| Topic |
 | Green wood for pens | 12/31/2003, 6:39 pm |
| un wanted Gift | 12/31/2003, 11:09 am |
| Glue ups for spindles *PIC* | 12/31/2003, 9:27 am |
| WTD - Manual for Delta 46-840 Duplicator | 12/31/2003, 8:55 am |
| Newbie - Tool recommendations needed | 12/31/2003, 8:11 am |
| Thread insert | 12/31/2003, 7:53 am |
| Pregnant Lady Bowl Rack *PIC* | 12/31/2003, 7:46 am |
| which lathe for furniture making | 12/31/2003, 12:13 am |
| ringbox *PIC* | 12/30/2003, 11:01 pm |
| need a face plate | 12/30/2003, 10:50 pm |
| Found a small log *PIC* | 12/30/2003, 8:55 pm |
| Spots/Spalting Maple *PIC* | 12/30/2003, 8:52 pm |
| Jet Mini-Lathe pricing | 12/30/2003, 2:21 pm |
| grinding wheel question | 12/30/2003, 11:26 am |
| My little clock *LINK* | 12/30/2003, 7:53 am |
| I know I'm late to this party | 12/30/2003, 7:46 am |
| Powermatic 3520 | 12/30/2003, 12:21 am |
| Small walnut platter, bark edge | 12/29/2003, 10:38 pm |
| Conover Lathe | 12/29/2003, 9:52 pm |
| First Turning *PIC* | 12/29/2003, 7:48 pm |
| Would You Turn This?... *LINK* | 12/29/2003, 7:11 pm |
| wood lathes - which to choose? | 12/29/2003, 7:03 pm |
| Big Behemoth Babiga Burl | 12/29/2003, 6:13 pm |
| Hommade hollowing bars...(a bit long) *PIC* | 12/29/2003, 4:26 pm |
| ash | 12/29/2003, 3:40 pm |
| Another Chain Saw Question | 12/29/2003, 2:43 pm |
| What kind of steel for cutters? | 12/29/2003, 2:13 pm |
| Sawing bowl blanks from logs? | 12/29/2003, 2:07 pm |
| toolnut.com | 12/29/2003, 8:45 am |
| dye | 12/29/2003, 8:08 am |
| Stoppers *PIC* | 12/29/2003, 2:38 am |
| using dye on turnings | 12/29/2003, 1:14 am |
| MIL's Christmas Gift - Design Critique | 12/28/2003, 11:11 pm |
| Chop Saw vs. Table Saw Sled | 12/28/2003, 8:51 pm |
| Chain saw purchase | 12/28/2003, 2:21 pm |
| More than a bit surprised! | 12/28/2003, 10:51 am |
| snowed in | 12/28/2003, 9:29 am |
| Cherry Hollowform *PIC* | 12/27/2003, 11:37 pm |
| Spalted Maple Find *PIC* | 12/27/2003, 10:28 pm |
| Past couple of days... | 12/27/2003, 6:02 pm |
| ChainSAAAW | 12/27/2003, 4:53 pm |
| More turnings *PIC* | 12/27/2003, 2:29 pm |
| Deer Antler Pens | 12/27/2003, 2:27 pm |
| Request For Photos | 12/27/2003, 10:42 am |
| Grind angles | 12/27/2003, 10:09 am |
| Nova DVR Problem | 12/27/2003, 9:32 am |
| FYI (long) | 12/27/2003, 9:00 am |
| Raffan or Rowley or ? | 12/27/2003, 12:36 am |
| Today's Work *PIC* | 12/26/2003, 11:16 pm |
| Turning Osage Orange | 12/26/2003, 6:19 pm |
| Subscriptions/publications | 12/26/2003, 6:06 pm |
| Book: Contemporary Turned Wood | 12/26/2003, 3:44 pm |
| Need some bowl gouge advice | 12/26/2003, 3:20 pm |
| Communion Bowl (Pics) | 12/26/2003, 3:10 pm |
| Beal attachment | 12/26/2003, 12:13 pm |
| Russ Fairfield | 12/26/2003, 11:58 am |
| Hey BubbaBob. | 12/26/2003, 11:04 am |
| Decisions, Decisions?? | 12/26/2003, 9:17 am |
| World Earth Turning Conference? | 12/26/2003, 8:25 am |
| You guys are gonna think I'm on... | 12/26/2003, 7:49 am |
| Yellow poplar anyone? | 12/26/2003, 7:24 am |
| Chainsaw advice | 12/26/2003, 12:28 am |
| A small Christmas gift, PIC | 12/25/2003, 11:34 pm |
| Punky wood | 12/25/2003, 9:26 pm |
| Whatcha' get?? | 12/25/2003, 4:17 pm |
| Beautiful bowl Ellis... | 12/25/2003, 9:20 am |
| Walnut pens with pic *PIC* | 12/25/2003, 8:58 am |
| green alder | 12/25/2003, 8:30 am |
| Merry Christmas to all... *NM* | 12/24/2003, 11:47 pm |
| Hoist? | 12/24/2003, 11:29 pm |
| lathe duplicator | 12/24/2003, 6:31 pm |
| Christmas Wishes | 12/24/2003, 5:22 pm |
| Hey Joe in Cleveland... | 12/24/2003, 4:42 pm |
| MERRY CHRISTMAS ! | 12/24/2003, 4:25 pm |
| Marblewood | 12/24/2003, 1:31 pm |
| White Christmas *PIC* | 12/24/2003, 12:39 pm |
| bowl gouge newbie needs help! | 12/24/2003, 12:03 pm |
| Need Help Identifying Wood *PIC* | 12/24/2003, 11:59 am |
| Merry Christmas to all! | 12/24/2003, 8:48 am |
| Walnut pen | 12/24/2003, 8:45 am |
| ? Favorite bandsaw blade for roughing blanks? | 12/24/2003, 6:55 am |
| can I grind?? | 12/24/2003, 1:14 am |
| bold prediction..gloat | 12/24/2003, 1:03 am |
| Need a quicky sanding sealer | 12/23/2003, 9:18 pm |
| Shop floors | 12/23/2003, 8:05 pm |
| Hey Roger in Va... | 12/23/2003, 7:14 pm |
| A Beeg Tree! (Pics!) | 12/23/2003, 6:56 pm |
| Arrow and antler pen (pic) *PIC* | 12/23/2003, 4:08 pm |
| Antler and arrow pen ... *PIC* | 12/23/2003, 4:07 pm |
| Design Topic: What makes a good salad bowl? | 12/23/2003, 2:20 pm |
| (Rant) Motor won't start | 12/23/2003, 8:57 am |
| Bench Grinder for sharpening | 12/23/2003, 8:22 am |
| Try again *PIC* | 12/22/2003, 11:51 pm |
| Turned some new ones | 12/22/2003, 11:32 pm |
| Turning Afromosia? | 12/22/2003, 9:38 pm |
| Holidays | 12/22/2003, 8:55 pm |
| Need help | 12/22/2003, 7:54 pm |
| head/tail centers misaligned | 12/22/2003, 7:36 pm |
| VS Speed Motor on Mini-Lathe - Addendum | 12/22/2003, 4:45 pm |
| Ridgid Lathe | 12/22/2003, 3:55 pm |
| Hey Scott Greaves | 12/22/2003, 3:23 pm |
| Design/Critique of my cherry bowl | 12/22/2003, 2:36 pm |
| Pen Mill - CUSA Jr. G pen | 12/22/2003, 12:48 pm |
| Mold on rough-turned bowls | 12/22/2003, 12:32 pm |
| I ordered it. | 12/22/2003, 8:47 am |
| NEW SHOP SHOTS *LINK* | 12/22/2003, 8:04 am |
| Chuck Prices | 12/21/2003, 10:34 pm |
| Wife's first bowl *PIC* | 12/21/2003, 9:56 pm |
| Weekend doings *PIC* | 12/21/2003, 9:54 pm |
| Today's turnings... *LINK* *PIC* | 12/21/2003, 9:50 pm |
| Photography | 12/21/2003, 9:44 pm |
| New Drawer | 12/21/2003, 7:24 pm |
| Walker Turner/New Drawer | 12/21/2003, 7:20 pm |
| "Buyer Beware?" follow up (PIC) | 12/21/2003, 4:28 pm |
| Comments on shape please... | 12/21/2003, 3:07 pm |
| Design thoughts | 12/21/2003, 2:24 pm |
| lathe from the grave | 12/21/2003, 2:14 pm |
| Excalibur Pen Instructions, help! | 12/21/2003, 11:33 am |
| Black Cherry for Trade. | 12/21/2003, 11:24 am |
| Jet1014 - Getting ready to buy but... | 12/21/2003, 11:12 am |
| Made a couple of hand tools *PIC* | 12/21/2003, 1:34 am |
| hollowing dry or wet? | 12/20/2003, 11:41 pm |
| Got two turning books | 12/20/2003, 10:14 pm |
| Open Segment Christmas Ornament *PIC* | 12/20/2003, 9:15 pm |
| Santa came early!!! | 12/20/2003, 3:03 pm |
| Wild Cherry Bowl | 12/20/2003, 2:10 pm |
| tung oil finish problem | 12/20/2003, 1:57 pm |
| Bottlebrush Wood | 12/20/2003, 10:55 am |
| If I buy a Jet 1014, what... | 12/20/2003, 10:44 am |
| Hand Mirror | 12/20/2003, 8:26 am |
| china hand bell clapper ?? | 12/19/2003, 10:40 pm |
| Christmas Pens *PIC* | 12/19/2003, 10:21 pm |
| Pecan Natural Edge *PIC* | 12/19/2003, 10:16 pm |
| Christmas Pot *PIC* | 12/19/2003, 10:09 pm |
| Suggestion for Hickory Finish | 12/19/2003, 5:26 pm |
| Wood Stove - A question, and a trade | 12/19/2003, 2:11 pm |
| Walker Turner Lathe Photo *PIC* | 12/19/2003, 12:35 pm |
| Dominic Greco! | 12/19/2003, 11:58 am |
| My ultimate pen | 12/19/2003, 11:51 am |
| cocobolo: foodsafe? | 12/19/2003, 11:30 am |
| Defect in Oneway chuck | 12/19/2003, 11:10 am |
| Lacquer over Oil (Compatibility of finishes) | 12/19/2003, 10:35 am |
| Logging a big tree | 12/19/2003, 10:23 am |
| Help with wobbly spindle | 12/19/2003, 9:54 am |
| Somewhat OT, but a serious warning | 12/19/2003, 1:45 am |
| Bottle Stopper Turners - A question | 12/18/2003, 11:42 pm |
| Does C A glue go bad?? | 12/18/2003, 9:46 pm |
| turning palm pens | 12/18/2003, 8:21 pm |
| chucks *LINK* | 12/18/2003, 8:02 pm |
| Tonight's chat - finishing *NM* | 12/18/2003, 7:10 pm |
| Using Face Plate | 12/18/2003, 5:01 pm |
| Question for you turners... Jet1014 | 12/18/2003, 4:47 pm |
| stupid trick | 12/18/2003, 3:46 pm |
| Splatting Maple | 12/18/2003, 11:38 am |
| See what was in the old fence post *PIC* | 12/18/2003, 9:36 am |
| Is this a "buyer beware"? What would you do? | 12/18/2003, 8:41 am |
| Pepperwood | 12/17/2003, 11:29 pm |
| Repost of top pic. | 12/17/2003, 10:27 pm |
| I love my lathe...... | 12/17/2003, 9:42 pm |
| Wally's Wood *PIC* | 12/17/2003, 9:42 pm |
| Suggested RPM | 12/17/2003, 9:29 pm |
| Between Center | 12/17/2003, 9:08 pm |
| Oneway chuck problem | 12/17/2003, 8:43 pm |
| TD - What was the survey for? | 12/17/2003, 7:32 pm |
| Segmented bowl plans on Ebay *LINK* | 12/17/2003, 6:53 pm |
| Tonight's Turning Topic | 12/17/2003, 5:55 pm |
| But Don't Worry . . . | 12/17/2003, 3:55 pm |
| Proof #2 | 12/17/2003, 3:53 pm |
| Proof #1 | 12/17/2003, 3:48 pm |
| Odd spindle head size | 12/17/2003, 3:34 pm |
| Another Osage Orange *PIC* | 12/17/2003, 2:20 pm |
| Fraud allert... | 12/17/2003, 12:20 pm |
| Choice of Wood for Spindles | 12/17/2003, 11:10 am |
| cherry Crotch *PIC* | 12/17/2003, 10:34 am |
| Power Sanding - tool? | 12/17/2003, 8:43 am |
| email down | 12/17/2003, 8:16 am |
| Long,probably useless musings about tool purchases | 12/17/2003, 3:16 am |
| avocado tearout | 12/17/2003, 2:05 am |
| T T T T Tearout | 12/16/2003, 11:04 pm |
| McNaughton Center Saver | 12/16/2003, 7:12 pm |
| Hardened Faceplate Screw Source | 12/16/2003, 5:21 pm |
| Woodturning Tools | 12/16/2003, 3:47 pm |
| need help picking band saw. | 12/16/2003, 2:46 pm |
| David Propst,... | 12/16/2003, 2:11 pm |
| Special Tool ? | 12/16/2003, 11:14 am |
| Nova chuck key | 12/16/2003, 8:35 am |
| Auction: "Turning" (ha ha) up the heat | 12/16/2003, 7:53 am |
| Lathe Conversion | 12/16/2003, 7:14 am |
| Pens *PIC* | 12/16/2003, 1:46 am |
| My assistant *PIC* | 12/16/2003, 12:02 am |
| Walnut top *PIC* | 12/15/2003, 11:42 pm |
| Texas Style - And a BS Q. | 12/15/2003, 11:37 pm |
| Small cutting board *PIC* | 12/15/2003, 11:25 pm |
| Papa bear, momma, 2 baby bears | 12/15/2003, 9:36 pm |
| Mulberry=Choke Cherry? | 12/15/2003, 9:22 pm |
| More tormek | 12/15/2003, 9:08 pm |
| Wish List | 12/15/2003, 8:36 pm |
| Turning Topic for 12/17 | 12/15/2003, 8:11 pm |
| More on Walker Turner Lathe | 12/15/2003, 5:08 pm |
| BUFFING STATION ideas please | 12/15/2003, 2:05 pm |
| Grinding wheel size... | 12/15/2003, 12:17 pm |
| Jet mini lathe question | 12/15/2003, 12:06 pm |
| turning tool set question | 12/15/2003, 7:08 am |
| Christmas Reading from the A&R Team | 12/15/2003, 2:01 am |
| making chinese balls?? | 12/14/2003, 11:21 pm |
| 4 jaw chuck system- which is best | 12/14/2003, 9:48 pm |
| weed pots | 12/14/2003, 8:38 pm |
| Spindle Extender | 12/14/2003, 8:23 pm |
| Q: re silicone "corks" for wine stoppers | 12/14/2003, 7:01 pm |
| Reverse turning | 12/14/2003, 6:55 pm |
| Does Richard Raffan Have a Web Page? *NM* | 12/14/2003, 5:47 pm |
| Tool of the Week | 12/14/2003, 4:42 pm |
| Sanding past 400 - A thank you to Russ | 12/14/2003, 4:00 pm |
| Magnolia interest | 12/14/2003, 3:54 pm |
| Chuck insert problem | 12/14/2003, 2:25 pm |
| Shellac as a bowl finish. Any | 12/14/2003, 1:43 pm |
| Just curious | 12/14/2003, 10:50 am |
| Novice Turner | 12/14/2003, 10:01 am |
| Drilling turned spindle | 12/14/2003, 9:53 am |
| Views of a Norfolk Pine piece *PIC* | 12/14/2003, 2:13 am |
| Novice Bowl bottom question | 12/14/2003, 1:31 am |
| cookies *NM* | 12/13/2003, 8:29 pm |
| May have to keep this one! | 12/13/2003, 7:51 pm |
| Grinding a Finger nail profile | 12/13/2003, 7:51 pm |
| Grinding wheel suggestions | 12/13/2003, 7:48 pm |
| Osage Orange bowl.... *PIC* | 12/13/2003, 7:23 pm |
| Deft Lacquer | 12/13/2003, 6:56 pm |
| Done Good | 12/13/2003, 5:53 pm |
| Shaping bowl bottoms | 12/13/2003, 2:35 pm |
| OT - Crristmas Gloat | 12/13/2003, 12:43 pm |
| Turning Publications | 12/13/2003, 12:32 pm |
| A few questions (help) about my lathe please? | 12/13/2003, 10:45 am |
| Out of the closet *PIC* | 12/13/2003, 8:56 am |
| 2 *NM* *PIC* | 12/13/2003, 8:54 am |
| 3 *NM* *PIC* | 12/13/2003, 8:53 am |
| 4 *NM* *PIC* | 12/13/2003, 8:53 am |
| 5 *NM* *PIC* | 12/13/2003, 8:52 am |
| 6 *NM* *PIC* | 12/13/2003, 8:51 am |
| couple of crabapple turnings | 12/13/2003, 8:50 am |
| 7 *NM* *PIC* | 12/13/2003, 8:50 am |
| 8 *NM* *PIC* | 12/13/2003, 8:49 am |
| 9 *NM* *PIC* | 12/13/2003, 8:48 am |
| 10 *NM* *PIC* | 12/13/2003, 8:47 am |
| 11 *NM* *PIC* | 12/13/2003, 8:46 am |
| Cracks | 12/13/2003, 7:31 am |
| Some thoughts on design..long | 12/13/2003, 1:24 am |
| Two Thumbs Up *LINK* | 12/12/2003, 11:04 pm |
| last pic *PIC* | 12/12/2003, 9:28 pm |
| The next disaster *PIC* | 12/12/2003, 9:24 pm |
| How not to make thin cuts *PIC* | 12/12/2003, 9:19 pm |
| Powermatic vs Leigh | 12/12/2003, 8:47 pm |
| Music in the Shop? | 12/12/2003, 8:26 pm |
| Question for Veteran Turners | 12/12/2003, 7:02 pm |
| Gaaaa!! I'm being sucked in again! | 12/12/2003, 4:49 pm |
| Hut Crystal coat | 12/12/2003, 3:47 pm |
| Jet 1236 lathe speed handle | 12/12/2003, 3:45 pm |
| Buffing out Lacquer | 12/12/2003, 2:23 pm |
| Shop vac powered vacuum chuck (long) | 12/12/2003, 2:13 pm |
| Buffing? | 12/12/2003, 1:55 pm |
| 6" Riser Block Needed | 12/12/2003, 12:31 pm |
| Vacuum chuck | 12/12/2003, 12:27 pm |
| Walker Turner Lathe | 12/12/2003, 11:37 am |
| Seg. Salad Bowl *PIC* | 12/12/2003, 11:20 am |
| Ellsworth pics??? | 12/12/2003, 10:50 am |
| Jet Or Delta Mini? | 12/12/2003, 8:45 am |
| Maple Hollowform *PIC* | 12/12/2003, 8:43 am |
| goncalo bowl *PIC* | 12/12/2003, 8:22 am |
| Acrylic blank drilling problems..>> | 12/12/2003, 2:26 am |
| SWMBO's piece *PIC* | 12/12/2003, 12:44 am |
| This is Boring *PIC* | 12/12/2003, 12:34 am |
| turner's mystery | 12/12/2003, 12:29 am |
| Choice Woods | 12/12/2003, 12:17 am |
| natural edge | 12/11/2003, 11:22 pm |
| First Turning and First Turning Post *PIC* | 12/11/2003, 11:18 pm |
| Glaser Gouge Problems | 12/11/2003, 10:30 pm |
| Bit of a gloat...Craft Sale | 12/11/2003, 10:29 pm |
| Quick Release for Lathe Banjo Without One - How? | 12/11/2003, 10:24 pm |
| I had a 2 bowl day... *PIC* | 12/11/2003, 9:53 pm |
| glue for steel tenon? | 12/11/2003, 8:27 pm |
| Tonight's chat - finishing *NM* | 12/11/2003, 7:53 pm |
| Holy Magnolia Batman | 12/11/2003, 5:57 pm |
| Magnolia and Osage Orange bowls | 12/11/2003, 4:07 pm |
| Turning. | 12/11/2003, 4:06 pm |
| Todays turning... *PIC* | 12/11/2003, 3:31 pm |
| Cookie time NM *NM* | 12/11/2003, 2:29 pm |
| New Item on Benefit Auction Page *LINK* | 12/11/2003, 1:45 pm |
| WOOD OF THE WEEK - Goncalo Alves | 12/11/2003, 11:52 am |
| CA Glue Accelerator | 12/11/2003, 11:51 am |
| hollowing tools | 12/11/2003, 2:34 am |
| Miter saws and cutting segments | 12/11/2003, 12:40 am |
| I can't believe I'm doing this | 12/10/2003, 7:24 pm |
| Opinions on the Delta 46-715 | 12/10/2003, 4:56 pm |
| Slow speed wet grinder | 12/10/2003, 4:40 pm |
| Poulan WildThing | 12/10/2003, 4:35 pm |
| Had to move the partridge... *PIC* | 12/10/2003, 3:42 pm |
| Micro Mark's Mini Lathe | 12/10/2003, 3:17 pm |
| Bocote Pen and Pencil Set *LINK* | 12/10/2003, 3:03 pm |
| Bandsaw or Table saw | 12/10/2003, 12:44 pm |
| Trivia Contest for woodturning blanks | 12/10/2003, 12:02 pm |
| Chat topic for 12/10 Chucks | 12/10/2003, 9:51 am |
| Anniversary | 12/10/2003, 8:13 am |
| Advice?: goblet or wheel buffs | 12/10/2003, 6:24 am |
| chuck for mini lathe? | 12/9/2003, 9:25 pm |
| How many turnings... *LINK* *PIC* | 12/9/2003, 9:01 pm |
| Wow - Pencil / WoodNThings buffing system! | 12/9/2003, 8:48 pm |
| PM2035 | 12/9/2003, 8:10 pm |
| Today's turnings... *LINK* *PIC* | 12/9/2003, 6:51 pm |
| PM 2035 owners | 12/9/2003, 5:12 pm |
| Turning a large salad bowl safely *PIC* | 12/9/2003, 4:43 pm |
| Regrind Sorby Bowl Gouge | 12/9/2003, 4:35 pm |
| Gouge Decision - Hamlet or Glaser? | 12/9/2003, 2:45 pm |
| Claudette's Bowl... *PIC* | 12/9/2003, 1:50 pm |
| Ok, Pen Gurus | 12/9/2003, 1:29 pm |
| MORE SHOP SHOTS *LINK* | 12/9/2003, 11:02 am |
| Foodsafe stain | 12/9/2003, 10:47 am |
| Sorby Texturing Tool - how to finish the textured | 12/9/2003, 9:19 am |
| Nothing fancy, just some plain old pine *PIC* | 12/9/2003, 1:37 am |
| Turning blocks green wood | 12/8/2003, 11:37 pm |
| More Woodturning Newsletter | 12/8/2003, 11:12 pm |
| Speed-n-ease Friction wax - Recipe? | 12/8/2003, 8:38 pm |
| Another question | 12/8/2003, 7:38 pm |
| Toolnut.com | 12/8/2003, 6:22 pm |
| Turning for dollars | 12/8/2003, 5:30 pm |
| Jet Mini - belt type help | 12/8/2003, 5:21 pm |
| I learned Something! *Pic* | 12/8/2003, 4:15 pm |
| thanks for all the elm info | 12/8/2003, 1:41 pm |
| Shows are over! *PIC* | 12/8/2003, 11:49 am |
| OneWay 1640 Lathe | 12/8/2003, 10:16 am |
| NEW SHOP SHOTS *LINK* | 12/8/2003, 10:01 am |
| Question about Hamlet bowl gouges | 12/8/2003, 9:29 am |
| more on stool | 12/7/2003, 11:30 pm |
| Smaller Pic *LINK* | 12/7/2003, 9:36 pm |
| Stand for a mini lathe | 12/7/2003, 9:03 pm |
| Need comments on turning elm | 12/7/2003, 8:53 pm |
| Cigar Pen and Pencil Set *PIC* | 12/7/2003, 6:54 pm |
| Turning Topic for 12/10/03 | 12/7/2003, 6:04 pm |
| Tried it, liked it ---micromesh | 12/7/2003, 3:09 pm |
| Has anyone ever tried this? | 12/7/2003, 3:03 pm |
| Me and my stupid ideas (PIC) | 12/7/2003, 11:55 am |
| My First Christmas Ornament *PIC* | 12/7/2003, 10:19 am |
| Candlelight Dinner *PIC* *PIC* | 12/7/2003, 1:14 am |
| Something a little different *PIC* | 12/6/2003, 11:25 pm |
| Wood Gloat | 12/6/2003, 12:52 pm |
| Humble Pie | 12/6/2003, 10:58 am |
| hint 4 u other new guys looking 4 wood | 12/6/2003, 7:54 am |
| stabilizing pen blanks | 12/5/2003, 9:17 pm |
| Jigs and Tips?? | 12/5/2003, 8:40 pm |
| New to turning ? # 2 | 12/5/2003, 8:10 pm |
| Gueing Segmented Work | 12/5/2003, 7:49 pm |
| OT Major Rant! | 12/5/2003, 11:00 am |
| Tool tip of the Week | 12/5/2003, 9:41 am |
| How 'bout chisel brands? | 12/5/2003, 8:23 am |
| pin type moisture meeting question | 12/5/2003, 7:14 am |
| OT - Digital Photography | 12/5/2003, 6:53 am |
| diamon willow-does it exist?? | 12/5/2003, 2:07 am |
| Expoxy filled voids | 12/5/2003, 12:36 am |
| Sand paper rack *PIC* | 12/5/2003, 12:06 am |
| wall thickness | 12/4/2003, 11:36 pm |
| May be getting a lathe soon | 12/4/2003, 10:39 pm |
| Joined the AAW today! | 12/4/2003, 10:10 pm |
| Gouge Question | 12/4/2003, 7:19 pm |
| Re: Toothless again | 12/4/2003, 6:49 pm |
| More Pen Problems | 12/4/2003, 4:24 pm |
| Cleaning Hot Hide Glue from Sanding Belt | 12/4/2003, 2:16 pm |
| WANTED: tortoiseshell Decora pen blanks | 12/4/2003, 1:49 pm |
| turning goblets | 12/4/2003, 10:18 am |
| making balls and eggs | 12/4/2003, 10:15 am |
| Sanding chat I missed | 12/4/2003, 9:17 am |
| Tonight's finishing chat - cold weather | 12/4/2003, 8:53 am |
| A little refinement please.... | 12/4/2003, 8:05 am |
| wood of the week?? | 12/4/2003, 12:54 am |
| test *NM* | 12/3/2003, 11:59 pm |
| blade cleaner | 12/3/2003, 11:20 pm |
| Mimosa Wood -- Allergy Problem? | 12/3/2003, 10:47 pm |
| Phone Number | 12/3/2003, 10:29 pm |
| pen finish | 12/3/2003, 9:22 pm |
| WoodCraft Tool Rest Finger Buster - Not *PIC* | 12/3/2003, 7:49 pm |
| Pen problems | 12/3/2003, 5:01 pm |
| WOOD OF THE WEEK | 12/3/2003, 3:45 pm |
| My first turning (pic) *PIC* | 12/3/2003, 2:03 pm |
| Any left-handers here? | 12/3/2003, 1:34 pm |
| Variable Speed Retrofit on Mini-Lathe (LONG) | 12/3/2003, 10:24 am |
| Vicmarc 300 | 12/3/2003, 9:41 am |
| Tool Grinds Libary *LINK* | 12/3/2003, 6:59 am |
| Some new pieces--WOW members van ignore. | 12/3/2003, 2:14 am |
| perfume vial | 12/2/2003, 11:38 pm |
| Sorby Texturing Tool | 12/2/2003, 10:45 pm |
| Supernova Chuck Wobble | 12/2/2003, 5:38 pm |
| turning tool poll | 12/2/2003, 4:29 pm |
| Profit in Pen Making? | 12/2/2003, 1:13 pm |
| NEW SHOP SHOTS *LINK* | 12/2/2003, 12:40 pm |
| Live Centers, redux | 12/2/2003, 11:42 am |
| Wed Chat: Sanding Technique | 12/2/2003, 8:37 am |
| Turning Fresh Cut Manzanita | 12/2/2003, 3:12 am |
| does it work with ash?? | 12/2/2003, 1:16 am |
| Santa's sleigh leaves for the Carolinas | 12/1/2003, 10:09 pm |
| Hey, Monterey, CA | 12/1/2003, 10:02 pm |
| ebonizing walnut | 12/1/2003, 8:59 pm |
| Bowl question... | 12/1/2003, 6:36 pm |
| crack repair | 12/1/2003, 6:06 pm |
| Don Pencil phone? | 12/1/2003, 4:28 pm |
| Bowls I finished this weekend | 12/1/2003, 3:57 pm |
| Schmidt Ceramic Rollerball Refills | 12/1/2003, 3:38 pm |
| Chuck Jaw Question | 12/1/2003, 3:04 pm |
| Way OT: Transmission Cooler | 12/1/2003, 2:47 pm |
| Black mold on green LDD soaked bowl. | 12/1/2003, 12:13 pm |
| Using all the gouge | 12/1/2003, 11:02 am |
| David Ellsworth | 12/1/2003, 10:49 am |
| African Blackwood | 12/1/2003, 10:35 am |
| Mahogany | 12/1/2003, 8:48 am |
| OT - Digital Camera - LONG !! *LINK* | 12/1/2003, 7:36 am |
| Ryobi Detail Carver Part Needed *PIC* | 12/1/2003, 7:08 am |
| Oh my Ash!! | 12/1/2003, 2:59 am |
| Jet Mini Lathe Decision/Question | 12/1/2003, 1:25 am |
| Lea tool rest? | 11/30/2003, 11:20 pm |
| Reverse turning with Vacuum chuck *LINK* | 11/30/2003, 11:19 pm |
| Ellsowrth Gouge | 11/30/2003, 10:54 pm |
| end grain | 11/30/2003, 10:37 pm |
| klein belt replacements | 11/30/2003, 10:19 pm |
| Duck Call *PIC* | 11/30/2003, 9:42 pm |
| Pepper Mill *PIC* | 11/30/2003, 9:40 pm |
| Blackwood Source? | 11/30/2003, 8:57 pm |
| finishing bowls | 11/30/2003, 6:55 pm |
| Sometimes you can't win. | 11/30/2003, 6:52 pm |
| Greetings all... *PIC* | 11/30/2003, 5:19 pm |
| OT Eyeball Chat Equipment | 11/30/2003, 1:15 pm |
| Hey, Wally Dickerman *PIC* | 11/30/2003, 1:02 pm |
| Christmas gift one done | 11/30/2003, 11:59 am |
| my lathe must be broken, horizonal spindle travel | 11/30/2003, 11:56 am |
| Peppermill Turners | 11/30/2003, 10:03 am |
| 'notching' a rollerball pen | 11/30/2003, 3:19 am |
| experiment with green wood | 11/30/2003, 12:45 am |
| turning green | 11/29/2003, 11:11 pm |
| sanding natural edged bowls | 11/29/2003, 11:08 pm |
| Apology, no reply's needed please. | 11/29/2003, 10:39 pm |
| Tool Storage Rack | 11/29/2003, 9:10 pm |
| Don Pencil Scorpion/Stinger set | 11/29/2003, 9:09 pm |
| Today's turnings... *LINK* *PIC* | 11/29/2003, 8:39 pm |
| Mark and Mikey Show | 11/29/2003, 7:58 pm |
| American Woodturner | 11/29/2003, 7:50 pm |
| What's a good finish to use on bowls | 11/29/2003, 7:31 pm |
| Vase sanding | 11/29/2003, 7:19 pm |
| Repairing H&L pads | 11/29/2003, 7:14 pm |
| Anyone familiar with Behemoth Tools *LINK* | 11/29/2003, 3:10 pm |
| Husqvarna? | 11/29/2003, 10:15 am |
| Hollowing Tool Recommendation | 11/29/2003, 9:37 am |
| Finishing with ebony problem solved | 11/29/2003, 9:33 am |
| AAW Journal | 11/29/2003, 8:36 am |
| Spur Drive Problem | 11/29/2003, 6:12 am |
| Re:Yellow cedar burl pot | 11/29/2003, 3:46 am |
| Ellis, I TRUELY don't want to disagree, but... | 11/29/2003, 12:30 am |
| Trial and Error *PIC* | 11/28/2003, 11:49 pm |
| Need a reference source | 11/28/2003, 10:36 pm |
| Wed chat | 11/28/2003, 6:19 pm |
| Banjo Locking Levers | 11/28/2003, 3:25 pm |
| Oak Seg. Dragon *PIC* | 11/28/2003, 1:01 pm |
| Finishing problem with ebony. | 11/28/2003, 10:58 am |
| When are you good enough to teach? | 11/28/2003, 10:55 am |
| how do you decide what to cut/leave? | 11/28/2003, 8:37 am |
| Lidded Maple Bowl, pics | 11/28/2003, 6:30 am |
| laser guided?? | 11/28/2003, 1:52 am |
| Toothless | 11/27/2003, 11:54 pm |
| Turners in NW New Jersey? | 11/27/2003, 10:53 pm |
| Tonight's Chat - leftovers *NM* | 11/27/2003, 9:08 pm |
| Rollerball pen kit -HELP!! | 11/27/2003, 8:51 pm |
| Super Nova Chuck $249.56 *LINK* | 11/27/2003, 8:24 pm |
| pics of maple bowl *PIC* | 11/27/2003, 9:52 am |
| Hazelnut wood available | 11/27/2003, 5:16 am |
| First hollow form vessels!!! *PIC* | 11/27/2003, 3:33 am |
| getting my pics on this site to! | 11/27/2003, 12:28 am |
| AAW Journal and Pens | 11/26/2003, 11:06 pm |
| "Windsor Design" chisels | 11/26/2003, 9:26 pm |
| first maple bowl *LINK* | 11/26/2003, 6:21 pm |
| I made the Front Page | 11/26/2003, 5:48 pm |
| May All Your Turkeys | 11/26/2003, 2:50 pm |
| Reverse Turning: Safety Issues | 11/26/2003, 11:27 am |
| Christmas Present *LINK* | 11/26/2003, 11:16 am |
| chatting & WebTv | 11/26/2003, 11:13 am |
| Way, way, way OT - Need translation | 11/26/2003, 7:20 am |
| Reversing lathe | 11/26/2003, 1:10 am |
| securing chuck on spindle in reverse | 11/25/2003, 11:07 pm |
| Beall v Don Pencil buffing systems | 11/25/2003, 9:51 pm |
| bowl gouge | 11/25/2003, 9:05 pm |
| Chucks | 11/25/2003, 8:19 pm |
| gantry idesa | 11/25/2003, 8:12 pm |
| More Pen Questions | 11/25/2003, 6:33 pm |
| Morse Taper Extension | 11/25/2003, 5:51 pm |
| Molded wood | 11/25/2003, 3:37 pm |
| Cookie *NM* | 11/25/2003, 1:40 pm |
| Where to get wood - next question | 11/25/2003, 12:35 pm |
| help!!! with sorby fingernail jig. | 11/25/2003, 11:19 am |
| Several pen questions (kinda long) | 11/25/2003, 10:22 am |
| Eduardo Sarmiento Hall Turnings (very big images) | 11/25/2003, 8:51 am |
| V8 chainsaw *LINK* | 11/25/2003, 8:19 am |
| Where to get wood? | 11/25/2003, 8:14 am |
| Green wood problem | 11/25/2003, 7:41 am |
| Pop bottle cap solution. | 11/25/2003, 12:45 am |
| Uh oh... *LINK* | 11/24/2003, 10:57 pm |
| New member *PIC* | 11/24/2003, 10:05 pm |
| A quick survey | 11/24/2003, 10:02 pm |
| American Woodturner Mag gets pen'd *LINK* *PIC* | 11/24/2003, 10:01 pm |
| Peppermills | 11/24/2003, 4:53 pm |
| pict to see *LINK* | 11/24/2003, 3:34 pm |
| Golden Spread Woodcarvers 2003 show/sell/competit *PIC* | 11/24/2003, 2:03 pm |
| Seeking sawmills | 11/24/2003, 12:49 pm |
| New to Turning | 11/24/2003, 11:38 am |
| Posting Photos | 11/24/2003, 9:52 am |
| Cleaning Bandsaw Blades | 11/24/2003, 8:47 am |
| Tekna-Mercury | 11/24/2003, 8:23 am |
| Shop built bowl steady | 11/23/2003, 9:29 pm |
| Christmas Ornament *LINK* *PIC* | 11/23/2003, 8:49 pm |
| It's getting to be that season again*pics*...>>> | 11/23/2003, 4:24 pm |
| Power sanding | 11/23/2003, 2:49 pm |
| Beads and More Beads... *PIC* | 11/23/2003, 1:25 pm |
| Topic for Wed. chat? | 11/23/2003, 11:07 am |
| Two Bowls | 11/23/2003, 10:12 am |
| What is it all worth???-longish | 11/23/2003, 1:25 am |
| Hi Mike Brazeau | 11/23/2003, 12:33 am |
| Walnut Bowl | 11/22/2003, 7:12 pm |
| Large Spindle Gouge 2 *PIC* | 11/22/2003, 5:55 pm |
| Large Spindle Gouge 1 3/4 *PIC* | 11/22/2003, 5:53 pm |
| Reverse turning chuck - How to make one | 11/22/2003, 5:39 pm |
| Old Grinding Wheels | 11/22/2003, 3:29 pm |
| Lidded Cherry Bowl, pics | 11/22/2003, 3:09 pm |
| Recent Turning Results, pics | 11/22/2003, 2:49 pm |
| Chain Saw rec please | 11/22/2003, 12:31 pm |
| I have erred - I see the light | 11/22/2003, 11:56 am |
| Unicorn Bowl II *PIC* | 11/22/2003, 10:33 am |
| New Internet Woodworking TV Show *LINK* | 11/21/2003, 8:11 pm |
| Jennifer- How did | 11/21/2003, 5:38 pm |
| Osolnik spindle gouge | 11/21/2003, 4:21 pm |
| Roughing Gouge | 11/21/2003, 2:06 pm |
| 2nd annual Show at work *PIC* | 11/21/2003, 1:59 pm |
| diamond wood question | 11/21/2003, 11:41 am |
| Prismacolor sale | 11/21/2003, 10:57 am |
| Tonight's chat - finishing *NM* | 11/20/2003, 8:46 pm |
| jet 1642 problems | 11/20/2003, 8:16 pm |
| Beall Buff System? | 11/20/2003, 8:07 pm |
| Sorby Hooker Auction..1 HR to go! *NM* | 11/20/2003, 8:06 pm |
| Several assorted bowls - Part1 | 11/20/2003, 6:31 pm |
| More turnings for the bazaar. | 11/20/2003, 6:03 pm |
| WOOD OF THE WEEK - Purpleheart | 11/20/2003, 4:43 pm |
| CA dangers | 11/20/2003, 2:27 pm |
| Comprehensive Article on Handsaw Filing | 11/20/2003, 12:02 pm |
| Now for something really different! *PIC* | 11/20/2003, 10:47 am |
| A few pictures | 11/20/2003, 10:30 am |
| Heating the shop | 11/20/2003, 9:00 am |
| Stabilize Spalted wood | 11/20/2003, 8:51 am |
| I got the end grain blues | 11/20/2003, 8:50 am |
| green birch | 11/20/2003, 3:09 am |
| Jacques Vesery class | 11/20/2003, 12:21 am |
| homemade tool rest | 11/19/2003, 11:28 pm |
| A question of flutes. | 11/19/2003, 11:13 pm |
| Unicorn Bowl *PIC* | 11/19/2003, 10:43 pm |
| Powermatic 45 | 11/19/2003, 7:38 pm |
| Disappearing Cracks.... | 11/19/2003, 4:37 pm |
| Reminder..Sorby Hooker Tool Auction..... *PIC* | 11/19/2003, 3:28 pm |
| Chuck? | 11/19/2003, 3:05 pm |
| NEW SHOP SHOTS | 11/19/2003, 11:55 am |
| More Gent's pen questions | 11/19/2003, 10:59 am |
| Armorall on Wood? | 11/19/2003, 9:24 am |
| glue | 11/18/2003, 10:06 pm |
| Help with micro-mesh(longish)? | 11/18/2003, 9:24 pm |
| grinding wheel bushing | 11/18/2003, 9:17 pm |
| "Ladies and Gentlemen, we have . ." | 11/18/2003, 7:26 pm |
| Mike Mahoney class | 11/18/2003, 4:28 pm |
| Segmented Bowl *PIC* | 11/18/2003, 4:03 pm |
| mini lathes | 11/18/2003, 3:49 pm |
| Question on flashlight kits | 11/18/2003, 12:17 pm |
| Does anyone own a Vicmarc VL100 Comp..>> | 11/18/2003, 8:56 am |
| 9 New Articles & Tips | 11/18/2003, 8:25 am |
| Wed night turning topic, 11/19 | 11/18/2003, 8:14 am |
| Beaver Hollowing Tool | 11/18/2003, 5:41 am |
| teak | 11/17/2003, 11:02 pm |
| Food-Safe?? *LINK* | 11/17/2003, 10:56 pm |
| Pepper Mills | 11/17/2003, 9:34 pm |
| tv show *LINK* | 11/17/2003, 8:39 pm |
| Shields & Crowns bowl *PIC* | 11/17/2003, 5:48 pm |
| Lathe Decision | 11/17/2003, 5:24 pm |
| Problems with DC motor on Nova 3000 | 11/17/2003, 4:35 pm |
| New Auction Item...Sorby Hooker Tool *NM* | 11/17/2003, 3:48 pm |
| weekend turning projects | 11/17/2003, 1:28 pm |
| Jet mini tailstock slipping | 11/17/2003, 12:08 pm |
| background cloth | 11/17/2003, 11:27 am |
| Triton Resp Review | 11/17/2003, 10:04 am |
| Turning jigs??? | 11/16/2003, 10:41 pm |
| Turning Tools | 11/16/2003, 10:39 pm |
| Ok now what? Help plz and pics | 11/16/2003, 8:43 pm |
| Woodburning tools | 11/16/2003, 7:18 pm |
| Please take one more look at the Auction Page! | 11/16/2003, 4:22 pm |
| OT...Wood burning stoves... | 11/16/2003, 1:35 pm |
| Willow Wood | 11/16/2003, 12:43 pm |
| Looking for Flatware in all the wrong places | 11/15/2003, 8:34 pm |
| Jet canister dust collector | 11/15/2003, 8:09 pm |
| Will Epoxy Work? | 11/15/2003, 4:06 pm |
| Cedar Bowl Finish | 11/15/2003, 3:36 pm |
| Wood from Bahamas?? | 11/15/2003, 12:01 pm |
| Grinding Wheels | 11/14/2003, 11:19 pm |
| Chemistry Anyone? | 11/14/2003, 10:23 pm |
| ornament photography *PIC* | 11/14/2003, 8:50 pm |
| Re: New Machine *LINK* *PIC* | 11/14/2003, 6:32 pm |
| Spalting worries No.2 | 11/14/2003, 4:50 pm |
| Spalted worries No.1 | 11/14/2003, 4:48 pm |
| Atlanta Airport Turning Exhibit | 11/14/2003, 4:39 pm |
| acces denied on harvest attempt 1 | 11/14/2003, 3:00 pm |
| Finishing | 11/14/2003, 2:24 pm |
| Chuck gets stuck (rhyme somewhat intentional) | 11/14/2003, 2:23 pm |
| Finishing | 11/14/2003, 2:23 pm |
| Segmented Turning: A Complete Guide By Ron Hampton | 11/14/2003, 1:44 pm |
| Photographing Ornaments | 11/14/2003, 12:21 pm |
| Walnut lidded vessel *PIC* | 11/14/2003, 11:25 am |
| Walnut chalice & more *PIC* | 11/14/2003, 11:09 am |
| Delta 8" Variable speed Grinder | 11/14/2003, 10:03 am |
| Chuck advice | 11/14/2003, 6:04 am |
| Getting grind right aargh!! | 11/14/2003, 4:55 am |
| More Mesquite *PIC* | 11/13/2003, 11:46 pm |
| Mesquite "Find" *PIC* | 11/13/2003, 11:44 pm |
| Pen turning problems | 11/13/2003, 10:03 pm |
| Tonight's chat - finishing *NM* | 11/13/2003, 8:54 pm |
| Harvesting turning blocks | 11/13/2003, 8:47 pm |
| NEW SHOP SHOTS | 11/13/2003, 8:30 pm |
| Jet 1642 | 11/13/2003, 7:10 pm |
| Glaser-Cold Handle Solution *PIC* | 11/13/2003, 5:56 pm |
| Woodstock International tools ? *LINK* | 11/13/2003, 5:08 pm |
| Christmas Ornament "design" rules | 11/13/2003, 3:22 pm |
| GTH, I'm curious about the funnel | 11/13/2003, 3:16 pm |
| Vacuum Heat Warning | 11/13/2003, 2:06 pm |
| Wood of the Week: Padauk | 11/13/2003, 8:33 am |
| Craftsman lathe | 11/13/2003, 1:51 am |
| Quick-shopping to do please HELP! Thanks | 11/13/2003, 1:14 am |
| Segmented turnings | 11/12/2003, 10:52 pm |
| C A glue won' always stick ??? | 11/12/2003, 10:05 pm |
| Sun God bowl segmented *PIC* | 11/12/2003, 8:11 pm |
| Buffalo Jar - Segmented *PIC* | 11/12/2003, 4:02 pm |
| Dumb Question #999 - SuperNova Chuck Problem | 11/12/2003, 1:12 pm |
| Snow man in pine *PIC* | 11/12/2003, 10:34 am |
| Baby Rattle w/captive rings *PIC* | 11/12/2003, 10:29 am |
| Santa Claus | 11/12/2003, 8:10 am |
| Wenge and Zebrawood | 11/12/2003, 2:08 am |
| Another Opinion Please - New General Lathe *PIC* | 11/11/2003, 11:20 pm |
| New Tool Rest | 11/11/2003, 11:14 pm |
| Short review of Glaser 5/8" deep bowl gouge | 11/11/2003, 9:11 pm |
| New Jet Mini VS Price | 11/11/2003, 8:17 pm |
| Review: Vega 2400 Bowl Lathe - Long *LINK* | 11/11/2003, 3:04 pm |
| budget sharpening | 11/11/2003, 2:53 pm |
| What size bowl gouge do I need? | 11/11/2003, 2:09 pm |
| Turning Supplies in Toronto Area | 11/11/2003, 1:56 pm |
| Bowl/Spindle gouge 1st time sharpening problem | 11/11/2003, 1:42 pm |
| OT-Veterans Day | 11/11/2003, 12:01 pm |
| Vega Model 24 | 11/11/2003, 11:51 am |
| How to save segmented piece? *PIC* | 11/11/2003, 11:03 am |
| Need advise on glue selection | 11/11/2003, 10:24 am |
| Opinions - Delta 16" steel bed lathe | 11/11/2003, 8:56 am |
| Triton Respirator | 11/11/2003, 8:39 am |
| Treadle lathe *PIC* | 11/11/2003, 8:11 am |
| More grinds are in *LINK* | 11/11/2003, 7:50 am |
| Powermatic Model 45 | 11/11/2003, 5:14 am |
| jet 1642 lathe | 11/10/2003, 10:59 pm |
| Refrig compr for vac chucking | 11/10/2003, 8:54 pm |
| Wednesday Nite Chatroom | 11/10/2003, 5:26 pm |
| What to do..Laval (Montreal), Quebec | 11/10/2003, 5:21 pm |
| Norm's new lathe *LINK* | 11/10/2003, 4:53 pm |
| inside out demo | 11/10/2003, 4:24 pm |
| Woodburning tools | 11/10/2003, 4:21 pm |
| The Woodsman in Stockton *LINK* | 11/10/2003, 2:18 pm |
| John Jordan at Frist? | 11/10/2003, 1:53 pm |
| Changing Headstock Bearings - Jet Mini | 11/10/2003, 11:00 am |
| Sad day for Oklahoma turners | 11/10/2003, 10:51 am |
| Inline industries banner | 11/10/2003, 9:38 am |
| Do I deserve the Dummy Of The Year award for this? | 11/10/2003, 9:07 am |
| Auction Update (Long) *PIC* | 11/10/2003, 9:02 am |
| Info on upgrade for power visor? | 11/10/2003, 8:35 am |
| walking stick carver needed | 11/10/2003, 8:00 am |
| Gouge Catches | 11/10/2003, 2:33 am |
| Anybody have any experiences..>> | 11/10/2003, 1:48 am |
| woodburning tools *LINK* *PIC* | 11/9/2003, 8:47 pm |
| Problem Spalted Wood *PIC* | 11/9/2003, 6:55 pm |
| Russ (and others) Finishing Question | 11/9/2003, 2:31 pm |
| Grinds? | 11/9/2003, 12:16 pm |
| 2x4 Contest Winner!!! | 11/9/2003, 11:00 am |
| Speed, Spalted and Window (long) | 11/9/2003, 9:08 am |
| Spalted Maple | 11/8/2003, 11:15 pm |
| more about making my own turning tools | 11/8/2003, 11:12 pm |
| making my own tools | 11/8/2003, 8:17 pm |
| Is this a "Stubby" Lathe? *NM* *LINK* | 11/8/2003, 7:41 pm |
| Size hole in weed pots? | 11/8/2003, 3:36 pm |
| Ellis opening Page | 11/8/2003, 8:51 am |
| lathe comparison/grizzly/jet | 11/8/2003, 12:32 am |
| Drilling Decora pen blanks | 11/8/2003, 12:05 am |
| Centering-- Glue blocks | 11/7/2003, 11:54 am |
| New Shop Shots (Repost) *LINK* | 11/7/2003, 11:47 am |
| aargghh ? repair crack in green wood? | 11/7/2003, 10:04 am |
| another PM3520 spindle lock fix *PIC* | 11/7/2003, 8:18 am |
| Inlay Situation Help | 11/6/2003, 11:25 pm |
| New Auction! | 11/6/2003, 9:40 pm |
| Newbie, how to prevent catches | 11/6/2003, 8:41 pm |
| Next week's turning chat | 11/6/2003, 8:33 pm |
| hey Dominic G. *PIC* | 11/6/2003, 8:30 pm |
| Bandsaw fence | 11/6/2003, 5:32 pm |
| Kudos to Brad Packard and Best Wood Tools | 11/6/2003, 4:05 pm |
| What is the best way to store blanks? | 11/6/2003, 2:53 pm |
| Thanks for the chat after the chat | 11/6/2003, 2:11 pm |
| Tonight's chat - finishing *NM* | 11/6/2003, 2:07 pm |
| Glue Block ????? | 11/6/2003, 1:26 pm |
| When is a roughed out bowl ready? | 11/6/2003, 1:25 pm |
| Thanks to Ellis | 11/6/2003, 11:10 am |
| Last Night's Chat | 11/6/2003, 9:53 am |
| stretcher holes in legs, help | 11/6/2003, 8:52 am |
| Wood of the Week - Cherry | 11/6/2003, 8:43 am |
| Wonderful video for beginers *PIC* | 11/6/2003, 12:42 am |
| corian | 11/5/2003, 7:01 pm |
| Saving the Ellsworth Chat | 11/5/2003, 6:46 pm |
| Warpage in Platters | 11/5/2003, 6:18 pm |
| Kokopelli Pecan Bowl *PIC* | 11/5/2003, 6:00 pm |
| Elk vs Deer Antler for pens | 11/5/2003, 4:11 pm |
| PM 3520 Spindle lock | 11/5/2003, 12:43 pm |
| CA process for Finish | 11/5/2003, 12:09 pm |
| sandpaper | 11/5/2003, 12:09 pm |
| Finish For Pens Turned From Antler?? | 11/5/2003, 11:59 am |
| Basham Hollowing Tool | 11/5/2003, 11:30 am |
| Foredom or Substitute? | 11/5/2003, 9:23 am |
| Delta 14" Bandsaw | 11/5/2003, 8:17 am |
| Chat Tonight! Special Guest David Ellsworth | 11/5/2003, 7:19 am |
| PM 3520 owners | 11/4/2003, 11:45 pm |
| An excellent company to deal with | 11/4/2003, 11:36 pm |
| tool rest drill rod | 11/4/2003, 11:23 pm |
| sharpening a skew | 11/4/2003, 10:22 pm |
| turning bowls (help) | 11/4/2003, 10:20 pm |
| skewing a cylinder, help | 11/4/2003, 6:23 pm |
| Delta bandsaw 28-475X | 11/4/2003, 6:12 pm |
| Hey Wally! | 11/4/2003, 5:46 pm |
| I saw Norm turn a bowl | 11/4/2003, 5:39 pm |
| Which way did it go? *PIC* | 11/4/2003, 3:55 pm |
| Static Electricity... | 11/4/2003, 3:08 pm |
| Turning Corian tips? | 11/4/2003, 1:47 pm |
| Bandsaw blade dullness | 11/4/2003, 10:43 am |
| Woodburning advice needed. | 11/4/2003, 10:03 am |
| Please vote: 2x4 finalists in events forum *NM* | 11/4/2003, 8:20 am |
| Reminder | 11/4/2003, 7:57 am |
| Your Takes on Safety Air Visors | 11/3/2003, 9:04 pm |
| Low flying UFO *PIC* | 11/3/2003, 8:12 pm |
| couple of Pictures *PIC* | 11/3/2003, 6:38 pm |
| Soap Meter Help | 11/3/2003, 5:05 pm |
| spindle turning help, Help! | 11/3/2003, 4:58 pm |
| New Vase *PIC* | 11/3/2003, 12:09 pm |
| N.C. Woodturning Symposium | 11/3/2003, 11:40 am |
| World's most expensive wood. *LINK* | 11/3/2003, 11:29 am |
| Question about segmented turnings | 11/3/2003, 8:41 am |
| Some new pens *PIC* | 11/3/2003, 12:37 am |
| New to turning | 11/2/2003, 11:41 pm |
| Drop Finial Ornaments *PIC* | 11/2/2003, 10:32 pm |
| Dust collection | 11/2/2003, 9:38 pm |
| Reintroduction | 11/2/2003, 8:00 pm |
| Turned Ambrosia Maple Box, pics | 11/2/2003, 7:46 pm |
| Indexing on Vicmarc Chuck | 11/2/2003, 6:25 pm |
| Is anything more painful than watching Norm turn? | 11/2/2003, 5:20 pm |
| silicone caulking | 11/2/2003, 4:54 pm |
| Anybody seen one of these? | 11/2/2003, 4:30 pm |
| OT video camera | 11/2/2003, 4:01 pm |
| 2x4 Contest Finalists in Events Forum *NM* | 11/2/2003, 12:25 pm |
| New to Woodturning Questions | 11/2/2003, 12:16 pm |
| lathe duplicators *LINK* | 11/2/2003, 11:51 am |
| Vari-Grind setup | 11/2/2003, 11:08 am |
| Hoe you I get this !@#$!$ waste block off! | 11/2/2003, 10:45 am |
| thanks - hurtin' hands tips, and a pic | 11/2/2003, 10:30 am |
| Jet Pen Lathe Observations | 11/2/2003, 12:14 am |
| Interchangeable jaw sets | 11/1/2003, 8:09 pm |
| Newbie Lathe ?'s (longish) | 11/1/2003, 6:41 pm |
| What kind of wax | 11/1/2003, 5:52 pm |
| QUESTIONS, | 11/1/2003, 5:43 pm |
| Soap Meter? | 11/1/2003, 12:14 pm |
| Tool Rests for the PM 3520 | 11/1/2003, 12:40 am |
| homemade mini tool rest | 10/31/2003, 10:38 pm |
| Lighting | 10/31/2003, 10:17 pm |
| My hands hurt, badly, from turning | 10/31/2003, 6:38 pm |
| Source for Australian Woods | 10/31/2003, 3:59 pm |
| Question about value of old lathe to someone else | 10/31/2003, 1:47 pm |
| Pens and Pine Burl *PIC* | 10/31/2003, 1:11 pm |
| Grinder Mounting Height? | 10/31/2003, 12:08 pm |
| Walnut Oil finish? Help Russ! | 10/31/2003, 11:51 am |
| Lacquer Thinner -- Question for Russ Fairfield | 10/31/2003, 10:55 am |
| Cheap Variable Speed DC Motor | 10/31/2003, 10:48 am |
| Broken Gouge Replaced | 10/31/2003, 10:31 am |
| Thanks for advice on buffing | 10/31/2003, 9:09 am |
| insurance? | 10/30/2003, 11:39 pm |
| A Good Deed Gets Recognized | 10/30/2003, 9:53 pm |
| centering centers | 10/30/2003, 9:39 pm |
| DISCLAIMER | 10/30/2003, 8:45 pm |
| big sale | 10/30/2003, 8:01 pm |
| OT, Woodcraft, pumpkins *PIC* | 10/30/2003, 6:20 pm |
| Well as promised, my mess...err workshop...>> *PIC* | 10/30/2003, 6:00 pm |
| Last Night's Chatroom | 10/30/2003, 5:10 pm |
| turning | 10/30/2003, 3:38 pm |
| Is there a color code for Air hardening steel? | 10/30/2003, 3:05 pm |
| Lathe tool storage options poll | 10/30/2003, 2:43 pm |
| AAW site ques... | 10/30/2003, 2:17 pm |
| Poulan chainsaw | 10/30/2003, 2:15 pm |
| Ellsworth's "chapeau"? | 10/30/2003, 2:02 pm |
| tonight's chat - finishing *NM* | 10/30/2003, 1:40 pm |
| Some New Pens | 10/30/2003, 1:24 pm |
| Pencil Kits - Lead jam | 10/30/2003, 12:35 pm |
| Cherry wood | 10/30/2003, 12:21 pm |
| Dremel Contour Sander *LINK* | 10/30/2003, 10:45 am |
| Jet Mini Variable Speed? | 10/30/2003, 10:43 am |
| WOOD OF THE WEEK - Walnut | 10/30/2003, 9:39 am |
| Shop Pics #3 *NM* *PIC* | 10/30/2003, 7:21 am |
| Shop Pics #2 *NM* *PIC* | 10/30/2003, 7:20 am |
| Shop Pics #1 *PIC* | 10/30/2003, 7:19 am |
| Speaking of Wood Jennifer | 10/30/2003, 6:26 am |
| Pic #4 (last) *PIC* | 10/29/2003, 11:56 pm |
| Pic #3 *PIC* | 10/29/2003, 11:53 pm |
| Pic #2 *PIC* | 10/29/2003, 11:50 pm |
| My Shop Pics *PIC* | 10/29/2003, 11:48 pm |
| Question onRetrofitting a Variable DC drive | 10/29/2003, 11:33 pm |
| SW Segmented Turtle bowl *PIC* | 10/29/2003, 11:29 pm |
| tool rests | 10/29/2003, 8:55 pm |
| My Shop | 10/29/2003, 8:29 pm |
| types of tool steel for chisels | 10/29/2003, 3:56 pm |
| My shop Pics | 10/29/2003, 3:39 pm |
| Cracked roughed bowls. Are these *PIC* | 10/29/2003, 2:46 pm |
| ***Help Wanted*** | 10/29/2003, 1:01 pm |
| Tailstock Weight | 10/29/2003, 12:19 pm |
| Reminder: 2x4 Contest Voting on Events Forum *NM* | 10/29/2003, 9:33 am |
| Grinds LIbrary | 10/29/2003, 5:37 am |
| How to use this burl? w/pic | 10/29/2003, 12:46 am |
| New Scraper in my Toolbox/pics | 10/29/2003, 12:38 am |
| Parting Tool Grind w/pics | 10/29/2003, 12:10 am |
| Kelton Balancer Review Draft | 10/28/2003, 10:41 pm |
| My Shop, pics | 10/28/2003, 8:36 pm |
| Terry Daniel's Shop Pics | 10/28/2003, 8:17 pm |
| How long is your..? | 10/28/2003, 8:16 pm |
| PM 3520 vibration! | 10/28/2003, 8:05 pm |
| Grind Pic *PIC* | 10/28/2003, 4:21 pm |
| Georgia Hack?? | 10/28/2003, 2:29 pm |
| Buffing lacquer...help! | 10/28/2003, 2:11 pm |
| Pen Kits | 10/28/2003, 12:46 pm |
| buggy wood help please | 10/28/2003, 11:59 am |
| Excellent Turning Book | 10/28/2003, 11:34 am |
| Shop Pic 2 allready said is messy *PIC* | 10/28/2003, 10:56 am |
| Messy shop photo 1 *PIC* | 10/28/2003, 10:52 am |
| last pic *PIC* | 10/28/2003, 9:30 am |
| 2nd shop post *PIC* | 10/28/2003, 9:22 am |
| My shop Pics *PIC* | 10/28/2003, 9:20 am |
| 5 New Articles and Tips | 10/28/2003, 1:53 am |
| Tool handling question | 10/27/2003, 11:27 pm |
| something new on links page | 10/27/2003, 11:23 pm |
| 1st Prize Gloat *PIC* | 10/27/2003, 11:06 pm |
| End grain pen blank glue ups | 10/27/2003, 11:02 pm |
| Help - Delta Lathe | 10/27/2003, 10:52 pm |
| Xmas Oranament size | 10/27/2003, 10:50 pm |
| Pic two *PIC* | 10/27/2003, 10:47 pm |
| My shop pics *PIC* | 10/27/2003, 10:33 pm |
| Atlanta, GA Trip | 10/27/2003, 9:24 pm |
| Redwood for Turning? | 10/27/2003, 9:02 pm |
| Used Delta Lathe | 10/27/2003, 8:56 pm |
| Tool of the Week | 10/27/2003, 8:09 pm |
| Recent Piece *PIC* | 10/27/2003, 2:04 pm |
| antique lathe for sale | 10/27/2003, 11:18 am |
| Speaking of pens... | 10/27/2003, 9:30 am |
| No thanks honey, I can do it on my own.... | 10/27/2003, 9:12 am |
| Hout Bowl Skews | 10/27/2003, 9:07 am |
| Please Vote - 2x4 contest PICS in Events Forum *NM* | 10/27/2003, 8:48 am |
| NEW SHOP SHOT *LINK* | 10/27/2003, 8:03 am |
| Beginning Turners *LINK* *PIC* | 10/27/2003, 7:13 am |
| Ya'll made me clean up my shop! | 10/26/2003, 9:32 pm |
| ice turning | 10/26/2003, 8:52 pm |
| Prisma Colored Markers | 10/26/2003, 8:24 pm |
| Totally Turning | 10/26/2003, 8:15 pm |
| Don Pencil Prices At Woods Works Show? | 10/26/2003, 7:56 pm |
| Tung Oil (patronize our advertisers) *LINK* | 10/26/2003, 7:56 pm |
| semi OT metal bender | 10/26/2003, 7:27 pm |
| hgtv | 10/26/2003, 6:15 pm |
| New Auction Item | 10/26/2003, 5:47 pm |
| Second successful turned box *PIC* | 10/26/2003, 3:28 pm |
| IMPORTANT SURVEY | 10/26/2003, 3:01 pm |
| For Wally Dickerman | 10/26/2003, 2:56 pm |
| Buffing Wheel Speed ?? | 10/26/2003, 8:08 am |
| Lost My Sharpening Jig Plans | 10/25/2003, 11:01 pm |
| More Pens | 10/25/2003, 10:13 pm |
| New Machine | 10/25/2003, 9:12 pm |
| Please Vote - 2x4 contest PICS in Events Forum *NM* | 10/25/2003, 4:09 pm |
| CA Glue | 10/25/2003, 12:48 pm |
| getting a tiny bit better...whew. | 10/25/2003, 11:01 am |
| Model Airplanes and Woodturning?? | 10/25/2003, 1:12 am |
| Need packaging ideas | 10/24/2003, 11:10 pm |
| Been looking now talking | 10/24/2003, 9:52 pm |
| glue end grain | 10/24/2003, 9:46 pm |
| oneway chuck questions | 10/24/2003, 3:19 pm |
| Mark your calendars... | 10/24/2003, 3:06 pm |
| older Jet lathe | 10/24/2003, 2:42 pm |
| Ficus | 10/24/2003, 2:35 pm |
| Segmented Pen question | 10/24/2003, 1:55 pm |
| Jet 1442 motor is in the way? | 10/24/2003, 12:38 pm |
| Only two days *LINK* | 10/24/2003, 12:25 pm |
| The Order of Canada, Leonard Lee *LINK* | 10/24/2003, 8:36 am |
| WOOD OF THE WEEK - Bloodwood | 10/24/2003, 8:35 am |
| Newbie with green Cherry ???? | 10/23/2003, 9:35 pm |
| Oak bowl *PIC* | 10/23/2003, 5:53 pm |
| Wood identification site? | 10/23/2003, 4:50 pm |
| Black Acacia.... | 10/23/2003, 3:26 pm |
| New Pen Kit Review | 10/23/2003, 1:58 pm |
| thanks Mike Schwing from Maryland | 10/23/2003, 1:44 pm |
| Tonight's chat - finishing *NM* | 10/23/2003, 1:24 pm |
| MORE NEW SHOTS *LINK* | 10/23/2003, 12:48 pm |
| Segmented Turning Books? | 10/23/2003, 12:12 pm |
| Christmas Gift Ideas for Segmented Turner | 10/23/2003, 9:11 am |
| Question for Dominic on the Box Elder | 10/23/2003, 8:07 am |
| Fred L drop me an email | 10/23/2003, 7:25 am |
| New Look - Articles & Reviews Board | 10/23/2003, 1:20 am |
| Beal system questions | 10/22/2003, 11:56 pm |
| Oak Segmented burned bowl *PIC* | 10/22/2003, 11:37 pm |
| 1st Large Bowl Turning | 10/22/2003, 11:34 pm |
| Small Treasures | 10/22/2003, 11:29 pm |
| TDaniels....... | 10/22/2003, 9:41 pm |
| Art show | 10/22/2003, 9:29 pm |
| dust collection | 10/22/2003, 7:35 pm |
| grinds | 10/22/2003, 6:17 pm |
| No grind pix yet. Anybody interested? | 10/22/2003, 4:51 pm |
| World of Woodturners site... | 10/22/2003, 3:46 pm |
| KMS tools rave | 10/22/2003, 11:05 am |
| Pen Kits,, Woodturningz | 10/21/2003, 10:10 pm |
| Selling you works | 10/21/2003, 9:40 pm |
| suggested brand for tools? | 10/21/2003, 9:16 pm |
| Jet Mini problem | 10/21/2003, 7:31 pm |
| Fruit Bowl *PIC* | 10/21/2003, 6:52 pm |
| Turning Topic 10/22/03 Off the bed | 10/21/2003, 6:40 pm |
| Chatter tool *PIC* | 10/21/2003, 6:14 pm |
| wood stabilaziation | 10/21/2003, 3:48 pm |
| Sorby texture tool opinions? | 10/21/2003, 1:18 pm |
| Ultimate pen kit? | 10/21/2003, 12:25 pm |
| Beeswax | 10/21/2003, 11:31 am |
| Grind pictures wanted... *LINK* | 10/21/2003, 11:15 am |
| 2x4 Contest Info and a rant | 10/21/2003, 8:41 am |
| The 3 Yr. old post by Basil, about the Oneway.. | 10/21/2003, 2:24 am |
| Hey Brad Vietje | 10/20/2003, 9:41 pm |
| Turning Tool Tip of the Week | 10/20/2003, 8:33 pm |
| JET Mini Lathes | 10/20/2003, 7:05 pm |
| Duck Calls | 10/20/2003, 3:05 pm |
| Collaborative Piece *PIC* | 10/20/2003, 1:56 pm |
| Sioux vs Milwaukee? | 10/20/2003, 12:55 pm |
| This is a 3 year old post. | 10/20/2003, 11:41 am |
| Re: I want a Oneway lathe...... | 10/20/2003, 10:44 am |
| 2x4 Contest Deadline Today | 10/20/2003, 10:27 am |
| Dyeing Veneer | 10/20/2003, 10:16 am |
| Re: I want a Oneway lathe...... | 10/20/2003, 9:38 am |
| Re: I want a Oneway lathe...... | 10/20/2003, 9:04 am |
| NEW SHOP SHOTS *LINK* | 10/20/2003, 7:58 am |
| Re: I want a Oneway lathe...... | 10/19/2003, 11:19 pm |
| You don't NEED a Oneway!! | 10/19/2003, 11:05 pm |
| Re: I want a Oneway lathe...... | 10/19/2003, 9:57 pm |
| What happen to Woodturners Resource? | 10/19/2003, 9:17 pm |
| Grinding wheels | 10/19/2003, 8:23 pm |
| New Pen *PIC* | 10/19/2003, 7:00 pm |
| "vherry" opportunity, for you, northern Maryland | 10/19/2003, 4:33 pm |
| Carolina Cherry Burl...... | 10/19/2003, 2:43 pm |
| How to tell Tiger (Curly) Maple from the outside *PIC* | 10/19/2003, 2:33 pm |
| Sherline Lathe | 10/19/2003, 12:28 pm |
| For Steve Russell-Beall System | 10/19/2003, 12:05 pm |
| Backside of Lathe | 10/19/2003, 11:32 am |
| Thanks Barbara | 10/19/2003, 6:42 am |
| TDaniel, your grind.. | 10/19/2003, 12:39 am |
| Lacquer Users - Question | 10/18/2003, 10:58 pm |
| Day Late and a Dollar Short | 10/18/2003, 10:55 pm |
| Sightings picture | 10/18/2003, 9:53 pm |
| Loading bealle wheels | 10/18/2003, 1:46 pm |
| How to treat this oak burl? *PIC* | 10/18/2003, 8:48 am |
| A couple of bowls *PIC* | 10/18/2003, 8:33 am |
| Pen Kits???? | 10/17/2003, 10:00 pm |
| Think Twice about buying the Jet 1642 | 10/17/2003, 7:43 pm |
| Aren't Ya Glad ........ | 10/17/2003, 7:33 pm |
| Quick answer needed - Finishing | 10/17/2003, 6:17 pm |
| Fluting, etc | 10/17/2003, 5:24 pm |
| How dense is Bradford Pear? | 10/17/2003, 4:29 pm |
| 2 spur drive in a scroll chuck? | 10/17/2003, 12:58 pm |
| Price For Burl ? | 10/17/2003, 12:44 pm |
| Side Grind & Fingernail | 10/17/2003, 12:06 pm |
| Chatter Tool | 10/17/2003, 9:28 am |
| tonight's chat - finishing *NM* | 10/16/2003, 9:21 pm |
| Today is Boss' Day | 10/16/2003, 7:19 pm |
| Last night chatters *PIC* | 10/16/2003, 3:45 pm |
| Seeking Tips for Publication *LINK* | 10/16/2003, 3:20 pm |
| Bio | 10/16/2003, 12:57 pm |
| threads and tapers | 10/16/2003, 11:06 am |
| WOOD OF THE WEEK | 10/16/2003, 9:28 am |
| Great Chat last night | 10/16/2003, 8:39 am |
| Hitching up the wagon, heading to Dallas. | 10/16/2003, 3:05 am |
| grinder wheels | 10/16/2003, 12:20 am |
| Good and Bad in Everything.... | 10/15/2003, 9:44 pm |
| Lathe afficienados | 10/15/2003, 7:48 pm |
| How do I use Renissance Wax? | 10/15/2003, 3:44 pm |
| Bowl and Pens | 10/15/2003, 3:32 pm |
| Use for worn out bowl gouge? | 10/15/2003, 12:55 pm |
| What is a Juried Show? | 10/15/2003, 10:53 am |
| The Critique (A message from your Moderator) *LINK* | 10/15/2003, 10:46 am |
| Rumors about CA glue | 10/15/2003, 5:10 am |
| New Bowls from my Lathe | 10/14/2003, 11:56 pm |
| 1st impressions...JET Mini w/speed control *LINK* *PIC* | 10/14/2003, 11:03 pm |
| bandsaw tip | 10/14/2003, 8:43 pm |
| Woodworks 2003 Show | 10/14/2003, 3:26 pm |
| 2x4 Contest Update See Events Forum *NM* | 10/14/2003, 12:31 pm |
| NEW SHOP SHOT *LINK* | 10/14/2003, 9:59 am |
| Good Reference *LINK* | 10/14/2003, 9:48 am |
| assembled, burnt textured and painted bowl *PIC* | 10/13/2003, 10:45 pm |
| Turning Purpleheart | 10/13/2003, 9:21 pm |
| Lathe comparison | 10/13/2003, 8:19 pm |
| Cast iron legs for Nova | 10/13/2003, 6:37 pm |
| PENS | 10/13/2003, 11:01 am |
| Glossy Finish | 10/13/2003, 10:02 am |
| Wed night turning chat 10/15/03 | 10/13/2003, 9:58 am |
| Monday Tool Tip | 10/13/2003, 9:50 am |
| Confetti lamp blanks | 10/13/2003, 9:36 am |
| Mushroom farming | 10/13/2003, 8:18 am |
| Pen turning class in Indy | 10/12/2003, 8:18 pm |
| New Articles & Tips | 10/12/2003, 6:25 pm |
| Thanks Tom Sweeney & Welcome Stephen Stokes | 10/12/2003, 6:15 pm |
| Rude Osolnik show | 10/12/2003, 5:33 pm |
| Another Texture & Fire *PICS* | 10/12/2003, 5:07 pm |
| Thanks | 10/12/2003, 3:07 pm |
| Pin Chuck | 10/12/2003, 11:06 am |
| Turning green *PIC* | 10/11/2003, 11:39 pm |
| Buffing lacquer? | 10/11/2003, 10:08 pm |
| The Promised Land... | 10/11/2003, 8:30 pm |
| Proof *PIC* | 10/11/2003, 8:25 pm |
| Vega Bowl lathe *LINK* | 10/11/2003, 7:54 pm |
| Dave Peebles | 10/11/2003, 10:58 am |
| tURNING sYMPOSIUM *LINK* | 10/11/2003, 10:53 am |
| wider grinder wheels | 10/10/2003, 10:01 pm |
| Oil Can, home-brew container report | 10/10/2003, 8:05 pm |
| Platter thickness help | 10/10/2003, 4:58 pm |
| Turning Miniatures | 10/10/2003, 3:19 pm |
| Dry Blanks Wanted | 10/10/2003, 1:17 pm |
| Budget Hourly Rate or How to Price Your Work | 10/10/2003, 1:04 pm |
| Happy Birthday Dominic Greco!! *NM* | 10/10/2003, 11:30 am |
| Purpleheart and UV protection | 10/10/2003, 11:05 am |
| Terry... | 10/10/2003, 10:19 am |
| Turning Tip of the Week | 10/10/2003, 10:09 am |
| Enco Live Center & Promo Code *PIC* | 10/10/2003, 9:12 am |
| Re: pure tung oil finish | 10/10/2003, 7:56 am |
| What would you do? | 10/9/2003, 10:23 pm |
| Steve Loar's article | 10/9/2003, 10:10 pm |
| Neat Site *LINK* | 10/9/2003, 9:46 pm |
| Grind Angles | 10/9/2003, 8:53 pm |
| Back to the Grinder Stone.... | 10/9/2003, 7:58 pm |
| new local AAW chapter in N.C. | 10/9/2003, 7:53 pm |
| Shellac *LINK* | 10/9/2003, 7:37 pm |
| Tonight's chat - finishing *NM* | 10/9/2003, 6:17 pm |
| Co-signment Agreement/Prices? | 10/9/2003, 5:59 pm |
| Need Newel post advice | 10/9/2003, 5:00 pm |
| Live Centers | 10/9/2003, 1:50 pm |
| CA Accelerator & Color Bleedover | 10/9/2003, 12:27 pm |
| Trivia Board | 10/9/2003, 11:28 am |
| WANTED - woodturning books | 10/9/2003, 11:10 am |
| Steve Loar | 10/9/2003, 10:00 am |
| WOOD OF THE WEEK - Ebony | 10/9/2003, 9:01 am |
| A correction to chat comment | 10/9/2003, 7:48 am |
| miniature hollowing tools *PIC* | 10/8/2003, 7:24 pm |
| "bowed" Bowl Gouge | 10/8/2003, 5:15 pm |
| Source for 10" grinding wheels | 10/8/2003, 4:58 pm |
| Delta Lathe | 10/8/2003, 4:18 pm |
| Lathe Placement | 10/8/2003, 4:11 pm |
| TIP OF THE WEEK: Filling voids and cracks | 10/8/2003, 3:46 pm |
| John Lucas - Drill Rod turning tools | 10/8/2003, 3:42 pm |
| A gloat and a dilemma Long | 10/8/2003, 3:27 pm |
| Hey Ellis, small problem... | 10/8/2003, 2:43 pm |
| Tonight's topic Selling your work | 10/8/2003, 1:19 pm |
| 2x4 Contest Reminder | 10/8/2003, 9:56 am |
| New Lathe | 10/8/2003, 7:15 am |
| Noah, this mushroom is for you. | 10/8/2003, 2:28 am |
| Tealite Candles | 10/8/2003, 12:38 am |
| Finish for Cocabola | 10/8/2003, 12:22 am |
| Satin to Gloss, continued *PIC* | 10/7/2003, 9:10 pm |
| Finally turned something that didn't explode! | 10/7/2003, 9:08 pm |
| Delta 46-701 for sale | 10/7/2003, 6:12 pm |
| Spalting Question | 10/7/2003, 4:38 pm |
| new potpourri bowls *PIC* | 10/7/2003, 1:41 pm |
| Oneway handle? | 10/7/2003, 1:39 pm |
| Conover Lathe Used Price? | 10/7/2003, 11:14 am |
| New Segmented Vase | 10/7/2003, 10:59 am |
| A video is worth a thousand words | 10/7/2003, 10:46 am |
| Re: Powermatic Lathe | 10/7/2003, 8:45 am |
| Pen Display | 10/7/2003, 2:13 am |
| Stop Me!, pics | 10/6/2003, 10:32 pm |
| Tagua nut ornament *PIC* | 10/6/2003, 8:32 pm |
| Anybody want a free chuck of cherry? *PIC* | 10/6/2003, 6:56 pm |
| woodturningz *LINK* | 10/6/2003, 6:34 pm |
| Hollowing with Laser | 10/6/2003, 5:51 pm |
| Sorby sharpening ? | 10/6/2003, 12:28 pm |
| Termites and other bugs etc. ? | 10/6/2003, 11:43 am |
| WoodWorks '03 - St. Paul, MN | 10/6/2003, 11:31 am |
| NEW SHOP SHOTS *LINK* | 10/6/2003, 7:42 am |
| All roads lead to Woodcentral | 10/5/2003, 8:57 pm |
| Treating White Oak Burl | 10/5/2003, 8:53 pm |
| Satin to Gloss | 10/5/2003, 6:42 pm |
| UFO potpourri bowl | 10/5/2003, 5:27 pm |
| Texture & Fire with PICS | 10/5/2003, 12:30 pm |
| hollow turning tools | 10/4/2003, 11:17 pm |
| Andi Wolfe Demo | 10/4/2003, 10:39 pm |
| End Grain | 10/4/2003, 9:57 pm |
| firewood *PIC* | 10/4/2003, 6:50 pm |
| Top photo *PIC* | 10/4/2003, 6:18 pm |
| Top *PIC* | 10/4/2003, 5:48 pm |
| Best Finish For Ash ? | 10/4/2003, 2:23 pm |
| Nuked Bowl Help * 3 Pics* | 10/4/2003, 12:00 pm |
| Why no navigation column | 10/4/2003, 11:23 am |
| Scorching wood Techniques | 10/4/2003, 11:16 am |
| Great Pen Blanks from Ebay | 10/3/2003, 2:20 pm |
| bowl turning demo | 10/3/2003, 1:30 pm |
| LDD Experience *LINK* | 10/3/2003, 9:07 am |
| John Jordan | 10/3/2003, 8:46 am |
| Pen Finish Problems | 10/3/2003, 7:36 am |
| Q: for Tormek (and other I suppose) sharpeners | 10/3/2003, 7:25 am |
| Dominic Greco - Help | 10/3/2003, 6:39 am |
| Richard Raffan post on main forum | 10/3/2003, 12:33 am |
| Cleaning up inside of pine hollow vessels | 10/3/2003, 12:33 am |
| Red Cedar Expertise Needed | 10/2/2003, 7:49 pm |
| Re: PM 45 Lathe, great machine | 10/2/2003, 4:41 pm |
| Last Night's Chatroom | 10/2/2003, 2:54 pm |
| Lookin' for a book | 10/2/2003, 1:10 pm |
| Good price on Jet Mini | 10/2/2003, 11:37 am |
| Business software (slightly off topic) | 10/2/2003, 10:34 am |
| Difficulities turning balusters | 10/2/2003, 10:31 am |
| Bocote | 10/2/2003, 6:36 am |
| Prices on Union Graduate | 10/1/2003, 11:20 pm |
| Turning Transport | 10/1/2003, 7:51 pm |
| English Walnut Graft *PIC* | 10/1/2003, 6:04 pm |
| Finishing rough side of nat. edge burl | 10/1/2003, 4:19 pm |
| Jordan Hollowers review (long) | 10/1/2003, 3:47 pm |
| Rocky Mountain Turning Symposium | 10/1/2003, 3:17 pm |
| Wisteria *PIC* | 10/1/2003, 2:37 pm |
| ornaments *PIC* | 10/1/2003, 2:15 pm |
| Chopsaw for segments? | 10/1/2003, 12:57 pm |
| Ponderosa Pine Revisited *PIC* | 10/1/2003, 12:54 pm |
| MORE SHOP SHOTS *LINK* | 10/1/2003, 11:05 am |
| Ambrosia Maple bowl-Segmented *PIC* | 10/1/2003, 9:52 am |
| Tonight's Topic | 10/1/2003, 9:03 am |
| Why Didn't I think of That? | 10/1/2003, 8:34 am |
| WOOD OF THE WEEK | 10/1/2003, 8:21 am |
| Today is OCT 1st | 10/1/2003, 6:24 am |
| Embedding pictures | 9/30/2003, 11:11 pm |
| faceplate | 9/30/2003, 8:32 pm |
| Calling Dominic Greco | 9/30/2003, 8:30 pm |
| new Jet VS mini | 9/30/2003, 4:51 pm |
| Preserving Spalted Maple | 9/30/2003, 2:43 pm |
| Web Site Hosting | 9/30/2003, 12:21 pm |
| Tool handle design | 9/30/2003, 12:20 pm |
| Turning Topic 9/31/03 Upper end lathes | 9/30/2003, 8:52 am |
| Big walnut and maple salad bowl | 9/30/2003, 8:49 am |
| Yet another thread on design and limits | 9/29/2003, 9:10 pm |
| Apple Wood | 9/29/2003, 8:22 pm |
| What do YOU think? *PIC* | 9/29/2003, 2:48 pm |
| NEW SHOP SHOTS *LINK* | 9/29/2003, 8:37 am |
| Moving a 700# Gorilla | 9/28/2003, 10:05 pm |
| more self-imposed limits | 9/28/2003, 9:45 pm |
| Shop smith as a lathe | 9/28/2003, 4:30 pm |
| Said "bye bye" to my first lathe | 9/27/2003, 10:19 pm |
| Steve Loar's article | 9/27/2003, 9:43 pm |
| Pen Turning supplies | 9/27/2003, 4:57 pm |
| New material...Fibermascus *LINK* *PIC* | 9/27/2003, 4:15 pm |
| Self imposed limits? | 9/27/2003, 11:08 am |
| New tool rest *PIC* | 9/26/2003, 11:33 pm |
| Found some wood | 9/26/2003, 10:12 pm |
| "Baby" gloat | 9/26/2003, 10:07 pm |
| Isabel!@#%&* | 9/26/2003, 10:03 pm |
| Auctions & Donations {Long} | 9/26/2003, 8:54 pm |
| Another take on Dual Action sander/close drill | 9/26/2003, 3:20 pm |
| Ed Mouthroup Passes | 9/26/2003, 3:07 pm |
| Ellsworth to speak at Chicago SOFA | 9/26/2003, 11:27 am |
| Jet Mini Lathe | 9/26/2003, 11:19 am |
| Multiple Personality Pen | 9/26/2003, 11:18 am |
| Tool/Tip/Wood of the week? | 9/26/2003, 11:10 am |
| Still wrestling with CA pen finish | 9/26/2003, 6:59 am |
| Wed night Turning chat | 9/26/2003, 6:23 am |
| Cutting slabs | 9/26/2003, 6:19 am |
| Washington DC Area | 9/26/2003, 6:16 am |
| Very Nice Wood Art Show in Indy *LINK* | 9/25/2003, 10:23 pm |
| I guess I should keep this huh? | 9/25/2003, 9:41 pm |
| Would your club be interested? | 9/25/2003, 9:24 pm |
| Tonight's chat - finishing *NM* | 9/25/2003, 9:00 pm |
| Burl Q | 9/25/2003, 2:29 pm |
| Dual Action air sander or close quarters drill? | 9/25/2003, 9:57 am |
| Ed Moulthrop | 9/25/2003, 8:46 am |
| Hackberry | 9/25/2003, 8:21 am |
| Well, shucks! | 9/25/2003, 8:16 am |
| John Lucas | 9/25/2003, 7:05 am |
| Tung Oil finish on Cocobolo | 9/24/2003, 11:34 pm |
| I just want to add my two cents | 9/24/2003, 1:50 pm |
| Turning Thin | 9/24/2003, 12:19 pm |
| Shapes | 9/24/2003, 11:18 am |
| Tonight's Turning Topic 9/24 | 9/24/2003, 8:46 am |
| My first shrooms :) | 9/24/2003, 7:51 am |
| Parts Service from General... | 9/24/2003, 1:34 am |
| Thick or Thin ? *PIC* | 9/23/2003, 10:52 pm |
| vacuum chuck! | 9/23/2003, 10:42 pm |
| Nothing to do till tomorrow | 9/23/2003, 10:28 pm |
| glue mixture | 9/23/2003, 8:48 pm |
| Help with chainsaw problem | 9/23/2003, 7:40 pm |
| TD...want some wood? | 9/23/2003, 6:35 pm |
| Mushrooms *PIC* | 9/23/2003, 6:33 pm |
| nother Design Question: Undercut Rims *PIC* | 9/23/2003, 5:46 pm |
| Dollar devaluation | 9/23/2003, 4:58 pm |
| Speaking of design.. *LINK* | 9/23/2003, 4:13 pm |
| Customer Service | 9/23/2003, 4:09 pm |
| Faceplate problem | 9/23/2003, 2:44 pm |
| Turning willow | 9/23/2003, 11:18 am |
| Motor Question of the DC persuasion. | 9/23/2003, 10:17 am |
| Thick or thin? | 9/23/2003, 9:17 am |
| Advance warning! (newbie) | 9/23/2003, 8:35 am |
| Mushrooms | 9/23/2003, 7:54 am |
| Whew! | 9/23/2003, 7:41 am |
| Design Question | 9/22/2003, 11:35 pm |
| Oil finish Question | 9/22/2003, 3:45 pm |
| Anchorseal okay for outdoor storage? | 9/22/2003, 2:15 pm |
| Keeping the bark from falling off *PIC* | 9/22/2003, 11:43 am |
| Old Turner's tales | 9/22/2003, 11:36 am |
| Barb and Kim discussion | 9/22/2003, 10:23 am |
| Has anyone ever turn Hickory? | 9/22/2003, 8:41 am |
| Trapping Plane *PIC* | 9/21/2003, 9:23 pm |
| Newbie Turning Tools | 9/21/2003, 3:20 pm |
| Sand Paper | 9/21/2003, 8:44 am |
| Choosing a new lathe | 9/21/2003, 1:03 am |
| chucks | 9/20/2003, 10:20 pm |
| What chainsaw? | 9/20/2003, 10:07 pm |
| English Walnut and a storage question | 9/20/2003, 8:32 pm |
| Topic for 9/24/03 | 9/20/2003, 8:34 am |
| A Record!!! 105 messages in the last 24 hours | 9/19/2003, 11:28 pm |
| My Head Hurts!! | 9/19/2003, 4:19 pm |
| Bradford Pear | 9/19/2003, 3:18 pm |
| Sorby 3/4 gouge -sears sale *LINK* | 9/19/2003, 11:35 am |
| Chain Saw Question?? | 9/19/2003, 11:31 am |
| Wednesday Night Chats ... | 9/19/2003, 11:01 am |
| Mini Lathe Chuck ? | 9/19/2003, 10:32 am |
| Birthday tools | 9/19/2003, 9:50 am |
| Hurricane Gloats | 9/19/2003, 8:16 am |
| Metal Spinning | 9/18/2003, 11:10 pm |
| carved weedpot *PIC* | 9/18/2003, 10:00 pm |
| Found angle drill for sanding cheap *LINK* | 9/18/2003, 9:26 pm |
| Ponderosa Pine *PIC* | 9/18/2003, 9:23 pm |
| Drying Bowls *PIC* | 9/18/2003, 5:22 pm |
| worm hole bondo | 9/18/2003, 4:57 pm |
| Tonight's chat - finishing - 8.30 est | 9/18/2003, 1:31 pm |
| Next week's topic? | 9/18/2003, 8:10 am |
| Tim Skilton pads *LINK* | 9/17/2003, 11:41 pm |
| E-Z Vacuum System | 9/17/2003, 8:40 pm |
| turning a stamp holder | 9/17/2003, 7:58 pm |
| thanks for asking *LINK* | 9/17/2003, 6:35 pm |
| a new weedpot *PIC* | 9/17/2003, 6:18 pm |
| Vicmarc vacuum chuck | 9/17/2003, 6:11 pm |
| economy chuck *LINK* | 9/17/2003, 5:21 pm |
| Ouch - I missed my chance *LINK* | 9/17/2003, 4:08 pm |
| Finish type q, and the first profit... | 9/17/2003, 3:14 pm |
| segmented turning software | 9/17/2003, 1:39 pm |
| KISS Toolrest Revisited | 9/17/2003, 1:03 pm |
| Topic for 9/17/03 Sanding/scraping | 9/17/2003, 11:47 am |
| PM 3520A chuck lock-up | 9/17/2003, 9:43 am |
| Y'all gonna let me... | 9/17/2003, 9:39 am |
| Goblet Finish | 9/17/2003, 9:11 am |
| Finishing another's work. *PIC* | 9/17/2003, 8:26 am |
| newbie question - purpleheart | 9/17/2003, 7:42 am |
| Spalted Maple finish?? | 9/16/2003, 11:52 pm |
| A little brag *PIC* | 9/16/2003, 5:26 pm |
| Arbotech help | 9/16/2003, 5:08 pm |
| Collecting Wood | 9/16/2003, 3:28 pm |
| Cocobolo Finish | 9/16/2003, 11:33 am |
| What to Write? | 9/16/2003, 10:55 am |
| Log Lifter | 9/16/2003, 10:46 am |
| Need Some More Help at WOODWORKS! | 9/15/2003, 11:39 pm |
| End boring jig for lathe? | 9/15/2003, 11:08 pm |
| Why Not? | 9/15/2003, 10:40 pm |
| sharping | 9/15/2003, 10:20 pm |
| What Other Turning Forums? | 9/15/2003, 7:10 pm |
| Look here folks... | 9/15/2003, 5:07 pm |
| Walnut and Hickory Bowl *PIC* | 9/15/2003, 1:00 pm |
| Pith turned Box Elder bowls | 9/15/2003, 12:44 pm |
| New Shop Shots Up *LINK* | 9/15/2003, 7:39 am |
| Catches | 9/15/2003, 12:45 am |
| Large Wisteria *PIC* | 9/14/2003, 8:30 pm |
| And a gloat... | 9/14/2003, 6:07 pm |
| A PSA for new Lathe owners... | 9/14/2003, 5:56 pm |
| The first fully segmented *PIC* | 9/14/2003, 5:48 pm |
| Lathe to Buy ??? | 9/14/2003, 1:17 pm |
| New item on the Benefit Auctions page *NM* | 9/14/2003, 1:51 am |
| Bowl with a story *PIC* | 9/13/2003, 6:14 pm |
| Yorkcraft or ........ | 9/13/2003, 5:24 pm |
| Lathe chuck | 9/13/2003, 5:19 pm |
| Copper beech or copper birch? | 9/13/2003, 5:11 pm |
| Sanding the bottom... *LINK* *PIC* | 9/13/2003, 5:11 pm |
| Possible problem with Supernova chuck | 9/13/2003, 4:45 pm |
| Balusters on a short bed lathe | 9/13/2003, 9:19 am |
| Why do you go to Symposiums? | 9/13/2003, 12:13 am |
| About bandsaws... | 9/12/2003, 11:59 pm |
| A question: | 9/12/2003, 10:15 pm |
| Lessons | 9/12/2003, 9:45 pm |
| Finished first hollow bowl *PIC* | 9/12/2003, 6:09 pm |
| Bandsaw choice | 9/12/2003, 1:50 pm |
| First Segmented "kind of" *PIC* | 9/12/2003, 12:15 pm |
| Delta midi lathe | 9/12/2003, 12:57 am |
| This weekend at Unicoi | 9/11/2003, 11:08 pm |
| central machinery lathe from Harbor Freight | 9/11/2003, 9:09 pm |
| Mark Kauder question? | 9/11/2003, 8:22 pm |
| Variable speed lathe | 9/11/2003, 8:19 pm |
| Bowl gouge on Benefit Auction page | 9/11/2003, 3:48 pm |
| Bowl Steady | 9/11/2003, 2:28 pm |
| Petter Herud | 9/11/2003, 2:23 pm |
| Tonight's chat is on finishing | 9/11/2003, 1:17 pm |
| Suggestion for chat room photos | 9/11/2003, 10:14 am |
| Extending the life on Micro Mesh? | 9/11/2003, 9:18 am |
| Turning Sightings | 9/11/2003, 8:49 am |
| Gold leaf platter *PIC* | 9/11/2003, 7:39 am |
| Terry Pic #2 *NM* *PIC* | 9/10/2003, 9:35 pm |
| Terry Pic #1 *NM* *PIC* | 9/10/2003, 9:34 pm |
| Carrot mirror | 9/10/2003, 9:23 pm |
| Yippee! Yahoo! | 9/10/2003, 8:47 pm |
| It's big....it's green | 9/10/2003, 8:33 pm |
| Tall vessel for CHAT tonight *PIC* | 9/10/2003, 6:39 pm |
| Wolverine grinding jig | 9/10/2003, 5:07 pm |
| Turning Chat 9/10/03 Tall vases | 9/10/2003, 4:23 pm |
| Turning Southern Style This Weekend | 9/10/2003, 4:10 pm |
| Urn *PIC* | 9/10/2003, 4:04 pm |
| Tall Bloodwood for Chat *PIC* | 9/10/2003, 3:58 pm |
| Nova Cole Jaws help | 9/10/2003, 2:49 pm |
| Riser block ques on Reliant | 9/10/2003, 2:45 pm |
| Tall Maple Vessel *PIC* | 9/10/2003, 2:13 pm |
| Tall Maple Bowl *PIC* | 9/10/2003, 2:11 pm |
| Beaded Madrone Vessel *PIC* | 9/10/2003, 2:04 pm |
| CA Glue Question | 9/10/2003, 12:27 pm |
| TD - Subject for Chat Tonight? | 9/10/2003, 10:37 am |
| New Segmented Bowls | 9/10/2003, 10:35 am |
| Nova 3000 Help | 9/9/2003, 10:42 pm |
| First Cartridge Pen | 9/9/2003, 10:07 pm |
| Hey John Lucas! | 9/9/2003, 8:30 pm |
| M2 vs A2 HSS? | 9/9/2003, 3:32 pm |
| 2x4 CONTEST RULES. Please check events forum *NM* | 9/9/2003, 10:56 am |
| Wausau, Wisconsin | 9/9/2003, 8:08 am |
| ball bats | 9/8/2003, 10:55 pm |
| Indianapolis bound. | 9/8/2003, 10:42 pm |
| VL100 motor question | 9/8/2003, 10:37 pm |
| Pro Live Center | 9/8/2003, 10:20 pm |
| wood score from god | 9/8/2003, 9:58 pm |
| Scoop Q... | 9/8/2003, 9:28 pm |
| "Ellsworth" grind | 9/8/2003, 3:13 pm |
| Cottonwood Candy Dish *PIC* *PIC* | 9/8/2003, 3:08 pm |
| 1st hollow form *PIC* | 9/8/2003, 1:37 pm |
| Tops | 9/8/2003, 1:20 pm |
| need to learn the skew | 9/8/2003, 11:48 am |
| 2x4 contest update. Input needed | 9/8/2003, 9:01 am |
| General Lathes | 9/7/2003, 11:04 pm |
| Yikes! It that a TREE? *PIC* | 9/7/2003, 10:15 pm |
| Acceptable lathe run-out? | 9/7/2003, 8:26 pm |
| Beale buffing system alternative | 9/7/2003, 5:34 pm |
| Calling Bill Grumbine *LINK* | 9/7/2003, 5:26 pm |
| Goblet Stems | 9/7/2003, 11:37 am |
| Bandsaw blade for cutting bowl blanks. | 9/7/2003, 7:55 am |
| My method for Turned Boxes | 9/6/2003, 9:46 pm |
| Cool Old Lathe PIC | 9/6/2003, 9:31 pm |
| Hollowing with the Pith/LDD? | 9/6/2003, 8:39 pm |
| honing disc | 9/6/2003, 7:31 pm |
| powermatic 4224 | 9/6/2003, 9:37 am |
| Leveling the Bottom of A Bowl | 9/6/2003, 7:34 am |
| 10 New Tips Published | 9/6/2003, 1:48 am |
| green wood | 9/5/2003, 9:22 pm |
| New Grinder Setup | 9/5/2003, 9:19 pm |
| Delta lathe | 9/5/2003, 7:16 pm |
| Cutting Bowl Blanks On a Bandsaw | 9/5/2003, 4:56 pm |
| 2x4 Contest Poll. Please read | 9/5/2003, 2:04 pm |
| Larry Hancock's Site.... | 9/5/2003, 12:27 pm |
| AAW Survey *LINK* | 9/5/2003, 10:58 am |
| cutting geometry *LINK* | 9/5/2003, 9:42 am |
| Mark, thanks for the great article. | 9/5/2003, 9:05 am |
| In my wildest dreams.... | 9/5/2003, 12:05 am |
| New Article for Turners | 9/4/2003, 11:57 pm |
| S.W.A.T. -TTT | 9/4/2003, 10:26 pm |
| Cumberland, MD | 9/4/2003, 9:49 pm |
| Tell me about Granberg mills... *NM* | 9/4/2003, 8:18 pm |
| 3/4" or 1" oval skew ? | 9/4/2003, 6:44 pm |
| What Does 9-3-03-1A : $275 Mean? Turning Stock ? *NM* | 9/4/2003, 6:34 pm |
| Lessons?? | 9/4/2003, 6:26 pm |
| Hey Wally Dickerman! | 9/4/2003, 3:15 pm |
| Turning Newbie Questions | 9/4/2003, 12:43 pm |
| Thanks, Pete | 9/3/2003, 9:01 pm |
| Can you buy the wood for this price? *LINK* | 9/3/2003, 8:47 pm |
| weather at chattime | 9/3/2003, 8:32 pm |
| new cherry bowl *PIC* | 9/3/2003, 7:10 pm |
| new turnings *PIC* | 9/3/2003, 7:05 pm |
| Russ Fairfield... | 9/3/2003, 4:52 pm |
| Boxes for Ornaments? | 9/3/2003, 4:10 pm |
| Turning Topic for 9/3/03 *LINK* | 9/3/2003, 12:31 pm |
| Punky Spalted Maple Help! | 9/3/2003, 11:22 am |
| Yellowheart Urn *PIC* | 9/3/2003, 11:07 am |
| What is tonights topic for the chat?"NM" *NM* | 9/3/2003, 9:56 am |
| Confetti Lights | 9/3/2003, 9:31 am |
| Opinions Wanted - Artist Co-op | 9/3/2003, 8:59 am |
| Grizzly or Jet Lathe? | 9/2/2003, 4:28 pm |
| Finally, Luck with apple! | 9/2/2003, 11:07 am |
| Vicmark VL300 vs. Powermatic | 9/1/2003, 10:39 pm |
| Turning Boxes, pics | 9/1/2003, 8:23 pm |
| Beal System - Lathe or Regular System? | 9/1/2003, 2:49 pm |
| newbie??? | 9/1/2003, 12:31 pm |
| Updated web site *LINK* | 9/1/2003, 12:23 pm |
| Lacquer in spray cans | 9/1/2003, 10:31 am |
| Box Elder SCORE! *PIC* | 8/31/2003, 11:12 pm |
| Unexpected rot inside a bowl blank *PIC* | 8/31/2003, 8:28 pm |
| Interior rot in a bowl blank | 8/31/2003, 8:24 pm |
| Texas Turn or Two (SWAT) | 8/31/2003, 8:06 pm |
| 2 New Articles & 2 New Tips | 8/31/2003, 4:45 pm |
| Finish for ornaments | 8/31/2003, 2:56 pm |
| Speaking of Large Segmented Turnings.... *PIC* | 8/31/2003, 11:41 am |
| Deep hollowforms | 8/31/2003, 9:21 am |
| segmented turning | 8/31/2003, 7:44 am |
| Large Segmented Turnings-pics | 8/31/2003, 12:46 am |
| ebonizing | 8/30/2003, 9:27 pm |
| segmented bowl blank PIC *PIC* | 8/30/2003, 3:54 pm |
| Sanding sealer | 8/30/2003, 11:16 am |
| Jam chuck anyone? Pic | 8/30/2003, 9:40 am |
| Tung Oil | 8/30/2003, 9:03 am |
| VS Delta Grinder? | 8/29/2003, 9:45 pm |
| Lathe Advice | 8/29/2003, 4:03 pm |
| sanding sealer Q's | 8/29/2003, 3:47 pm |
| Wood Suggestions | 8/29/2003, 3:12 pm |
| Ash? | 8/29/2003, 1:51 pm |
| Ques on Christmas ornaments | 8/28/2003, 7:45 pm |
| THE TERROR HAS LESSONED....THE SKEW | 8/28/2003, 7:08 pm |
| Turning Chat, What are your thoughts? | 8/28/2003, 6:19 pm |
| Lathe advice | 8/28/2003, 3:17 pm |
| Face clip art needed | 8/28/2003, 12:42 pm |
| Big Maple Salad Bowl | 8/28/2003, 11:14 am |
| A Positive Slew of New Articles & TIps | 8/27/2003, 11:14 pm |
| Tonight's turning topic 8/27 | 8/27/2003, 7:08 pm |
| Tool Post Screws for General Lathe?? | 8/27/2003, 4:30 pm |
| Red streaks in Box Elder trees? | 8/27/2003, 4:04 pm |
| Some of this last Month's Turning | 8/27/2003, 2:56 pm |
| What is tonight's topic?? *NM* | 8/27/2003, 10:48 am |
| Who wears gloves while turning? | 8/27/2003, 10:25 am |
| Milwaukee vs. Sioux | 8/27/2003, 9:17 am |
| A New Article for Turners | 8/27/2003, 12:04 am |
| Xmas Oranament size | 8/26/2003, 5:45 pm |
| Pommels, Beads, and Buns | 8/26/2003, 4:20 pm |
| Microwaving bowls...How? | 8/26/2003, 3:23 pm |
| Spiral Turning | 8/26/2003, 2:22 pm |
| Anyone turn Persimmon? | 8/26/2003, 1:57 pm |
| How the heck do you guy stand it? | 8/26/2003, 11:23 am |
| Cottonwood Bowl *PIC* | 8/25/2003, 9:47 pm |
| How do you display PENS at craft shows? | 8/25/2003, 9:42 pm |
| Xmas Oranaments fit | 8/25/2003, 7:55 pm |
| How do you display turnings at craft shows? | 8/25/2003, 5:47 pm |
| Buffing A Deep Bowl | 8/25/2003, 12:35 pm |
| New Woodturning Magazine | 8/25/2003, 10:01 am |
| Mesquite Peppermill *PIC* *PIC* | 8/25/2003, 9:41 am |
| M-2 Tool steel at Mc Master Carr | 8/25/2003, 8:15 am |
| Lacewood | 8/25/2003, 7:44 am |
| Face plates for new turner | 8/25/2003, 1:13 am |
| Some Turnings (3 pics) | 8/24/2003, 12:08 pm |
| New turning shop | 8/24/2003, 9:50 am |
| Bowl-blank sawmill *PIC* | 8/23/2003, 9:38 pm |
| PEN DISPLAY CASE | 8/23/2003, 4:27 pm |
| faceplate turning | 8/23/2003, 3:46 pm |
| Wormy Bowl | 8/23/2003, 9:02 am |
| question for john williams | 8/23/2003, 1:34 am |
| Rolling a bead next to a square pommel *PIC* | 8/22/2003, 9:26 pm |
| i need pattern help | 8/22/2003, 8:02 pm |
| cup center recommendation | 8/22/2003, 6:49 pm |
| Making tool rests | 8/22/2003, 4:41 pm |
| letter drill bits | 8/22/2003, 4:33 pm |
| Virginia Beach, VA | 8/22/2003, 4:06 pm |
| evaluating lathe tool steel? | 8/22/2003, 3:00 pm |
| turning materials | 8/22/2003, 12:36 pm |
| Hollowing boxes | 8/22/2003, 10:52 am |
| Blackwood - Drying and Gluing | 8/22/2003, 10:49 am |
| Bowl Question | 8/22/2003, 8:30 am |
| Souix drill bearing replacement | 8/22/2003, 6:38 am |
| Mounting heavy items on the lathe... | 8/22/2003, 12:07 am |
| Redwood bowl??? | 8/21/2003, 10:20 pm |
| longworth chuck | 8/21/2003, 10:11 pm |
| Jet 1236 Outboard Turning | 8/21/2003, 8:23 pm |
| building a lathe | 8/21/2003, 6:51 pm |
| Game Calls | 8/21/2003, 6:42 pm |
| Adding Weight to a DVR3000 Stand | 8/21/2003, 6:39 pm |
| Turning Bug Bitting | 8/21/2003, 2:25 pm |
| Woodtek lathe *LINK* | 8/21/2003, 1:14 pm |
| Bending M2 Steel | 8/21/2003, 1:09 pm |
| Best lathe - $500 - $800 range? | 8/21/2003, 12:04 pm |
| Anyone need directions to the BBQ? | 8/21/2003, 10:20 am |
| my bad dont open the following | 8/21/2003, 9:49 am |
| Morse taper | 8/21/2003, 9:09 am |
| Lathe Spindle Question? | 8/21/2003, 12:07 am |
| LONGWORTH CHUCK | 8/20/2003, 11:42 pm |
| Gary Hern *PIC* | 8/20/2003, 11:20 pm |
| Sanding sponge *PIC* | 8/20/2003, 10:57 pm |
| grizzly chuck | 8/20/2003, 6:01 pm |
| Burl free to good home. | 8/20/2003, 5:21 pm |
| Hey Bubba Bob! | 8/20/2003, 5:05 pm |
| Watco liquid finishing wax | 8/20/2003, 4:38 pm |
| Lidded Boxes | 8/20/2003, 3:18 pm |
| turning black locust | 8/20/2003, 2:30 pm |
| Vicmarc chuck praise | 8/20/2003, 10:31 am |
| VIRUS ALERT | 8/20/2003, 9:29 am |
| Tonight's turning chat...eliminating catches *PIC* | 8/20/2003, 8:55 am |
| Wolverine Vari-grind instructions | 8/19/2003, 11:03 pm |
| CA glue safety question? | 8/19/2003, 4:21 pm |
| Drop by and see us... | 8/19/2003, 11:02 am |
| Fifth Annual BBQ almost here! | 8/19/2003, 10:03 am |
| buying new tool :your opp. | 8/19/2003, 1:25 am |
| Saw Dust and Furnace/Water Heater | 8/19/2003, 12:54 am |
| 3520 powermatic | 8/19/2003, 12:02 am |
| Now for something completely different - PICS | 8/18/2003, 8:11 pm |
| Updated rant - w/a good ending: | 8/18/2003, 7:46 pm |
| New Jet Mini-lathes | 8/18/2003, 5:11 pm |
| Trend Airshield | 8/18/2003, 4:05 pm |
| Square scraper to a bowl scraper question | 8/18/2003, 1:49 pm |
| Calling Wally Dickerman | 8/18/2003, 1:32 pm |
| Turning chat for 8/20/03 Eliminating catches *PIC* | 8/18/2003, 10:11 am |
| Help-Craftsman 15" spindle replacement | 8/17/2003, 1:48 pm |
| Here's a well-illustrated article | 8/17/2003, 12:13 am |
| A Shop Update! *PIC* | 8/16/2003, 10:29 pm |
| A Shop Update! *PIC* | 8/16/2003, 10:26 pm |
| end grain tool | 8/16/2003, 7:42 pm |
| Sharpening turning gouges | 8/16/2003, 3:20 am |
| Adding a LED readout to Oneway Lathe | 8/15/2003, 11:58 am |
| Big baby is here | 8/14/2003, 9:35 pm |
| Record Lathe | 8/14/2003, 9:31 pm |
| Looking for an owner's manual. *PIC* | 8/14/2003, 9:25 pm |
| Free wood | 8/13/2003, 9:15 pm |
| WOW | 8/13/2003, 6:27 pm |
| pine 2x8 | 8/13/2003, 4:17 pm |
| Turning chat 8/13 no hang-ups! *LINK* | 8/13/2003, 3:47 pm |
| Chinaberry | 8/13/2003, 3:46 pm |
| Dominic's Pepper Mills... | 8/13/2003, 12:44 pm |
| What do you clean the lathe bed with? | 8/13/2003, 10:46 am |
| A bad evening | 8/12/2003, 11:18 pm |
| signing problem addition | 8/12/2003, 10:56 pm |
| Signing a bowl problem | 8/12/2003, 10:54 pm |
| Ooops Re 2 New Articles & 1 Review | 8/12/2003, 9:51 pm |
| Gum Eucalyptus-Long *PIC* | 8/12/2003, 9:30 pm |
| 10 inch Blue grinding wheel | 8/12/2003, 8:27 pm |
| Big orange gloat | 8/12/2003, 8:12 pm |
| 2 New Articles & 1 Review | 8/12/2003, 7:29 pm |
| vegas turning sites of interst | 8/12/2003, 7:15 pm |
| Looking for a supplier of Rustins coating | 8/12/2003, 5:14 pm |
| One more Pic *PIC* | 8/12/2003, 4:33 pm |
| Recent Turning *PIC* | 8/12/2003, 3:55 pm |
| Looking for my first lathe | 8/12/2003, 1:34 pm |
| CA Glue Hazard Warning | 8/12/2003, 11:11 am |
| Turning Supplies in Lost Angeles Area? | 8/12/2003, 10:56 am |
| Turned Spheres *PIC* | 8/12/2003, 7:38 am |
| ebony substitute | 8/11/2003, 9:23 pm |
| John Lucas, Russ Fairfield, and Keith Tompkins *PIC* | 8/11/2003, 2:58 pm |
| Sophie’s Fifth Annual BBQ Reminder!! | 8/11/2003, 12:17 pm |
| problem, bun feet | 8/11/2003, 8:24 am |
| Hooray for the new picture! *NM* | 8/11/2003, 3:36 am |
| 3520A Catch | 8/11/2003, 12:54 am |
| Mini/Midi with riser block? | 8/10/2003, 11:41 pm |
| lazer thickness tools | 8/10/2003, 10:39 pm |
| Logs to bowls | 8/10/2003, 9:54 pm |
| powder (particle) steel for tools | 8/10/2003, 8:03 pm |
| vicmarc chuck adaptor | 8/10/2003, 6:44 pm |
| Finding lathe speed | 8/10/2003, 3:49 pm |
| methods of work Q *PIC* | 8/10/2003, 3:03 pm |
| lathe speed | 8/10/2003, 1:34 pm |
| ebony vase *PIC* | 8/10/2003, 10:29 am |
| Finishing | 8/9/2003, 11:29 pm |
| Iso-Propyl Alcohol (isopropanal) | 8/9/2003, 10:18 pm |
| From gloat to bowl: *PIC* | 8/9/2003, 10:14 pm |
| ebony vase *PIC* | 8/9/2003, 8:44 pm |
| Posting pictures. | 8/9/2003, 5:37 pm |
| Turning boxes | 8/9/2003, 5:27 pm |
| pm3520 | 8/9/2003, 12:49 am |
| Hickory, Poplar, and Walnut? Possible gloat... | 8/8/2003, 9:41 pm |
| hazard using CA Glue & Transtint dye | 8/8/2003, 7:09 pm |
| 2nd cup chuck question | 8/8/2003, 5:38 pm |
| A segmented bowl question? | 8/8/2003, 11:01 am |
| Lathe upgrade recommendations | 8/8/2003, 7:28 am |
| linseed oil finish - submersion | 8/8/2003, 2:28 am |
| test message - please ignore | 8/8/2003, 2:20 am |
| Lathe upgrade. (Bit of a gloat) | 8/7/2003, 10:19 pm |
| Diamond Wheel Derssers | 8/7/2003, 9:26 pm |
| Another Cherry bowl *LINK* *PIC* | 8/7/2003, 7:30 pm |
| Longworth Chuck? | 8/7/2003, 5:36 pm |
| New strophe bowl *PIC* | 8/7/2003, 5:17 pm |
| Burl Gloat... *LINK* | 8/7/2003, 1:28 pm |
| Updated Rant, (with a good, postponed, ending). | 8/6/2003, 9:59 pm |
| Gadgets for Oneway live center | 8/6/2003, 3:06 pm |
| Spalted hackberry *PIC* | 8/6/2003, 2:10 pm |
| August's 'Showcase' posted on Creative Woodturning *LINK* | 8/6/2003, 1:31 pm |
| Chat tonight..CA adhesives.turning forum | 8/6/2003, 10:30 am |
| Mounting between centers question | 8/6/2003, 7:51 am |
| Hackberry & Ebony Vessel *PIC* | 8/5/2003, 9:09 pm |
| Cherry Bowl *LINK* | 8/5/2003, 8:02 pm |
| Woodworm Screw | 8/5/2003, 4:43 pm |
| Sorby Spiral / Texturing Tool | 8/5/2003, 3:37 pm |
| Incra jig or Jointech for segments | 8/5/2003, 10:13 am |
| Grinding wheels for bench grinders | 8/5/2003, 8:54 am |
| Has anyone turned melaleuca wood? | 8/5/2003, 1:26 am |
| pm3520 | 8/5/2003, 12:33 am |
| How to prep a bowl | 8/4/2003, 11:39 pm |
| homemade bowl lathe plan *PIC* | 8/4/2003, 9:44 pm |
| Stabilizing wood | 8/4/2003, 9:40 pm |
| Anyone know what this wood is? *PIC* | 8/4/2003, 7:42 pm |
| Shop/Studio floor | 8/4/2003, 7:21 pm |
| Which coring system? | 8/4/2003, 6:29 pm |
| experience w/ mini cole jaws?? | 8/4/2003, 2:00 pm |
| Plum wood | 8/4/2003, 12:36 pm |
| CA Glue in bulk? | 8/4/2003, 12:07 pm |
| Finally a pic. *PIC* | 8/4/2003, 9:10 am |
| Magnolia Wood | 8/4/2003, 4:45 am |
| My New website *LINK* | 8/3/2003, 10:13 pm |
| Curly Maple vessel *PIC* | 8/3/2003, 8:37 pm |
| Sharpening a chainsaw | 8/3/2003, 1:12 pm |
| DVR 3000 Owners | 8/3/2003, 10:22 am |
| Thanks Bill & Lisa | 8/3/2003, 7:20 am |
| DEAD CUP CENTER | 8/3/2003, 1:58 am |
| Dust particle science | 8/3/2003, 12:48 am |
| Gloat, and rant... | 8/2/2003, 10:28 pm |
| More Pen kit questions | 8/2/2003, 12:21 am |
| Offside turning | 8/1/2003, 10:34 pm |
| Need a tap | 8/1/2003, 9:57 pm |
| another beginner's question | 8/1/2003, 8:28 pm |
| What's the deal with Jet support??? | 8/1/2003, 5:33 pm |
| VB36 LATHE | 8/1/2003, 3:28 pm |
| Charmed Bowl *PIC* | 8/1/2003, 12:03 pm |
| HSS vs Powdered metal | 8/1/2003, 11:35 am |
| DVR 3000 | 8/1/2003, 9:46 am |
| Two new articles on A&R | 8/1/2003, 1:13 am |
| ELLIS! Posting and replying still troublesome | 7/31/2003, 11:02 pm |
| Bowl Saving: An Comprehensive Discussion | 7/31/2003, 9:55 pm |
| Newbie's first try (longish) | 7/31/2003, 4:31 pm |
| New member and New DVR 3000 | 7/31/2003, 11:13 am |
| Tonight's chat (glue size) | 7/31/2003, 9:03 am |
| THANKS ART | 7/31/2003, 8:44 am |
| Reminder, server going down | 7/30/2003, 11:54 pm |
| Rockwell/Delta 46-612 lathe *PIC* | 7/30/2003, 8:56 pm |
| Server Maintenance Tonight | 7/30/2003, 6:54 pm |
| Turned box - Unghhh *PIC* | 7/30/2003, 1:59 pm |
| Fruit Bowl - Rosewood/Maple *PIC* *PIC* | 7/30/2003, 1:50 pm |
| Witches brew vs bought brew? | 7/30/2003, 7:57 am |
| melaleuca wood | 7/30/2003, 12:43 am |
| narrow parting tool | 7/29/2003, 10:50 pm |
| Inside-out detail *PIC* | 7/29/2003, 10:48 pm |
| inside-out ornament *PIC* | 7/29/2003, 10:46 pm |
| Local source for Anchorseal | 7/29/2003, 9:59 am |
| Turning Chat 7/30/03 with Art L | 7/29/2003, 8:16 am |
| Saying Hello with sample and credits *PIC* | 7/29/2003, 3:52 am |
| A Pat on Jet's Back | 7/28/2003, 10:13 pm |
| source for 4 step jaw self centering chuck? | 7/28/2003, 8:48 pm |
| What would you have done? *PIC* | 7/28/2003, 3:13 pm |
| Finally got back to my lathe *PIC* | 7/27/2003, 9:00 pm |
| Wood Magazine turned box (Pics) | 7/27/2003, 8:56 pm |
| Small Maple Box | 7/27/2003, 4:31 pm |
| Two new books on the Benefit Auctions page.... *NM* | 7/27/2003, 2:08 pm |
| Nova Outrigger | 7/27/2003, 9:38 am |
| Mounting big bowls | 7/27/2003, 9:23 am |
| Pillow Fight in the Shop! | 7/25/2003, 6:01 pm |
| Sparks in the dust collector? | 7/25/2003, 4:02 pm |
| Pole Lathe Plans ? | 7/25/2003, 11:55 am |
| Critiques and discussion of form | 7/25/2003, 11:10 am |
| Green wood returning | 7/25/2003, 11:08 am |
| Wedding Goblets *LINK* *PIC* | 7/25/2003, 10:53 am |
| Body Count for 5 Barns Picnic | 7/25/2003, 10:51 am |
| An admonition to the "experienced" woodturners | 7/25/2003, 10:21 am |
| Virus alert hoax *LINK* | 7/25/2003, 8:48 am |
| Some Thoughts | 7/24/2003, 10:15 pm |
| First Lathe (Gloat) | 7/24/2003, 5:48 pm |
| Segmented Bowl Inlay Paterns | 7/24/2003, 5:18 pm |
| Request for tool holder ideas. | 7/24/2003, 3:54 pm |
| Five Barns Final Countdown! | 7/24/2003, 2:18 pm |
| OW live center parts fit on a Jet? *PIC* | 7/24/2003, 1:05 pm |
| Angle Prototype *PIC* | 7/24/2003, 1:02 pm |
| Preferred Tool Rest ? | 7/24/2003, 9:00 am |
| Duplicating without a duplicator | 7/24/2003, 8:36 am |
| Merrill Saylon | 7/24/2003, 12:06 am |
| pin chuck | 7/23/2003, 9:29 pm |
| new local AAW chapter N.C. | 7/23/2003, 9:10 pm |
| Identify wood from Dallas area *PIC* | 7/23/2003, 6:52 pm |
| SCREW CHUCK | 7/23/2003, 2:33 pm |
| What's tonights topic? *NM* | 7/23/2003, 1:04 pm |
| Just some peppermills *PIC* | 7/23/2003, 7:42 am |
| We're b-a-a-c-k. 3 New Articles | 7/22/2003, 11:23 pm |
| Friction fit box lids | 7/22/2003, 8:17 pm |
| Live Centers | 7/22/2003, 1:46 pm |
| more flowers *PIC* | 7/21/2003, 9:03 pm |
| WARNING !!! DeWalt charger | 7/21/2003, 9:03 pm |
| flower(s) *PIC* | 7/21/2003, 9:02 pm |
| How Much Is This Lathe Worth? *PIC* | 7/21/2003, 6:46 pm |
| File Handle | 7/21/2003, 4:59 pm |
| Two things NOT to do - especially at the same time | 7/21/2003, 4:43 pm |
| broken banjo...again | 7/21/2003, 3:53 pm |
| Birmingham, AL | 7/21/2003, 1:26 pm |
| Pen question | 7/21/2003, 12:01 pm |
| Sanding | 7/21/2003, 8:45 am |
| Does Beech Always Crack? | 7/21/2003, 1:16 am |
| End Grain Tear-out on Bowl | 7/20/2003, 10:19 pm |
| brail bowl *PIC* | 7/20/2003, 9:42 pm |
| burl box *PIC* | 7/20/2003, 9:38 pm |
| Lathe lighting *PIC* | 7/20/2003, 7:22 pm |
| Roughing Gouge *PIC* | 7/20/2003, 6:40 pm |
| wood identity (trying it again) *PIC* | 7/20/2003, 4:34 pm |
| wood identity | 7/20/2003, 4:33 pm |
| July's 'Products Showcase' added to Creative Woodt *LINK* | 7/20/2003, 2:17 pm |
| Last few days on benefit auctions page | 7/20/2003, 10:38 am |
| My feet hurt... | 7/19/2003, 11:22 pm |
| Second attempt.... *PIC* | 7/19/2003, 9:50 pm |
| cedar bowl *PIC* | 7/19/2003, 9:44 pm |
| On topic, and an off topic gloat: | 7/19/2003, 7:14 pm |
| cookies *NM* | 7/19/2003, 7:01 pm |
| NEW DVR | 7/19/2003, 3:43 pm |
| 20" Oneway Easy Core Set For Sale | 7/19/2003, 7:56 am |
| Cellular structure *LINK* | 7/19/2003, 12:25 am |
| Tool presentation question | 7/18/2003, 8:00 pm |
| Grinding Wheel Source *PIC* | 7/18/2003, 9:55 am |
| Concrete late | 7/17/2003, 10:23 pm |
| moon box *PIC* | 7/17/2003, 10:17 pm |
| Inside-out turning *PIC* | 7/17/2003, 10:11 pm |
| Turning IPE | 7/17/2003, 9:10 pm |
| Irons Gate | 7/17/2003, 11:15 am |
| Woodturning resources on Maui? | 7/16/2003, 10:22 pm |
| Thanks, John Lucas | 7/16/2003, 9:27 pm |
| Turning Topic 7/16 Storms permitting | 7/16/2003, 7:21 pm |
| Nova DVR Voltage Change | 7/16/2003, 5:16 pm |
| New Segmented Bowl / Pics *PIC* | 7/16/2003, 5:03 pm |
| Hanging DC | 7/16/2003, 3:33 pm |
| stablizing hardwood | 7/16/2003, 3:33 pm |
| Wood Mag - screws into endgrain? | 7/16/2003, 1:40 pm |
| burnishing | 7/16/2003, 9:20 am |
| ebonizing with india ink? | 7/16/2003, 12:14 am |
| G1495 / G5979 | 7/15/2003, 5:46 pm |
| Sweetgum... | 7/15/2003, 2:49 pm |
| wish me luck | 7/15/2003, 12:20 am |
| slow down a lathe | 7/14/2003, 8:07 pm |
| PM3520A Spindle.. | 7/14/2003, 4:51 pm |
| Picture question. | 7/14/2003, 12:03 pm |
| Lamps | 7/14/2003, 11:55 am |
| Mulberry Bowl *PIC* | 7/14/2003, 11:42 am |
| laminated candlesticks | 7/14/2003, 10:24 am |
| finishing question | 7/14/2003, 8:05 am |
| HOW TO BURL TREES? | 7/14/2003, 3:05 am |
| Did you know about this? *LINK* | 7/14/2003, 1:55 am |
| Pics of a kid in bliss: *PIC* | 7/13/2003, 9:57 pm |
| LOOKING FOR WOODTURNING GROUPS | 7/13/2003, 9:25 pm |
| LOML's table *PIC* | 7/13/2003, 9:08 pm |
| Ornaments *PIC* | 7/13/2003, 9:00 pm |
| Need some advice WC - Long | 7/12/2003, 9:13 pm |
| New Website | 7/12/2003, 8:17 pm |
| Waaahooooooo! Another lathe gloat! | 7/12/2003, 12:48 am |
| Brenda Behrens Online Exhibition *LINK* *PIC* | 7/11/2003, 11:25 pm |
| Delta Slow Speed Grinder & Wolverine? | 7/11/2003, 4:42 pm |
| Pierce carved aspen turning *PIC* | 7/11/2003, 2:31 pm |
| Shaker Bowls *LINK* *PIC* | 7/11/2003, 11:49 am |
| Best Finish for Mesquite ? | 7/10/2003, 10:13 pm |
| 3/4" Roughing Gouge Question | 7/10/2003, 9:53 pm |
| It IS true . . | 7/10/2003, 8:47 pm |
| Pens For Friends Update | 7/10/2003, 5:27 pm |
| mini stand question | 7/10/2003, 5:00 pm |
| ¾” or 1-1/4” Spindle-Roughing Gouge ? | 7/10/2003, 4:32 pm |
| Delta GR450 VS Grinder | 7/10/2003, 11:23 am |
| lathe stand *PIC* *PIC* | 7/10/2003, 11:21 am |
| Woodturner Pro Centering jig | 7/10/2003, 9:39 am |
| for the birds.... *PIC* | 7/9/2003, 7:14 pm |
| wolverine is working | 7/9/2003, 2:22 pm |
| Cookies [ellis delete] *NM* | 7/9/2003, 1:04 pm |
| Delta Lathe Model 46-541P | 7/9/2003, 12:34 pm |
| How to change belts with a bolted down motor... | 7/9/2003, 9:37 am |
| Turning crotch pieces. Final Destination *PIC* | 7/9/2003, 9:23 am |
| Turning Topic for 7/9/03 Shapes *LINK* | 7/9/2003, 8:43 am |
| Dennis Stewart e-mail | 7/9/2003, 12:22 am |
| my 2nd turned bowl w/pic | 7/8/2003, 9:38 pm |
| website | 7/8/2003, 6:29 pm |
| 5 Barns Picnic Update | 7/8/2003, 3:06 pm |
| Turned this last night (PIC) | 7/8/2003, 10:45 am |
| Re: grinder | 7/7/2003, 11:46 pm |
| AAW pictures? | 7/7/2003, 10:31 pm |
| Chris Pye Book? | 7/7/2003, 5:00 pm |
| Gloat-despair...Still a gloat! - Long | 7/7/2003, 4:21 pm |
| Need some Kelton help | 7/7/2003, 10:41 am |
| Sightings Picture help :-) | 7/6/2003, 11:35 pm |
| SmartMiter for segmented turning *PIC* | 7/6/2003, 10:45 pm |
| beginner's problem | 7/6/2003, 12:59 am |
| New book offering on the Benefit Auctions page *NM* | 7/5/2003, 11:22 pm |
| Turning stuff in Daytona Beach | 7/5/2003, 11:11 pm |
| Removing DVR Headstock | 7/5/2003, 10:30 am |
| 2 X 4 Bowl | 7/5/2003, 9:24 am |
| AAW - Symposium - Pictures *LINK* *PIC* | 7/4/2003, 8:30 am |
| Need someone to install dust collection system | 7/4/2003, 4:47 am |
| More on Minwax Wipe-On Poly | 7/3/2003, 10:52 pm |
| Two Bandsaw Articles Plus | 7/3/2003, 10:50 pm |
| Minwax and the lathe | 7/3/2003, 12:16 pm |
| Brass ferrules for tools | 7/3/2003, 9:10 am |
| Wipe On Poly - Colour Changes | 7/3/2003, 4:49 am |
| Wood Pile & Termites..... | 7/3/2003, 2:47 am |
| Tonight's Turning Topic 7/2/03 *LINK* | 7/2/2003, 7:20 pm |
| Tung Oil for Pens | 7/2/2003, 6:02 pm |
| Bugspray on turning blanks before storage? | 7/2/2003, 3:57 pm |
| Wipe-on Poly vs Danish Oil | 7/2/2003, 2:15 pm |
| Turning Magnolia | 7/2/2003, 9:03 am |
| ? # 2 | 7/2/2003, 1:41 am |
| ? # 1 | 7/2/2003, 1:37 am |
| Looking for William B Noble | 7/2/2003, 12:12 am |
| Powered Faceshield/Dustmask | 7/1/2003, 8:17 pm |
| Barrel Trimmer ? | 7/1/2003, 3:41 pm |
| Urgently needed...gopher wood and plans | 7/1/2003, 1:51 pm |
| looking for pics | 7/1/2003, 1:19 pm |
| July's 'Showcase' added to Creative Woodturning - *LINK* | 7/1/2003, 1:10 pm |
| 1 New Article, 2 New Reviews, & 2 New Tips | 7/1/2003, 12:17 am |
| Minwax Wipe-On Poly - ? | 6/30/2003, 10:25 pm |
| WHICH LATHE ? *LINK* | 6/30/2003, 8:17 pm |
| How much of the pith do you | 6/30/2003, 5:43 pm |
| Wood-Cut Tru-Grind | 6/30/2003, 4:05 pm |
| Outboard Turning & Vicmarc? | 6/30/2003, 8:06 am |
| small segmented vessel | 6/29/2003, 11:08 pm |
| Xmas Oranaments/designs | 6/29/2003, 11:07 pm |
| Not one but TWO Starburst Veneer Layups | 6/29/2003, 11:00 pm |
| Want a Multi-axis Mortiser? | 6/29/2003, 6:40 pm |
| Want to add an economical Laser to your Mitre Saw? | 6/29/2003, 4:14 pm |
| chucks | 6/29/2003, 3:13 pm |
| An Under Appreciated Turning Tool | 6/29/2003, 10:55 am |
| Turned boxes w/ lid *PIC* | 6/29/2003, 10:35 am |
| Couple of turned boxes *PIC* | 6/29/2003, 10:25 am |
| *OT* New use for CA glue | 6/29/2003, 9:56 am |
| Incredible Stuff *LINK* | 6/29/2003, 8:14 am |
| oak bowl PICs | 6/29/2003, 8:08 am |
| signing your work | 6/29/2003, 7:53 am |
| Jigs, Tips & Tricks | 6/28/2003, 11:32 am |
| Turning Topic for 7/02/03 Special tools *LINK* | 6/28/2003, 10:53 am |
| Pith a Problem ? | 6/28/2003, 8:39 am |
| pleasant turning with big leaf burl | 6/27/2003, 9:20 pm |
| Bottle Stoppers | 6/27/2003, 8:04 pm |
| Sorby Multitip Tool RS200KT and Honing | 6/27/2003, 7:23 pm |
| Turning Lilac | 6/27/2003, 2:24 pm |
| Best place to add weight to lathe. High or Low? | 6/27/2003, 1:16 pm |
| BANKSIA PODS | 6/27/2003, 10:15 am |
| How To Easily Resharpen Dull Bandsaw Blades | 6/27/2003, 8:26 am |
| Stop at 220 grit? | 6/26/2003, 10:37 pm |
| Stacked and Squashed Bowls | 6/26/2003, 9:52 pm |
| Supernova Chuck | 6/26/2003, 9:24 pm |
| Acorn Top *PIC* | 6/26/2003, 1:53 pm |
| Couple of questions... | 6/26/2003, 10:48 am |
| Vicmark - Outboard? | 6/26/2003, 8:54 am |
| Anyone Tired Bowl Skews???? | 6/26/2003, 12:46 am |
| Longbed vs Shortbed Lathes | 6/25/2003, 10:42 pm |
| Natural edge birch bowls | 6/25/2003, 9:38 pm |
| trip to NC | 6/25/2003, 8:53 pm |
| Trip to Seattle | 6/25/2003, 6:49 pm |
| 2 dumb questions from a novice turner | 6/25/2003, 6:19 pm |
| Wed night turning topic, 6/25 *LINK* | 6/25/2003, 4:21 pm |
| Rollerball Kit Question | 6/25/2003, 3:54 pm |
| Hey Barbara Gill/ or other cottonwood turners | 6/25/2003, 3:38 pm |
| Wolverine Vari-grind purchase | 6/25/2003, 10:43 am |
| Weed Pots *PIC* | 6/25/2003, 9:11 am |
| Stoping Spalting and Drying Bowl | 6/24/2003, 11:25 pm |
| My first attempt at turning | 6/24/2003, 11:01 pm |
| video discount tapes | 6/24/2003, 5:43 pm |
| Wet Sanding *LINK* | 6/24/2003, 4:00 pm |
| Electric ROS for lathe work *LINK* | 6/24/2003, 3:32 pm |
| Jen/Gary Hern... | 6/24/2003, 1:41 pm |
| Book Reiews | 6/24/2003, 1:12 pm |
| Pasadena | 6/24/2003, 11:01 am |
| Tool Nut | 6/24/2003, 10:43 am |
| First Gallery | 6/24/2003, 9:15 am |
| shop heating | 6/24/2003, 4:19 am |
| A few more turnings. *PIC* | 6/24/2003, 12:32 am |
| I'm serious about my art! *PIC* | 6/24/2003, 12:30 am |
| wood lathe duplicators | 6/24/2003, 12:01 am |
| Dry blanks in Atlanta? | 6/23/2003, 7:58 pm |
| Indanapolis Trip | 6/23/2003, 6:48 pm |
| Jaws! | 6/23/2003, 5:31 pm |
| Calling John Lucas | 6/23/2003, 4:58 pm |
| Spindle Diameter to Length | 6/22/2003, 9:42 pm |
| Amazing | 6/22/2003, 11:00 am |
| Bandsaw box for Mike Rubes *PIC* | 6/21/2003, 10:55 pm |
| Bowl that morphed *LINK* | 6/21/2003, 10:40 pm |
| Bowl that morphed | 6/21/2003, 10:38 pm |
| Mini lathes | 6/21/2003, 9:44 pm |
| FWW! | 6/21/2003, 9:33 pm |
| Myrtlewood and Turquoise *PIC* | 6/21/2003, 8:13 pm |
| Curley Maple Bowl *PIC* | 6/21/2003, 5:56 pm |
| Bottom view *NM* *PIC* | 6/21/2003, 1:47 pm |
| Maple Burl Bowl *PIC* | 6/21/2003, 1:47 pm |
| Wet Cherry finished | 6/21/2003, 6:57 am |
| Box Elder with textured band *PIC* | 6/21/2003, 12:09 am |
| Hey, Wally | 6/20/2003, 10:22 pm |
| Lathe speed | 6/20/2003, 6:11 pm |
| Question about turned birdhouses | 6/20/2003, 5:50 pm |
| Hey, Dane..... | 6/20/2003, 11:47 am |
| Padadena Symposium | 6/20/2003, 11:25 am |
| Segmented glueup question | 6/20/2003, 8:47 am |
| forming AAW chapter in Cashiers, NC area | 6/20/2003, 8:29 am |
| ikebana vases | 6/20/2003, 1:37 am |
| Fountain Pen *PIC* | 6/20/2003, 12:01 am |
| ANTLERS!! | 6/19/2003, 11:21 pm |
| Pens For Friends Update | 6/19/2003, 6:31 pm |
| Tips for better boiling | 6/19/2003, 2:47 pm |
| AAW Symposium Educational Benefit Auction *LINK* | 6/19/2003, 1:33 pm |
| Ellis...T-shirt progress? | 6/19/2003, 10:41 am |
| Ideal Roughing Gouge? | 6/19/2003, 8:58 am |
| Turning on the Shopsmith *PIC* | 6/18/2003, 8:53 pm |
| Cheap Sorby chisels *LINK* | 6/18/2003, 7:28 pm |
| Tonight's Turning Topic 6/18 | 6/18/2003, 7:20 pm |
| Sanding Part 2 (Survey of Sanding Devices | 6/18/2003, 6:01 pm |
| Open Segmented Vessel *PIC* | 6/18/2003, 4:57 pm |
| A Walnut bowl *PIC* | 6/18/2003, 3:42 pm |
| 3520 comes tomorrow | 6/18/2003, 2:44 pm |
| Chuck Jaws - #2 or #3? | 6/18/2003, 1:38 pm |
| Help me solve cracked bowl mystsery! *PIC* | 6/18/2003, 1:31 pm |
| Orange Wax | 6/18/2003, 1:23 pm |
| WAT OT...My hero is... | 6/18/2003, 12:58 pm |
| Blue Spruce | 6/18/2003, 12:25 pm |
| Tormek and honing | 6/18/2003, 11:33 am |
| Turning 2003 Symposium | 6/18/2003, 9:17 am |
| Drill chuck for lathe | 6/18/2003, 8:52 am |
| Older Norfolk Pine *PIC* | 6/18/2003, 12:07 am |
| Norfolk Pine tree *PIC* | 6/18/2003, 12:04 am |
| Cigarette Case Kit ??? | 6/17/2003, 9:03 pm |
| A not so good turning day *PIC* | 6/17/2003, 7:44 pm |
| Velvit Oil -- what is it? | 6/17/2003, 4:23 pm |
| My battle with cherry and a question. | 6/17/2003, 1:48 pm |
| Go Bowls... *PIC* | 6/17/2003, 12:49 pm |
| anchorseal | 6/17/2003, 12:45 pm |
| Beall Bowl Buffs vs. Klingspore | 6/17/2003, 12:26 pm |
| 2-3/4 lb. R/W Burl Bowl *PIC* | 6/17/2003, 12:16 pm |
| Three Pots *PIC* | 6/16/2003, 9:53 pm |
| Couple of Southwest Pots *PIC* | 6/16/2003, 7:56 pm |
| face shields | 6/16/2003, 7:42 pm |
| Jet 1442 | 6/16/2003, 6:23 pm |
| A Morning Spent with Bobby Clemons | 6/16/2003, 5:17 pm |
| pepper wood burl good for turning? | 6/16/2003, 12:56 pm |
| glue | 6/16/2003, 9:39 am |
| A floor | 6/16/2003, 9:25 am |
| Norfolk Island Pine *PIC* | 6/15/2003, 10:55 pm |
| I'm in Raleigh , N.C. and they have | 6/15/2003, 5:57 pm |
| Freezing wood blanks? | 6/15/2003, 5:53 pm |
| A whole slew of litte cracks *PIC* | 6/15/2003, 4:58 pm |
| N3K | 6/15/2003, 11:24 am |
| Natural edged bowls | 6/15/2003, 9:38 am |
| Things You Never Knew About Sanding & Sandpaper | 6/14/2003, 12:39 pm |
| WC Benefit Auction *LINK* | 6/14/2003, 11:48 am |
| Wine stopper dispay plans?? | 6/14/2003, 10:08 am |
| Where to get sheet neoprene? | 6/14/2003, 6:27 am |
| Penn State New chuck | 6/14/2003, 12:54 am |
| Powermatic 90 Lathe | 6/13/2003, 4:22 pm |
| Tormek jig setting for glaser gouge? | 6/13/2003, 3:14 pm |
| Hollow Form Video | 6/13/2003, 3:03 pm |
| Sanding Exotic Wood | 6/13/2003, 9:57 am |
| CA pen finish - how to? | 6/13/2003, 3:52 am |
| Scraps? What scraps? *PIC* | 6/12/2003, 11:19 pm |
| Willow Burl | 6/12/2003, 10:48 pm |
| @#$$#@@ Pen Mill! | 6/12/2003, 10:19 pm |
| Vacuum Chucking for Turned Eggs *PIC* | 6/12/2003, 10:10 pm |
| Need advice: Epoxy as filler | 6/12/2003, 9:43 pm |
| Stabilized Pen Blanks? | 6/12/2003, 2:18 pm |
| Sweetgum Potpourri Bowl *PIC* | 6/12/2003, 1:03 pm |
| Exotic Wood in Atlanta | 6/12/2003, 12:48 pm |
| Pens For Friends Reminder | 6/12/2003, 11:31 am |
| Skew Follow-up | 6/12/2003, 8:41 am |
| Suggestions for using show dye?? | 6/12/2003, 7:30 am |
| pneumatic drill/grinder | 6/12/2003, 7:07 am |
| Help me - I have this obsession with wood! *PIC* | 6/11/2003, 10:54 pm |
| Cherry, Maple, Walnut bowl *PIC* | 6/11/2003, 1:02 pm |
| Do I need a mini-lathe? | 6/11/2003, 12:32 pm |
| June's 'Products Showcase' added to Creative woodt *LINK* | 6/11/2003, 12:19 pm |
| Tonight's Turning Topic 6/11/03 | 6/11/2003, 8:49 am |
| Random Orbital Sanders | 6/10/2003, 11:33 pm |
| Need Help | 6/10/2003, 6:44 pm |
| The Conover Workshops | 6/10/2003, 4:57 pm |
| buying a lathe | 6/10/2003, 3:41 pm |
| Announcement - special exhibit in Pasadena | 6/10/2003, 1:40 pm |
| expansion chuck?? | 6/10/2003, 11:46 am |
| Oak Bowl with Moons *PIC* | 6/10/2003, 9:04 am |
| Wormy persimmon bowl, PICS | 6/10/2003, 7:50 am |
| Turning spalted wood | 6/10/2003, 7:13 am |
| Pin Chuck | 6/9/2003, 10:03 pm |
| Joe Pack... | 6/9/2003, 7:28 pm |
| Turning Topic for 6/11/03 | 6/9/2003, 7:06 pm |
| Favorite Bowl Gouge? | 6/9/2003, 4:23 pm |
| banjo is fixed - lesson learned | 6/9/2003, 3:49 pm |
| News about Articles&Reviews (Pls Read) | 6/9/2003, 12:43 pm |
| Redwood Burl | 6/9/2003, 10:55 am |
| Skew-Gouge Profile? | 6/9/2003, 10:02 am |
| jet Mini Lathe/Stronghold Chuck | 6/9/2003, 9:37 am |
| Mounting a Grinding Wheel... | 6/9/2003, 9:22 am |
| Good source for pen kits | 6/9/2003, 8:49 am |
| New Woodturners *PIC* | 6/8/2003, 9:08 pm |
| Everybodys doing it *PIC* | 6/8/2003, 7:28 pm |
| Finish for Bottle Stoppers | 6/8/2003, 5:57 pm |
| Hello Dave Peebles..... | 6/8/2003, 3:41 pm |
| Matched set... *LINK* *PIC* | 6/8/2003, 12:12 pm |
| Second bowl | 6/7/2003, 11:43 pm |
| Mesquite bowl *PIC* | 6/7/2003, 11:38 pm |
| Class with Wally *PIC* | 6/7/2003, 11:36 pm |
| FIrst Lathe? | 6/7/2003, 3:48 pm |
| calipers | 6/7/2003, 2:36 pm |
| stabilizing spalted burl | 6/7/2003, 12:43 pm |
| Got Shavings !! | 6/7/2003, 9:44 am |
| Report on turning Hemlock | 6/6/2003, 6:41 pm |
| formal introduction *PIC* | 6/5/2003, 11:19 pm |
| Thumbs Up ! | 6/5/2003, 6:58 pm |
| New lathe - grinder recommendation? | 6/5/2003, 6:32 pm |
| Pens For Friends (Long) *LINK* | 6/5/2003, 5:45 pm |
| maple burl purchase | 6/5/2003, 5:32 pm |
| First Lathe Tool and Walnut Gloat! *PIC* | 6/5/2003, 4:05 pm |
| I've been tricked! | 6/5/2003, 3:38 pm |
| Tool Handle How to? | 6/5/2003, 3:37 pm |
| Turning Southern Style Symposium *LINK* | 6/5/2003, 3:36 pm |
| Jet1236+SuperNova+insert? | 6/5/2003, 12:56 pm |
| new store opening | 6/5/2003, 12:27 pm |
| Turning Smock | 6/5/2003, 7:43 am |
| What a Company! | 6/4/2003, 9:49 pm |
| Tonight's Turning Topic 6/4/03 | 6/4/2003, 9:03 pm |
| New Member | 6/4/2003, 5:18 pm |
| Lathe alignment question *PIC* | 6/4/2003, 5:07 pm |
| Reed or Read Faceplate | 6/4/2003, 9:40 am |
| candlestick making | 6/4/2003, 8:53 am |
| Wow, what just happened? | 6/4/2003, 7:37 am |
| Hey, Rick R, So Cal... | 6/4/2003, 12:40 am |
| Whoops!! | 6/3/2003, 10:45 pm |
| Canary Wood *LINK* *PIC* | 6/3/2003, 10:01 pm |
| Woodcraft green wood sealer | 6/3/2003, 8:12 pm |
| Peter Bloch Lampshades *LINK* | 6/3/2003, 7:44 pm |
| Lessons learned | 6/3/2003, 6:20 pm |
| General Maxi-Lathe *LINK* | 6/3/2003, 6:12 pm |
| PM3520A spindle problem fixed | 6/3/2003, 5:42 pm |
| Laser, and non-captured Hollowing Tools | 6/3/2003, 4:39 pm |
| Turning crotch pieces. From here........... *PIC* | 6/3/2003, 4:17 pm |
| HTML Assistance | 6/3/2003, 1:42 pm |
| Depth gauge for natural edge.... *PIC* | 6/3/2003, 11:51 am |
| Using HSS drill bit shafts?? | 6/3/2003, 7:50 am |
| Goblets *PIC* | 6/3/2003, 7:30 am |
| My PM3520A.... | 6/3/2003, 1:43 am |
| 99 Ways Woodworkers Delude Themselves *LINK* | 6/2/2003, 11:23 pm |
| Lathe is in...what else do I need? | 6/2/2003, 11:02 pm |
| 5 Barns Picnic Update | 6/2/2003, 7:19 pm |
| Mushrooms *PIC* | 6/2/2003, 7:03 pm |
| ProForme - Anybody | 6/2/2003, 6:50 pm |
| Hey Scott Greaves! | 6/2/2003, 4:48 pm |
| Wow, some really nice work lately. | 6/2/2003, 3:55 pm |
| Myrtlewood Vessel *PIC* | 6/2/2003, 11:36 am |
| WARNING !!! | 6/2/2003, 7:36 am |
| My first timme *PIC* | 6/2/2003, 1:01 am |
| Holly Petal Bowl - Side View *PIC* | 6/2/2003, 12:03 am |
| Some small bowls | 6/1/2003, 9:07 pm |
| New Articles of Interest | 6/1/2003, 8:54 pm |
| Annual International Wood Collectors Society (IWCS *LINK* | 6/1/2003, 7:17 pm |
| catalpa | 6/1/2003, 6:23 pm |
| DIY Ellsworth jig? | 6/1/2003, 12:15 pm |
| Pith help. | 6/1/2003, 12:06 pm |
| DIY Centering Jig *LINK* | 6/1/2003, 11:45 am |
| Turning mushrooms | 6/1/2003, 8:17 am |
| Art Liestman Showcase on Creative Woodturning *LINK* | 6/1/2003, 4:56 am |
| Photography | 5/31/2003, 10:58 pm |
| John Jordan Taping | 5/31/2003, 10:47 pm |
| Reconstituting Anchorseal revisited. | 5/31/2003, 10:45 pm |
| Ashley Isles Narrow Parting Tool *PIC* | 5/31/2003, 10:38 pm |
| Curly Maple two tone *PIC* | 5/31/2003, 9:47 pm |
| Walnut burl Hollow Vessel *PIC* | 5/31/2003, 9:38 pm |
| Birch burl question *PIC* | 5/31/2003, 8:30 pm |
| Am I using the wrong wood? | 5/31/2003, 8:29 pm |
| So there I was..... *PIC* | 5/31/2003, 7:50 pm |
| More Woodturning | 5/31/2003, 6:39 pm |
| Members in Northern WI ? | 5/31/2003, 6:23 pm |
| Broken Banjo | 5/31/2003, 4:55 pm |
| Chainsaw sprocket lube | 5/31/2003, 11:47 am |
| Home brew finish question | 5/30/2003, 11:28 pm |
| Time in DCA | 5/30/2003, 10:56 pm |
| chainsaw purchase advice | 5/30/2003, 7:17 pm |
| New to turning (sorta) | 5/30/2003, 5:00 pm |
| New to Turning | 5/30/2003, 4:59 pm |
| Aluminum Faceplates? | 5/30/2003, 8:24 am |
| Calling all PM3520A owners again | 5/30/2003, 1:54 am |
| maple burl bowl *PIC* | 5/29/2003, 10:36 pm |
| OT - Rustic Chairs *LINK* | 5/29/2003, 8:23 pm |
| No Accounting For Quality | 5/29/2003, 6:18 pm |
| Wood gloat and blank preparation question. *PIC* | 5/29/2003, 4:58 pm |
| Visiting | 5/29/2003, 3:20 pm |
| PM 3520A Owners | 5/29/2003, 2:47 pm |
| Refrig Magnets and Weeds for Turning *PIC* | 5/29/2003, 11:47 am |
| Bark...Remove | 5/29/2003, 9:52 am |
| Tail Stock Heat? | 5/29/2003, 9:22 am |
| air compressor - need advice | 5/29/2003, 9:16 am |
| Off thread/On thread | 5/29/2003, 8:03 am |
| Revolving Live Centers | 5/29/2003, 3:00 am |
| Article on Making A Pen *LINK* | 5/28/2003, 11:25 pm |
| Got wood? *pic* *PIC* | 5/28/2003, 10:59 pm |
| A Great Forum, Thank You | 5/28/2003, 10:55 pm |
| Feeling groovy... | 5/28/2003, 10:50 pm |
| new pic *PIC* | 5/28/2003, 9:28 pm |
| Help with fingernail grindhttp://cerealport.net/.w | 5/28/2003, 7:38 pm |
| Free wood | 5/28/2003, 3:26 pm |
| Couple of Canary wood bowls *PIC* | 5/28/2003, 3:18 pm |
| A Beaded Vessel *PIC* | 5/28/2003, 2:42 pm |
| Is there any difference... | 5/28/2003, 1:42 pm |
| ***Maintenance Tonight*** | 5/28/2003, 12:12 pm |
| All in All; a good week (long) | 5/28/2003, 11:10 am |
| Live Center for Jet Mini? | 5/28/2003, 10:58 am |
| Dominic Greco Angle sled | 5/28/2003, 10:10 am |
| My Turn. *PIC* | 5/28/2003, 7:05 am |
| PM3520A.. | 5/28/2003, 1:40 am |
| A small potpourri bowl *PIC* | 5/27/2003, 9:11 pm |
| Cherry, ebony, and maple bowl | 5/27/2003, 9:08 pm |
| Might as well try the pic thing *PIC* | 5/27/2003, 8:26 pm |
| Which Chisel to start | 5/27/2003, 8:26 pm |
| Small Gloate | 5/27/2003, 8:16 pm |
| Turning Topic for 5/28/03 | 5/27/2003, 5:24 pm |
| Turning site with neat flash intro *LINK* | 5/27/2003, 12:54 pm |
| Picture Uploads (Again) *PIC* | 5/27/2003, 12:34 pm |
| AAW Symposium | 5/27/2003, 9:10 am |
| Profiles working for me! | 5/27/2003, 8:56 am |
| A very skinny bowl | 5/26/2003, 8:01 pm |
| Chucks and Jaws - what fits whose? | 5/26/2003, 6:56 pm |
| How do YOU finish? | 5/26/2003, 5:05 pm |
| CA finish for pens | 5/26/2003, 5:02 pm |
| Help on making spheres | 5/26/2003, 4:12 pm |
| Profiles | 5/26/2003, 12:58 pm |
| For Bertie Pittman...... | 5/26/2003, 11:19 am |
| Translucent bowl pic *PIC* | 5/25/2003, 11:31 pm |
| One last view of that bench *NM* *PIC* | 5/25/2003, 10:59 pm |
| Another pic of the bench below *NM* *PIC* | 5/25/2003, 10:53 pm |
| A little OT, but it's wood, and I'd like opinions *PIC* | 5/25/2003, 10:40 pm |
| OK, an experimental bowl from me, too *PIC* | 5/25/2003, 8:57 pm |
| Sunday in the shop | 5/25/2003, 8:14 pm |
| So...I bought...... *PIC* | 5/25/2003, 8:13 pm |
| Boiling | 5/25/2003, 4:16 pm |
| Dyed Platter *PIC* | 5/25/2003, 3:20 pm |
| Lid inlay... *PIC* | 5/25/2003, 3:12 pm |
| OK...one more box... *PIC* | 5/25/2003, 2:59 pm |
| And one more box... *PIC* | 5/25/2003, 2:58 pm |
| Here's another box... *PIC* | 5/25/2003, 2:57 pm |
| Here a box... *PIC* | 5/25/2003, 2:55 pm |
| Grandson wants a Top | 5/25/2003, 1:33 pm |
| Ellis... | 5/25/2003, 12:47 pm |
| A bowlmaker on Ebay *LINK* | 5/25/2003, 8:44 am |
| Test pic *PIC* | 5/25/2003, 12:23 am |
| Ellis... | 5/24/2003, 10:53 pm |
| Which Chuck, Talon or Super Nova? | 5/24/2003, 10:19 pm |
| Hawaiian woods | 5/24/2003, 9:36 pm |
| My turn for a pic *PIC* | 5/24/2003, 9:21 pm |
| A Bowl *PIC* | 5/24/2003, 4:50 pm |
| motor problem | 5/24/2003, 3:47 pm |
| Another test PIC *PIC* | 5/24/2003, 10:01 am |
| A visit from Dick Sing *PIC* | 5/24/2003, 2:31 am |
| Brass Inlay *PIC* | 5/24/2003, 2:15 am |
| A Turned Lidded Box *PIC* | 5/23/2003, 11:15 pm |
| test pic *PIC* | 5/23/2003, 10:18 pm |
| Open segment *PIC* | 5/23/2003, 10:10 pm |
| My turn *PIC* | 5/23/2003, 7:25 pm |
| Wood is good and free wood is great! | 5/23/2003, 7:19 pm |
| Gotta play, too *PIC* | 5/23/2003, 5:48 pm |
| Bowl Pic *PIC* | 5/23/2003, 5:13 pm |
| George Troy Photo-test *PIC* | 5/23/2003, 3:01 pm |
| Thanks *PIC* | 5/23/2003, 1:57 pm |
| Glad it works.... | 5/23/2003, 1:41 pm |
| Nichols lathe for sale | 5/23/2003, 1:19 pm |
| My Test *PIC* | 5/23/2003, 12:33 pm |
| Another pic test *NM* *PIC* | 5/23/2003, 11:45 am |
| Pic Test.. *PIC* | 5/23/2003, 11:30 am |
| PIC Test -- Jack Brown at WNYWT *LINK* *PIC* | 5/23/2003, 11:26 am |
| However you're doing the pics.... | 5/23/2003, 11:06 am |
| PIC test *NM* *PIC* | 5/23/2003, 10:57 am |
| pic test *NM* *PIC* | 5/23/2003, 10:46 am |
| Picture upload test *PIC* | 5/23/2003, 8:49 am |
| Studio Audience | 5/23/2003, 6:43 am |
| Three New Articles on A&R *LINK* | 5/22/2003, 10:00 pm |
| Terry, I'll be there at 9...... | 5/22/2003, 9:46 pm |
| What kind of tree is this? *LINK* | 5/22/2003, 8:54 pm |
| Brass powder instead of sawdust for filling cracks | 5/22/2003, 2:01 pm |
| Woodcraft pen kits... work with other brands? | 5/22/2003, 1:26 pm |
| Crack fixable? | 5/22/2003, 11:08 am |
| How do you save time roughing bowls? | 5/22/2003, 12:52 am |
| Jet Mini Lathe | 5/21/2003, 11:17 pm |
| AC vs DC | 5/21/2003, 11:17 pm |
| trying to fix my profile... *NM* | 5/21/2003, 10:37 pm |
| Tonights Turning Topic | 5/21/2003, 7:33 pm |
| Hollow vessel keeps snapping off! | 5/21/2003, 7:14 pm |
| Some things I've been Turning.... | 5/21/2003, 4:51 pm |
| Minneapolis | 5/21/2003, 10:55 am |
| Turning Book Auction | 5/21/2003, 8:25 am |
| Chucking Challenge | 5/21/2003, 7:48 am |
| segmented turnings | 5/20/2003, 9:07 pm |
| Hey, it's me!! | 5/20/2003, 8:28 pm |
| "Old iron" lathe question | 5/20/2003, 8:13 pm |
| Critiques | 5/20/2003, 6:01 pm |
| Gloat, brag, etc | 5/20/2003, 5:54 pm |
| Trying some new shapes w/ Many Pics | 5/20/2003, 5:15 pm |
| Two new articles on A&R *LINK* | 5/20/2003, 10:37 am |
| silver leaf | 5/20/2003, 9:49 am |
| Get yer bids in; benefit WC!!! | 5/20/2003, 9:40 am |
| Bedan part 1 *LINK* | 5/20/2003, 3:43 am |
| New Teknatool Chuck | 5/19/2003, 11:44 pm |
| End Grain | 5/19/2003, 10:38 pm |
| Is it just me? | 5/19/2003, 9:42 pm |
| GENERAL 26020VD-M2 Owners... *LINK* | 5/19/2003, 9:07 pm |
| Cutting Sandpaper with a Bandsaw | 5/19/2003, 3:36 pm |
| Best price on Husky chainsaw? | 5/19/2003, 2:44 pm |
| Used my faceshield... | 5/19/2003, 2:09 pm |
| Woodturning Book Auction for WC! | 5/19/2003, 12:05 pm |
| Skewchigouge | 5/19/2003, 11:40 am |
| Black Walnut in RDU | 5/19/2003, 8:55 am |
| Weed pots and Mushrooms Cracking *LINK* | 5/19/2003, 7:31 am |
| Surplus Supply in Lincoln NE? | 5/19/2003, 7:31 am |
| Sandpapers & Sanding - Comments pls. (V. LONG) | 5/18/2003, 11:11 pm |
| Darn it Russ | 5/18/2003, 10:42 pm |
| Jewelry box | 5/18/2003, 10:41 pm |
| Variable Speed | 5/18/2003, 9:41 pm |
| So am I officially a turner now? | 5/18/2003, 9:28 pm |
| Powercrafter question *LINK* | 5/18/2003, 8:42 pm |
| Russ, a Glue Question... | 5/18/2003, 6:44 pm |
| Blasted Ebony bleed through! | 5/18/2003, 12:44 pm |
| The baby is back!! Questions, | 5/18/2003, 12:21 pm |
| General Maxi lathe | 5/18/2003, 11:35 am |
| Fathers Day is coming... *LINK* | 5/18/2003, 9:09 am |
| Black Mulberry burl | 5/18/2003, 12:18 am |
| Chain Saw Questions | 5/17/2003, 11:25 pm |
| Turning Hemlock? | 5/17/2003, 7:33 pm |
| Jet Mini Stand Advice, Thanks!! | 5/17/2003, 6:23 pm |
| Jet Mini/Delta Midi Lathes | 5/17/2003, 6:15 pm |
| Some considerations for CA glue | 5/17/2003, 11:34 am |
| Boase Tribute | 5/17/2003, 10:35 am |
| Trying #1 again *NM* *PIC* | 5/17/2003, 2:06 am |
| Photo #3 *NM* *PIC* | 5/17/2003, 2:04 am |
| Next photo *NM* *PIC* | 5/17/2003, 2:03 am |
| First posting of *pics* | 5/17/2003, 2:01 am |
| sanding discs for power sanders | 5/17/2003, 12:07 am |
| Click on A&R for MINIMAX Combo Machine Review *NM* | 5/16/2003, 11:43 pm |
| need burl cabinet knobs | 5/16/2003, 11:35 pm |
| Inserts for weed pot | 5/16/2003, 9:22 pm |
| finishing with lacquer & sanding sealer | 5/16/2003, 8:53 pm |
| HELP! Foot busting out... | 5/16/2003, 5:37 pm |
| Need info on ripping chain. | 5/16/2003, 3:33 pm |
| Gilt Varnish washcoat? | 5/16/2003, 11:50 am |
| Old/New Bandsaw...I do OK? | 5/16/2003, 11:04 am |
| Sightings | 5/16/2003, 8:27 am |
| ADMIN! *** COMMERCIAL POSTS AND LINKS *** | 5/16/2003, 3:36 am |
| GI Mortiser Review posted on Articles&Review Board *NM* | 5/16/2003, 2:11 am |
| Olive Wood | 5/15/2003, 11:20 pm |
| Opinions on Angle drills for sanding | 5/15/2003, 10:08 pm |
| Appreciation | 5/15/2003, 9:31 pm |
| just resetting identity *NM* | 5/15/2003, 6:34 pm |
| Nova chucks | 5/15/2003, 6:31 pm |
| First segmented bowl. *PIC* | 5/15/2003, 1:09 am |
| test *NM* *PIC* | 5/15/2003, 12:36 am |
| hand sharpen | 5/14/2003, 9:08 pm |
| Removing a spindle from a general 160 | 5/14/2003, 2:27 pm |
| "Witch's Brew" Finish Question | 5/14/2003, 10:30 am |
| Vacuum Pump Setup *LINK* | 5/14/2003, 10:01 am |
| Got Digital...Now What? | 5/14/2003, 3:01 am |
| Chainsaw Sharpening | 5/13/2003, 9:50 pm |
| Another new turning article | 5/13/2003, 8:15 pm |
| Calling all modifiers, upgraders, and machinest! | 5/13/2003, 8:08 pm |
| NOTICE: 3 Excellent New Articles Published | 5/13/2003, 6:02 pm |
| Tips, Tricks & Jigs | 5/13/2003, 6:01 pm |
| lathe for chair legs | 5/13/2003, 5:11 pm |
| What's in a HF Chisel set | 5/13/2003, 3:47 pm |
| Which grinder for a turning beginner | 5/13/2003, 3:42 pm |
| If you could only have one... | 5/13/2003, 11:32 am |
| Could comebody give a brief | 5/13/2003, 10:27 am |
| Another mystery wood... | 5/13/2003, 6:11 am |
| Sandpaper grit embeding in turnings | 5/13/2003, 2:55 am |
| Source for a tall banjo? | 5/13/2003, 1:06 am |
| sharpening jigs | 5/12/2003, 9:41 pm |
| Craft Center Workshops *LINK* | 5/12/2003, 9:13 pm |
| Some of my Work- | 5/12/2003, 8:07 pm |
| Gloat | 5/12/2003, 7:12 pm |
| In Preperation for Wed. Chat *PIC* | 5/12/2003, 6:57 pm |
| Jargon?? | 5/12/2003, 5:49 pm |
| Doing a Demo in NY | 5/12/2003, 12:34 pm |
| A trio of bowls - PICS | 5/12/2003, 7:48 am |
| Aniline Dye | 5/11/2003, 11:34 pm |
| ???Soldering Question??? | 5/11/2003, 9:33 pm |
| Lethargic variable speed | 5/11/2003, 6:35 pm |
| Help with Spalted maple | 5/11/2003, 9:12 am |
| Happy Mothers Day | 5/11/2003, 9:08 am |
| Provo Instant Gallery photos *LINK* *PIC* | 5/11/2003, 2:20 am |
| Vacuum Chuck | 5/11/2003, 1:19 am |
| Looking for a Place to Learn | 5/10/2003, 9:30 pm |
| Oak bowl... *PIC* | 5/10/2003, 7:26 pm |
| John Cotten if you have---- | 5/10/2003, 7:25 pm |
| a trip for free wood (long) | 5/10/2003, 6:40 pm |
| cold feet | 5/10/2003, 12:19 pm |
| A little hollow thing... | 5/10/2003, 11:57 am |
| Nova weight | 5/10/2003, 9:21 am |
| Where's Larry Hancock?????? | 5/9/2003, 10:13 pm |
| I just did a boo-boo (ouch)... | 5/9/2003, 8:56 pm |
| Got the Delta up and running..... | 5/9/2003, 8:11 pm |
| Cole Jaws and Jet Mini | 5/9/2003, 4:32 pm |
| Joel's Day Off...Gloat! | 5/9/2003, 8:47 am |
| Tool Gloat | 5/9/2003, 8:11 am |
| How Y'all Doin'? | 5/9/2003, 7:49 am |
| Nova 3000 Bearings revisited | 5/9/2003, 3:02 am |
| Am I mistaken.... | 5/9/2003, 2:33 am |
| Nova 3000 Breakage | 5/8/2003, 10:14 pm |
| Turning chisel set( Help) | 5/8/2003, 9:26 pm |
| Anchor seal phone # | 5/8/2003, 8:40 pm |
| powermatic model 45 VS?s | 5/8/2003, 7:45 pm |
| If you find a crack during rough out | 5/8/2003, 6:14 pm |
| Boring 5/8" Hole in Turned Spindle | 5/8/2003, 5:02 pm |
| If you see Terry Daniels... | 5/8/2003, 3:21 pm |
| Scrapers | 5/8/2003, 2:37 pm |
| Free wood | 5/8/2003, 11:11 am |
| Heavy and wet - and another brew | 5/8/2003, 8:44 am |
| Black Locust | 5/8/2003, 7:04 am |
| Lathe Runout? | 5/8/2003, 6:59 am |
| turning tools | 5/8/2003, 1:32 am |
| Promised links *LINK* | 5/7/2003, 10:15 pm |
| Tonight's Turning Topic 5/7/03 *LINK* | 5/7/2003, 9:03 pm |
| What do you do with a dancing lathe? | 5/7/2003, 2:41 pm |
| Shop Lighting | 5/7/2003, 1:36 pm |
| Vacuum Chuck Adapter | 5/7/2003, 8:55 am |
| The Long Awaited Jet 1642 Arrival *LINK* | 5/7/2003, 8:09 am |
| In Memory of Phil Wall (3/22/35 ~ 2/21/03) | 5/7/2003, 7:55 am |
| Nova 3000 bearings | 5/7/2003, 2:29 am |
| lathe | 5/6/2003, 11:09 pm |
| Have Scroll Chuck, Have Que. | 5/6/2003, 9:46 pm |
| What's your fancy, solid or segmented? | 5/6/2003, 6:28 pm |
| New Nova Owners Group *LINK* | 5/6/2003, 2:03 pm |
| AAW Forum *LINK* | 5/6/2003, 12:49 pm |
| BYU Turning Symposium | 5/6/2003, 12:09 pm |
| Cheap Vacuum Pump *LINK* *PIC* | 5/6/2003, 8:09 am |
| Cheap Lathe | 5/6/2003, 12:01 am |
| Need Comments on Idea... | 5/5/2003, 10:04 pm |
| FREE WOOD!! | 5/5/2003, 9:54 pm |
| Lathe Center - technical question | 5/5/2003, 4:17 pm |
| Turning lignum vitae | 5/5/2003, 9:01 am |
| Adjusting spindle in chuck | 5/5/2003, 6:50 am |
| Midi lathe duplicator | 5/5/2003, 1:33 am |
| Glaser QuickChange Gouge System | 5/4/2003, 7:32 pm |
| An old, new, lathe | 5/4/2003, 4:45 pm |
| 20" Segmented Salad Bowl *PIC* | 5/4/2003, 2:25 pm |
| Bowl Gouge deal... *LINK* | 5/4/2003, 2:10 pm |
| Jet Mini Stand | 5/3/2003, 1:56 pm |
| Grinding wheels, vibration and bouncing gouges.... | 5/3/2003, 10:06 am |
| Anyone have a log of hollowing tool chat? | 5/3/2003, 7:32 am |
| Function of mineral spirits | 5/3/2003, 2:38 am |
| Live Center Adapter? | 5/3/2003, 2:29 am |
| Help Finding Drying Method | 5/2/2003, 10:15 pm |
| Spindle gouge question. | 5/2/2003, 8:07 pm |
| shear angle | 5/2/2003, 4:37 pm |
| Segmented Turning Book *LINK* | 5/2/2003, 11:08 am |
| Fingernail grind, OK! *LINK* *PIC* | 5/2/2003, 9:35 am |
| Utah Woodturning Symposium | 5/2/2003, 8:07 am |
| 2 Wood Questions | 5/2/2003, 12:07 am |
| Quoting the robot from Lost in Space... | 5/1/2003, 9:20 pm |
| Bloodwood | 5/1/2003, 4:09 pm |
| Some (probably basic) turning questions. | 5/1/2003, 3:34 pm |
| Turning Finish *LINK* | 5/1/2003, 1:38 pm |
| Easy wipe-on finish | 5/1/2003, 12:01 pm |
| Tears & Opportunity for Wood | 5/1/2003, 11:49 am |
| Salad bowl finished washed right off! | 5/1/2003, 10:03 am |
| Russ's Corner *LINK* | 5/1/2003, 9:38 am |
| Chuck questions | 5/1/2003, 9:06 am |
| 13.5x2 blank | 5/1/2003, 8:48 am |
| tool stand *PIC* | 5/1/2003, 1:27 am |
| Sudol Boring bar *PIC* | 4/30/2003, 11:15 pm |
| Fingernail grind *LINK* *PIC* | 4/30/2003, 7:55 pm |
| Conver Lathe questions | 4/30/2003, 7:34 pm |
| Topic for 4/30/03 *LINK* | 4/30/2003, 7:32 pm |
| Turning Topic Tonight?????? | 4/30/2003, 7:16 pm |
| Hey Wally Dickerman-- | 4/30/2003, 3:43 pm |
| Centering with a Vacuum chuck | 4/30/2003, 2:37 pm |
| Drill Lathe | 4/30/2003, 12:32 pm |
| New Segmented Bowl / Pics | 4/30/2003, 9:36 am |
| Hey. John Cottton, Finish.... | 4/30/2003, 12:10 am |
| Outboard turning | 4/30/2003, 12:09 am |
| More Beeswax | 4/29/2003, 11:58 pm |
| Turner ID | 4/29/2003, 11:31 pm |
| Vacuum Chuck | 4/29/2003, 11:02 pm |
| Gloat! Gloat! Gloat! Gloat! | 4/29/2003, 10:48 pm |
| Chain Saw Safety Thread | 4/29/2003, 10:39 pm |
| Help on Wood...Ouick!!!... | 4/29/2003, 9:43 pm |
| Deft lacqure | 4/29/2003, 8:23 pm |
| Bridgewood model MC-616 | 4/29/2003, 7:10 pm |
| Locust, any good? | 4/29/2003, 2:03 pm |
| wood question | 4/29/2003, 11:51 am |
| Can these be saved? | 4/29/2003, 10:58 am |
| An update, a turner in bliss, and the SSS - long | 4/29/2003, 10:09 am |
| Chain saw safety question? | 4/29/2003, 1:06 am |
| Beeswax..... *LINK* | 4/28/2003, 11:35 pm |
| glue for glue blocks on green wood | 4/28/2003, 9:54 pm |
| Chainsaw troubleshooting | 4/28/2003, 8:49 pm |
| Gloat [Kinda] | 4/28/2003, 6:00 pm |
| Demonstrators | 4/28/2003, 4:26 pm |
| Mini Hollowing Tools Que. | 4/28/2003, 1:44 pm |
| PEG 1500 sources | 4/28/2003, 12:05 pm |
| Russ & Beeswax | 4/28/2003, 11:49 am |
| Power Sanding - Paper | 4/28/2003, 11:02 am |
| My New Grinder ;-) *PIC* | 4/28/2003, 8:17 am |
| Playing with a new finish... sort of.. | 4/28/2003, 7:57 am |
| Poulan chain saws? How you like them? | 4/27/2003, 11:51 pm |
| Aha! *PIC* | 4/27/2003, 11:45 pm |
| waste blocks | 4/27/2003, 10:14 pm |
| Highland Hardware/Atlanta Get together?? | 4/27/2003, 7:36 pm |
| Finishing Peppermills | 4/27/2003, 6:45 pm |
| Soap Soak Question | 4/27/2003, 6:19 pm |
| Jet 12 /36 noise | 4/27/2003, 6:14 pm |
| For bowl rouging out are there any | 4/27/2003, 3:36 pm |
| Food-safe Myths & Truths *LINK* | 4/27/2003, 3:13 pm |
| Russ's Corner | 4/27/2003, 3:35 am |
| dumb question of the week | 4/27/2003, 12:19 am |
| 2 smal tool rests *PIC* | 4/26/2003, 11:56 pm |
| Osage orange for turning? | 4/26/2003, 11:28 pm |
| grizzly chucks | 4/26/2003, 10:15 pm |
| home made curved tool rest | 4/26/2003, 8:26 pm |
| Local Wood Turners | 4/26/2003, 7:27 pm |
| Need product advice....... | 4/26/2003, 3:48 pm |
| What to do with a piece of walnut? | 4/26/2003, 8:33 am |
| Chainsaw chain question *PIC* | 4/26/2003, 8:31 am |
| Lacquer | 4/26/2003, 2:05 am |
| Stubby lathe | 4/25/2003, 9:49 pm |
| first lathe *LINK* | 4/25/2003, 8:04 pm |
| pruning seal | 4/25/2003, 7:58 pm |
| lost cookie? | 4/25/2003, 6:56 pm |
| "Next" Lathe Quest | 4/25/2003, 11:49 am |
| Sears/Dunlap Model 534.0601 Lathe Manual? | 4/25/2003, 10:34 am |
| Felled Tree *LINK* | 4/25/2003, 6:54 am |
| Bark | 4/24/2003, 9:55 pm |
| Outboard tool rest | 4/24/2003, 9:54 pm |
| Wood Gloat: Beautiful Burls | 4/24/2003, 8:52 pm |
| Got the old Delta bolted down | 4/24/2003, 6:36 pm |
| Five Barns Picnic Announcement! | 4/24/2003, 6:35 pm |
| It all started with... | 4/24/2003, 4:10 pm |
| Pen Mill Speed?? | 4/24/2003, 1:16 pm |
| Walnut salad bowl | 4/24/2003, 12:52 pm |
| Step Pully Issue In Last Night's Chat | 4/24/2003, 11:54 am |
| Back up and running | 4/24/2003, 11:37 am |
| Trouble w/WC Links? | 4/24/2003, 10:39 am |
| A Little Apple Vase | 4/24/2003, 12:42 am |
| Anybody else having trouble with the chat room? | 4/23/2003, 9:42 pm |
| A visit with the old lathe ... glad to be home! | 4/23/2003, 6:36 pm |
| Turning Topic for 4/23 | 4/23/2003, 6:31 pm |
| Chat Room tonight? Subject? *NM* | 4/23/2003, 3:31 pm |
| Your Favorite "Witches Brew" Finish? *LINK* *PIC* | 4/23/2003, 1:44 pm |
| Another Hollow form ? | 4/23/2003, 10:37 am |
| True Grit | 4/23/2003, 8:47 am |
| Hollow Form Question? | 4/22/2003, 11:22 pm |
| glue @ double side tape | 4/22/2003, 9:51 pm |
| How to Finish Yellow Cedar Burl w PIC | 4/22/2003, 7:38 pm |
| Poor Mans Bowl Scraper *PIC* | 4/22/2003, 3:59 pm |
| Question for Vacuum Chuck Users | 4/22/2003, 1:34 pm |
| Need help with small shop space | 4/22/2003, 12:28 pm |
| With all the reports of injuries, how about a list | 4/22/2003, 10:29 am |
| Circular Steady Rest | 4/22/2003, 7:36 am |
| Sanding Part 1 (very long) | 4/22/2003, 1:24 am |
| Big, New, Domed Scraper & ??? about Plumwood *LINK* | 4/22/2003, 1:09 am |
| Scorpion Hollowing Tool Review | 4/22/2003, 12:59 am |
| Which turning toos do you use for small projects | 4/21/2003, 5:51 pm |
| Ship Augers | 4/21/2003, 12:54 pm |
| sharpening mini tools | 4/21/2003, 12:25 pm |
| Tearout | 4/21/2003, 11:54 am |
| HER'S A SIMPLE VACUMM CHCK! *PIC* | 4/20/2003, 8:11 pm |
| weekend projects complete *PIC* | 4/20/2003, 7:51 pm |
| "Improved" Wolverine-style Jig w PIC | 4/20/2003, 12:31 pm |
| Bowl Blank ChainSaw Stand *LINK* | 4/19/2003, 9:06 pm |
| Rowen | 4/19/2003, 8:42 pm |
| Hooked a big one | 4/19/2003, 7:01 pm |
| Which type bits do you like to use for boring | 4/19/2003, 1:48 pm |
| Holding Hollowforms | 4/19/2003, 7:42 am |
| Can Anchorseal be reconstituted? | 4/19/2003, 3:31 am |
| E-mail | 4/19/2003, 12:43 am |
| Serious lathe info | 4/19/2003, 12:36 am |
| I'm a bonehead | 4/18/2003, 7:03 pm |
| Woodcraft toolrest | 4/18/2003, 6:30 pm |
| Wood Turning in Utah? *LINK* | 4/18/2003, 4:09 pm |
| Jet 1642 and AM interference | 4/18/2003, 4:04 pm |
| Need new sighting pics. | 4/18/2003, 11:31 am |
| Cookie, Ellis........ | 4/18/2003, 1:19 am |
| Tough to finish | 4/18/2003, 12:20 am |
| To Garrettin Victoria BC | 4/17/2003, 10:10 pm |
| BWT Tool Rests | 4/17/2003, 9:51 pm |
| Bowl Skew? | 4/17/2003, 9:36 pm |
| Can somebody tell me the steps to making a pepper | 4/17/2003, 6:18 pm |
| Turning, Teaching, and Touring | 4/17/2003, 10:34 am |
| Pond Picnic Reflections | 4/17/2003, 10:30 am |
| Turning Classes | 4/17/2003, 8:47 am |
| Turning Wounds | 4/17/2003, 12:58 am |
| web site | 4/16/2003, 8:52 pm |
| Valuation Help | 4/16/2003, 8:20 pm |
| self ctr chuck for midi lathe | 4/16/2003, 7:08 pm |
| New scraper | 4/16/2003, 6:30 pm |
| Tools | 4/16/2003, 4:02 pm |
| Poulan Pro 295 update | 4/16/2003, 10:41 am |
| I used my drill press chuck in my lathe and saved | 4/15/2003, 11:23 pm |
| Contact cement shelf life | 4/15/2003, 10:42 pm |
| Woodcut Tru-Grind *LINK* | 4/15/2003, 10:37 pm |
| Copying Duplication Fingers | 4/15/2003, 9:23 pm |
| Turning Topic for 4 /16 /03 *LINK* | 4/15/2003, 6:52 pm |
| Sharpening Turning Tools | 4/15/2003, 6:46 pm |
| Grinder for turning tools | 4/15/2003, 1:10 pm |
| Wood Identification | 4/14/2003, 6:50 pm |
| Door Knobs | 4/14/2003, 4:28 pm |
| how to cut it (with pics) | 4/14/2003, 1:49 pm |
| Bowl Scrapers | 4/14/2003, 7:02 am |
| Nova DVR | 4/14/2003, 3:34 am |
| Inspiration *LINK* | 4/13/2003, 10:01 pm |
| What attracts. And doesn't. | 4/13/2003, 12:10 pm |
| What would you do with 6" cherry branches? | 4/13/2003, 11:46 am |
| Result | 4/12/2003, 10:18 pm |
| Thin spindle turning *PIC* | 4/12/2003, 6:50 pm |
| PM 3520a shipping cost | 4/12/2003, 9:53 am |
| Sanding | 4/12/2003, 8:22 am |
| For turning bottle stoppers, | 4/11/2003, 10:10 pm |
| Penetrating finish for Norfok Pine | 4/11/2003, 8:22 pm |
| A couple of interesting woods | 4/11/2003, 8:07 pm |
| Setting up Wolverine Bases | 4/11/2003, 6:32 pm |
| Newbie Help-- needed sharpening Glaser Bowl Gouge | 4/11/2003, 5:41 pm |
| Poulan Pro 295 | 4/11/2003, 1:26 pm |
| Rusting Chucks and Centers | 4/11/2003, 8:37 am |
| Respirators | 4/11/2003, 8:13 am |
| Respirator Article | 4/10/2003, 2:16 pm |
| Vac question | 4/10/2003, 1:25 pm |
| HF shapes and drying ques. | 4/10/2003, 12:39 pm |
| Anybody know of Gary Davis selling turning blanks? | 4/10/2003, 11:24 am |
| Sightings... | 4/10/2003, 10:11 am |
| OK, I give up. | 4/10/2003, 9:18 am |
| Water Oak and Willow Oak | 4/10/2003, 8:47 am |
| lathe plans | 4/10/2003, 3:23 am |
| Oneway 1640 prices *LINK* | 4/9/2003, 11:38 pm |
| 3M Airstream Respirator | 4/9/2003, 9:32 pm |
| Thank You | 4/9/2003, 9:11 pm |
| VL 100 MOTOR | 4/9/2003, 6:39 pm |
| Further considerations on facets of WT Art | 4/9/2003, 4:07 pm |
| Bowl or Hollow Vessel? | 4/9/2003, 2:03 pm |
| May 9-10 4th New England Woodturning Symposium | 4/9/2003, 11:39 am |
| question about purpleheart?? | 4/8/2003, 11:31 pm |
| Hollow turning calipers | 4/8/2003, 11:27 pm |
| OH BOy - New toys - Oneway Handle | 4/8/2003, 3:40 pm |
| Ideas/help | 4/8/2003, 2:05 pm |
| Turning Tenons? | 4/8/2003, 1:47 pm |
| Photographing Your Work | 4/8/2003, 9:38 am |
| Wednesday Chat | 4/8/2003, 4:29 am |
| Mobile Bases | 4/8/2003, 1:55 am |
| Ebay Bowl Blanks | 4/7/2003, 11:10 am |
| What is Gainesville, GA Symp.? *NM* | 4/7/2003, 9:56 am |
| screw chuck questions | 4/7/2003, 8:16 am |
| foam backed sanding disks | 4/7/2003, 8:00 am |
| CrystaLac Grain Filler | 4/7/2003, 12:20 am |
| portuguese laurel | 4/6/2003, 2:51 pm |
| Cheapsaket Faceplates Cont'd w PICS | 4/6/2003, 2:42 pm |
| Home Made Lathe | 4/6/2003, 12:14 pm |
| New Segmented Bowl *PIC* | 4/6/2003, 12:13 pm |
| How to prevent cross grain tearout? | 4/6/2003, 11:45 am |
| Art Liestman Workshop, Sat April 12 Burlington, ON *LINK* | 4/6/2003, 11:16 am |
| Probably a Controversial Question. | 4/6/2003, 7:02 am |
| Gainesvill GA Symposium | 4/6/2003, 6:51 am |
| Three Facets of Woodturned Art: An incomplete cons | 4/6/2003, 3:59 am |
| lathe addapter | 4/5/2003, 8:42 pm |
| ferules | 4/5/2003, 8:30 pm |
| New 3520 | 4/5/2003, 10:29 am |
| Oneway 1640 | 4/5/2003, 9:24 am |
| Stopping cracks in turning stock? | 4/4/2003, 10:46 pm |
| PM 3520A | 4/4/2003, 8:54 pm |
| Just a Change in Design. | 4/4/2003, 3:54 pm |
| Search feature again | 4/4/2003, 12:33 pm |
| Early B-Day Greetings... | 4/4/2003, 11:06 am |
| My today's subject - Parting tools - Your Opinions | 4/4/2003, 9:40 am |
| Boring Bar Steel - Quality Question | 4/4/2003, 8:36 am |
| PM 3520 | 4/3/2003, 10:22 pm |
| WOW sign up *LINK* | 4/3/2003, 10:16 pm |
| Pen Kit recommendations | 4/3/2003, 7:44 pm |
| Drive Belt Tension | 4/3/2003, 6:20 pm |
| Search | 4/3/2003, 11:47 am |
| Setting up new shop/ buying equipment | 4/3/2003, 11:46 am |
| drilling hole in files?? | 4/3/2003, 10:54 am |
| Great thread going on at WOW | 4/3/2003, 7:46 am |
| Where can you get Black Veneer | 4/2/2003, 9:44 pm |
| 2 questions | 4/2/2003, 6:48 pm |
| Will a Tru-Grind sharpening system fit onto the To | 4/2/2003, 6:05 pm |
| Besides this board what are your | 4/2/2003, 4:29 pm |
| Has anybody purchased from.... | 4/2/2003, 12:34 pm |
| Power Sanding - New Option *LINK* | 4/2/2003, 9:50 am |
| Hollow forms | 4/2/2003, 9:31 am |
| Drilling tool handles? | 4/2/2003, 9:29 am |
| Removing Burl From Tree | 4/2/2003, 8:36 am |
| April 2, 03 Turning Topic *LINK* | 4/2/2003, 8:25 am |
| special turninings at WOW | 4/2/2003, 1:07 am |
| Cheapskate Faceplate Idea | 4/1/2003, 11:35 pm |
| Southern States Symposium III *LINK* | 4/1/2003, 10:21 pm |
| Nova Mercury Users? | 4/1/2003, 8:10 pm |
| Review of New CSUSA Pen Kit w/PICS | 4/1/2003, 3:03 pm |
| Gary Hern | 4/1/2003, 12:08 pm |
| Stewart vs Sorby Hollower | 4/1/2003, 11:16 am |
| Scorpion Hollowing Sys? | 4/1/2003, 10:57 am |
| Segmented Bowl w/ PIC *PIC* | 4/1/2003, 9:48 am |
| The search continues | 4/1/2003, 8:07 am |
| Question re: setting up new shop | 4/1/2003, 6:59 am |
| PM3520A ? | 4/1/2003, 1:36 am |
| Is there a best angle to grind a fingernail | 4/1/2003, 12:08 am |
| Lidded box how to | 3/31/2003, 8:49 pm |
| Creative Woodturning showcase *LINK* | 3/31/2003, 5:26 pm |
| Chainsaw problems. | 3/31/2003, 4:40 pm |
| Dirt-cheap chuck (link) and question *LINK* | 3/31/2003, 4:22 pm |
| Oneway Bowl Steady | 3/31/2003, 3:21 pm |
| Golden Rain Tree? | 3/31/2003, 3:21 pm |
| Sanding Maple pens...? | 3/31/2003, 12:21 pm |
| Drilling holes on the lathe? | 3/31/2003, 11:27 am |
| Thanks Lyn | 3/31/2003, 10:09 am |
| Humbled-long | 3/31/2003, 9:27 am |
| Checks in walnut | 3/31/2003, 8:40 am |
| Spray Finishing Bowls | 3/31/2003, 8:36 am |
| Basic chainsaw maintenance guide? | 3/31/2003, 7:44 am |
| Power Visor | 3/31/2003, 2:28 am |
| turning get togethers | 3/30/2003, 5:34 pm |
| The Inside or the Outside? | 3/30/2003, 3:57 pm |
| chucks | 3/30/2003, 3:21 pm |
| PM 3520A | 3/30/2003, 1:04 pm |
| A shop in the future...! | 3/30/2003, 12:58 pm |
| Bowl savers | 3/30/2003, 9:22 am |
| Less aggressive bowl gouge | 3/30/2003, 8:23 am |
| Wind Shakes | 3/29/2003, 9:53 pm |
| Lessons in Lilac | 3/29/2003, 5:06 pm |
| Pocket Watch article, and request... *LINK* | 3/29/2003, 12:43 pm |
| Tool set-up for the Kelton hollowing rig *LINK* | 3/29/2003, 7:27 am |
| Can somebody help me out with catches | 3/29/2003, 12:35 am |
| Grizzly mini??? | 3/28/2003, 11:30 pm |
| Wolverine Universal Grinding Jig and Ellsworth Gr. | 3/28/2003, 10:47 pm |
| Chainsaws (Moderately Long) | 3/28/2003, 12:29 pm |
| Jet Mini | 3/28/2003, 12:29 pm |
| Munroe Hollowing Tool *LINK* | 3/28/2003, 11:13 am |
| Those coming to Anderson in April..... | 3/28/2003, 9:23 am |
| Bowls, pens and playing with inlay, PICS | 3/28/2003, 7:46 am |
| Glaser Bowl gouges | 3/28/2003, 12:04 am |
| Some thoughts on speed | 3/27/2003, 11:37 pm |
| ? 4 green bowl soap soakers | 3/27/2003, 10:19 pm |
| 1 1/4 x 8 nuts with washers | 3/27/2003, 8:54 pm |
| Pros and Cons | 3/27/2003, 7:03 pm |
| Hamlet ASP2060 Bowl Gouges *LINK* | 3/27/2003, 5:48 pm |
| Goal: Translucent pine... | 3/26/2003, 11:57 pm |
| Two new pens | 3/26/2003, 11:50 pm |
| Bowl Lathe *PIC* | 3/26/2003, 11:08 pm |
| lathe parts | 3/26/2003, 8:20 pm |
| chuck recommendation | 3/26/2003, 7:24 pm |
| Face Plates? | 3/26/2003, 5:11 pm |
| Oneway gloof-ups *LINK* | 3/26/2003, 3:54 pm |
| Centering A Bowl | 3/26/2003, 11:50 am |
| When microwaving a bowl what's a good way | 3/26/2003, 10:07 am |
| Micro-Tools | 3/26/2003, 10:03 am |
| Getting started in pen turning?? | 3/26/2003, 9:58 am |
| Turning Topic 3/23/03 Open Chat *LINK* | 3/26/2003, 9:38 am |
| Sealing Wood | 3/26/2003, 12:56 am |
| Dane, Pls check your e-mail *NM* | 3/26/2003, 12:00 am |
| Thought I did somethin... | 3/25/2003, 11:04 pm |
| Turn a pen from green wood? | 3/25/2003, 11:02 pm |
| Jet Lathe ballast box and trestle legs | 3/25/2003, 9:25 pm |
| getting started | 3/25/2003, 6:10 pm |
| Segmented Turning - Veneers | 3/25/2003, 2:42 pm |
| pen making | 3/25/2003, 2:36 pm |
| Older Messages | 3/25/2003, 9:37 am |
| Not OT--Growing older means you know more experts! | 3/25/2003, 3:57 am |
| Munro Hollower rev. very long | 3/25/2003, 2:20 am |
| Retrospect, bowl sold... 2 | 3/24/2003, 10:39 pm |
| Lathe Tool Holders *PIC* | 3/24/2003, 3:11 pm |
| Sharpening Hollowing tools? | 3/24/2003, 2:47 pm |
| I have WebSite!! *LINK* | 3/24/2003, 2:19 pm |
| Lidded box | 3/24/2003, 10:36 am |
| How long is too long... | 3/24/2003, 9:05 am |
| Ellsworth Gouge and Tormek | 3/24/2003, 8:42 am |
| No military logos for pens | 3/24/2003, 2:16 am |
| Pen finish experiments update | 3/24/2003, 1:08 am |
| Serious Lathes *LINK* *PIC* | 3/23/2003, 10:19 pm |
| "Bouncy" grinding wheel | 3/23/2003, 10:02 pm |
| Epoxy? | 3/23/2003, 2:46 pm |
| Wood Allergies *LINK* | 3/23/2003, 11:50 am |
| Veritas scraper burnisher | 3/23/2003, 10:46 am |
| Kelton Mini Hollowers | 3/23/2003, 7:18 am |
| More on pen finish | 3/23/2003, 3:39 am |
| Pen making questions | 3/23/2003, 3:26 am |
| Opinions on temporary mini lathe | 3/23/2003, 3:08 am |
| Read Faceplate System? *LINK* | 3/22/2003, 7:33 pm |
| Home made pen lathe | 3/22/2003, 12:43 pm |
| Using Drill rod for hollowing tips | 3/22/2003, 9:49 am |
| McNaughton Tool Original Style Gate Question | 3/22/2003, 12:41 am |
| WoodCentral Articles & Reviews Section | 3/21/2003, 11:22 pm |
| Serious Lathe | 3/21/2003, 10:29 pm |
| Bill Grumbine - VL100 | 3/21/2003, 8:39 pm |
| Ellsworth grinding jig | 3/21/2003, 6:34 pm |
| How would you finish some pine bowls | 3/21/2003, 1:28 pm |
| Advise re Delta lathe..... | 3/21/2003, 1:13 pm |
| Morse Tapers - How do I clean inside and outside | 3/21/2003, 10:42 am |
| The skew...or (LONG) | 3/21/2003, 10:41 am |
| Good Deal on Delta 46-715 | 3/21/2003, 8:47 am |
| Tips for using the Proforme Hollowers-Long | 3/20/2003, 8:03 pm |
| Are there any tips for getting an out of round | 3/20/2003, 2:02 pm |
| tool coating removal question | 3/20/2003, 1:08 pm |
| Fogged Coating on Glasses | 3/20/2003, 10:38 am |
| Be careful with CA while making pens! | 3/20/2003, 2:17 am |
| Calling all pen makers | 3/19/2003, 9:34 pm |
| Henry Taylor or Sorby? | 3/19/2003, 1:52 pm |
| Vacuum Chuck | 3/19/2003, 12:12 pm |
| Live Center Sets | 3/19/2003, 10:30 am |
| deep hollowing tool | 3/19/2003, 8:38 am |
| The finest woodworking day ever! | 3/19/2003, 12:42 am |
| WEd Turning Chat, Storms... *LINK* | 3/18/2003, 10:00 pm |
| Nova Mercury?? | 3/18/2003, 6:49 pm |
| Question for Lyn J. Mangiameli | 3/18/2003, 3:46 pm |
| All Turners & Friends - Thank You! | 3/18/2003, 12:03 pm |
| Still trying to decide whether to carve or to turn *LINK* | 3/17/2003, 8:41 pm |
| Segmented Project Planner *LINK* | 3/17/2003, 6:49 pm |
| Osolnik Tools *PIC* | 3/17/2003, 4:43 pm |
| Chucks | 3/17/2003, 4:08 pm |
| new guy questions? | 3/17/2003, 3:31 pm |
| For a beginner on the lathe, what do you miss when | 3/17/2003, 1:33 pm |
| It's supposed to be like bicycling, right? | 3/17/2003, 1:17 pm |
| Coring Tool Demo (PICS) | 3/17/2003, 12:41 pm |
| Hey Bill Grumbine... | 3/17/2003, 7:53 am |
| Beginning lathe | 3/17/2003, 6:49 am |
| ? about thinned glue for stabilizing. | 3/17/2003, 12:57 am |
| Turning Tool Holder | 3/16/2003, 8:07 pm |
| Turning Chat for 3/19 *LINK* | 3/16/2003, 7:43 pm |
| Oak Tannins And Turning Tools | 3/16/2003, 6:26 pm |
| Wood identified! | 3/16/2003, 11:30 am |
| Contribute To WC! | 3/15/2003, 9:30 pm |
| Lathe decision - long | 3/15/2003, 5:19 pm |
| Speaking of Face Shield | 3/15/2003, 6:50 am |
| VSJM Project, Redeaux | 3/14/2003, 7:02 pm |
| Another reason to ALWAYS were a face shield *PIC* | 3/14/2003, 5:34 pm |
| Oops, I'm drooling... | 3/14/2003, 2:43 pm |
| What do you use your tail stock chuck | 3/14/2003, 9:43 am |
| Rescued Bowl - Pic 1 *PIC* | 3/14/2003, 9:39 am |
| Coring Systems Survey | 3/14/2003, 9:12 am |
| Lost Website | 3/13/2003, 11:36 pm |
| It's spalted!!!!! *PICS* | 3/13/2003, 11:27 pm |
| What's a good trick for tightening a jam chuck | 3/13/2003, 10:37 pm |
| 3" face plate | 3/13/2003, 9:21 pm |
| Happy Birthday! Larry Hancock *NM* | 3/13/2003, 8:34 pm |
| Huisache??? | 3/13/2003, 6:37 pm |
| Ornamental Turning | 3/13/2003, 6:32 pm |
| Del Stubbs? | 3/13/2003, 4:29 pm |
| CA source... | 3/13/2003, 4:24 pm |
| Re: Work clothes | 3/13/2003, 2:34 pm |
| Turning Link *LINK* | 3/13/2003, 12:39 pm |
| WARNING!!! Anti-Freeze is Poisonous | 3/13/2003, 12:29 pm |
| Mounting 3/4" recess | 3/13/2003, 11:21 am |
| Mullberry? | 3/13/2003, 10:39 am |
| Problem turning Ash | 3/13/2003, 7:12 am |
| Drying Green Bowls | 3/13/2003, 3:04 am |
| For the want of a video camera | 3/12/2003, 9:49 pm |
| Hollow Christmas Orniments | 3/12/2003, 7:39 pm |
| First Rimmed Bowl - Wally where were you? Pics | 3/12/2003, 7:37 pm |
| Motor | 3/12/2003, 4:48 pm |
| Veneer Source for segmented work | 3/12/2003, 4:35 pm |
| Nova Chuck | 3/12/2003, 3:59 pm |
| Turning Pepper Tree | 3/12/2003, 1:30 pm |
| Symbols ... | 3/12/2003, 11:07 am |
| Russ... | 3/12/2003, 9:09 am |
| Willard Baxter Update | 3/12/2003, 8:26 am |
| Boileding again | 3/12/2003, 6:42 am |
| I hate braking a nearly finished Bowl | 3/11/2003, 11:10 pm |
| Nova DVR Disapointment | 3/11/2003, 7:37 pm |
| Hollowing- Lathe and tool limitations | 3/11/2003, 2:59 pm |
| Turning website | 3/11/2003, 11:43 am |
| EVS has me thinking, a scary thing in itself | 3/11/2003, 10:24 am |
| Warped bowls and finish turning (sigh) | 3/10/2003, 11:28 pm |
| Solution for Turning Tool Storage! | 3/10/2003, 9:59 pm |
| Need some suggestions | 3/10/2003, 6:58 pm |
| New toy | 3/10/2003, 1:50 pm |
| just trying something... *PIC* | 3/10/2003, 11:31 am |
| Problem with Mercury Lathe(s) | 3/10/2003, 10:19 am |
| New Scraping and Hollowing Tools from Crown:Review | 3/10/2003, 1:49 am |
| Bowl #4 *PICS* | 3/9/2003, 11:47 pm |
| OT: Silly Question, Russ | 3/9/2003, 5:19 pm |
| Learned a lesson...or 3 | 3/9/2003, 3:39 pm |
| Willard Baxter update | 3/9/2003, 11:30 am |
| Powermatic 3520 questions | 3/9/2003, 9:35 am |
| Bowl turning attachment | 3/9/2003, 12:11 am |
| PM 3520a headstock clicking | 3/9/2003, 12:00 am |
| First visit here | 3/8/2003, 9:41 pm |
| Smelly eucalyptus? | 3/8/2003, 9:06 pm |
| Turning topic for 3/12/03 *LINK* | 3/8/2003, 7:01 pm |
| Utah Woodturning Symposium | 3/8/2003, 1:32 pm |
| Talon chuck wobble ? | 3/8/2003, 6:59 am |
| Signing work | 3/7/2003, 9:27 pm |
| back to the lathe, finally! | 3/7/2003, 7:17 pm |
| Willard baxter update | 3/7/2003, 6:13 pm |
| Segment Facing Jig *PIC* | 3/7/2003, 5:53 pm |
| powermatic lathe | 3/7/2003, 2:03 pm |
| Frozen Anchorseal | 3/7/2003, 1:23 pm |
| Turning boxes - end grain | 3/7/2003, 12:32 pm |
| ***CONSTRUCTION TODAY*** | 3/7/2003, 12:05 pm |
| Speaking of Scrapers. . . | 3/7/2003, 11:35 am |
| Thuya hollowform and a year of turning | 3/7/2003, 8:23 am |
| Walnut Olil Finish | 3/7/2003, 7:12 am |
| Should I burnish a scraper ? | 3/6/2003, 3:11 pm |
| Our Inspiration... | 3/6/2003, 1:31 pm |
| Lathe Height | 3/6/2003, 1:06 pm |
| Dick and Phil | 3/6/2003, 11:18 am |
| natural edge bowl question | 3/6/2003, 9:30 am |
| Pens and Supplies | 3/6/2003, 9:27 am |
| Gotta quite workingin the Shop! | 3/6/2003, 8:39 am |
| Tool Rest source | 3/6/2003, 3:59 am |
| Tail stock adapter *LINK* | 3/5/2003, 11:55 pm |
| Oneway vs Jacques C. ? | 3/5/2003, 10:56 pm |
| segmented bowl angle cuts | 3/5/2003, 8:32 pm |
| Turning Elm | 3/5/2003, 7:36 pm |
| How do you turn a round ball | 3/5/2003, 5:53 pm |
| Oneway responded to Mar. 1 post. Read it. | 3/5/2003, 3:51 pm |
| Batch 'o Bowls *PIC* | 3/5/2003, 3:26 pm |
| tenons. | 3/5/2003, 12:48 pm |
| Topic for 3/5/03 Vac Chucks *LINK* | 3/5/2003, 11:34 am |
| Russ in AAW Artical | 3/5/2003, 7:27 am |
| 3hp power consumption | 3/5/2003, 1:35 am |
| Nova DVR 3000 | 3/4/2003, 11:08 pm |
| AAW 2005 Symposium | 3/4/2003, 10:20 pm |
| Jet 1642EVS Lathe Review | 3/4/2003, 10:00 pm |
| Vega lathes???? | 3/4/2003, 7:28 pm |
| Lathe Purchase Decision Finale | 3/4/2003, 9:35 am |
| Delta Midi - how big of a blank? | 3/4/2003, 7:04 am |
| Oneway !640 *PIC* | 3/3/2003, 11:05 pm |
| Jet and Oneway Relationship? | 3/3/2003, 9:45 pm |
| New Vicmarc Owners Group | 3/3/2003, 9:36 pm |
| Oneway 1224 | 3/3/2003, 4:08 pm |
| turning book... | 3/3/2003, 2:21 pm |
| Nice Piece of Wood from Dom Greco *PIC* | 3/3/2003, 10:50 am |
| First attempt at hollowing | 3/2/2003, 9:39 pm |
| First ever spindle turning *PICS* | 3/2/2003, 8:21 pm |
| Avoiding the dust | 3/2/2003, 5:35 pm |
| Home made Hollowing Tool | 3/2/2003, 3:12 pm |
| Turning on the wrong side of the lathe *LINK* | 3/2/2003, 8:02 am |
| March's 'Woodturner's Showcase' added to Creative *LINK* | 3/2/2003, 7:46 am |
| bowl turning | 3/1/2003, 11:30 pm |
| Jet 16" lathe *LINK* | 3/1/2003, 10:15 pm |
| Evaluation...New Vicmarc Vac chuck *LINK* | 3/1/2003, 9:16 pm |
| Big Vicmarc impressions Part II *LINK* | 3/1/2003, 8:15 pm |
| Yes, yes, I can see the light... | 3/1/2003, 6:48 pm |
| When was the Morse taper... | 3/1/2003, 1:02 pm |
| CA accelerator | 3/1/2003, 1:40 am |
| Vicky is here!!!!! *LINK* | 2/28/2003, 8:59 pm |
| New Nova Deluxe chuck | 2/28/2003, 12:42 pm |
| Chuck question - small parts | 2/28/2003, 10:59 am |
| For sealing bowl end grain does | 2/28/2003, 9:27 am |
| March's 'Product Showcase' added to Creative Woodt *LINK* | 2/28/2003, 8:43 am |
| Problems with finishing cocobolo | 2/27/2003, 11:13 pm |
| Any opinions on Longworth chuck? | 2/27/2003, 9:44 pm |
| Big on a little lathe | 2/27/2003, 8:22 pm |
| Magnolia | 2/27/2003, 6:19 pm |
| Dismount! | 2/27/2003, 5:46 pm |
| Bought me a Mercury! | 2/27/2003, 2:23 pm |
| Took a green wood bath today! | 2/27/2003, 1:45 pm |
| Active Board | 2/27/2003, 1:03 am |
| colored box elder | 2/27/2003, 12:36 am |
| Phil Wall Memorial ??? | 2/26/2003, 9:29 pm |
| Graduate Lathe | 2/26/2003, 8:52 pm |
| Russ's Segmented Bowl | 2/26/2003, 8:26 pm |
| Segmented bowl angle cuts | 2/26/2003, 7:47 pm |
| Turning Topic for 2/26/03 *LINK* | 2/26/2003, 7:03 pm |
| Sanding questions | 2/26/2003, 6:56 pm |
| Turning Topic??? | 2/26/2003, 5:10 pm |
| New Nova faceplate rings and Cole jaws | 2/26/2003, 2:35 pm |
| Posting Problem | 2/26/2003, 2:05 pm |
| Turning suppliers | 2/26/2003, 1:18 pm |
| Here's the bowl *PIC* | 2/26/2003, 11:09 am |
| Which tools do you like for bowl | 2/26/2003, 1:21 am |
| Tool Angle Help | 2/26/2003, 12:40 am |
| CA off-gassing | 2/25/2003, 7:18 pm |
| Delta Lathe Purchase Comments Request | 2/25/2003, 5:19 pm |
| ***NOTE: Boards will be down for a short while... | 2/25/2003, 2:42 pm |
| Doing a Demo in Indiana | 2/25/2003, 1:37 pm |
| new turner - chisel question | 2/25/2003, 9:04 am |
| Turning Burl - Wall thickness? | 2/25/2003, 8:57 am |
| Big Vicmarc impressions | 2/24/2003, 10:31 pm |
| ARGH! | 2/24/2003, 10:20 pm |
| The Impact of Grain Orientation | 2/24/2003, 7:50 pm |
| Spindle Tapping | 2/24/2003, 6:53 pm |
| Ruth Wall's address? | 2/24/2003, 6:22 pm |
| How I turned the "Segmented Bowl" | 2/24/2003, 1:12 pm |
| Update Thread Tolerance | 2/24/2003, 11:46 am |
| One Beautiful Turning | 2/24/2003, 11:40 am |
| Segmented Bowl.... | 2/24/2003, 11:39 am |
| Chuck for a Jet Mini Lathe | 2/24/2003, 11:36 am |
| More About Bowl Gouges, A comparison of profiles | 2/24/2003, 11:34 am |
| Waste Block Material | 2/24/2003, 11:26 am |
| Bowl Gouges, again...... | 2/24/2003, 11:01 am |
| Bought a mini lathe | 2/23/2003, 8:40 pm |
| Wolverine-style Jig | 2/23/2003, 4:36 pm |
| Jet 1442 Lathe | 2/22/2003, 9:30 pm |
| Okay, so what's the secret? | 2/22/2003, 8:41 pm |
| Any suggestions on using a chuck on a bowl | 2/22/2003, 6:20 pm |
| antique lathe | 2/22/2003, 8:46 am |
| Turning tools for mini-lathe | 2/22/2003, 8:06 am |
| Woodturning magazines, What's available in the US | 2/22/2003, 5:49 am |
| Remember Phil... | 2/21/2003, 11:40 pm |
| Thread Tolerances | 2/21/2003, 2:46 pm |
| liability insurance wooturning | 2/21/2003, 8:00 am |
| Mahoney Video review | 2/21/2003, 12:22 am |
| Where are the chips? *NM* | 2/20/2003, 6:31 pm |
| Holly | 2/20/2003, 4:25 pm |
| Opening shot | 2/20/2003, 3:58 pm |
| Can Borax be used for soaking rough turned blanks | 2/20/2003, 1:17 pm |
| New Powermatic 3520a (installment 1 long) | 2/20/2003, 1:06 pm |
| Sunday with Wally Dickerman | 2/20/2003, 8:29 am |
| PCEPOXY----> T.D. | 2/20/2003, 8:26 am |
| tameing a skew, grinding query | 2/19/2003, 10:22 pm |
| Sliding lathe. How do you keep you lathe | 2/19/2003, 5:54 pm |
| Chat tonight! NO MORE POP-UPS! | 2/19/2003, 4:15 pm |
| Natural edges | 2/19/2003, 1:20 pm |
| A Sanding question?? | 2/19/2003, 12:53 pm |
| Turning Topic for 2/19/03 | 2/19/2003, 11:34 am |
| Two piece Hollow vesel *PIC* | 2/19/2003, 12:15 am |
| Announcement! Penturners Rendezvous! | 2/18/2003, 11:13 pm |
| Hollowing a Flat Vessel With a Small Opening | 2/18/2003, 8:39 pm |
| Sharpening Lathe Tools | 2/18/2003, 6:47 pm |
| Powermatic 3520A toolrest post diameter? | 2/18/2003, 5:27 pm |
| Raising a Delta Lathe to more comfortable | 2/18/2003, 2:54 pm |
| They Don’t Make Them Like They Used To | 2/18/2003, 1:17 pm |
| Spur centers? | 2/18/2003, 12:31 pm |
| Lathe Toolrest Question | 2/18/2003, 11:51 am |
| log sealer | 2/18/2003, 11:22 am |
| Turning Pith | 2/18/2003, 9:47 am |
| Alternatives to Beall Collet | 2/18/2003, 1:14 am |
| GR Michigan WW Show | 2/17/2003, 4:33 pm |
| RECOMMENDED READING: Sharpening gouges | 2/17/2003, 11:57 am |
| Hi all | 2/16/2003, 7:36 pm |
| Captured ring goblets | 2/16/2003, 7:33 pm |
| Vicmarc | 2/16/2003, 4:43 pm |
| Penturners Rendezvous *PIC* | 2/16/2003, 1:16 pm |
| Interesting sites in Wichita, Ks? | 2/16/2003, 11:10 am |
| Nova 3K structural question | 2/16/2003, 9:22 am |
| dry, spalted maple - end grain problems | 2/15/2003, 11:04 pm |
| Turning Aluminum on a wood lathe - LONG w Pics | 2/15/2003, 10:09 pm |
| Vega Mini Duplicator | 2/15/2003, 4:13 pm |
| Gloss finish | 2/14/2003, 4:18 pm |
| "taking" log leftovers from a clearing... good/bad? | 2/14/2003, 9:56 am |
| Sharpening *PIC* | 2/14/2003, 6:18 am |
| old-- new turner needs hands on help | 2/13/2003, 7:11 pm |
| my latest bowl -PIC- | 2/13/2003, 6:33 pm |
| Lathe Tool Holder with pics | 2/13/2003, 4:49 pm |
| EXPLODING BOWL Man am I bummed.:( | 2/13/2003, 12:55 pm |
| Chat question follow-up | 2/12/2003, 11:24 pm |
| Jamieson video | 2/12/2003, 9:55 pm |
| Discoloration | 2/12/2003, 8:41 pm |
| Tonight's turning topic | 2/12/2003, 8:40 pm |
| chain saws | 2/12/2003, 7:42 pm |
| Where do you get your turning blanks? | 2/12/2003, 4:25 pm |
| 4th New England Woodturning Symposium May 9-10 | 2/12/2003, 1:03 pm |
| Alan Stirit website? | 2/12/2003, 11:07 am |
| Looking for lathe opinions | 2/11/2003, 6:49 pm |
| Vacuum Pump Questions | 2/11/2003, 1:53 pm |
| Yippee! PM3520 | 2/11/2003, 11:48 am |
| CHAT ROOM, Wednesday night, "Spalted Wood" | 2/11/2003, 11:47 am |
| How can we educate the public, is it worth it? | 2/11/2003, 9:30 am |
| Spalted and "Punky" wood | 2/11/2003, 8:44 am |
| Pentacryl and Polycryl?? | 2/11/2003, 8:30 am |
| Turning Aspen? | 2/10/2003, 10:33 pm |
| Turning Cedar | 2/10/2003, 7:37 pm |
| Sanding discs | 2/10/2003, 6:25 pm |
| The Sanding Glove | 2/10/2003, 12:47 pm |
| Delta 14" owners | 2/10/2003, 11:40 am |
| mercury mini lathe owners | 2/10/2003, 10:08 am |
| Pen turning equipment | 2/9/2003, 11:57 pm |
| Arch punch or similar punch for cutting sandpaper | 2/9/2003, 11:09 pm |
| Logs To Blanks | 2/9/2003, 12:51 pm |
| Powermatic 90 tailstock | 2/9/2003, 10:56 am |
| What is indexing on a lathe for? | 2/9/2003, 12:46 am |
| Good Sources for Pen Equipment? | 2/8/2003, 10:50 pm |
| Woodturners Gloat! -- Seminar | 2/8/2003, 9:29 pm |
| Spalted Maple turning | 2/8/2003, 2:41 pm |
| 'Andi Wolfe' Showcase added to Creative Woodturning Site | 2/8/2003, 11:22 am |
| New, Formatting, HELP! | 2/8/2003, 10:24 am |
| metal lathe bits for turning wood | 2/8/2003, 10:17 am |
| Nova base weight placement | 2/8/2003, 8:09 am |
| Source for Tools without Handles | 2/7/2003, 10:25 pm |
| texturing tools on the cheap? | 2/7/2003, 1:24 pm |
| Bowl questions and wood questions | 2/7/2003, 12:55 pm |
| Used Jet 1236 prices | 2/7/2003, 11:44 am |
| Super NOva package at KMS tools | 2/7/2003, 11:06 am |
| What size bowl gouge? | 2/6/2003, 4:32 pm |
| Old Lathe | 2/6/2003, 4:23 pm |
| good beginner's web site? | 2/6/2003, 3:31 pm |
| Spalting - A summary of last nights Chat Room discussion | 2/6/2003, 9:14 am |
| Turning Speed for Exotic Hardwoods? | 2/6/2003, 7:40 am |
| Sears lathe information | 2/5/2003, 8:55 pm |
| Tonights turning chat | 2/5/2003, 8:05 pm |
| *** New Moderator! *** | 2/5/2003, 12:12 pm |
| Welcome | 2/5/2003, 11:10 am |
| Vacuum Chuck problems | 2/5/2003, 9:10 am |
| How is David Propst progressing? | 2/5/2003, 8:46 am |
| Howdy! | 2/5/2003, 12:06 am |
| Anyone have an update on Phil? | 2/4/2003, 1:08 pm |
| John Williams | 2/4/2003, 12:26 pm |
| Turning Topic for 2/05/03 | 2/3/2003, 5:30 pm |
| What 's going on in the world of turning? | 2/3/2003, 9:48 am |
| John Williams | 1/30/2003, 9:46 am |
| Turning chat 1/29/03 | 1/29/2003, 5:55 pm |
| Well, I did it now! | 1/29/2003, 7:11 am |
| New to Turning | 1/28/2003, 2:25 pm |
| How is Phil doing? Anyone heard this week? *NM* | 1/28/2003, 7:41 am |
| Spindle Gouge grind angle? | 1/27/2003, 12:21 pm |
| Gary, thank you. What a beautiful and fitting tribute to Dick. | 1/27/2003, 10:30 am |
| Treadle Lathe update | 1/24/2003, 5:57 pm |
| Great new front page!!! | 1/24/2003, 4:24 am |
| Turning Blanks | 1/23/2003, 9:30 pm |
| sorry about last night | 1/23/2003, 6:48 pm |
| Listen up new tool from Kelton McNaughton | 1/23/2003, 5:09 |
