Turning Archive 2008

Subject:
Really great box Ron.
Response To:
Thread start ()

john lucas
>Mike I'm not sure how Ron does it but you can trim the shoulder of either the male or female side until it rotates far enough to align the grain. With a 16tpi thread a full 360 degree of revolution is only 1/16" so it doesn't take much.

Ron Is that a hand chased thread or do you use a threading machine?

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081