Turning Archive 2005

Subject:
Re: Different Steels
Response To:
Re: Different Steels ()

Wally Dickerman in Arizona
>Right Keith...I sharpen my gouges on a 120 grit wheel too. Gives a fairly smooth edge. I use a 60 grit wheel to put a burr on scrapers. For very hard dense woods I use the 120 for a finer burr. Gives a very smooth surface on the wood.

Wally

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081