Turning Archive 2005

Subject:
Re: hole size on Jet face plate

Wally Dickerman at Green Valley, Az.
>Yes, by all means, drill the holes to accomodate up to size 10 screws. Size 12 would be even better. I recommend that you use pan head, self tapping screws.

Wally

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081