| Topic |
 | Can you describe open flute vs.closed flute | 12/11/2017, 12:49 pm |
| Steve Russell | 12/11/2017, 12:03 pm |
| I'm looking for a lamp to turn.... | 12/11/2017, 7:01 am |
| Practice and throw it away | 12/11/2017, 4:10 am |
| Why I like the Hunter tools. *PIC* | 12/10/2017, 11:09 am |
| Been in the shop since 5am | 12/10/2017, 10:54 am |
| Cocobolo ban? | 12/9/2017, 3:19 pm |
| Australia, OT | 12/9/2017, 11:47 am |
| AAW Journal | 12/8/2017, 8:36 am |
| OT but funny- or maybe scary *NM* *LINK* | 12/7/2017, 6:42 pm |
| assorted stuff *PIC* | 12/7/2017, 3:39 pm |
| Too Many Mushrooms *PIC* | 12/7/2017, 12:53 pm |
| norfolk pines | 12/7/2017, 12:15 pm |
| OT Marital advice *PIC* | 12/7/2017, 9:24 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 12/6/2017, 3:31 pm |
| Question | 12/5/2017, 6:35 pm |
| Tool rest locking handle question | 12/4/2017, 5:49 pm |
| Padauk phenomena | 12/4/2017, 3:32 pm |
| Calling Clay Foster | 12/2/2017, 9:55 pm |
| An old video about me *LINK* | 12/2/2017, 7:13 pm |
| How to use the skew- good video *NM* *LINK* | 12/2/2017, 7:11 pm |
| Cutting board finish | 12/2/2017, 6:07 pm |
| Starting over | 12/2/2017, 1:07 am |
| 3520C PM | 12/1/2017, 4:19 pm |
| Time to replace tools | 12/1/2017, 12:30 pm |
| Walnut Oil Finish | 12/1/2017, 11:04 am |
| Micro motor recommendation | 11/30/2017, 1:20 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 11/29/2017, 5:23 pm |
| more on the SB Vortex tool | 11/29/2017, 3:40 pm |
| Nova banjo | 11/29/2017, 2:09 pm |
| The River took my Memories *PIC* | 11/29/2017, 8:22 am |
| New Member | 11/28/2017, 2:24 pm |
| Ever thought of making a woodturning video? *LINK* | 11/28/2017, 12:14 pm |
| Santa's Workshop *LINK* | 11/27/2017, 11:23 pm |
| Ambient air cleaner | 11/27/2017, 11:09 pm |
| Stewart Batty Vortex tool *LINK* | 11/27/2017, 6:51 pm |
| Cypress Hollow Form *PIC* | 11/26/2017, 6:04 pm |
| My shop smells like a medicine cabinet | 11/26/2017, 6:03 pm |
| Silicone Tool Protector | 11/26/2017, 12:30 pm |
| Need help finding..... *PIC* | 11/25/2017, 3:16 pm |
| Wand for Lindsay *PIC* | 11/24/2017, 8:28 pm |
| Rust in tail stock | 11/24/2017, 4:34 pm |
| Visit from a Saint today *PIC* | 11/24/2017, 1:38 pm |
| pine | 11/24/2017, 12:34 am |
| Happy Thanksgiving | 11/23/2017, 8:42 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 11/22/2017, 1:10 pm |
| JDS Air -Tech 750 ER | 11/22/2017, 12:57 pm |
| Grouting?? | 11/21/2017, 7:05 pm |
| Anybody know what wooden Cowboy hat sells for? | 11/21/2017, 6:05 pm |
| Daddy's fidget spinner-thought this was cute *NM* *LINK* | 11/21/2017, 8:32 am |
| Workshop Dust Collection | 11/20/2017, 11:36 am |
| water proof wood finish/stabalized wood follow up | 11/19/2017, 9:56 am |
| now I have to wear body armour to chainsaw *LINK* | 11/19/2017, 8:02 am |
| Flute Profiles of Bowl Gouges | 11/19/2017, 4:35 am |
| Demo | 11/18/2017, 8:31 pm |
| Of all the things I've had and lost..... | 11/18/2017, 8:18 pm |
| Jet Lathe Spindle | 11/18/2017, 7:27 pm |
| eyeglasses | 11/18/2017, 5:48 pm |
| stabalized wood source | 11/18/2017, 12:23 pm |
| A great video on a great lathe *LINK* | 11/17/2017, 7:33 pm |
| Shop floor is concrete (so far) | 11/16/2017, 1:16 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern | 11/15/2017, 3:03 pm |
| Grain filler | 11/15/2017, 10:59 am |
| this is what I need for my miniatures *PIC* | 11/14/2017, 6:56 pm |
| New Dust Collection technology from a lathe maker | 11/14/2017, 4:30 pm |
| enjoyable video *NM* *LINK* | 11/13/2017, 1:31 pm |
| Holly | 11/13/2017, 8:25 am |
| Great Weekend *LINK* | 11/12/2017, 9:06 pm |
| need to buy this guy a lathe *LINK* | 11/12/2017, 4:21 pm |
| Shear Scraping | 11/11/2017, 4:19 pm |
| Finish for Olive? *PIC* | 11/10/2017, 11:04 pm |
| November turnings-so far *PIC* | 11/10/2017, 2:09 pm |
| Carter Hollowing System | 11/10/2017, 12:22 pm |
| Connection to trees *LINK* | 11/9/2017, 11:32 pm |
| Inventory for 3 shows *PIC* | 11/9/2017, 10:56 pm |
| Little Penta bowl *PIC* | 11/9/2017, 8:59 pm |
| New kid on the block - Harvey Turbo T40 lathe *LINK* | 11/9/2017, 11:06 am |
| bowl and spindle gouge grinds *PIC* | 11/9/2017, 9:06 am |
| app for sketching, maybe pyrography? *LINK* | 11/9/2017, 12:11 am |
| Bottle Stoppers Getting Stuck | 11/8/2017, 3:58 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 11/8/2017, 3:19 pm |
| What is the actual max core you have taken with a | 11/8/2017, 12:51 pm |
| Don't need lathe tools just an angle grinder *NM* *LINK* | 11/5/2017, 7:54 pm |
| I don't need lathe tools, just a drill press *NM* *LINK* | 11/5/2017, 7:52 pm |
| deep hollow form tear out | 11/5/2017, 7:29 pm |
| Silence is golden...while turning wood *LINK* | 11/5/2017, 2:22 pm |
| Habemus tecton! *PIC* | 11/3/2017, 7:47 pm |
| An interesting accessory...... *PIC* | 11/3/2017, 3:56 pm |
| Seg-Easy Stop | 11/2/2017, 3:46 pm |
| A splash of primary colors in the shop........ *PIC* | 11/1/2017, 1:52 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern | 11/1/2017, 7:19 am |
| OT: Florida | 10/31/2017, 3:00 pm |
| NC Symposium | 10/30/2017, 11:45 pm |
| Ornaments *PIC* | 10/30/2017, 4:57 pm |
| KD platter blanks | 10/29/2017, 9:19 pm |
| Shop lighting for sale.... | 10/29/2017, 2:31 pm |
| Alternative collet chuck set..... *PIC* | 10/29/2017, 1:39 pm |
| Shop Lighting | 10/27/2017, 7:29 pm |
| 3520 powermatic lathe | 10/27/2017, 9:08 am |
| Shop Heating with propane | 10/27/2017, 7:56 am |
| Performax 16/32 Transport Belt Recommendations | 10/25/2017, 4:26 pm |
| head-band magnifiers | 10/25/2017, 1:08 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 10/25/2017, 11:57 am |
| Old Delta tailstock..... | 10/24/2017, 8:06 am |
| Location | 10/23/2017, 3:20 pm |
| food photography and new photo handout *LINK* | 10/23/2017, 7:39 am |
| ***WoodCentral's Birthday*** | 10/23/2017, 6:29 am |
| Stupid Question | 10/20/2017, 12:19 pm |
| Powermatic 3520B | 10/19/2017, 10:50 pm |
| Last Night's Chat | 10/19/2017, 8:52 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 10/18/2017, 4:35 pm |
| NC Woodturning Symposium | 10/18/2017, 1:22 pm |
| new ornaments with chain *PIC* | 10/17/2017, 7:24 am |
| Looking for Powermatic 45 banjo | 10/17/2017, 7:19 am |
| renovating Powermatic 3520B *LINK* | 10/16/2017, 8:31 pm |
| Post your woodturning signature *PIC* | 10/16/2017, 7:29 pm |
| General Woodworking Chat Tonight 9:30 p.m. EDT *NM* | 10/16/2017, 5:32 pm |
| home made mini lathe. *LINK* | 10/15/2017, 1:15 pm |
| Fidget Spinner al la Woodturning | 10/14/2017, 5:35 pm |
| Diamond card Lube and cleaning | 10/14/2017, 9:03 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern | 10/11/2017, 2:33 pm |
| Angle for scraper? | 10/10/2017, 1:38 pm |
| How to turn to a drawing *LINK* | 10/6/2017, 4:54 pm |
| Turning blanks for boxes | 10/5/2017, 7:53 pm |
| more ornaments finally *PIC* | 10/5/2017, 7:29 pm |
| not natural edge bowls *PIC* | 10/5/2017, 2:20 pm |
| A long overdue progress report *PIC* | 10/5/2017, 12:54 pm |
| More Photography | 10/4/2017, 5:31 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 10/4/2017, 2:05 pm |
| Threaded Ebony box *PIC* | 10/3/2017, 6:43 pm |
| OT - Las Vegas concert shooting and blood donation | 10/3/2017, 12:15 pm |
| Woodworking Chat Tonight Monday 9:30 p.m. E.D.T. *NM* | 10/2/2017, 5:38 pm |
| Get the more out of your lathe | 10/2/2017, 11:06 am |
| One Way 1236SD Lathe | 10/2/2017, 10:55 am |
| ***NEW SPONSOR :: HARVEY TOOLS*** *LINK* | 10/2/2017, 9:23 am |
| More Woodturning magazine *LINK* | 10/1/2017, 8:04 am |
| wow exchange at OVWG | 9/30/2017, 8:05 am |
| Hunter tool sharpness | 9/29/2017, 7:55 am |
| scrap wood, auction tools *PIC* | 9/28/2017, 5:54 pm |
| Now this is a lathe *NM* *LINK* | 9/27/2017, 4:21 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern | 9/27/2017, 12:06 pm |
| Question...... *PIC* | 9/25/2017, 3:04 pm |
| Good morning world | 9/25/2017, 8:49 am |
| A Robust Day | 9/23/2017, 3:24 pm |
| OT glasses repair *PIC* | 9/23/2017, 9:49 am |
| Glossy Dyed Tiger Maple *PIC* | 9/21/2017, 1:25 pm |
| Tonight's Chat | 9/20/2017, 9:49 pm |
| Thoughts on collet chucks...... | 9/20/2017, 7:40 pm |
| Two Jordans *PIC* | 9/20/2017, 2:58 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 9/20/2017, 12:22 pm |
| What are your woodturning lessons learned? | 9/19/2017, 3:17 pm |
| walnut tray *PIC* | 9/18/2017, 7:07 pm |
| More turned toys *PICs* | 9/17/2017, 3:39 pm |
| long thin spindles *PIC* | 9/17/2017, 2:10 pm |
| sanding innerface pads | 9/14/2017, 9:02 pm |
| Lidded Pot *PIC* | 9/14/2017, 6:01 pm |
| Pepper Mill *PIC* | 9/14/2017, 5:54 pm |
| this looks like fun *NM* *LINK* | 9/14/2017, 11:14 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 9/13/2017, 1:19 pm |
| captave bar *PIC* | 9/11/2017, 7:29 pm |
| Posting photos of your work | 9/11/2017, 7:03 pm |
| thread cutting with jigs | 9/11/2017, 7:00 pm |
| New commission | 9/11/2017, 6:57 pm |
| This is a special piece of wood........ *PIC* | 9/11/2017, 6:00 pm |
| Powermatic 90 motor options | 9/11/2017, 1:31 pm |
| Poor turning section, it's melting away! *NM* | 9/11/2017, 11:55 am |
| Tormek Sharapening | 9/7/2017, 7:44 pm |
| OT: Guitar Stuff for John Lucas *LINK* | 9/6/2017, 6:13 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern | 9/6/2017, 1:49 pm |
| CA glue debonder formula? | 9/5/2017, 10:33 am |
| Finally someone who uses a gouge *LINK* | 9/4/2017, 4:07 pm |
| Oneway 6" Faceplate | 9/2/2017, 11:51 pm |
| OT - old hands *PIC* | 9/1/2017, 3:33 pm |
| Metal spinning *LINK* | 9/1/2017, 9:44 am |
| off center vessel. *PIC* | 8/31/2017, 8:20 pm |
| Round but not brown *PIC* | 8/31/2017, 8:12 pm |
| Wet Sanding: Pros and Cons *LINK* | 8/31/2017, 6:57 pm |
| air dried black walnut bowl - wood wee bit soft | 8/31/2017, 10:09 am |
| Jamie-you've got your work cut out for you *NM* *LINK* | 8/30/2017, 2:59 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 8/30/2017, 2:00 pm |
| Daughter's Urn *PIC* | 8/29/2017, 4:31 pm |
| Hand Tool Chat Tonight, Tuesday 9:30 p.m. EDT *NM* | 8/29/2017, 3:12 pm |
| Hurricane Tools | 8/29/2017, 8:12 am |
| vases *PIC* | 8/28/2017, 7:43 pm |
| Bearing Replacement On A Jet 14" Lathe | 8/27/2017, 11:37 pm |
| Acrylic Hair Stick Blanks? | 8/27/2017, 12:47 pm |
| Goodbye General? | 8/26/2017, 8:29 pm |
| Parent company of Jet and Powermatic sold *LINK* | 8/25/2017, 6:53 pm |
| New model Powermatic ? | 8/25/2017, 6:19 pm |
| skew vs negative rake scraper | 8/25/2017, 11:39 am |
| Almost damaged a Hunter tool *PIC* | 8/24/2017, 7:39 pm |
| 4 boxes *PIC* | 8/24/2017, 5:32 pm |
| Turning wood and passage of time | 8/24/2017, 1:00 pm |
| another shocker *LINK* | 8/24/2017, 11:11 am |
| Speaking of Buffing? | 8/24/2017, 6:50 am |
| Buffing | 8/23/2017, 5:32 pm |
| Binh Pho | 8/23/2017, 5:25 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 8/23/2017, 3:11 pm |
| elipse mirror *PIC* | 8/23/2017, 11:25 am |
| Bowl Transituation | 8/22/2017, 1:52 pm |
| New Work-"Nightshade" *PIC* | 8/22/2017, 11:27 am |
| Eclipse fun *PIC* | 8/21/2017, 9:13 pm |
| Raffan style scoops | 8/21/2017, 11:45 am |
| New guy here *PIC* | 8/20/2017, 7:20 pm |
| Eclipse | 8/20/2017, 3:52 pm |
| Alligator Juniper Burl | 8/19/2017, 11:09 pm |
| selling tools | 8/19/2017, 1:13 pm |
| has anyone run across this before... | 8/18/2017, 4:41 pm |
| my first shop and lathe *PIC* | 8/18/2017, 11:38 am |
| Rose wood | 8/17/2017, 3:33 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 8/16/2017, 3:04 pm |
| Carbide Tools | 8/14/2017, 1:10 pm |
| Krylon matte finish question | 8/14/2017, 10:51 am |
| bandsaw tires | 8/13/2017, 1:15 pm |
| Steve Worcester Sycamore "Empty Bowls" Bowl. *PIC* | 8/11/2017, 3:17 pm |
| What a heartbreak | 8/11/2017, 9:10 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 8/9/2017, 4:12 pm |
| Turning Balsa | 8/8/2017, 9:41 am |
| MDF | 8/5/2017, 8:07 pm |
| Using vacuum to treat punky wood?? | 8/5/2017, 3:27 pm |
| Use of Lacquer/Thinner on punky wood | 8/5/2017, 2:17 pm |
| StreamFest - Live Streaming Woodturning | 8/5/2017, 1:05 pm |
| Storing chainsaws | 8/4/2017, 9:39 am |
| Tool handle I just finished *PIC* | 8/3/2017, 10:26 pm |
| Blue spruce root ball *PIC* | 8/2/2017, 7:27 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 8/2/2017, 3:00 pm |
| Burls | 8/2/2017, 11:20 am |
| 35 down/ 5 to go | 8/1/2017, 5:08 pm |
| PM 3520b Sale | 8/1/2017, 10:12 am |
| Curly ash *PIC* | 7/30/2017, 10:52 pm |
| Float Glass *PIC* | 7/30/2017, 7:53 pm |
| PM 4224 Tool Rest Lock Handle | 7/30/2017, 7:17 pm |
| PM 4224 On-Off | 7/30/2017, 11:02 am |
| double celtic knot wine stopper *PIC* | 7/28/2017, 10:39 am |
| Breast Cancer mirror *PIC* | 7/28/2017, 10:35 am |
| I do turn bowls *PIC* | 7/28/2017, 10:29 am |
| Tool sets I recommend *PIC* | 7/27/2017, 7:06 pm |
| "Speaking Worlds" | 7/26/2017, 4:40 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern | 7/26/2017, 3:51 pm |
| bowl turning | 7/25/2017, 7:53 pm |
| Bed extension for a JWL 1642 | 7/25/2017, 2:38 pm |
| A burl turning design question | 7/25/2017, 10:23 am |
| Bosch Carving stand - bench mount | 7/24/2017, 5:24 pm |
| Jet 1642 lathe | 7/22/2017, 9:37 am |
| "Turn for the market" used to be a ........ *PIC* | 7/21/2017, 4:31 pm |
| Best solvent for hot melt glue? | 7/21/2017, 12:30 pm |
| Here's a memory off my Facebook page *PIC* | 7/21/2017, 10:44 am |
| Removing wood finish from lathe. | 7/20/2017, 6:55 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 7/19/2017, 3:19 pm |
| wood care | 7/19/2017, 8:52 am |
| Need source for water holding kenzan | 7/18/2017, 6:08 pm |
| Moving Nova lathes - recommendations | 7/18/2017, 12:36 pm |
| 3d printer $279 | 7/17/2017, 1:54 pm |
| Photography Experiment and New Work *PIC* | 7/16/2017, 6:40 pm |
| Powermatic 3520B questions. | 7/16/2017, 1:00 pm |
| New work *PIC* | 7/13/2017, 11:48 pm |
| Custom Stubby lathe listed in classified *PIC* | 7/13/2017, 7:59 pm |
| Alaska Turners? | 7/12/2017, 4:13 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 7/12/2017, 12:58 pm |
| Hate taking out that pesky nib in bowl bottom? *PIC* | 7/11/2017, 11:52 pm |
| Love this T shirt about fidget spinners *NM* *LINK* | 7/11/2017, 4:30 pm |
| Two large bowls *PIC* | 7/11/2017, 10:11 am |
| Wood Threading Jig | 7/10/2017, 11:11 am |
| Time for some bling with a piece...... *PIC* | 7/9/2017, 4:15 pm |
| For you Segmenters *NM* *LINK* | 7/8/2017, 12:37 pm |
| OT chickens | 7/7/2017, 10:13 pm |
| bleaching with lye and peroxide | 7/7/2017, 3:52 pm |
| 2-part epoxy and honey do's.. | 7/6/2017, 6:08 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 7/5/2017, 4:37 pm |
| Black color ply mirror *PIC* | 7/4/2017, 9:56 am |
| spheres *PIC* | 7/4/2017, 9:55 am |
| Turned a few spindles *PIC* | 7/3/2017, 3:33 pm |
| Great workshop coming up *LINK* | 7/2/2017, 8:15 pm |
| a few mirrors *PIC* | 7/2/2017, 8:06 pm |
| Little spear off the lathe | 7/1/2017, 5:35 pm |
| OK, so this is a little esoteric... | 6/30/2017, 12:50 am |
| turning club in S FL | 6/28/2017, 3:38 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 6/28/2017, 3:30 pm |
| gallery commissions | 6/28/2017, 12:08 am |
| Making Fidget Spinners *PIC* | 6/27/2017, 8:01 pm |
| Turners in the OH, IN, TN area? | 6/25/2017, 1:39 pm |
| Lissi Oland | 6/24/2017, 2:37 pm |
| Near accident | 6/24/2017, 8:05 am |
| They use metal lathes for most of the lecture *NM* *LINK* | 6/23/2017, 6:42 pm |
| Any woodturners around Smoky Mountains? | 6/21/2017, 10:14 pm |
| Ogee bowl redu *PIC* | 6/21/2017, 7:22 pm |
| Celtic Knot ornaments *PIC* | 6/21/2017, 7:21 pm |
| Source for Vonax polishing compound? | 6/21/2017, 4:52 pm |
| Powermatic 3520b and 2020 Sale | 6/21/2017, 4:01 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern | 6/21/2017, 3:03 pm |
| Bocote from the wood stash,....... *PIC* | 6/21/2017, 12:16 pm |
| Question about early McNaughton *PIC* | 6/20/2017, 3:55 pm |
| Jet or Laguna | 6/19/2017, 10:44 pm |
| Ogee Walnut Box *PIC* | 6/19/2017, 10:14 pm |
| Trapping plane *PIC* | 6/19/2017, 8:47 pm |
| Another dive into the wood stash.... *PIC* | 6/19/2017, 11:48 am |
| Final Finishing suggestions for a burl box *PIC* | 6/17/2017, 4:14 pm |
| Beauty of wood in stop motion | 6/17/2017, 2:24 pm |
| Lathe, band saw, coring system in the classified | 6/17/2017, 6:50 am |
| 2nd Toy Top for ITSA *PICS* | 6/16/2017, 5:08 pm |
| Experiences with Bush Oil? | 6/16/2017, 12:07 pm |
| Woodtec lathes *LINK* | 6/15/2017, 3:04 pm |
| Speaking of spinning tops, as we...... *PIC* | 6/15/2017, 2:45 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 6/14/2017, 4:46 pm |
| Facebook Woodworking Group | 6/14/2017, 9:48 am |
| AAW Symposium next week... and a request | 6/14/2017, 8:05 am |
| Wood Spin Tops for the ITSA *PICS* *LINK* | 6/13/2017, 9:31 pm |
| I don't post work here often, but have been... *PIC* | 6/13/2017, 1:17 pm |
| my 'stuff'... *PIC* | 6/12/2017, 11:36 pm |
| trying to post pics of 'my stuff'.. but failing... | 6/11/2017, 6:49 pm |
| Urban Timber *PIC* | 6/10/2017, 8:19 am |
| I do like firewood *PIC* | 6/9/2017, 7:14 pm |
| My latest piece *PIC* | 6/8/2017, 9:15 pm |
| taking stuff to an art gallery | 6/8/2017, 2:11 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 6/7/2017, 2:05 pm |
| Turning chat tonight- beat you Stuart | 6/7/2017, 7:23 am |
| One big bowl *PIC* | 6/5/2017, 10:54 pm |
| Further on platform sharpening *PIC* | 6/5/2017, 12:44 pm |
| Aeronautical engineer needed *PIC* | 6/4/2017, 4:42 pm |
| it's a new morning, lets go turn | 6/4/2017, 7:21 am |
| Platform sharpening | 6/2/2017, 7:23 pm |
| Glaser Hitech vs JT Turning Tools?? | 6/1/2017, 7:33 am |
| Kinda OT Surprise snap *PIC* | 5/31/2017, 9:03 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 5/31/2017, 3:11 pm |
| Pen Disassembly | 5/31/2017, 1:21 pm |
| powermatic 3520A electrical problem | 5/31/2017, 9:32 am |
| Have two red oak burles would like selling price *NM* | 5/30/2017, 10:53 pm |
| Congratulations Clay Foster and Binh Pho | 5/30/2017, 8:39 pm |
| And we complain about lathe height *NM* *LINK* | 5/30/2017, 8:16 am |
| Product range of a Norwegian turning business | 5/30/2017, 8:01 am |
| Help please - Hosaluk Spatula Jig | 5/29/2017, 11:31 pm |
| Drilling brass (and some amazing videos) | 5/29/2017, 8:43 am |
| Box and bowl *PIC* | 5/29/2017, 8:11 am |
| very challenging skinny spindles *PIC* | 5/28/2017, 10:21 am |
| Bowl gouge grinds *PIC* | 5/27/2017, 8:21 am |
| Serious Bowl turning injury *PIC* | 5/26/2017, 10:42 am |
| Request for traditional grind photos | 5/25/2017, 2:30 pm |
| Gallery show Chestertown MD | 5/25/2017, 1:38 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 5/24/2017, 3:13 pm |
| Link Belts | 5/23/2017, 8:50 pm |
| AAW Policy on Fractal Burning | 5/23/2017, 4:45 pm |
| Drop Spindle Whorls *PIC* | 5/23/2017, 8:51 am |
| Sanding asymmetrical handles | 5/23/2017, 8:29 am |
| cold bend wood *PIC* | 5/23/2017, 8:00 am |
| Moving Shop | 5/22/2017, 6:29 pm |
| craftsman gouges *PIC* | 5/22/2017, 10:34 am |
| CNC Resources | 5/21/2017, 9:00 pm |
| outdoor finishes??? | 5/21/2017, 11:25 am |
| Ying Yang mirror with cold bend wood *PIC* | 5/20/2017, 8:18 pm |
| Zebra wood experiment *PIC* | 5/20/2017, 8:14 pm |
| smooth bowl radius *LINK* | 5/19/2017, 9:59 am |
| learning to use Trifocals | 5/19/2017, 9:40 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 5/17/2017, 9:00 pm |
| Server updates | 5/17/2017, 5:34 pm |
| Selling a lathe | 5/17/2017, 6:57 am |
| Important Hand Tool Chat Tonight 9:30 EDT | 5/16/2017, 3:18 pm |
| Articulated sanding arm | 5/15/2017, 11:28 pm |
| Finial or not? *PIC* | 5/15/2017, 4:37 pm |
| I'm going to get to play at the lathe | 5/14/2017, 7:38 am |
| Shop Class Safety *LINK* *PIC* | 5/13/2017, 11:27 pm |
| Fidget Spinners | 5/13/2017, 11:45 am |
| OT But not really *PIC* | 5/12/2017, 9:16 pm |
| Another 5/8" shaft capacity handle *PIC* | 5/11/2017, 9:24 pm |
| Ot simple joke | 5/11/2017, 2:16 pm |
| Switch going bad | 5/11/2017, 9:58 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern | 5/10/2017, 2:37 pm |
| YoYos | 5/10/2017, 11:12 am |
| looking for recommendations on lathes | 5/9/2017, 8:09 pm |
| Turing is like robotic surgery | 5/9/2017, 10:25 am |
| removable handle for scrapers | 5/8/2017, 3:57 pm |
| Looking for Lamp Design | 5/6/2017, 6:22 pm |
| found a source for mirror glass *LINK* | 5/5/2017, 10:07 pm |
| Foredom stand *PIC* | 5/5/2017, 5:51 pm |
| New roughing gouge, handle *PIC* | 5/5/2017, 4:47 pm |
| Wednesday Night Turning Chat -- Please Read | 5/3/2017, 2:08 pm |
| Blue Flex vs "Gray" Flex | 5/3/2017, 1:39 am |
| Setting up new shop | 5/2/2017, 4:08 pm |
| Some Days *PIC* | 5/1/2017, 5:10 pm |
| Some older pieces *PIC* | 4/30/2017, 10:28 am |
| Urn completed *PIC* | 4/27/2017, 9:56 am |
| Duxbury in Crossville | 4/27/2017, 8:37 am |
| Spalted Wood Trade *PIC* | 4/27/2017, 1:19 am |
| Suggestion on finishing a maple bowl? *PIC* | 4/27/2017, 1:05 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 4/26/2017, 12:20 pm |
| tips from our club *LINK* | 4/25/2017, 6:46 am |
| Woodworking gallery show coming up | 4/24/2017, 3:34 pm |
| Mark St.Leger in Knoxville *PIC* | 4/24/2017, 7:57 am |
| Urn questions | 4/22/2017, 11:11 pm |
| Nova DVR Upgrade panel and sudden starts | 4/22/2017, 7:40 pm |
| texturing | 4/22/2017, 11:57 am |
| My version of SEGEASY *PIC* | 4/21/2017, 3:31 pm |
| Just when you think you've seen it all... *LINK* | 4/21/2017, 11:07 am |
| Dancing Kokopelli's *PIC* | 4/20/2017, 3:05 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 4/19/2017, 3:05 pm |
| Hand Tool Discussion Tonight, Tues., 9:30 p.m. EDT *LINK* | 4/18/2017, 11:25 am |
| Loose Banjo | 4/18/2017, 10:54 am |
| Drying Wood | 4/17/2017, 4:34 pm |
| carved bowls site | 4/17/2017, 1:54 pm |
| call me crazy... | 4/17/2017, 12:42 am |
| Galaxy planet mirror *PIC* | 4/16/2017, 6:35 pm |
| bad news *LINK* | 4/15/2017, 7:17 pm |
| Crown Revolution | 4/13/2017, 1:54 pm |
| This just in!!!! *PIC* | 4/12/2017, 4:14 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 4/12/2017, 1:56 pm |
| New T SHIRT | 4/12/2017, 7:19 am |
| Hand Tool Chat Tonight 9:30 p.m. EDT | 4/11/2017, 2:06 pm |
| Speaking of Air Filtration..... | 4/11/2017, 12:36 pm |
| Mounting Jet air filtration unit | 4/10/2017, 9:20 am |
| Decades old wood color *PIC* | 4/9/2017, 1:11 pm |
| Entertaining a crowd | 4/8/2017, 11:39 pm |
| A little playing-more mirrors *PIC* | 4/8/2017, 8:48 pm |
| Band Saw Upgrade Problem | 4/8/2017, 1:18 pm |
| Master turner | 4/8/2017, 8:38 am |
| Flame Elder, Brenham, Austin, BCS, Houston | 4/7/2017, 7:23 pm |
| transtint prices | 4/7/2017, 2:59 pm |
| CA burns | 4/6/2017, 8:15 am |
| I Missed the Derek Weidman Demo! | 4/6/2017, 3:02 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 4/5/2017, 4:08 pm |
| Wolverine/Vari grind help | 4/5/2017, 12:47 pm |
| Help Needed ... | 4/4/2017, 6:25 pm |
| Skew vs Hunter Osprey vs EZ tools *PIC* | 4/4/2017, 6:10 pm |
| JL post | 4/4/2017, 11:30 am |
| Bevel rubbing vs scraping *PIC* | 4/3/2017, 4:17 pm |
| Anatomy of a Lathe video - AAW Discover Woodturnin | 4/3/2017, 2:39 pm |
| epoxy test *PIC* | 4/2/2017, 7:51 pm |
| sunlight resistant or not? | 4/2/2017, 6:46 pm |
| turning with bevel rubbing tools | 4/2/2017, 7:28 am |
| Slow Motion Gravity | 4/1/2017, 1:12 pm |
| Fingertip Top | 4/1/2017, 12:19 pm |
| Eulers Disk | 4/1/2017, 12:05 pm |
| Drunken Ball | 4/1/2017, 11:44 am |
| I've just added something to my wish list! *LINK* | 4/1/2017, 11:09 am |
| Swing increase on Rikon Midi lathe | 4/1/2017, 2:31 am |
| Off to Saratoga | 3/31/2017, 8:33 pm |
| Kururin Toy | 3/31/2017, 6:29 pm |
| Carba-tec Threadmaster | 3/31/2017, 6:15 pm |
| color question *PIC* | 3/31/2017, 2:29 am |
| Sphere with coil | 3/30/2017, 7:59 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 3/29/2017, 2:05 pm |
| Is Your Bucket Half Full or Half Empty? | 3/28/2017, 8:21 am |
| Lightning and neutral wire question | 3/27/2017, 4:06 pm |
| finishing box elder | 3/26/2017, 8:23 pm |
| A few tricks you may not have seen *PIC* | 3/26/2017, 4:10 pm |
| Finishing spalted maple bowl | 3/26/2017, 8:42 am |
| OK I'm going to have to run an epoxy test *LINK* | 3/25/2017, 8:06 am |
| Repairing Robust Tool Rest | 3/24/2017, 6:17 pm |
| OT:TryingToContactHarvey | 3/23/2017, 1:24 am |
| Helpful Philosophy *LINK* | 3/22/2017, 10:45 pm |
| Oneway tool handle | 3/22/2017, 7:44 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern | 3/22/2017, 3:11 pm |
| lathe moving question | 3/21/2017, 6:39 pm |
| Seed Pod *PIC* | 3/21/2017, 4:24 pm |
| Hand Tool Bucket List Discussion | 3/21/2017, 1:58 pm |
| Burl in Resin Turning Blanks *PIC* | 3/21/2017, 1:55 pm |
| for you mathmeticians *LINK* | 3/21/2017, 8:11 am |
| I'm working at carving a Silver Maple bowl, | 3/19/2017, 9:36 pm |
| a little tip | 3/19/2017, 7:43 pm |
| Air compressor | 3/19/2017, 12:36 pm |
| *** SURVEY: THE IDES OF MARCH *** | 3/19/2017, 10:52 am |
| humbling experience with skew | 3/18/2017, 8:46 pm |
| Oven rack push/pull *PIC* | 3/18/2017, 8:31 pm |
| Mirrors for Nurses *PIC* | 3/18/2017, 8:28 pm |
| Beads of Courage boxes *PIC* | 3/18/2017, 8:24 pm |
| NWA Store Items *LINK* *PIC* | 3/18/2017, 8:08 pm |
| "Forever Autumn" *PIC* | 3/17/2017, 10:30 pm |
| Cheap Sharpening System | 3/17/2017, 5:46 pm |
| for you guitar buffs *NM* *LINK* | 3/17/2017, 3:54 am |
| Cleaning up after hollowing *PIC* | 3/16/2017, 5:37 pm |
| Having fun turning | 3/15/2017, 7:30 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 3/15/2017, 3:34 pm |
| Mike Darlow on chasing threads | 3/12/2017, 3:13 pm |
| Lamp shade turning tools | 3/12/2017, 2:17 pm |
| Incannel ground detail gouge. | 3/12/2017, 1:05 pm |
| Thank you John C. Lucas | 3/11/2017, 11:23 am |
| three -d carving on a HF | 3/10/2017, 4:30 am |
| Pen Turning's Tower Of Babel | 3/9/2017, 5:56 pm |
| Thanks! *LINK* *PIC* | 3/8/2017, 9:31 pm |
| Whistle key chains | 3/8/2017, 2:16 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 3/8/2017, 2:08 pm |
| sharpening spindle gouges *PIC* | 3/7/2017, 12:00 pm |
| Wheels | 3/6/2017, 6:43 pm |
| What are we guarding? | 3/6/2017, 5:57 pm |
| Any turners in the Ramos/Saltillo Mexico area ? | 3/6/2017, 4:29 pm |
| Ellsworth on woodturning | 3/6/2017, 9:52 am |
| The hardest wood I've ever tried to turn | 3/4/2017, 10:46 pm |
| Can't turn right now | 3/4/2017, 2:44 pm |
| 2017 solar eclipse | 3/4/2017, 2:39 pm |
| Metal Effects | 3/4/2017, 11:24 am |
| Bowls for beans *LINK* | 3/2/2017, 2:26 pm |
| flat bevel versus hollow grind | 3/2/2017, 8:38 am |
| question for Keith Tompkins | 3/2/2017, 2:00 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 3/1/2017, 4:09 pm |
| Tornados | 3/1/2017, 1:10 pm |
| tornadoes tonight snow in the morning | 2/28/2017, 10:03 pm |
| white glue causing warpage? | 2/28/2017, 7:28 pm |
| [AD] JET sale, March 3 - 6, at Klingspor! *LINK* *PIC* | 2/28/2017, 9:28 am |
| turkeys (not you woodturners) *PIC* | 2/26/2017, 7:10 pm |
| off topic- a little | 2/26/2017, 7:01 pm |
| bois d'arc box *PIC* | 2/26/2017, 2:37 pm |
| Need some help for our club. | 2/26/2017, 2:18 pm |
| Rikon Mini Belt ? | 2/26/2017, 10:44 am |
| Nova Cole Jaws | 2/25/2017, 9:18 pm |
| Turners are just the best kind of people..... | 2/25/2017, 12:22 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 2/22/2017, 3:28 pm |
| Hand Tool Chat Tonight Tuesday 9:30 pm EST *NM* | 2/21/2017, 1:25 pm |
| threaded lid container *PIC* | 2/19/2017, 6:42 pm |
| Tree Identification | 2/18/2017, 5:16 pm |
| Jaw screws | 2/16/2017, 9:39 pm |
| Big clock done *PIC* | 2/15/2017, 7:00 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 2/15/2017, 4:08 pm |
| Using DNA to reduce drying time of green wood | 2/15/2017, 2:03 pm |
| Delta 46-460 Speed Control | 2/14/2017, 7:47 pm |
| PSA Powermatic Model 90 Lathe - $500 *LINK* | 2/14/2017, 9:13 am |
| Oregon Woodturning Symposium | 2/13/2017, 2:17 pm |
| Push cut vs pull cut *LINK* | 2/11/2017, 7:10 am |
| Passing of a friend | 2/11/2017, 7:06 am |
| Nick Agar's Silver Paste | 2/10/2017, 3:53 pm |
| Need proof about how many know your personal info | 2/9/2017, 7:10 pm |
| clock turnings *PIC* | 2/9/2017, 6:06 pm |
| Request for information about wood toxicity | 2/9/2017, 11:46 am |
| Why do they still make spindle gouges? | 2/9/2017, 10:37 am |
| American Elm | 2/8/2017, 7:20 pm |
| Time off | 2/8/2017, 6:11 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 2/8/2017, 2:50 pm |
| Making a tenon | 2/8/2017, 1:28 pm |
| Still working on the clock *PIC* | 2/7/2017, 7:10 pm |
| maple bowl *PIC* | 2/4/2017, 10:21 am |
| Need Inspiration for Gift | 2/3/2017, 5:48 pm |
| carved moulding *PIC* | 2/2/2017, 11:16 am |
| Fidget Spinner *LINK* | 2/1/2017, 9:02 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 2/1/2017, 2:51 pm |
| Thompson negative rake scraper *PIC* | 2/1/2017, 8:47 am |
| miniature carving *PIC* | 2/1/2017, 8:28 am |
| Got my new American Woodturner today... | 1/31/2017, 6:40 pm |
| Hand Tool Chat, Tonight, Tuesday, 9:30 p.m. E.S.T. | 1/31/2017, 3:55 pm |
| Goblets *PIC* | 1/30/2017, 8:32 pm |
| boxes *PIC* | 1/30/2017, 8:29 pm |
| Totally Turning 2017 *LINK* | 1/30/2017, 10:15 am |
| rolling pin | 1/30/2017, 9:54 am |
| Link Belts? | 1/28/2017, 10:03 am |
| Panic | 1/26/2017, 2:07 pm |
| Experience with a Robinair Vacuum Pump | 1/26/2017, 7:47 am |
| Heading to the TAW symposium | 1/26/2017, 6:17 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 1/25/2017, 3:45 pm |
| Spalted Dogwood | 1/25/2017, 11:41 am |
| Wednesday morning tip *PIC* | 1/25/2017, 9:48 am |
| Hammy The Cat *PIC* | 1/24/2017, 2:23 pm |
| Bowl Gouges For Sale *PIC* | 1/23/2017, 3:40 pm |
| Turning green blanks | 1/23/2017, 12:08 pm |
| Hose Clamps for segment glue ups | 1/23/2017, 11:29 am |
| Sharpening Help | 1/22/2017, 12:54 pm |
| Vacuum Pump Availability *LINK* | 1/20/2017, 10:56 pm |
| Been playing again. *PIC* | 1/20/2017, 6:44 pm |
| Mustard Monster | 1/20/2017, 6:12 pm |
| Bloodwood | 1/20/2017, 12:19 pm |
| dropped a miniature mirror in the shavings | 1/19/2017, 7:32 pm |
| *** Gallery Update *** *LINK* | 1/19/2017, 1:30 pm |
| Working on a new article | 1/19/2017, 11:14 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern | 1/18/2017, 3:42 pm |
| stupid injury | 1/18/2017, 9:02 am |
| laser edge finder *PIC* | 1/17/2017, 6:51 pm |
| interesting problem *PIC* | 1/17/2017, 2:25 pm |
| Making epoxy more Viscous *PIC* | 1/17/2017, 12:04 pm |
| sanding disks | 1/16/2017, 5:08 pm |
| Tagua nut turning *PIC* | 1/15/2017, 7:31 pm |
| Tagua nut source | 1/14/2017, 5:18 pm |
| Dust collector woes | 1/14/2017, 2:35 pm |
| Glasser bowl gouge | 1/14/2017, 11:09 am |
| Liquid Amber *PIC* | 1/13/2017, 9:57 pm |
| unusual mirrors *PIC* | 1/13/2017, 7:23 pm |
| gouge for rouging large bowls | 1/13/2017, 1:05 pm |
| On of those mornings | 1/12/2017, 10:06 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 1/11/2017, 4:24 pm |
| A bit more than I can chew... *PIC* | 1/11/2017, 10:56 am |
| Lathe accessory, Sub-faceplate balance ring? | 1/11/2017, 9:42 am |
| seriously offset turning *PIC* | 1/10/2017, 6:44 pm |
| HELP!!! I need Woodturner jokes!! *OT* (sort of) *LINK* | 1/9/2017, 7:18 pm |
| I've entered the secondary market! LOL *PIC* | 1/9/2017, 11:02 am |
| Laminating is fun | 1/8/2017, 10:15 pm |
| Glow Throw-Top...round 2 | 1/8/2017, 4:40 pm |
| Been busy- more mirrors *PIC* | 1/7/2017, 7:59 pm |
| Thor's Cup *PIC* | 1/7/2017, 10:12 am |
| Saw This | 1/6/2017, 1:07 pm |
| Nova 1624 | 1/5/2017, 3:27 pm |
| Craftsman tool brand sold to Black and Decker | 1/5/2017, 11:33 am |
| Battery powered, dust respirator / face shield? | 1/5/2017, 11:01 am |
| Norway Maple Salad Bowl *PIC* | 1/4/2017, 7:02 pm |
| cyanoacrylate glue | 1/4/2017, 4:21 pm |
| Eat your heart out Jamie D *PIC* | 1/4/2017, 3:14 pm |
| latest mirrors *PIC* | 1/4/2017, 3:13 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 1/4/2017, 1:05 pm |
| the Bowl Digger | 1/3/2017, 1:31 pm |
| Wacky VFD controller on PM 3520 | 1/3/2017, 11:06 am |
| Nova DVR 2024 | 1/3/2017, 9:11 am |
| Woddturned Cherry Projects Finally Finished *PIC* | 1/3/2017, 1:53 am |
| Screw Chuck question? | 1/2/2017, 8:06 am |
| Artist's Pallet *PIC* | 1/1/2017, 2:25 pm |
| Sphere Of Influences *PIC* | 1/1/2017, 2:18 pm |
| ***HAPPY NEW YEAR!*** | 1/1/2017, 3:01 am |
| St Louis woodturners | 12/31/2016, 7:23 pm |
| Happy New Year to everyone *NM* | 12/31/2016, 7:02 pm |
| offset turning *LINK* | 12/31/2016, 11:55 am |
| Thanks Barry, Jamie, John and Dick | 12/30/2016, 5:11 pm |
| Sanding sealer ?????? | 12/30/2016, 1:20 pm |
| Question for Tormek users | 12/30/2016, 9:04 am |
| started new mirrors *PIC* | 12/30/2016, 8:54 am |
| Negative rake thread chaser *PIC* | 12/28/2016, 4:22 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 12/28/2016, 12:39 pm |
| OT Mountain biking west Tn or east Mo? | 12/28/2016, 11:54 am |
| OT slab from a tree *LINK* | 12/28/2016, 11:27 am |
| priority changing | 12/28/2016, 8:47 am |
| Very hard wood | 12/26/2016, 1:22 pm |
| Looking at larger chucks. | 12/25/2016, 10:26 pm |
| MERRY CHRISTMAS | 12/25/2016, 8:27 am |
| HO HO HO | 12/24/2016, 11:13 pm |
| OT- a little fun with Jim Stafford *NM* *LINK* | 12/23/2016, 3:30 pm |
| Sources for Blanks | 12/22/2016, 12:10 pm |
| Interesting drive center | 12/21/2016, 10:01 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 12/21/2016, 3:23 pm |
| 2nd worse comment you can get on a commission | 12/21/2016, 2:10 pm |
| PM Spindle locking collar | 12/21/2016, 12:23 pm |
| pencil lead carving *LINK* | 12/21/2016, 7:45 am |
| Hand Tool Chat Tonight Tuesday 9:30 p.m. EST | 12/20/2016, 3:09 pm |
| jet lathe shorting out | 12/18/2016, 1:06 pm |
| Demonstrators | 12/18/2016, 11:29 am |
| Duck call needed | 12/16/2016, 8:15 pm |
| Turning For Ellen DeGeneres ??? *LINK* | 12/15/2016, 2:55 pm |
| American Woodturning-Use of Technology | 12/14/2016, 4:19 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 12/14/2016, 12:10 pm |
| Hand Tool Chat Tonight 9:30 p.m. EST *NM* | 12/13/2016, 12:36 pm |
| sharpening broken down to the basics *LINK* | 12/12/2016, 11:26 am |
| Large Wood Sphere | 12/11/2016, 11:45 am |
| Thoughts about rotary carving and burrs | 12/11/2016, 10:21 am |
| Looking for a video. Slightly OT | 12/9/2016, 11:17 am |
| Segmented Bowls | 12/7/2016, 5:28 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 12/7/2016, 3:56 pm |
| Pearl Harbor Day | 12/7/2016, 9:18 am |
| Galaxy mirror 2 *PIC* | 12/6/2016, 11:04 am |
| Rain rain glorious rain | 12/6/2016, 7:26 am |
| Turning Acrylic | 12/4/2016, 8:57 pm |
| Very old piece *PIC* | 12/4/2016, 4:23 pm |
| (OT) Extending the bicycling season *PIC* | 12/4/2016, 4:00 pm |
| Gizmos, gadgets, tools, inventions | 12/4/2016, 7:46 am |
| Return policy | 12/3/2016, 7:06 am |
| More on Angle Grinders *LINK* | 12/2/2016, 6:41 pm |
| OT- Scottland has it right *LINK* | 12/2/2016, 6:24 pm |
| Fun Video if you like big bowls. *NM* *LINK* | 12/2/2016, 3:06 pm |
| Garden tools finish | 12/1/2016, 2:24 pm |
| Chucks | 12/1/2016, 10:22 am |
| Rebuilding Arrowmont | 12/1/2016, 8:32 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 11/30/2016, 3:14 pm |
| locking collar for PM 3530a | 11/30/2016, 1:10 pm |
| Hand Tool Chat Tonight 9:30 p.m. EST | 11/29/2016, 11:30 am |
| Post on Facebook, Arrowmont is burning *PIC* | 11/28/2016, 11:56 pm |
| Thoughts on using treadmill motor to power a lathe | 11/28/2016, 11:19 pm |
| Another Glow Top *PICS* *VID* | 11/28/2016, 9:50 pm |
| More square ornaments. *PIC* | 11/28/2016, 7:39 pm |
| I haven't made a decorative turning in .......... *PIC* | 11/27/2016, 3:34 pm |
| Very nice segmented bowl and video *LINK* | 11/27/2016, 7:49 am |
| Hi | 11/27/2016, 12:12 am |
| Ornaments for the Children's Hospital | 11/26/2016, 7:45 pm |
| Faux-stone in turnings | 11/25/2016, 5:31 pm |
| OT - Turkey(s) *PIC* | 11/24/2016, 3:55 pm |
| Happy Thanksgiving folks! *NM* | 11/24/2016, 12:01 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern | 11/23/2016, 3:23 pm |
| unbalanced workpieces | 11/21/2016, 3:06 pm |
| Last Call For Secret Santa | 11/20/2016, 3:27 pm |
| Sometimes it really works *updated with big pix* *PIC* | 11/20/2016, 10:11 am |
| Something completely new and different... | 11/19/2016, 7:40 pm |
| [AD] BIG Lathe for Sale | 11/19/2016, 4:59 pm |
| Let's hear it for the face shield.... | 11/19/2016, 4:28 pm |
| Here's what I've been waiting for...*PICS* | 11/18/2016, 10:22 pm |
| How many will I make tomorrow? | 11/18/2016, 5:17 pm |
| Thanks to John Lucas fr posting Turning Video | 11/18/2016, 3:36 pm |
| Inspired by John Lucas *PIC* | 11/17/2016, 10:49 pm |
| Latest Piece *PIC* | 11/17/2016, 10:33 pm |
| Clock repair *PIC* | 11/17/2016, 6:53 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 11/16/2016, 3:19 pm |
| Amazing segmented turnings | 11/16/2016, 2:20 pm |
| Lamp is too bright *LINK* *PIC* | 11/16/2016, 8:58 am |
| My New "Animal" Series Spintops *PICS* | 11/15/2016, 11:56 pm |
| Hand Tool Chat Tonight 9:30 p.m. EST *NM* | 11/15/2016, 9:04 am |
| latest work *PIC* | 11/15/2016, 12:49 am |
| Xmas Ornaments *PIC* | 11/14/2016, 6:04 pm |
| ring stand box *PIC* | 11/12/2016, 7:55 pm |
| Gift ornaments *PIC* | 11/12/2016, 7:54 pm |
| What finish to use on goblets? | 11/12/2016, 7:44 am |
| Ed's Spinning Top videos *LINK* | 11/11/2016, 8:53 am |
| Rikon 1hp grinder toolrest size | 11/11/2016, 8:05 am |
| Stewart Batty 40/40 grind with Wolverine jig *PIC* | 11/10/2016, 5:00 pm |
| First Ever...I think *LINK* | 11/10/2016, 12:52 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 11/9/2016, 4:32 pm |
| Hand Tool Chat This Evening 9:30 p.m. EST *NM* | 11/8/2016, 12:29 pm |
| Ring Bowl *PIC* | 11/7/2016, 9:38 pm |
| Best bowl finish that will not darken wood | 11/7/2016, 8:40 am |
| Anybody want a Racal Gas Mask? | 11/6/2016, 3:19 pm |
| Vega lathe | 11/5/2016, 9:51 pm |
| turned a funnel box today | 11/5/2016, 7:46 pm |
| AAW journal back issues | 11/5/2016, 7:34 pm |
| new mirrors *PIC* | 11/4/2016, 7:16 pm |
| Frank Sudol's boring bar system.... | 11/4/2016, 7:15 pm |
| Any one know what happend to New Edge | 11/3/2016, 10:27 am |
| Drilling Concentric holes | 11/2/2016, 5:00 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 11/2/2016, 1:54 pm |
| Processional torch parts | 11/2/2016, 12:07 pm |
| Compact right angle drill for power sanding? | 11/2/2016, 1:00 am |
| Hand Tool Chat This Evening, Tuesday 9:30 p.m. EDT *NM* | 11/1/2016, 5:55 pm |
| WoodCentral Secret Santa | 11/1/2016, 8:39 am |
| confusion | 10/31/2016, 6:21 pm |
| Happy Halloween | 10/31/2016, 5:46 pm |
| Long shot wood search | 10/30/2016, 3:07 pm |
| Could my 3520B be possessed? Code F-100 | 10/30/2016, 12:10 am |
| Delta 28-276 Bandsaw Parts | 10/28/2016, 9:48 pm |
| pdf file | 10/28/2016, 5:20 pm |
| Brush marks in finished work | 10/28/2016, 11:09 am |
| How big do you turn | 10/28/2016, 8:12 am |
| The Galaxy mirror *PIC* | 10/27/2016, 7:23 pm |
| Advice on motor and VFD for antique lathe | 10/26/2016, 9:45 pm |
| Turning Chat Tonight, Wednesday ~9:30 p.m. EDT | 10/26/2016, 12:31 pm |
| Number 1 | 10/25/2016, 12:34 pm |
| Hand Tool Chat This Evening, Tuesday 9:30 p.m. EDT *NM* | 10/25/2016, 10:52 am |
| General Woodworking Chat Tonight, 9:30 p.m. E.D.T. *NM* | 10/24/2016, 12:56 pm |
| Cleaning Chucks | 10/24/2016, 9:54 am |
| square routed ornament. *PIC* | 10/23/2016, 7:56 pm |
| Tailstock question | 10/23/2016, 7:23 pm |
| So what have you been doing? | 10/23/2016, 4:15 pm |
| Magnolia Wood | 10/20/2016, 8:50 pm |
| Tree crotches for turning | 10/20/2016, 1:40 pm |
| Ways to stop green blanks from growing mold??? | 10/19/2016, 11:38 pm |
| spider *PIC* | 10/19/2016, 8:18 pm |
| square ornaments *PIC* | 10/19/2016, 8:17 pm |
| 6 sided screw lid box *PIC* | 10/19/2016, 8:15 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 10/19/2016, 3:14 pm |
| New spin-tops | 10/19/2016, 12:26 am |
| We turners don't even know what sharp is *NM* *LINK* | 10/18/2016, 9:51 pm |
| demo and Hands On in Traverse City, MI *PIC* | 10/18/2016, 9:14 pm |
| 3 hour class | 10/18/2016, 2:58 pm |
| Idea for next year, maybe AAW competition or WC? | 10/18/2016, 12:22 pm |
| Hand Tool Chat This Evening, Tuesday 9:30 p.m. EDT *NM* | 10/18/2016, 12:11 pm |
| 1st two bowls off my lathe *PIC* | 10/17/2016, 9:56 pm |
| Why does buffinv hurt my bsck | 10/16/2016, 12:22 pm |
| "stop woodturning; just plane" | 10/15/2016, 11:58 am |
| Wood Tool Parts | 10/15/2016, 11:42 am |
| Building club library | 10/12/2016, 7:56 pm |
| A question for those who buy burls???? | 10/12/2016, 5:23 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 10/12/2016, 4:30 pm |
| Teaching Turning and the use of chucks | 10/12/2016, 4:12 pm |
| Hand Tool Chat This Evening, Tuesday 9:30 p.m. EDT | 10/11/2016, 2:13 pm |
| projects for my classes at the Craft Center *PIC* | 10/10/2016, 6:56 pm |
| Interesting video on using the skew *LINK* | 10/10/2016, 5:24 am |
| Apple Wood turns into Pine Wood | 10/9/2016, 12:55 pm |
| McNaughton Tool Post | 10/8/2016, 2:44 pm |
| Airshield pro | 10/8/2016, 10:29 am |
| segmented ornaments *PIC* | 10/7/2016, 7:35 pm |
| Laser Guide for Lathe | 10/7/2016, 2:24 pm |
| Right angle drill *LINK* | 10/7/2016, 11:01 am |
| PM 3520B: replaced inverter, still not working | 10/6/2016, 8:59 pm |
| Dremel repair *PIC* | 10/6/2016, 1:52 pm |
| Extraordinary figure in hollow trees? | 10/6/2016, 10:37 am |
| Very unusual Red Maple Tree *PIC* | 10/6/2016, 1:33 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 10/5/2016, 3:42 pm |
| Electric Motor vs. Magnetic Tool Tray | 10/5/2016, 1:14 pm |
| large carving *PIC* | 10/4/2016, 6:57 pm |
| Jet 1236 Lathe won't stay running | 10/3/2016, 8:12 pm |
| Mahoney Walnut Oil | 10/3/2016, 12:20 pm |
| Some new ideas *PIC* | 10/1/2016, 1:38 pm |
| need vacuum pump advise | 10/1/2016, 6:35 am |
| Tomorrow is the last chance to renew | 9/29/2016, 1:38 pm |
| 3520b storage cabinet? | 9/29/2016, 11:33 am |
| Very fun- using odd cutting tools *LINK* | 9/29/2016, 8:45 am |
| Jamie- who needs a Porche *NM* *LINK* | 9/29/2016, 6:42 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 9/28/2016, 4:42 pm |
| OT:Minwax Wood Finish | 9/28/2016, 11:35 am |
| aiming the bevel *LINK* | 9/27/2016, 10:25 am |
| Hand Tool Chat This Evening 9:30 p.m. EDT *NM* | 9/27/2016, 6:39 am |
| Enhanced staining color | 9/26/2016, 8:52 pm |
| Beads of Courage Bowls | 9/26/2016, 5:48 am |
| Hugh McKay Hollower Tool | 9/25/2016, 5:23 pm |
| Spheres and cup centers - Pen turning related | 9/25/2016, 1:05 pm |
| An Easier Celtic Knot *LINK* | 9/23/2016, 2:16 pm |
| 13ft chainsaw!! cutting old salvaged redwood | 9/23/2016, 12:23 pm |
| Anyone going to the first mid-Atlantic symposium? | 9/22/2016, 7:30 pm |
| 3520b lathe is home | 9/20/2016, 9:51 pm |
| Hand Tool Chat, Tonight, Tuesday, 9:30 EDT *NM* | 9/20/2016, 6:21 pm |
| Hawaii Wood Show | 9/20/2016, 8:58 am |
| OT: serious slight of hand *LINK* | 9/19/2016, 10:10 pm |
| Taper Shank drill bits *PIC* | 9/19/2016, 4:28 pm |
| bought a 3520b | 9/18/2016, 11:20 pm |
| Turning Mirrors with John Lucas *PIC* | 9/18/2016, 8:15 pm |
| Wood Score *PIC* | 9/18/2016, 8:06 pm |
| OT Rough week for reality TV guys | 9/18/2016, 12:51 am |
| New bar a chain to deal with large maple *PIC* | 9/16/2016, 11:41 pm |
| Sanding Pen Tubes | 9/16/2016, 5:20 pm |
| Piercing tools | 9/12/2016, 9:43 pm |
| One day classes- what to teach | 9/12/2016, 6:28 pm |
| Bigger Basket Illusion *PIC* | 9/12/2016, 6:02 pm |
| Chainsaw envy! | 9/12/2016, 4:47 pm |
| Walnut Shelf | 9/12/2016, 3:33 pm |
| Nova Lathe 3000 Upgrade | 9/12/2016, 10:38 am |
| Natural edge box with the bark as lid | 9/11/2016, 9:30 pm |
| Don't Come Closer with that Chain Saw! *PIC* | 9/10/2016, 6:10 pm |
| radio noise | 9/9/2016, 11:33 am |
| mounting a piece on a base | 9/8/2016, 1:14 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 9/7/2016, 1:35 pm |
| AAW Forum Hacked? | 9/7/2016, 1:29 pm |
| Carnauba wax | 9/6/2016, 11:35 pm |
| Inside out Mirror *PIC* | 9/6/2016, 6:31 pm |
| Speaking of spheres... *LINK* | 9/6/2016, 4:24 pm |
| 3520B Banjo | 9/5/2016, 8:33 pm |
| My favorite cherry tree *LINK* *PIC* | 9/4/2016, 4:37 pm |
| need sandpaper storage unit *PIC* | 9/3/2016, 2:00 pm |
| Basket Illusion Revisited. *PIC* | 9/3/2016, 12:33 pm |
| Ni-chrom wire | 9/2/2016, 4:19 pm |
| off center turning *LINK* | 9/2/2016, 3:59 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 8/31/2016, 2:53 pm |
| Finally doing something besides bicycle riding *PIC* | 8/31/2016, 1:46 pm |
| August turnings *PIC* | 8/31/2016, 12:43 pm |
| Dog bowl vs good bowl *PIC* | 8/31/2016, 8:46 am |
| New Ornament - Inspired by John Lucas *PIC* | 8/30/2016, 5:50 pm |
| Eureka | 8/30/2016, 5:43 pm |
| Why is it | 8/30/2016, 4:28 pm |
| Hand Tool Chat Tonight | 8/30/2016, 2:06 pm |
| At your own risk...an idea for surface treatment *LINK* | 8/30/2016, 1:00 pm |
| Went to SWAT | 8/30/2016, 12:47 am |
| Crazy project *PIC* | 8/29/2016, 10:16 pm |
| Great publicity for our club | 8/28/2016, 2:57 pm |
| I've been busy lately *PIC* | 8/26/2016, 8:08 am |
| looking at a new lathe | 8/25/2016, 5:20 pm |
| A voice from the past | 8/25/2016, 2:41 pm |
| if you're at swat... | 8/25/2016, 1:39 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 8/24/2016, 1:20 pm |
| David Marks Turning Large Vessel *LINK* | 8/22/2016, 9:42 pm |
| Screw choice for END-GRAIN Bradford Pear? | 8/20/2016, 7:59 pm |
| OT for you archers *LINK* | 8/20/2016, 7:51 pm |
| Turning colored acrylic *PIC* | 8/20/2016, 3:55 pm |
| Carving with just a little turning *PIC* | 8/19/2016, 4:51 pm |
| Please welcome our new advertiser -- M&M Tools *LINK* *PIC* | 8/19/2016, 11:31 am |
| what's the deal with this? | 8/18/2016, 7:48 pm |
| Recommendation for the best 5/8" parobolic flute | 8/18/2016, 11:41 am |
| Gotta be careful what I wish for, *LINK* | 8/17/2016, 7:44 pm |
| Pepper mill boring | 8/17/2016, 5:39 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 8/17/2016, 12:43 pm |
| OT - do not buy this product *PIC* | 8/15/2016, 7:20 pm |
| IRS calls | 8/15/2016, 4:25 pm |
| Bill Rubenstein | 8/15/2016, 8:11 am |
| Swat | 8/14/2016, 7:21 pm |
| traditional vs irish grind *PIC* | 8/14/2016, 5:54 pm |
| PM 3520 electrical issue | 8/13/2016, 4:35 pm |
| Reviewing site | 8/12/2016, 6:46 pm |
| Have recently been trying some new...... *PIC* | 8/12/2016, 2:13 pm |
| OT - beware the Amazon Profit Monster | 8/11/2016, 4:00 pm |
| CA glue storage *PIC* | 8/11/2016, 3:32 pm |
| Turnings from class *PIC* | 8/11/2016, 9:15 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 8/10/2016, 3:08 pm |
| comfortable lathe height | 8/10/2016, 10:24 am |
| early morning turning | 8/10/2016, 8:20 am |
| Demonstrator question | 8/10/2016, 2:10 am |
| SCAM | 8/9/2016, 8:15 pm |
| Pen Turning Question | 8/8/2016, 5:49 pm |
| box videos | 8/8/2016, 9:39 am |
| Boxelder tinting question | 8/6/2016, 12:18 pm |
| The end of the Ash baseball bat? | 8/4/2016, 9:09 pm |
| Sphere - A yet untested method | 8/4/2016, 5:24 pm |
| Angle grinder mod. *NM* *LINK* | 8/4/2016, 2:04 pm |
| safety while turning | 8/4/2016, 8:58 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern | 8/3/2016, 6:56 pm |
| Comparison of Mounting Methods for Turning Slender *LINK* *PIC* | 8/3/2016, 3:31 pm |
| This is the second chunk of mystery wood..... *PIC* | 8/3/2016, 2:20 pm |
| Class last week *PIC* | 8/2/2016, 11:20 pm |
| Vincent Price - Woodturner(?) *LINK* | 8/2/2016, 4:23 pm |
| Nice threading jig. *NM* *LINK* | 7/31/2016, 8:42 pm |
| Thank You to Dennis in Southern Oregon *PIC* | 7/31/2016, 5:22 pm |
| captured ring tips | 7/31/2016, 12:59 pm |
| Turning question | 7/29/2016, 11:56 pm |
| Mango bow *PIC* | 7/29/2016, 4:20 pm |
| Found a good deal on powermatic lathe | 7/29/2016, 1:22 pm |
| Weekend Turning Project *PIC* | 7/27/2016, 11:30 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 7/27/2016, 3:24 pm |
| Oneway with a 5' extension | 7/26/2016, 4:47 pm |
| Oliver lathe *LINK* | 7/26/2016, 9:09 am |
| TOC Chicago | 7/25/2016, 5:26 pm |
| a little carving-very little turning *PIC* | 7/25/2016, 2:13 pm |
| new turnings *PIC* | 7/25/2016, 1:34 pm |
| My versions of articulated hollowing jig *LINK* *PIC* | 7/25/2016, 1:12 pm |
| Acrylic globe images *PIC* | 7/22/2016, 4:21 pm |
| Very Large Cherry burl | 7/22/2016, 11:06 am |
| inside out rings *PIC* | 7/22/2016, 9:39 am |
| You know you are over the hill when,,,,U- finish | 7/21/2016, 11:23 am |
| Chain Saws | 7/20/2016, 4:29 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 7/20/2016, 3:31 pm |
| Re: Vicmarc lathe for sale | 7/20/2016, 1:07 pm |
| Inverter parameters | 7/19/2016, 7:35 pm |
| The wrong way to use a drill [or lathe] | 7/19/2016, 4:32 pm |
| Nerver-racking, turning 3" acrylic globe | 7/17/2016, 8:32 pm |
| who makes the big demo tools? | 7/17/2016, 4:24 am |
| Off Topic for John Lucas and other string pluckers | 7/14/2016, 9:44 am |
| How do you know where a turner Lives? *PIC* | 7/13/2016, 10:16 pm |
| Demo in Elijay Ga | 7/13/2016, 8:46 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 7/13/2016, 4:43 pm |
| Price for a Stihl chainsaw | 7/13/2016, 12:37 pm |
| Straight razor as skew *LINK* | 7/13/2016, 11:33 am |
| Too funny | 7/13/2016, 7:45 am |
| Drying roughed bowls | 7/12/2016, 1:12 pm |
| Anchorseal 'classic' or '2' Which is better? | 7/11/2016, 10:41 pm |
| Allan Batty | 7/10/2016, 7:28 pm |
| Rethinking Woodturning Demonstrations | 7/8/2016, 3:13 pm |
| Bandsaw | 7/7/2016, 7:47 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 7/6/2016, 4:25 pm |
| CBN wheels with a radius | 7/5/2016, 7:30 pm |
| compound miter glue up jig *PIC* | 7/5/2016, 10:48 am |
| Steven Russell? | 7/5/2016, 9:53 am |
| Urns *PIC* | 7/4/2016, 3:31 pm |
| Inside-out Demo *PIC* | 7/4/2016, 11:38 am |
| OT-Really cool bass player *LINK* | 7/4/2016, 7:21 am |
| MacBeth color checker chart *LINK* | 7/3/2016, 2:11 pm |
| Been away for a while - still turning *PIC* | 7/3/2016, 10:10 am |
| Signing your work PICS *LINK* | 7/1/2016, 8:29 pm |
| More new things PICS | 7/1/2016, 6:43 pm |
| Paracord in woodturnings? PICS | 7/1/2016, 5:55 pm |
| New tops | 7/1/2016, 11:06 am |
| Gonna take a break | 6/30/2016, 11:08 am |
| Cup Centers for Sphere Turning *PIC* | 6/29/2016, 5:35 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 6/29/2016, 4:37 pm |
| PM90 to buy or not to buy | 6/29/2016, 9:17 am |
| Just got me some Mulberry | 6/28/2016, 12:51 pm |
| Stilll More on Simple Sphere Turning Aid | 6/26/2016, 3:38 pm |
| Craftsman lathe fans (if there are any) *NM* *LINK* | 6/26/2016, 8:10 am |
| Why display w axis vertical? | 6/25/2016, 10:33 pm |
| Let me tell you a little about Heartbreak, *LINK* | 6/24/2016, 9:12 pm |
| Lost Reliquary of Thoth, Hot melt and DNA *PIC* | 6/23/2016, 12:41 pm |
| Drill bits as beading tools -Woodcraft half off | 6/23/2016, 11:08 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 6/22/2016, 5:22 pm |
| Craigslist humor again, "Like New" *LINK* | 6/22/2016, 2:24 pm |
| Wow- and I mean Wow *NM* *LINK* | 6/22/2016, 8:46 am |
| Catching the catch video *LINK* | 6/22/2016, 8:40 am |
| demo ornament *PIC* | 6/21/2016, 5:21 pm |
| PepperMills *PIC* | 6/21/2016, 10:37 am |
| OT - Three Little Words .... *LINK* | 6/19/2016, 3:32 pm |
| I need a bigger lathe *LINK* | 6/19/2016, 9:26 am |
| OT, Father's Day Weekend/Windy City ride *PIC* | 6/18/2016, 11:54 pm |
| 3m airstream replacement battery | 6/17/2016, 7:27 pm |
| I enjoyed a Benoit Averly demo at the AAW..... *PIC* | 6/17/2016, 12:09 pm |
| Im getting too domesticated | 6/17/2016, 10:42 am |
| OK this is dooable-but *LINK* | 6/17/2016, 7:29 am |
| "What do you do with that" | 6/17/2016, 4:59 am |
| An Egg by the Numbers *PIC* | 6/15/2016, 6:57 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 6/15/2016, 6:24 pm |
| Spheroids using the Soren Berger Sphere Calipers *PIC* | 6/15/2016, 2:05 pm |
| Microwave drying | 6/14/2016, 10:11 pm |
| black walnut sapwood turning green | 6/14/2016, 3:24 pm |
| CBN wheels and Trend Lapping fluid | 6/14/2016, 12:58 pm |
| Great vendor volunteers at the AAW symposium | 6/14/2016, 9:54 am |
| Spheroids Anyone? Long *PIC* | 6/13/2016, 10:27 pm |
| Colored veneer *LINK* | 6/13/2016, 7:44 pm |
| Alumilite *LINK* | 6/13/2016, 7:41 pm |
| Reactive paint and patina *LINK* | 6/13/2016, 7:38 pm |
| Flutemaster threading jig *LINK* | 6/13/2016, 7:34 pm |
| I've made some Rube Goldberg looking devices, but *PIC* | 6/13/2016, 10:04 am |
| AAW Forum down | 6/13/2016, 5:54 am |
| Ruined MT *PIC* | 6/12/2016, 12:24 pm |
| (Message Deleted by Poster) | 6/11/2016, 11:46 pm |
| Flower mirror for my niece *PIC* | 6/11/2016, 4:06 pm |
| We're at the AAW symposiumy | 6/9/2016, 10:18 pm |
| OT, stray dogs with teeth *PIC* | 6/8/2016, 9:17 pm |
| Interstste parking lot | 6/8/2016, 12:32 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 6/8/2016, 7:13 am |
| in Memory of my Dad *PIC* | 6/7/2016, 6:32 am |
| 30 Spheres For 30 Years *PIC* | 6/6/2016, 5:46 pm |
| Please measure Powermatic headstock top.. | 6/5/2016, 5:31 pm |
| Finishing Colorply *PIC* | 6/4/2016, 10:39 pm |
| another book matched mirror *PIC* | 6/3/2016, 10:21 pm |
| OT, trapping raccoons *PIC* | 6/3/2016, 12:12 pm |
| AAW 2016 sessions for demonstrators and clubs | 6/3/2016, 11:19 am |
| the mirror that wasn't meant to be *PIC* | 6/3/2016, 9:35 am |
| Idea about coring equipment. Opinions? | 6/2/2016, 7:12 pm |
| Function follows form *PIC* | 6/1/2016, 10:11 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 6/1/2016, 2:47 pm |
| Book matched mirror *PIC* | 5/30/2016, 10:59 pm |
| Dad's urn *PIC* | 5/30/2016, 10:55 pm |
| InLace question | 5/29/2016, 4:43 pm |
| turning MDF | 5/29/2016, 4:13 pm |
| Is there a WC get-together planned for Atlanta? *NM* | 5/28/2016, 10:41 pm |
| goblet foot diameter? *PIC* | 5/28/2016, 3:36 am |
| I picked up an old Oliver Mach No 51-A | 5/27/2016, 11:20 pm |
| Anyone having issues with Windows 10+ Google Chrom | 5/26/2016, 9:28 pm |
| TBC for pens | 5/26/2016, 9:27 am |
| test | 5/26/2016, 8:50 am |
| Chat Room | 5/25/2016, 9:47 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 5/25/2016, 1:59 pm |
| Turners dance | 5/24/2016, 9:17 pm |
| OT First time 40 years, taking the summer off *PIC* | 5/24/2016, 12:53 pm |
| Vacuum Eccentric Sphere Chuck | 5/23/2016, 8:30 pm |
| using CA glue for a glossy finish | 5/22/2016, 8:49 am |
| latest mirrors *PIC* | 5/20/2016, 7:58 pm |
| Let's help John Lucas | 5/19/2016, 3:03 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 5/18/2016, 3:13 pm |
| Can I turn mesquite and leave the pith in. | 5/18/2016, 10:52 am |
| thought I would pass this on | 5/18/2016, 10:10 am |
| turning acrylic | 5/18/2016, 9:51 am |
| thin kerf | 5/18/2016, 9:44 am |
| Accurate drilling into odd shaped pieces | 5/17/2016, 5:23 pm |
| Richard Raffan Finish | 5/17/2016, 3:58 pm |
| Another stupid question. | 5/17/2016, 2:56 pm |
| Problem with Jet Mini Lathe | 5/17/2016, 12:54 pm |
| ***SURVEY #100 -- THE IDES OF MAY*** *LINK* | 5/17/2016, 10:24 am |
| You don't need a vacuum pump...... | 5/17/2016, 1:59 am |
| older craftsman 12" lathe ????? | 5/15/2016, 9:17 am |
| Forum response falling behind. | 5/14/2016, 10:33 pm |
| Another Sphere Jig Thread | 5/14/2016, 4:42 pm |
| removing ca stain with acetone? | 5/13/2016, 3:51 pm |
| delicate hollowing *PIC* | 5/12/2016, 9:57 am |
| clock group *PIC* | 5/12/2016, 8:29 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 5/11/2016, 4:13 pm |
| Draining compressor tank | 5/11/2016, 8:51 am |
| Strange tool | 5/10/2016, 5:00 pm |
| The Big Ugly Tool with Fred Uggla | 5/7/2016, 1:45 pm |
| Why do we call it turning | 5/7/2016, 7:20 am |
| Sparking 220v plug | 5/6/2016, 7:14 pm |
| Big Leaf Maple Burl | 5/5/2016, 9:47 pm |
| MidAtlantic Pen Gathering | 5/5/2016, 4:24 pm |
| DL40 lathe opinions | 5/5/2016, 9:24 am |
| Demo for Peachstate woodturners tonight | 5/5/2016, 7:42 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 5/4/2016, 4:26 pm |
| skew chisel issue | 5/4/2016, 12:21 pm |
| Neil Scobie is gone *NM* *LINK* | 5/4/2016, 9:46 am |
| Lucas beading tool in use *PIC* | 5/3/2016, 7:19 pm |
| Evolution of a series *PIC* | 5/2/2016, 3:58 pm |
| ***Peebles Tool Sale*** *LINK* | 5/2/2016, 11:50 am |
| Home made beading tool *PIC* | 5/1/2016, 7:32 pm |
| Turning Related *PIC* | 5/1/2016, 5:56 pm |
| Monster scraper set | 4/30/2016, 4:12 pm |
| Articulated hollowing tools | 4/29/2016, 5:37 pm |
| Still more on simple sphere turning aid *PIC* | 4/27/2016, 7:40 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 4/27/2016, 3:32 pm |
| Tic, tic, tic | 4/26/2016, 5:11 pm |
| Heat hardening Nicrhrome wire. | 4/26/2016, 3:08 pm |
| low forum activity | 4/26/2016, 7:45 am |
| Are we in Woodturnings "Golden Age?" | 4/25/2016, 3:57 pm |
| OT Dunning-Kruger effect *LINK* | 4/23/2016, 3:32 pm |
| Curious PM3520a behavior | 4/23/2016, 10:38 am |
| Basket Illusions | 4/22/2016, 7:50 am |
| problem with Wood River collet chucks | 4/21/2016, 7:04 pm |
| Chuck adaptors | 4/21/2016, 5:52 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 4/20/2016, 12:35 pm |
| More on Simple Sphere Turning Aid *PIC* | 4/19/2016, 3:51 pm |
| 2x2x36 cherry & hard maple turning squares | 4/18/2016, 6:18 pm |
| Remove hot glue with DNA! | 4/17/2016, 7:59 pm |
| The dark side is calling me | 4/17/2016, 6:45 pm |
| Finding utube videos | 4/17/2016, 10:05 am |
| OT Lithium ion batteries | 4/17/2016, 7:11 am |
| Thanks, Ellis! *PIC* | 4/16/2016, 11:11 pm |
| OT: Sort Of, YouTube | 4/15/2016, 1:51 pm |
| Yarn bowl question | 4/15/2016, 8:17 am |
| strange turning tools *PIC* | 4/13/2016, 9:58 pm |
| sphere play *PIC* | 4/13/2016, 9:05 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 4/13/2016, 4:13 pm |
| turning preference | 4/12/2016, 9:20 am |
| Simple aid for turning spheres without a jig *PIC* | 4/11/2016, 10:16 pm |
| very old clock *PIC* | 4/11/2016, 1:03 pm |
| Tormek wheel | 4/11/2016, 12:50 pm |
| Elevated Vessel *PIC* | 4/11/2016, 10:26 am |
| really big spindle. *LINK* | 4/10/2016, 3:40 pm |
| newbie at pen turning-- RANT | 4/10/2016, 3:37 pm |
| Designing Spindles | 4/9/2016, 2:37 pm |
| The future of woodturning *NM* *LINK* | 4/8/2016, 11:40 pm |
| Anyone ever see Colin Schleeh in his shop? *LINK* | 4/8/2016, 5:35 pm |
| Unusual turning request: tire thumpers *PIC* | 4/8/2016, 4:45 pm |
| Totally Turning /Showcase 2016 *PIC* | 4/8/2016, 9:26 am |
| Some Tuirning-Some Not *PIC* | 4/6/2016, 8:54 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern | 4/6/2016, 4:57 pm |
| OneWay Chuck Spur drive maintenance *PIC* | 4/6/2016, 3:09 pm |
| Sphere vessel with spackling paste filler *PIC* | 4/6/2016, 1:44 pm |
| As Forrest Gump Would Say..... *PIC* | 4/5/2016, 2:12 pm |
| Back up | 4/5/2016, 11:53 am |
| Jacobs ladder | 4/4/2016, 9:58 pm |
| Shawo wooden bowl | 4/4/2016, 9:07 pm |
| Delta 46-460 speed control | 4/4/2016, 8:45 pm |
| Need to contact the legendary Robbo Hippy | 4/4/2016, 11:38 am |
| Great to see everyone in Saratoga | 4/4/2016, 10:27 am |
| ACC workshops *LINK* | 4/2/2016, 4:23 pm |
| Bob Ross woodturning *NM* *LINK* | 4/2/2016, 3:58 pm |
| Yet another new tool you gotta have *NM* | 4/2/2016, 2:12 am |
| first impressions with the Vermec sphere jig | 4/1/2016, 4:13 pm |
| Had to get some gifts made *PIC* | 4/1/2016, 11:52 am |
| Lee Valley's "new" tool *LINK* | 4/1/2016, 11:48 am |
| Here you go Alan- right up your alley  *NM* *LINK* | 4/1/2016, 7:57 am |
| Yet another couple of spheres | 3/31/2016, 8:41 pm |
| Remote demonstration POC - Video *LINK* | 3/31/2016, 12:22 pm |
| OT - young guitarist | 3/31/2016, 10:45 am |
| Monster Lathe Tools | 3/30/2016, 11:11 pm |
| 1000 grit CBN wheel | 3/30/2016, 6:23 pm |
| SAIT Sandpaper | 3/30/2016, 5:53 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 3/30/2016, 12:28 pm |
| "Potentially" dangerous question | 3/30/2016, 10:16 am |
| green wood bowl dilema | 3/29/2016, 9:53 am |
| The worst grind I've ever seen. *PIC* | 3/29/2016, 8:13 am |
| Looking for long drill bit source | 3/28/2016, 4:36 pm |
| Tailstock sliding, engineering design ? | 3/28/2016, 11:47 am |
| How long should your tool handle be? *LINK* | 3/27/2016, 5:27 pm |
| Turning Teak | 3/27/2016, 11:34 am |
| Small Clamp Deal | 3/26/2016, 10:59 pm |
| Life expectancy | 3/26/2016, 10:24 am |
| Very old piece *PIC* | 3/25/2016, 9:45 am |
| tired of spheres yet? *PIC* | 3/24/2016, 11:28 pm |
| Tribute to Wally *PIC* | 3/24/2016, 10:34 pm |
| Totally Turning Saturday Dinner -- Last Call | 3/24/2016, 7:12 pm |
| Carved, Turned lidded hollow form, Chrysalis *LINK* | 3/24/2016, 5:33 pm |
| Easy Chuck production issues | 3/24/2016, 5:15 pm |
| Steel City bench grinder first impressions *PIC* | 3/24/2016, 4:26 pm |
| I'lll be turning in my grave t shirt source | 3/24/2016, 3:46 pm |
| Hartville Tool deal *PIC* | 3/24/2016, 2:51 pm |
| Berger Sphere Caliper? | 3/24/2016, 2:22 pm |
| Wally Dickerman Passing | 3/24/2016, 9:34 am |
| scrapers *LINK* | 3/23/2016, 7:41 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern | 3/23/2016, 4:06 pm |
| Resin? | 3/22/2016, 6:56 pm |
| OT: Block Plane Question for Flat Woodworkers | 3/22/2016, 11:56 am |
| Beal Woodturning Scraper Set | 3/22/2016, 11:29 am |
| Sphere Jig Accessory Question | 3/22/2016, 7:57 am |
| OT vintage family picture story | 3/22/2016, 12:22 am |
| turning a sphere by hand *PIC* | 3/21/2016, 10:29 pm |
| Dust Collectors Again | 3/21/2016, 6:38 pm |
| My weekend *PIC* | 3/21/2016, 2:04 pm |
| Turning Meeting CNC *LINK* | 3/21/2016, 1:07 pm |
| OT for John Lucas - *LINK* | 3/21/2016, 10:57 am |
| lathe speeds for each tool | 3/21/2016, 12:02 am |
| Alisam index pin revisit | 3/20/2016, 5:12 pm |
| Finish for Lazy Susans | 3/20/2016, 3:08 pm |
| Lauren turning spheres | 3/19/2016, 10:34 pm |
| Big Island Woodturner's Turnin show in Hilo Hi | 3/19/2016, 1:37 pm |
| Ot.dads progress | 3/19/2016, 10:39 am |
| Nova 2024 Tool Slide | 3/19/2016, 9:42 am |
| Mirror *PIC* | 3/19/2016, 2:53 am |
| Powermatic on/off switch | 3/18/2016, 1:21 pm |
| GAW meeting | 3/17/2016, 4:00 pm |
| OT: ffffffffffffffffffffffffffffffffffff | 3/17/2016, 12:11 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 3/16/2016, 4:27 pm |
| Dust Collection Comparisions | 3/15/2016, 11:54 pm |
| Spring time in Peoria *PIC* | 3/15/2016, 9:48 pm |
| Hand Tool Chat, Every Tuesday Evening | 3/15/2016, 6:45 pm |
| tool rest question | 3/15/2016, 1:31 am |
| Alisam spring loaded index pin. *PIC* | 3/14/2016, 8:58 pm |
| Book matched mirrors *PIC* | 3/14/2016, 8:53 pm |
| Using the Big Ugly | 3/14/2016, 6:07 pm |
| my Thompson gouge is getting too short *PIC* | 3/13/2016, 1:03 pm |
| Grinder Light | 3/12/2016, 5:22 pm |
| should have waited to start back turning | 3/11/2016, 2:00 pm |
| Coring Device | 3/11/2016, 9:40 am |
| Powermatic lathe | 3/11/2016, 9:14 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern | 3/9/2016, 2:05 pm |
| Which Osprey? | 3/9/2016, 1:53 pm |
| Powermatic won't start question | 3/8/2016, 12:47 pm |
| Lathe Problem | 3/7/2016, 6:58 pm |
| Dust Collection Advice Needed | 3/6/2016, 6:50 pm |
| OT, Music: | 3/6/2016, 2:16 pm |
| Help with 3520B | 3/5/2016, 10:17 pm |
| Practicing while you turn | 3/5/2016, 6:46 pm |
| Jet/PM Lathe sale | 3/4/2016, 2:33 pm |
| Big job finished *PIC* | 3/4/2016, 12:55 pm |
| Maple Burl | 3/4/2016, 11:33 am |
| Curious what has happened to Matthew Hill | 3/4/2016, 12:32 am |
| Remote demonstration POC | 3/3/2016, 6:26 pm |
| Latest turning - segmented container *PIC* | 3/3/2016, 1:14 pm |
| indexing problem | 3/3/2016, 11:13 am |
| Next time you go through bottom of bowl *LINK* *PIC* | 3/2/2016, 10:03 pm |
| PM 3520 Local Listing | 3/2/2016, 6:17 pm |
| Experimented on a BOC container by ....... | 3/2/2016, 4:20 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 3/2/2016, 3:10 pm |
| Vacuum Setup | 3/2/2016, 1:25 pm |
| AAW dvd's | 3/2/2016, 8:47 am |
| I always thought lathes should be named by price | 3/2/2016, 8:27 am |
| PM 3520b dimension | 3/1/2016, 8:40 pm |
| “Yes, but it will be beautiful!” *LINK* | 3/1/2016, 5:41 pm |
| New Event Posted in "EVENTS" | 3/1/2016, 3:20 pm |
| THANK YOU!! / LATHE CHUCK ? *NM* | 3/1/2016, 9:25 am |
| lathe chuck ? | 3/1/2016, 12:53 am |
| Mushroom article in More Woodturning magazine *LINK* *PIC* | 2/29/2016, 6:59 pm |
| Harp designs candlesticks *LINK* | 2/28/2016, 7:37 pm |
| tree trunk removal | 2/28/2016, 12:39 pm |
| wheels on lathe ? | 2/28/2016, 12:20 am |
| Residue from Tape | 2/27/2016, 7:53 pm |
| Return from hawaii *PIC* | 2/26/2016, 6:14 pm |
| CBN wheels questions | 2/26/2016, 10:26 am |
| Second Beads of Courage box *PIC* | 2/25/2016, 6:26 pm |
| The Big Ugly Tool | 2/25/2016, 1:51 pm |
| Wet tools | 2/24/2016, 4:54 pm |
| Local want ads very original spelling *NM* *LINK* | 2/24/2016, 4:20 pm |
| Nichrome wire - woodburning | 2/24/2016, 3:49 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 2/24/2016, 11:37 am |
| Carbide tipped bandsaw blade | 2/24/2016, 10:59 am |
| Bandsaw Dust Ports Do Not Suck | 2/22/2016, 4:55 pm |
| New Posting in Events! | 2/22/2016, 9:32 am |
| [AD] Win a set of turning tools! | 2/21/2016, 1:48 pm |
| Something new for me *PIC* | 2/21/2016, 10:49 am |
| Big Thank You to John Lucas & John k Jordan *NM* | 2/20/2016, 6:49 pm |
| Mini mirror *PIC* | 2/20/2016, 11:02 am |
| turning with your eyes | 2/20/2016, 6:13 am |
| Question for john Lucas | 2/20/2016, 12:33 am |
| OT Boys in Beards *PIC* | 2/18/2016, 8:13 pm |
| practice ornament *PIC* | 2/17/2016, 9:53 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 2/17/2016, 2:39 pm |
| John Lucas Router Demo *LINK* | 2/17/2016, 1:19 pm |
| Green AO-Gold bar- Red Rouge stropping | 2/17/2016, 9:29 am |
| John Lucas | 2/16/2016, 9:29 pm |
| Glaser scraper for sale on Classifieds bd. *NM* | 2/15/2016, 10:00 pm |
| more hand mirrors *PIC* | 2/15/2016, 8:05 pm |
| Spalted spots | 2/15/2016, 11:46 am |
| Vicmar chucks | 2/15/2016, 11:04 am |
| Vicmar chucks | 2/15/2016, 10:49 am |
| My first "Beads of Courage" box *PIC* | 2/14/2016, 8:55 pm |
| sharpening sharper than ever | 2/14/2016, 4:35 pm |
| Beading Tool | 2/13/2016, 1:01 pm |
| Used machinery market | 2/13/2016, 10:23 am |
| Jet Mini Lathe Motor | 2/12/2016, 2:57 pm |
| 20" disk sander | 2/12/2016, 1:46 pm |
| for you segmented turners *LINK* | 2/11/2016, 7:36 pm |
| more info on GRiz and chucks plus chucks. | 2/11/2016, 7:15 pm |
| Wally Dickerman | 2/11/2016, 11:51 am |
| Dinner Reservations for Saratoga Saturday, 4-2-16 | 2/10/2016, 9:22 pm |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 2/10/2016, 4:32 pm |
| Center point when using a faceplate *PIC* | 2/10/2016, 1:07 pm |
| MDF chuck jaws *PIC* | 2/10/2016, 1:02 pm |
| Mirror handle problems and solutions *PIC* | 2/10/2016, 1:00 pm |
| Reed Gray has another good video | 2/10/2016, 9:32 am |
| Totally Turning -- Saratoga, NY -- April 2-3 *LINK* | 2/9/2016, 2:53 pm |
| sharpening a detail chisel *PIC* | 2/9/2016, 12:18 pm |
| Wally Dickerman | 2/9/2016, 4:06 am |
| Bean's Cafe Empty Bowl Project *LINK* *PIC* | 2/8/2016, 11:01 pm |
| Woodturning ad in super bowl *LINK* | 2/8/2016, 7:01 pm |
| OT Baking *LINK* | 2/8/2016, 3:38 pm |
| John Lucas on you-tube | 2/7/2016, 4:07 pm |
| New Turnings For the Past 3 days *PIC* | 2/6/2016, 9:57 pm |
| new mirrors *PIC* | 2/6/2016, 7:53 pm |
| Big Leaf maple Burl | 2/6/2016, 5:25 pm |
| Multi Axis? Facetnating! *PIC* | 2/5/2016, 6:03 pm |
| Beads in the morning-just a teaser *PIC* | 2/5/2016, 8:57 am |
| urns for ashes | 2/4/2016, 7:22 pm |
| ash log *PIC* | 2/4/2016, 11:22 am |
| OT a little wake up *LINK* | 2/4/2016, 10:20 am |
| Don't Forget Turning Chat Tonight 9:30 Eastern *NM* | 2/3/2016, 3:10 pm |
| Segmented Sanding Sled *PIC* | 2/2/2016, 10:40 pm |
| John K Jordan and I went to the TAW symposium | 2/1/2016, 7:48 pm |
| Re-sawing segmented rings. | 2/1/2016, 11:17 am |
| segmented pieces | 2/1/2016, 10:35 am |
| Scraper handles: | 1/30/2016, 5:09 pm |
| Add Drawbar to #2MT Chuck? | 1/30/2016, 3:49 pm |
| Screw chuck | 1/30/2016, 1:04 pm |
| 10" PSA Sanding Discs Help! | 1/30/2016, 9:10 am |
| Met our Grandson today *PIC* | 1/29/2016, 10:23 pm |
| New Spheres-*PICS* *PIC* | 1/27/2016, 11:17 am |
| is anybody turning | 1/16/2016, 8:42 am |
| Seam ripper o-ring dry-out | 8/7/2015, 10:50 am |
