

Sam Dean
>Hi All,

This was kind of an experiment for me, from an article I read in one of the woodturning mags. The dish (bowl, plate, whatever...!) is about 8" in diameter and 1.75" thick, and each lobe is about 1" off center. Sanded to 800 grit and finished with a few coats of Watco danish oil, buffed on the beal. Comments and critiques are encouraged and appreciated (I have thick skin!). I'll post another view below.

Thanks,
Sam

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081