Turning Archive 2005

Subject:
Re: Different Steels
Response To:
Different Steels ()

Keith Tompkins
>Hi Wally, the only difference I have noticed is that the 2060 and the Pro-PM gouges don't like to be sharpened on 60 grit low speed wheels. The edge is coarse and tends to break away when turning. 120 grit seems fine. As far as longer time between sharpening....maybe a bit, but not a tremendous amount.

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081