| Topic |
 | New Turning Club | 12/29/2002, 9:11 am |
| Lathe Duplicator | 12/29/2002, 9:11 am |
| KISS Toolrest *PIC* | 12/28/2002, 4:03 am |
| White Xmas | 12/25/2002, 8:32 am |
| Old dog learns new trick... *PIC* | 12/24/2002, 9:42 pm |
| Thanks Ellis | 12/24/2002, 4:42 pm |
| Blessings of the season to all of you! | 12/24/2002, 11:49 am |
| Christmas Eve in the Turning Shop | 12/24/2002, 5:32 am |
| David Propst - What a guy! | 12/23/2002, 10:07 pm |
| Merry Christmas! | 12/23/2002, 7:58 am |
| WOW Wolf! *NM* | 12/23/2002, 5:18 am |
| Testing, one, two... | 12/22/2002, 1:04 am |
| Pen mandrels (again) | 12/21/2002, 10:51 pm |
| Finally getting a bit of good shop time... | 12/20/2002, 12:44 am |
| 12/25/02 Turning chat | 12/19/2002, 5:48 pm |
| Spalting | 12/19/2002, 9:32 am |
| Spalted wood question | 12/18/2002, 11:48 am |
| Zimmerman lathe | 12/18/2002, 11:38 am |
| Speed | 12/18/2002, 8:18 am |
| Stewart Chatter tool: Directions? Use? | 12/18/2002, 7:30 am |
| Phil Update Update | 12/17/2002, 9:08 pm |
| Phil Update | 12/17/2002, 8:30 pm |
| Powermatic 45 | 12/16/2002, 12:42 am |
| How-to make a cork bottle stopper is online... *PIC* | 12/15/2002, 6:34 pm |
| Hawaiian wood | 12/14/2002, 12:31 pm |
| starting new turning clubs | 12/13/2002, 11:18 pm |
| Okie woodturner | 12/13/2002, 6:54 am |
| Wood Dust Formally Listed As A Carcinogen | 12/12/2002, 6:24 am |
| YooHoo David P... | 12/10/2002, 3:18 pm |
| Apple Ridge Turning Club | 12/10/2002, 7:13 am |
| Finish | 12/9/2002, 9:30 am |
| Wed Turning Chat 12/11/02 | 12/7/2002, 4:22 pm |
| Orange grove wood | 12/5/2002, 9:14 pm |
| Update on Palmer's Memorial Service | 12/5/2002, 3:38 pm |
| Pictures of Palmer Sharpless. (Ellis) *PIC* | 12/5/2002, 2:40 pm |
| Lathe mandrel size? | 12/4/2002, 8:03 pm |
| Palmer Sharpless | 12/4/2002, 4:00 pm |
| Turning chat for 12/4/02 | 12/4/2002, 3:00 pm |
| Anybody going to the FL Symposium? | 12/4/2002, 7:13 am |
| Double sided tape | 12/3/2002, 3:08 pm |
| Choosing a lathe...tests | 12/2/2002, 10:01 am |
| Looking For a New Lathe??? | 12/1/2002, 6:04 pm |
| Thanks Jean | 11/30/2002, 4:51 pm |
| Help! Help! I need some help! | 11/29/2002, 7:32 pm |
| Sharpening Turning Tools | 11/27/2002, 8:26 pm |
| Ambrosia Maple Hat *PIC* | 11/27/2002, 5:28 am |
| A Visit With Phil | 11/26/2002, 6:58 pm |
| Covered wooden bowls | 11/25/2002, 7:24 pm |
| Nova chuck problem/Jet JWL1236 question | 11/25/2002, 12:00 pm |
| Turning chat 11/27/02 | 11/25/2002, 10:49 am |
| Barbara G., How was John C. Campbell? | 11/25/2002, 8:11 am |
| replaceing lathe bearings | 11/24/2002, 12:43 pm |
| New Jet 16" Lathe *PIC* | 11/24/2002, 2:02 am |
| locus | 11/23/2002, 8:03 pm |
| Turning Club Memberships? | 11/23/2002, 8:41 am |
| Nice tray, Pete! | 11/23/2002, 8:01 am |
| Mini Turning Lathes | 11/22/2002, 12:24 pm |
| Phil Wall update | 11/22/2002, 8:36 am |
| Turning a 1200 Lb. Burl | 11/21/2002, 10:15 am |
| Signing your name on Walnut? | 11/20/2002, 12:49 pm |
| 11/20/02 Turning Chat Topic | 11/19/2002, 11:53 am |
| Cherry burls | 11/18/2002, 9:07 pm |
| Turning Mulberry? | 11/18/2002, 7:55 pm |
| Hey David Propst... | 11/18/2002, 3:47 pm |
| Honing a gouge. | 11/17/2002, 5:31 pm |
| Hey Wally... Roughed Endgrain Vessel Thickness? | 11/16/2002, 10:27 pm |
| WOW TERRY! A PIC OF A PIXIE IN YOUR SUGAR BOWL!!! | 11/15/2002, 9:56 pm |
| more bandsaw questions | 11/15/2002, 2:59 pm |
| wanted: lathe tools | 11/15/2002, 1:30 am |
| Turning Chat 11/13. | 11/14/2002, 7:04 pm |
| New turning club N.GA | 11/14/2002, 11:11 am |
| Glueing waste blocks | 11/14/2002, 9:48 am |
| New Delta Big Bad Lathe | 11/13/2002, 11:59 pm |
| Bad news for Conover Lathes | 11/13/2002, 5:28 pm |
| Wood Movement | 11/13/2002, 10:32 am |
| endgrain | 11/12/2002, 2:02 pm |
| Turned Table | 11/12/2002, 1:37 pm |
| (2) more Potpourri Bowls | 11/12/2002, 12:50 pm |
| Turning Topic for 11/12/02 | 11/12/2002, 8:22 am |
| Bowl warpage | 11/12/2002, 12:29 am |
| Any Rule of thumb | 11/11/2002, 2:26 pm |
| Bandsaw comparison question | 11/11/2002, 11:54 am |
| Lathe DC | 11/10/2002, 11:18 pm |
| woodturning lessons | 11/10/2002, 5:43 pm |
| Phil Update | 11/8/2002, 6:57 pm |
| Cherry Potpourri bowl w/pics | 11/7/2002, 12:01 pm |
| Turners in the Tampa/St.Petersburg Area | 11/7/2002, 10:06 am |
| Vacuum Chucking | 11/7/2002, 9:20 am |
| Ernie Conover on Soap Soaking | 11/6/2002, 11:41 am |
| Wolverine system question | 11/5/2002, 10:10 pm |
| Hey David Propst | 11/5/2002, 6:50 pm |
| White Poplar, Populus alba | 11/5/2002, 2:48 pm |
| Catalpa wood | 11/5/2002, 1:52 pm |
| Hey T Daniel! | 11/5/2002, 8:39 am |
| Topic for 11/06/02 | 11/4/2002, 6:46 pm |
| cellulose thinners | 11/4/2002, 4:53 pm |
| Boiled Bowl Experiment *PIC* | 11/3/2002, 10:37 pm |
| KISS Toolrest Review | 11/2/2002, 9:05 pm |
| Phil Wall Update | 11/1/2002, 12:15 pm |
| Hollowing rigs | 10/29/2002, 2:27 pm |
| Wine glass stems | 10/29/2002, 12:01 pm |
| DIY Scraper Steel? | 10/29/2002, 7:50 am |
| Legacy 1500 Ornamental Mill | 10/27/2002, 9:56 pm |
| Osage, oh no! | 10/27/2002, 6:06 pm |
| Dang, cheap Midi ratchet handles | 10/27/2002, 2:05 pm |
| Items for sale | 10/26/2002, 2:35 pm |
| Delta lathe | 10/26/2002, 10:44 am |
| Nice work wolf... | 10/25/2002, 9:23 am |
| Update on Phil | 10/24/2002, 7:17 am |
| David Propst | 10/24/2002, 5:48 am |
| Ring and jewelry holder | 10/23/2002, 12:50 pm |
| Turning topic for 10/23/02 | 10/23/2002, 10:42 am |
| Bocote gloat *PIC* | 10/22/2002, 3:55 pm |
| Bottle Stoppers... | 10/19/2002, 12:30 pm |
| Phil | 10/18/2002, 10:13 pm |
| Phil Is Back In The Hospital | 10/18/2002, 9:34 pm |
| Skewed?? | 10/18/2002, 12:12 pm |
| My first Putumuju experience *PIC* | 10/17/2002, 8:51 pm |
| Arizona Ash | 10/17/2002, 9:05 am |
| Hollowing Calipers? | 10/17/2002, 8:23 am |
| Revelation about lathe and drilling | 10/17/2002, 7:55 am |
| Woodcut Proforme Tool | 10/16/2002, 8:53 am |
| Lathe tools | 10/15/2002, 11:43 pm |
| New Turning Club N. GA. | 10/15/2002, 4:42 pm |
| Woodtek Lathe | 10/14/2002, 7:39 pm |
| Segmented Turnings | 10/14/2002, 8:09 am |
| Turning topic for 10/16/02 | 10/13/2002, 7:31 pm |
| Is that lathe a homebrew? | 10/13/2002, 6:04 pm |
| Terry D.? | 10/11/2002, 7:55 pm |
| Edge holding tests | 10/7/2002, 4:14 pm |
| Finishes | 10/7/2002, 3:57 pm |
| Jamboree Note | 10/7/2002, 6:59 am |
| Turning chat topic 10/9/02 | 10/6/2002, 8:43 pm |
| Turning Classes | 10/6/2002, 1:31 pm |
| Need Finish ideas for Red Cedar | 10/5/2002, 5:48 am |
| Awright, Phil! | 10/4/2002, 5:12 pm |
| Bowl gouge | 10/4/2002, 1:18 pm |
| Norm's Bowl Turning | 10/4/2002, 12:18 pm |
| natural edge forms | 10/4/2002, 9:25 am |
| Bowl Lathes | 10/3/2002, 7:46 am |
| Gloat For Phil Wall! | 10/3/2002, 4:46 am |
| Live center question | 10/1/2002, 11:31 am |
| What to do when inspiration fails? | 10/1/2002, 8:30 am |
| Vac chuck | 9/30/2002, 10:05 pm |
| New boxes *PIC* | 9/30/2002, 9:09 pm |
| Beginner Questions | 9/30/2002, 11:18 am |
| Turning Chat Topic for 10/2/02 | 9/30/2002, 9:24 am |
| Thanks, Terry | 9/29/2002, 10:06 am |
| Chat??? | 9/28/2002, 1:34 pm |
| Peppermill turning question | 9/27/2002, 9:27 am |
| Tpoic? for 10/2/02 | 9/27/2002, 8:37 am |
| Interesting... | 9/27/2002, 5:57 am |
| Phil's Jamboree Oct 5th! | 9/26/2002, 10:08 pm |
| Platter and bowls with pics *PIC* | 9/25/2002, 7:40 am |
| Sanding Sealers... *PIC* | 9/24/2002, 9:31 pm |
| Turning Topic for 9/25/02 | 9/21/2002, 7:23 pm |
| Leaf peeping & woodturning | 9/20/2002, 1:56 pm |
| Wed.chatroom | 9/18/2002, 9:46 pm |
| lathe dust collector | 9/18/2002, 8:36 pm |
| Which Finish Sheen? | 9/18/2002, 12:44 pm |
| Texas Hardwoods | 9/17/2002, 11:05 am |
| Vacuum Gouge | 9/16/2002, 9:49 am |
| Hollowing tools | 9/15/2002, 10:37 am |
| Cherry burls | 9/15/2002, 7:52 am |
| Turners Chat 9/18/02 | 9/15/2002, 7:27 am |
| Dust collector | 9/13/2002, 9:16 pm |
| Wow, Wait 'til Dominic Finds Out! | 9/13/2002, 5:04 pm |
| Keeping a sharp edge on a spindle gouge | 9/13/2002, 2:25 pm |
| HTML is here | 9/13/2002, 1:07 pm |
| Turning Tools for Amateur? | 9/13/2002, 9:56 am |
| Hard as nails... | 9/12/2002, 8:26 pm |
| Shellac | 9/12/2002, 12:49 pm |
| More Info | 9/12/2002, 11:37 am |
| Phil's Jamboree Details | 9/12/2002, 8:43 am |
| standard nova chuck | 9/11/2002, 9:05 pm |
| Getting Started | 9/11/2002, 6:56 pm |
| Silver Maple & Mahagony seg. bowl w/pics *PIC* | 9/10/2002, 12:18 pm |
| Homemade Hollowing Rig - long *PIC* | 9/9/2002, 10:05 pm |
| First Hollow Form *PIC* | 9/9/2002, 11:01 am |
| Riverhill Jamboree | 9/8/2002, 6:55 pm |
| Turning Topic for 9/11/02 | 9/8/2002, 5:02 pm |
| Got Walnut? *PIC* | 9/7/2002, 4:28 pm |
| Cracked Lathe | 9/7/2002, 2:21 am |
| Presentation from a pro... *PIC* | 9/6/2002, 12:06 pm |
| Turning: Best method, sanding spindles? | 9/6/2002, 7:50 am |
| Another Question. Hollowforms | 9/6/2002, 7:31 am |
| Lathe recommendations | 9/5/2002, 10:02 pm |
| Woodcraft is Tops! | 9/5/2002, 9:02 pm |
| Anybody going to the Symposium in GA next weekend? | 9/5/2002, 7:18 pm |
| Terry Daniel, tell us about this... | 9/5/2002, 7:15 pm |
| Oneway Products Best Source ? | 9/5/2002, 9:59 am |
| My Question for all the turners | 9/5/2002, 3:33 am |
| interesting link | 9/4/2002, 11:15 pm |
| More messages--Question 1 | 9/4/2002, 6:13 pm |
| Turning Topic for 9/4/02 | 9/3/2002, 6:21 pm |
| As The Lathe Turns. | 9/3/2002, 3:48 pm |
| Waterlox. Whadaya like? | 9/2/2002, 8:26 pm |
| reclaimed river logs | 9/1/2002, 8:03 am |
| Almond & Eucalyptus? | 8/31/2002, 12:44 am |
| What is the latest.. | 8/30/2002, 10:30 pm |
| London Calling | 8/30/2002, 11:12 am |
| Web Site for Inlace ???? *NM* | 8/29/2002, 10:06 am |
| I have decided on a class. | 8/29/2002, 6:17 am |
| Couple new Russ articles | 8/29/2002, 5:33 am |
| Wine Bottle Stoppers *PIC* | 8/28/2002, 2:27 pm |
| Upcoming trip | 8/28/2002, 10:26 am |
| WHOO HOO!!!!!!!!! | 8/27/2002, 12:58 pm |
| Hello All! | 8/26/2002, 10:38 pm |
| CA live oak | 8/26/2002, 4:03 pm |
| Russ's Corner article | 8/26/2002, 2:23 pm |
| Turning Chat for 8/21/02 | 8/26/2002, 9:02 am |
| Barbara, WOW!!! *NM* | 8/24/2002, 7:15 pm |
| More Russ Articles | 8/23/2002, 8:27 am |
| So much wood so little time... | 8/23/2002, 8:09 am |
| Jet Mini Lathe? | 8/22/2002, 4:54 pm |
| segmeted bowls | 8/20/2002, 8:38 pm |
| ***New Department*** | 8/20/2002, 9:23 am |
| A note on bearings. | 8/19/2002, 6:46 pm |
| 8/21/02 Chat Topic | 8/19/2002, 12:39 pm |
| cole jaws | 8/16/2002, 11:51 pm |
| Hollow Turning Video | 8/14/2002, 10:58 pm |
| My Finishing Secrets | 8/13/2002, 2:46 pm |
| Truing a roughed out bowl | 8/13/2002, 10:14 am |
| Wed night chat 8/14/02 | 8/13/2002, 9:59 am |
| Help Please-Long | 8/12/2002, 2:32 pm |
| Tulip poplar | 8/12/2002, 11:57 am |
| Nice Bowl! | 8/11/2002, 8:29 pm |
| Speaking of pool cues, check out this site | 8/10/2002, 7:23 am |
| Cole Jaws or Jumbo for reverse turning? | 8/7/2002, 9:39 pm |
| ChucK / Jaw Question | 8/7/2002, 2:31 pm |
| Are there any inexpensive and adequate moisture meters | 8/5/2002, 10:27 pm |
| to Paul keller guess your email has changed | 8/3/2002, 6:39 pm |
| Help With Shop Shot Submission | 8/3/2002, 4:02 pm |
| Lathe Turners Forum Website? | 8/3/2002, 9:08 am |
| Irish nails - Again | 8/2/2002, 6:28 pm |
| Oneway 1018 | 8/2/2002, 12:14 am |
| Wally last weekend at Sophies | 8/1/2002, 1:06 pm |
| Nested Bowls *PIC* | 8/1/2002, 12:14 am |
| finishing a maple burl | 7/31/2002, 2:53 pm |
| Turning chat for Wed 7/31 | 7/31/2002, 9:15 am |
| Do I need to say that they look great | 7/31/2002, 8:12 am |
| Whenday turning Chat | 7/31/2002, 8:06 am |
| Headed North | 7/30/2002, 4:55 am |
| AC in the shop | 7/29/2002, 10:51 pm |
| What speeds on the JET 1236 ??? | 7/28/2002, 8:41 pm |
| Power Carving Tools for Turnings | 7/28/2002, 5:57 pm |
| Cost for search Engines ?? | 7/26/2002, 10:01 pm |
| Irish Nails... | 7/26/2002, 4:01 pm |
| Is there a difference in double sided tape ???? | 7/26/2002, 2:01 pm |
| More pool cue stuff | 7/25/2002, 2:41 pm |
| Can't get around it... | 7/25/2002, 9:47 am |
| Why? | 7/24/2002, 9:12 pm |
| Making your own turning tools | 7/24/2002, 8:43 am |
| woodturning teacher | 7/23/2002, 3:27 pm |
| Topic of the Week, Making Owr Own Lathe Tools | 7/23/2002, 10:22 am |
| green , kiln or air dried ? | 7/22/2002, 11:07 pm |
| Pool Cue | 7/22/2002, 8:19 am |
| Top | 7/21/2002, 8:58 pm |
| W. E. T. | 7/18/2002, 4:44 pm |
| Thank you Larry Hancock.... *PIC* | 7/16/2002, 7:26 pm |
| Vacation/Woodturning | 7/15/2002, 11:04 am |
| Topic for July 17 | 7/13/2002, 1:58 pm |
| Powermatic Lathe | 7/13/2002, 1:08 am |
| Sharpening on Tormek | 7/12/2002, 11:16 am |
| Update on Me! | 7/10/2002, 9:29 pm |
| Veneer cores | 7/10/2002, 12:27 pm |
| Instant Gallery Pic | 7/10/2002, 8:39 am |
| Turning Topic for 7/10/02 | 7/10/2002, 8:12 am |
| Graeme Priddle At Phil's!!! | 7/7/2002, 10:17 pm |
| Faceplate stuck | 7/7/2002, 12:18 am |
| Nova & Super Nova Chucks | 7/3/2002, 10:48 pm |
| Home From The Hospital! | 7/3/2002, 1:44 pm |
| Jet JWL1236 Lathe Motor problems | 7/3/2002, 10:17 am |
| Wed night woodturning chat | 7/3/2002, 8:00 am |
| Symposium pictures | 7/2/2002, 6:33 pm |
| David's accident | 7/2/2002, 3:53 pm |
| Prayers for David Propst | 7/2/2002, 8:41 am |
| Riverhill Jamboree RSVP's | 7/1/2002, 6:22 am |
| Woodturning Trickery | 6/30/2002, 6:22 pm |
| AAW Symposium attendees?? | 6/29/2002, 9:32 am |
| face laminating? | 6/28/2002, 7:42 pm |
| Turned out the time was right... *PIC* | 6/27/2002, 6:37 pm |
| Database Link | 6/27/2002, 1:52 pm |
| Wed Night Chat Turning Green Wood | 6/27/2002, 2:01 am |
| Phil Wall Update | 6/26/2002, 11:24 am |
| Wed Night Chat Turning Green Wood | 6/26/2002, 7:43 am |
| Visit with Dresdners | 6/26/2002, 6:24 am |
| Norfolk Pine | 6/25/2002, 9:51 pm |
| Sweetgum & Cherry Bowls w/pics *PIC* | 6/25/2002, 12:49 pm |
| lathes | 6/24/2002, 5:08 pm |
| Japanese maple? | 6/23/2002, 5:11 pm |
| Grand OPening!! | 6/22/2002, 7:58 pm |
| Inovative mini lathe at the movies, | 6/22/2002, 11:26 am |
| Turning and drying green wood | 6/20/2002, 4:29 pm |
| Wall Sculpture (repair/design oportunity) | 6/20/2002, 3:28 pm |
| Good Chat | 6/20/2002, 7:37 am |
| Return to turning | 6/17/2002, 10:33 pm |
| Going buggy here! | 6/17/2002, 4:42 pm |
| Spalted Bowl - food use | 6/17/2002, 12:59 pm |
| Turtle Schmurtle! *PIC* | 6/17/2002, 12:29 pm |
| My first vessel *PIC* | 6/16/2002, 10:18 pm |
| Open invitation. | 6/16/2002, 3:31 pm |
| I'm Home | 6/15/2002, 11:01 pm |
| Old Tools | 6/15/2002, 11:12 am |
| Plate vs. Platter | 6/14/2002, 2:10 pm |
| Vacuum Chuck | 6/13/2002, 8:54 pm |
| Lathe Stand | 6/13/2002, 3:03 pm |
| Chat Room and "Topic of the Week" | 6/13/2002, 11:28 am |
| Larry's hat PIC | 6/12/2002, 5:26 pm |
| Cherry vessel pic *PIC* | 6/11/2002, 8:57 pm |
| Beall Buffing on a table ??? | 6/11/2002, 4:02 pm |
| Been away for a bit... | 6/10/2002, 10:02 pm |
| directions for mixing inlace | 6/10/2002, 1:21 pm |
| OT Portable Soup *PIC* | 6/10/2002, 10:22 am |
| Larry's Visit to Kutztown *PIC* | 6/10/2002, 10:10 am |
| how to start a plate ? | 6/9/2002, 9:29 pm |
| Turning Wax Wood | 6/7/2002, 8:16 pm |
| Thunderstorms | 6/6/2002, 9:17 pm |
| Larry Hancock visiting | 6/6/2002, 5:22 pm |
| Genric box turning how-to posted *PIC* | 6/5/2002, 5:18 pm |
| Nova Compac chuck | 6/4/2002, 2:30 pm |
| More Stott inspired stuff... *PIC* | 6/4/2002, 12:30 pm |
| Comments on Spindle Height *PIC* | 6/4/2002, 1:37 am |
| Lathe Stand Pic again?? *PIC* | 6/3/2002, 9:06 pm |
| Chris Stott... *PIC* | 6/3/2002, 10:35 am |
| Wed turning chat subject | 6/3/2002, 9:29 am |
| New Lathe Stand & a Stand Trivia ? | 6/2/2002, 11:41 pm |
| Spiral curl technique *PIC* | 6/1/2002, 9:13 am |
| Web page update | 5/31/2002, 8:17 pm |
| GFI's and Phil's shop | 5/31/2002, 11:48 am |
| Ebony Tips | 5/31/2002, 11:29 am |
| Wood turning class in Phoenix | 5/30/2002, 7:33 pm |
| OT:...Horns for turing *PIC* | 5/30/2002, 7:30 am |
| Chat topic 5/29 | 5/29/2002, 9:07 am |
| Beautiful wood, Terry! *NM* | 5/28/2002, 3:16 pm |
| Wanted: Topic Master! | 5/26/2002, 6:52 am |
| Saturday Phil Update | 5/25/2002, 11:13 pm |
| Any Update on Al | 5/25/2002, 9:01 am |
| ambrosia, birdseye maple log | 5/24/2002, 7:13 pm |
| My Trip to Walmart *PIC* | 5/24/2002, 2:12 pm |
| Phil's Surgery Is Today | 5/24/2002, 7:03 am |
| Fingernail or standard bowl gouge? | 5/23/2002, 5:36 pm |
| Phil Update | 5/22/2002, 11:20 am |
| Turning books | 5/22/2002, 9:01 am |
| And a Myrtlewood box *PIC* | 5/21/2002, 9:43 pm |
| Mahogany turning... *PIC* | 5/21/2002, 9:40 pm |
| Planning my vacation route | 5/21/2002, 9:20 pm |
| Honey Locust | 5/21/2002, 11:32 am |
| Hollowing Tool Handles | 5/21/2002, 11:29 am |
| Bowl scrapers | 5/21/2002, 9:27 am |
| Kudos to Highland Hardware | 5/21/2002, 8:05 am |
| turning poplar | 5/20/2002, 3:20 pm |
| May 22 Chat Topic | 5/19/2002, 2:31 pm |
| Bit the Bullet | 5/17/2002, 11:21 am |
| Heading to Asheville | 5/17/2002, 8:53 am |
| Update On Phil! | 5/16/2002, 9:38 pm |
| elm,elm,elm..free!!! | 5/16/2002, 2:40 pm |
| Hello, lurkers! | 5/16/2002, 10:15 am |
| Turners Topic for 6/15 | 5/14/2002, 9:14 am |
| Sanding bowls | 5/13/2002, 10:27 am |
| rotary air fitting for Vacuume chuck | 5/13/2002, 2:18 am |
| WoodWriteLTD still in Business ? | 5/12/2002, 9:26 pm |
| Proforme Question | 5/12/2002, 7:22 am |
| Nova chucks | 5/11/2002, 10:33 am |
| Pecan | 5/11/2002, 10:31 am |
| Two basic (and hopefully quick) questions | 5/10/2002, 8:43 am |
| Lathe bearings | 5/10/2002, 12:13 am |
| Spalting Wood | 5/9/2002, 3:36 pm |
| Visit with Phil, Ruth and Lissi | 5/9/2002, 11:13 am |
| Great photo Dave! *NM* | 5/9/2002, 10:19 am |
| Hollowing tools | 5/8/2002, 9:28 pm |
| Craftsman varispeed grinder | 5/8/2002, 1:19 pm |
| CA glue questions | 5/8/2002, 8:42 am |
| Weekend at Phil's (Long) | 5/7/2002, 1:51 pm |
| Norway Maple Urn Hollow form w/pics *PIC* | 5/7/2002, 12:56 pm |
| Weekend At Phil's! | 5/5/2002, 10:31 pm |
| Ron Kent finish | 5/3/2002, 11:43 am |
| Norfolk Island Pine | 5/3/2002, 5:56 am |
| Sizing tool source | 5/2/2002, 10:17 pm |
| Thanks so much, Ellis | 5/2/2002, 1:29 pm |
| Phil Is On The Way Home! | 5/2/2002, 1:03 pm |
| Tuesday Update On Phil | 4/30/2002, 11:21 pm |
| Southern States Symposium | 4/30/2002, 7:40 am |
| Phil Wall Update | 4/29/2002, 10:22 pm |
| It's BACK!!!! | 4/29/2002, 11:21 am |
| Prayer request for Phil Wall | 4/29/2002, 8:55 am |
| Hollowing dry wood | 4/28/2002, 7:26 pm |
| Re: Chuck Dilemma | 4/26/2002, 9:29 pm |
| Re: Chuck Dilemma | 4/26/2002, 9:17 pm |
| Re: Chuck Dilemma | 4/26/2002, 9:17 pm |
| driftwood | 4/25/2002, 5:24 pm |
| Southern state symposium | 4/25/2002, 9:47 am |
| Lathe Stand *PIC* | 4/25/2002, 3:40 am |
| Reverse/Jam chucking tips | 4/24/2002, 4:54 pm |
| VicMarc VM120 Chuck | 4/24/2002, 2:09 am |
| New Lathe | 4/22/2002, 11:21 pm |
| wood for handles | 4/22/2002, 6:35 pm |
| Coming to PA | 4/22/2002, 2:51 pm |
| Basic bowl question | 4/22/2002, 10:36 am |
| Vacuum Chucking | 4/22/2002, 9:51 am |
| Finishing Spalted Wood | 4/22/2002, 9:48 am |
| ***Question of the Week*** Faceplates or Chucks? | 4/21/2002, 9:15 am |
| Vessel, not bowl! | 4/21/2002, 7:47 am |
| CENTER STUDY | 4/20/2002, 10:04 pm |
| NIce Nice workmansship Wally. | 4/20/2002, 9:07 pm |
| What wood is this? | 4/20/2002, 8:10 pm |
| WOW! Wally what wonderful work! *NM* | 4/20/2002, 4:37 pm |
| Fabulous piece Wally!! *NM* | 4/20/2002, 2:20 pm |
| Turning Chat 4-24 | 4/20/2002, 7:44 am |
| wild boxelder | 4/18/2002, 12:09 pm |
| "You can't handle the truth" | 4/17/2002, 4:26 pm |
| More gloss for oil finish | 4/17/2002, 4:09 pm |
| Wed Night Turners Chat Topic | 4/16/2002, 10:58 am |
| Gouge preference | 4/14/2002, 8:34 am |
| lathe tools | 4/12/2002, 3:58 pm |
| Finish cutting the inside of a bowl. | 4/12/2002, 8:32 am |
| dust collection *PIC* | 4/12/2002, 8:22 am |
| jAMBOREE IS FOR Y'ALL | 4/12/2002, 1:38 am |
| NIce Bill, | 4/11/2002, 10:05 pm |
| Previous LInk is wrong | 4/11/2002, 2:23 pm |
| Jamboree accomodations | 4/11/2002, 2:17 pm |
| Band Saw Blades &..... | 4/10/2002, 11:48 am |
| ***Weekly Topic*** Bowl Saver Systems | 4/10/2002, 7:57 am |
| Jamboree | 4/9/2002, 9:43 pm |
| Must shoot the mailman.... | 4/9/2002, 2:53 pm |
| Jet Lathe tail/heatstock alignment? | 4/9/2002, 11:17 am |
| Wed night chat | 4/8/2002, 10:30 am |
| RSVP&Proposed Jamboree schedule *PIC* | 4/8/2002, 1:17 am |
| More Jamboree. | 4/6/2002, 9:47 pm |
| Woodcentral Southern Jamboree | 4/6/2002, 2:11 am |
| Hmm. Sorry about that. | 4/5/2002, 1:23 pm |
| Re: Lathe stand | 4/4/2002, 3:44 pm |
| Re: Lathe stand | 4/4/2002, 2:12 pm |
| Another lathe stand question | 4/4/2002, 9:01 am |
| Sassafras bowl - opinions? *PIC* | 4/3/2002, 8:15 pm |
| Nice visit and other stuff | 4/3/2002, 2:09 am |
| ***Topic of the Week*** Lathe Speed *PIC* | 4/2/2002, 8:30 am |
| Saturday afternoon at the lathe *PIC* | 4/1/2002, 8:19 pm |
| My Poolewood Has Landed! *PIC* | 4/1/2002, 11:13 am |
| HELP! | 4/1/2002, 10:51 am |
| Well, that made me homesick! | 3/31/2002, 7:12 pm |
| You guys make me jealous! | 3/30/2002, 8:21 pm |
| Turning Chisels for a Rookie | 3/29/2002, 4:44 pm |
| Grinder wheels | 3/29/2002, 12:17 am |
| April 3 Topic | 3/28/2002, 9:03 am |
| Ambrosia walnut? *PIC* | 3/28/2002, 8:47 am |
| ***Topic Of The Week*** Wood Collection and Preparation | 3/27/2002, 8:25 am |
| lathe drive | 3/26/2002, 12:12 pm |
| Work clothes | 3/26/2002, 8:19 am |
| John William's bowl | 3/25/2002, 3:51 pm |
| Interesting link | 3/25/2002, 9:11 am |
| New Oneway steadyrest *PIC* | 3/24/2002, 11:52 pm |
| Questions for Lathe gurus | 3/24/2002, 8:33 am |
| John's piece | 3/23/2002, 1:14 am |
| John Williams Bowl | 3/22/2002, 4:20 pm |
| Natural Edge Bowl questions | 3/22/2002, 10:19 am |
| Way to go guy's, You touched a heart | 3/21/2002, 11:43 pm |
| Clear finish | 3/21/2002, 1:19 pm |
| Turning chat | 3/21/2002, 7:35 am |
| Oneway vs Poolewood | 3/19/2002, 8:01 am |
| any pen turners out there ? *NM* | 3/17/2002, 8:21 pm |
| Any Sasafras turning tips? | 3/16/2002, 5:32 pm |
| Bowl Gouges | 3/16/2002, 2:30 pm |
| crab apple | 3/16/2002, 8:48 am |
| Fence Post candle sticks | 3/15/2002, 9:44 am |
| Cherry Hollow form & Osage Orange Bowl *PIC* | 3/15/2002, 9:01 am |
| gouge grind | 3/14/2002, 10:14 pm |
| Wednesday 3-20 Turners Chat topic | 3/14/2002, 11:05 am |
| Renwick Gallery exhibit: Wood Turning Since 1930 | 3/13/2002, 6:48 pm |
| Toolrests | 3/12/2002, 3:06 pm |
| Wally...where's the snake? | 3/12/2002, 10:19 am |
| Nice Pot Wally | 3/12/2002, 7:32 am |
| Basil's box of stamps | 3/10/2002, 11:12 pm |
| CHATROOM TOPIC OF THE WEEK | 3/10/2002, 1:56 pm |
| **Topic of the Week** Oil Finishes | 3/8/2002, 11:17 pm |
| Musings | 3/8/2002, 9:06 pm |
| Tops are off to Kaitlin | 3/7/2002, 6:08 pm |
| New motor for Lathe | 3/7/2002, 3:05 pm |
| Next week's chat | 3/6/2002, 11:01 pm |
| Bowl gouges again | 3/6/2002, 3:55 pm |
| Amer. Woodturner & Phil Wall | 3/6/2002, 7:44 am |
| ....And the winners are..... | 3/6/2002, 7:27 am |
| wood in | 3/5/2002, 10:47 pm |
| Houston we have a problem (drawing related) | 3/5/2002, 6:25 pm |
| Scraping inside of bowls | 3/5/2002, 9:05 am |
| Ellis, you want in on the drawing? | 3/5/2002, 7:25 am |
| Anyone using the 3M Power Visor | 3/4/2002, 3:59 pm |
| Finish for Ash bowls/platters? | 3/4/2002, 1:39 pm |
| Continuing the fun with a drawing this time. | 3/4/2002, 1:04 pm |
| Power Co. clearing trees! | 3/4/2002, 11:27 am |
| Bowl Gouge Grinding settings | 3/4/2002, 11:24 am |
| Next Prize (This is fun!) | 3/4/2002, 10:44 am |
| Consolation prize for the swingers. | 3/4/2002, 10:21 am |
| Glad to be at work(-: | 3/4/2002, 9:12 am |
| Anybody want a piece of spalted elm? | 3/4/2002, 7:33 am |
| anyone using a 3M power Visor | 3/3/2002, 7:04 pm |
| Hey, Paul Keller, | 3/3/2002, 12:20 am |
| Check out this envelope! *PIC* | 3/2/2002, 6:02 pm |
| research update | 3/2/2002, 12:29 pm |
| New Turning Chat Format | 3/1/2002, 4:45 pm |
| Good looking piece of work, Joe *NM* | 3/1/2002, 10:05 am |
| Termite Tool | 3/1/2002, 8:42 am |
| Topic? | 2/28/2002, 8:04 pm |
| Wow Joe, | 2/28/2002, 6:01 pm |
| Chuck question | 2/28/2002, 11:24 am |
| Royal Paulonia | 2/27/2002, 10:38 pm |
| Beall System | 2/27/2002, 1:51 pm |
| enough blanks/not enough time | 2/26/2002, 10:54 pm |
| Desperately seeking | 2/26/2002, 4:36 pm |
| Baby steps | 2/26/2002, 3:57 pm |
| Turning chat for 2-27 | 2/26/2002, 12:01 pm |
| Kind of stuck. | 2/26/2002, 9:02 am |
| Barbara, did you | 2/26/2002, 9:02 am |
| Question | 2/26/2002, 7:37 am |
| Needing a bowl gouge. | 2/25/2002, 9:05 am |
| A really good looking vessel Barbara *NM* | 2/24/2002, 2:26 pm |
| Got a Digital Camera Today *PIC* | 2/22/2002, 5:28 pm |
| Sycamore Conclusion! *PIC* | 2/22/2002, 5:10 pm |
| Honey Locust Bowl *PIC* | 2/21/2002, 1:16 pm |
| captive hollowing tools | 2/21/2002, 7:21 am |
| Hollowing ques/book recommendation? | 2/20/2002, 1:51 pm |
| Sycamore Update | 2/19/2002, 5:45 pm |
| Lathe Purchase ( new user ) | 2/18/2002, 4:50 am |
| How many X's is that hat, Larry? *NM* | 2/17/2002, 11:30 pm |
| Observations (long) | 2/17/2002, 6:35 pm |
| nm | 2/17/2002, 6:33 pm |
| Research | 2/16/2002, 8:37 pm |
| Nice Piece Wolf *NM* | 2/16/2002, 7:37 am |
| Live Center Recomendations? | 2/16/2002, 5:53 am |
| Tops! The home stretch. | 2/15/2002, 3:49 pm |
| Sycamore Question | 2/15/2002, 1:48 pm |
| Australia Visit | 2/15/2002, 12:27 pm |
| Need welcome photos | 2/15/2002, 9:31 am |
| Faceplate Run-out | 2/14/2002, 5:36 pm |
| Sad news | 2/14/2002, 8:02 am |
| If you need a little encouragement... | 2/14/2002, 7:33 am |
| Guess What I Have? | 2/13/2002, 4:32 pm |
| Finished top shipping | 2/13/2002, 9:20 am |
| Tops! Sound off please... | 2/11/2002, 4:04 pm |
| Another Cherry Bowl *PIC* | 2/11/2002, 2:33 pm |
| Bowl boiling questions | 2/11/2002, 9:38 am |
| Most Required Lathe Features? | 2/11/2002, 6:15 am |
| Reworked turning site is up. | 2/11/2002, 4:10 am |
| tops for Kaitlin | 2/9/2002, 10:11 pm |
| cocobolo | 2/9/2002, 8:08 pm |
| Met John and Sue Veerkamp today | 2/9/2002, 8:00 pm |
| Woodcut handles interchangeable? | 2/8/2002, 9:45 am |
| revamped site | 2/7/2002, 9:55 am |
| Turning Chat Room | 2/7/2002, 7:58 am |
| "Seize The Wood" T-Shirt | 2/7/2002, 12:03 am |
| ***Chat Room Announcement*** | 2/5/2002, 9:20 pm |
| Loc-Line Lathe DC Hood Support *PIC* | 2/5/2002, 11:10 am |
| Nice bowl Pete. | 2/5/2002, 8:07 am |
| Visor Reccomendations | 2/4/2002, 8:43 pm |
| Shop Made Vacuum Chuck *PIC* | 2/4/2002, 2:07 am |
| Favorite woods? | 2/3/2002, 9:29 am |
| Phil Lowe at Wmsbrg | 2/1/2002, 11:51 am |
| I reached a decision this afternoon. | 1/30/2002, 5:33 pm |
| Turned goblets or chalices | 1/30/2002, 3:25 pm |
| Tops are rolling in | 1/30/2002, 8:33 am |
| Nice Tray | 1/29/2002, 2:06 pm |
| BIG Cherry Tree Harvest! *PIC* | 1/29/2002, 9:02 am |
| Sharpening Wheels | 1/27/2002, 12:48 pm |
| Boy, this started something.. | 1/26/2002, 10:51 pm |
| VFD & 3 Phase - how much HP Loss | 1/25/2002, 3:56 pm |
| Turning tools | 1/25/2002, 9:49 am |
| ***Topic of the Week *** SHARPENING*** | 1/25/2002, 9:03 am |
| Resp-O-Rator Dust Mask *PIC* | 1/25/2002, 7:10 am |
| Barbara, is any of that for sale or trade? | 1/24/2002, 9:36 pm |
| Question, Barbara.... | 1/24/2002, 10:01 am |
| Kaitlin tops | 1/23/2002, 5:06 pm |
| Roughing a blank | 1/21/2002, 10:38 pm |
| Question | 1/20/2002, 9:16 pm |
| Kaitlin Dresdner Tops | 1/18/2002, 6:18 pm |
| As promised... | 1/18/2002, 8:58 am |
| Grinding Wheel Info | 1/17/2002, 6:49 pm |
| Pen Finishes... | 1/16/2002, 8:57 am |
| Turning a crochet hook | 1/16/2002, 5:57 am |
| Tooling info needed | 1/15/2002, 6:25 pm |
| ***WoodWorks2002 is coming!*** | 1/15/2002, 3:37 pm |
| ***Topic Of The Week*** Sanding | 1/14/2002, 8:13 am |
| How'd they do it? | 1/13/2002, 8:30 pm |
| Cherry Plate *PIC* | 1/13/2002, 5:06 pm |
| Thanks! | 1/13/2002, 5:03 pm |
| Do any of you turn pens | 1/12/2002, 8:04 pm |
| Fuzzy Grain Hell!!! | 1/11/2002, 9:52 pm |
| teaching | 1/11/2002, 6:49 pm |
| Thread Cutter | 1/10/2002, 12:51 pm |
| What to look for in a lathe? | 1/9/2002, 8:57 pm |
| Walker Turner Lathe | 1/9/2002, 8:40 pm |
| Better Learning | 1/9/2002, 8:35 pm |
| Beautiful finishes & Where to start | 1/9/2002, 7:13 pm |
| Phil Wall/Dick Tuttle | 1/9/2002, 5:50 pm |
| Steve Paulsen | 1/8/2002, 7:57 am |
| ***WEEKLY TOPIC: How Did You Start Turning?*** | 1/4/2002, 6:09 pm |
| Accidental Result | 1/3/2002, 8:48 am |
| one more..... *PIC* | 1/2/2002, 10:10 pm |
| Black ? Walnut...another option..... *PIC* | 1/2/2002, 10:03 pm |
| That is cool news!! | 1/2/2002, 7:58 am |
| Big Blue Pre-Gloat *PIC* | 1/2/2002, 2:46 am |
| Bottle Stoppers | 12/31/2001, 7:49 am |
| To my new found friends | 12/28/2001, 4:57 pm |
| Lathe Acquisition | 9/17/2001, 8:22 am |
