1 2 3 4

Turning Archive

Topic
Turning Chat Tonight, Wednesday ~9:30 p.m. EDT10/26/2016, 12:31 pm
Number 110/25/2016, 12:34 pm
Hand Tool Chat This Evening, Tuesday 9:30 p.m. EDT *NM*10/25/2016, 10:52 am
General Woodworking Chat Tonight, 9:30 p.m. E.D.T. *NM*10/24/2016, 12:56 pm
Cleaning Chucks10/24/2016, 9:54 am
square routed ornament. *PIC*10/23/2016, 7:56 pm
Tailstock question10/23/2016, 7:23 pm
So what have you been doing?10/23/2016, 4:15 pm
Magnolia Wood10/20/2016, 8:50 pm
Tree crotches for turning10/20/2016, 1:40 pm
Ways to stop green blanks from growing mold???10/19/2016, 11:38 pm
spider *PIC*10/19/2016, 8:18 pm
square ornaments *PIC*10/19/2016, 8:17 pm
6 sided screw lid box *PIC*10/19/2016, 8:15 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*10/19/2016, 3:14 pm
New spin-tops10/19/2016, 12:26 am
We turners don't even know what sharp is *NM* *LINK*10/18/2016, 9:51 pm
demo and Hands On in Traverse City, MI *PIC*10/18/2016, 9:14 pm
3 hour class10/18/2016, 2:58 pm
Idea for next year, maybe AAW competition or WC?10/18/2016, 12:22 pm
Hand Tool Chat This Evening, Tuesday 9:30 p.m. EDT *NM*10/18/2016, 12:11 pm
1st two bowls off my lathe *PIC*10/17/2016, 9:56 pm
Why does buffinv hurt my bsck10/16/2016, 12:22 pm
"stop woodturning; just plane"10/15/2016, 11:58 am
Wood Tool Parts10/15/2016, 11:42 am
Building club library10/12/2016, 7:56 pm
A question for those who buy burls????10/12/2016, 5:23 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*10/12/2016, 4:30 pm
Teaching Turning and the use of chucks10/12/2016, 4:12 pm
Hand Tool Chat This Evening, Tuesday 9:30 p.m. EDT10/11/2016, 2:13 pm
projects for my classes at the Craft Center *PIC*10/10/2016, 6:56 pm
Interesting video on using the skew *LINK*10/10/2016, 5:24 am
Apple Wood turns into Pine Wood10/9/2016, 12:55 pm
McNaughton Tool Post10/8/2016, 2:44 pm
Airshield pro10/8/2016, 10:29 am
segmented ornaments *PIC*10/7/2016, 7:35 pm
Laser Guide for Lathe10/7/2016, 2:24 pm
Right angle drill *LINK*10/7/2016, 11:01 am
PM 3520B: replaced inverter, still not working10/6/2016, 8:59 pm
Dremel repair *PIC*10/6/2016, 1:52 pm
Extraordinary figure in hollow trees?10/6/2016, 10:37 am
Very unusual Red Maple Tree *PIC*10/6/2016, 1:33 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*10/5/2016, 3:42 pm
Electric Motor vs. Magnetic Tool Tray10/5/2016, 1:14 pm
large carving *PIC*10/4/2016, 6:57 pm
Jet 1236 Lathe won't stay running10/3/2016, 8:12 pm
Mahoney Walnut Oil10/3/2016, 12:20 pm
Some new ideas *PIC*10/1/2016, 1:38 pm
need vacuum pump advise10/1/2016, 6:35 am
Tomorrow is the last chance to renew 9/29/2016, 1:38 pm
3520b storage cabinet?9/29/2016, 11:33 am
Very fun- using odd cutting tools *LINK*9/29/2016, 8:45 am
Jamie- who needs a Porche *NM* *LINK*9/29/2016, 6:42 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*9/28/2016, 4:42 pm
OT:Minwax Wood Finish9/28/2016, 11:35 am
aiming the bevel *LINK*9/27/2016, 10:25 am
Hand Tool Chat This Evening 9:30 p.m. EDT *NM*9/27/2016, 6:39 am
Enhanced staining color9/26/2016, 8:52 pm
Beads of Courage Bowls9/26/2016, 5:48 am
Hugh McKay Hollower Tool9/25/2016, 5:23 pm
Spheres and cup centers - Pen turning related9/25/2016, 1:05 pm
An Easier Celtic Knot *LINK*9/23/2016, 2:16 pm
13ft chainsaw!! cutting old salvaged redwood9/23/2016, 12:23 pm
Anyone going to the first mid-Atlantic symposium?9/22/2016, 7:30 pm
3520b lathe is home9/20/2016, 9:51 pm
Hand Tool Chat, Tonight, Tuesday, 9:30 EDT *NM*9/20/2016, 6:21 pm
Hawaii Wood Show9/20/2016, 8:58 am
OT: serious slight of hand *LINK*9/19/2016, 10:10 pm
Taper Shank drill bits *PIC*9/19/2016, 4:28 pm
bought a 3520b9/18/2016, 11:20 pm
Turning Mirrors with John Lucas *PIC*9/18/2016, 8:15 pm
Wood Score *PIC*9/18/2016, 8:06 pm
OT Rough week for reality TV guys9/18/2016, 12:51 am
New bar a chain to deal with large maple *PIC*9/16/2016, 11:41 pm
Sanding Pen Tubes9/16/2016, 5:20 pm
Piercing tools9/12/2016, 9:43 pm
One day classes- what to teach9/12/2016, 6:28 pm
Bigger Basket Illusion *PIC*9/12/2016, 6:02 pm
Chainsaw envy!9/12/2016, 4:47 pm
Walnut Shelf9/12/2016, 3:33 pm
Nova Lathe 3000 Upgrade9/12/2016, 10:38 am
Natural edge box with the bark as lid9/11/2016, 9:30 pm
Don't Come Closer with that Chain Saw! *PIC*9/10/2016, 6:10 pm
radio noise9/9/2016, 11:33 am
mounting a piece on a base9/8/2016, 1:14 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*9/7/2016, 1:35 pm
AAW Forum Hacked?9/7/2016, 1:29 pm
Carnauba wax9/6/2016, 11:35 pm
Inside out Mirror *PIC*9/6/2016, 6:31 pm
Speaking of spheres... *LINK*9/6/2016, 4:24 pm
3520B Banjo9/5/2016, 8:33 pm
My favorite cherry tree *LINK* *PIC*9/4/2016, 4:37 pm
need sandpaper storage unit *PIC*9/3/2016, 2:00 pm
Basket Illusion Revisited. *PIC*9/3/2016, 12:33 pm
Ni-chrom wire9/2/2016, 4:19 pm
off center turning *LINK*9/2/2016, 3:59 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*8/31/2016, 2:53 pm
Finally doing something besides bicycle riding *PIC*8/31/2016, 1:46 pm
August turnings *PIC*8/31/2016, 12:43 pm
Dog bowl vs good bowl *PIC*8/31/2016, 8:46 am
New Ornament - Inspired by John Lucas *PIC*8/30/2016, 5:50 pm
Eureka8/30/2016, 5:43 pm
Why is it8/30/2016, 4:28 pm
Hand Tool Chat Tonight8/30/2016, 2:06 pm
At your own risk...an idea for surface treatment *LINK*8/30/2016, 1:00 pm
Went to SWAT8/30/2016, 12:47 am
Crazy project *PIC*8/29/2016, 10:16 pm
Great publicity for our club8/28/2016, 2:57 pm
I've been busy lately *PIC*8/26/2016, 8:08 am
looking at a new lathe8/25/2016, 5:20 pm
A voice from the past8/25/2016, 2:41 pm
if you're at swat...8/25/2016, 1:39 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*8/24/2016, 1:20 pm
David Marks Turning Large Vessel *LINK*8/22/2016, 9:42 pm
Screw choice for END-GRAIN Bradford Pear?8/20/2016, 7:59 pm
OT for you archers *LINK*8/20/2016, 7:51 pm
Turning colored acrylic *PIC*8/20/2016, 3:55 pm
Carving with just a little turning *PIC*8/19/2016, 4:51 pm
Please welcome our new advertiser -- M&M Tools *LINK* *PIC*8/19/2016, 11:31 am
what's the deal with this?8/18/2016, 7:48 pm
Recommendation for the best 5/8" parobolic flute 8/18/2016, 11:41 am
Gotta be careful what I wish for, *LINK*8/17/2016, 7:44 pm
Pepper mill boring8/17/2016, 5:39 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*8/17/2016, 12:43 pm
OT - do not buy this product *PIC*8/15/2016, 7:20 pm
IRS calls8/15/2016, 4:25 pm
Bill Rubenstein8/15/2016, 8:11 am
Swat8/14/2016, 7:21 pm
traditional vs irish grind *PIC*8/14/2016, 5:54 pm
PM 3520 electrical issue8/13/2016, 4:35 pm
Reviewing site8/12/2016, 6:46 pm
Have recently been trying some new...... *PIC*8/12/2016, 2:13 pm
OT - beware the Amazon Profit Monster8/11/2016, 4:00 pm
CA glue storage *PIC*8/11/2016, 3:32 pm
Turnings from class *PIC*8/11/2016, 9:15 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*8/10/2016, 3:08 pm
comfortable lathe height8/10/2016, 10:24 am
early morning turning8/10/2016, 8:20 am
Demonstrator question8/10/2016, 2:10 am
SCAM8/9/2016, 8:15 pm
Pen Turning Question8/8/2016, 5:49 pm
box videos8/8/2016, 9:39 am
Boxelder tinting question8/6/2016, 12:18 pm
The end of the Ash baseball bat?8/4/2016, 9:09 pm
Sphere - A yet untested method8/4/2016, 5:24 pm
Angle grinder mod. *NM* *LINK*8/4/2016, 2:04 pm
safety while turning8/4/2016, 8:58 am
Don't Forget Turning Chat Tonight 9:30 Eastern8/3/2016, 6:56 pm
Comparison of Mounting Methods for Turning Slender *LINK* *PIC*8/3/2016, 3:31 pm
This is the second chunk of mystery wood..... *PIC*8/3/2016, 2:20 pm
Class last week *PIC*8/2/2016, 11:20 pm
Vincent Price - Woodturner(?) *LINK*8/2/2016, 4:23 pm
Nice threading jig. *NM* *LINK*7/31/2016, 8:42 pm
Thank You to Dennis in Southern Oregon *PIC*7/31/2016, 5:22 pm
captured ring tips7/31/2016, 12:59 pm
Turning question7/29/2016, 11:56 pm
Mango bow *PIC*7/29/2016, 4:20 pm
Found a good deal on powermatic lathe7/29/2016, 1:22 pm
Weekend Turning Project *PIC*7/27/2016, 11:30 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*7/27/2016, 3:24 pm
Oneway with a 5' extension7/26/2016, 4:47 pm
Oliver lathe *LINK*7/26/2016, 9:09 am
TOC Chicago7/25/2016, 5:26 pm
a little carving-very little turning *PIC*7/25/2016, 2:13 pm
new turnings *PIC*7/25/2016, 1:34 pm
My versions of articulated hollowing jig *LINK* *PIC*7/25/2016, 1:12 pm
Acrylic globe images *PIC*7/22/2016, 4:21 pm
Very Large Cherry burl7/22/2016, 11:06 am
inside out rings *PIC*7/22/2016, 9:39 am
You know you are over the hill when,,,,U- finish7/21/2016, 11:23 am
Chain Saws7/20/2016, 4:29 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*7/20/2016, 3:31 pm
Re: Vicmarc lathe for sale7/20/2016, 1:07 pm
Inverter parameters7/19/2016, 7:35 pm
The wrong way to use a drill [or lathe]7/19/2016, 4:32 pm
Nerver-racking, turning 3" acrylic globe7/17/2016, 8:32 pm
who makes the big demo tools?7/17/2016, 4:24 am
Off Topic for John Lucas and other string pluckers7/14/2016, 9:44 am
How do you know where a turner Lives? *PIC*7/13/2016, 10:16 pm
Demo in Elijay Ga7/13/2016, 8:46 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*7/13/2016, 4:43 pm
Price for a Stihl chainsaw7/13/2016, 12:37 pm
Straight razor as skew *LINK*7/13/2016, 11:33 am
Too funny7/13/2016, 7:45 am
Drying roughed bowls7/12/2016, 1:12 pm
Anchorseal 'classic' or '2' Which is better?7/11/2016, 10:41 pm
Allan Batty7/10/2016, 7:28 pm
Rethinking Woodturning Demonstrations7/8/2016, 3:13 pm
Bandsaw7/7/2016, 7:47 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*7/6/2016, 4:25 pm
CBN wheels with a radius7/5/2016, 7:30 pm
compound miter glue up jig *PIC*7/5/2016, 10:48 am
Steven Russell?7/5/2016, 9:53 am
Urns *PIC*7/4/2016, 3:31 pm
Inside-out Demo *PIC*7/4/2016, 11:38 am
OT-Really cool bass player *LINK*7/4/2016, 7:21 am
MacBeth color checker chart *LINK*7/3/2016, 2:11 pm
Been away for a while - still turning *PIC*7/3/2016, 10:10 am
Signing your work PICS *LINK*7/1/2016, 8:29 pm
More new things PICS7/1/2016, 6:43 pm
Paracord in woodturnings? PICS7/1/2016, 5:55 pm
New tops7/1/2016, 11:06 am
Gonna take a break6/30/2016, 11:08 am
Cup Centers for Sphere Turning *PIC*6/29/2016, 5:35 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*6/29/2016, 4:37 pm
PM90 to buy or not to buy6/29/2016, 9:17 am
Just got me some Mulberry6/28/2016, 12:51 pm
Stilll More on Simple Sphere Turning Aid6/26/2016, 3:38 pm
Craftsman lathe fans (if there are any) *NM* *LINK*6/26/2016, 8:10 am
Why display w axis vertical?6/25/2016, 10:33 pm
Let me tell you a little about Heartbreak, *LINK*6/24/2016, 9:12 pm
Lost Reliquary of Thoth, Hot melt and DNA *PIC*6/23/2016, 12:41 pm
Drill bits as beading tools -Woodcraft half off6/23/2016, 11:08 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*6/22/2016, 5:22 pm
Craigslist humor again, "Like New" *LINK*6/22/2016, 2:24 pm
Wow- and I mean Wow *NM* *LINK*6/22/2016, 8:46 am
Catching the catch video *LINK*6/22/2016, 8:40 am
demo ornament *PIC*6/21/2016, 5:21 pm
PepperMills *PIC*6/21/2016, 10:37 am
OT - Three Little Words .... *LINK*6/19/2016, 3:32 pm
I need a bigger lathe *LINK*6/19/2016, 9:26 am
OT, Father's Day Weekend/Windy City ride *PIC*6/18/2016, 11:54 pm
3m airstream replacement battery6/17/2016, 7:27 pm
I enjoyed a Benoit Averly demo at the AAW..... *PIC*6/17/2016, 12:09 pm
Im getting too domesticated6/17/2016, 10:42 am
OK this is dooable-but *LINK*6/17/2016, 7:29 am
"What do you do with that"6/17/2016, 4:59 am
An Egg by the Numbers *PIC*6/15/2016, 6:57 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*6/15/2016, 6:24 pm
Spheroids using the Soren Berger Sphere Calipers *PIC*6/15/2016, 2:05 pm
Microwave drying6/14/2016, 10:11 pm
black walnut sapwood turning green6/14/2016, 3:24 pm
CBN wheels and Trend Lapping fluid6/14/2016, 12:58 pm
Great vendor volunteers at the AAW symposium6/14/2016, 9:54 am
Spheroids Anyone? Long *PIC*6/13/2016, 10:27 pm
Colored veneer *LINK*6/13/2016, 7:44 pm
Alumilite *LINK*6/13/2016, 7:41 pm
Reactive paint and patina *LINK*6/13/2016, 7:38 pm
Flutemaster threading jig *LINK*6/13/2016, 7:34 pm
I've made some Rube Goldberg looking devices, but *PIC*6/13/2016, 10:04 am
AAW Forum down6/13/2016, 5:54 am
Ruined MT *PIC*6/12/2016, 12:24 pm
(Message Deleted by Poster)6/11/2016, 11:46 pm
Flower mirror for my niece *PIC*6/11/2016, 4:06 pm
We're at the AAW symposiumy6/9/2016, 10:18 pm
OT, stray dogs with teeth *PIC*6/8/2016, 9:17 pm
Interstste parking lot6/8/2016, 12:32 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*6/8/2016, 7:13 am
in Memory of my Dad *PIC*6/7/2016, 6:32 am
30 Spheres For 30 Years *PIC*6/6/2016, 5:46 pm
Please measure Powermatic headstock top..6/5/2016, 5:31 pm
Finishing Colorply *PIC*6/4/2016, 10:39 pm
another book matched mirror *PIC*6/3/2016, 10:21 pm
OT, trapping raccoons *PIC*6/3/2016, 12:12 pm
AAW 2016 sessions for demonstrators and clubs6/3/2016, 11:19 am
the mirror that wasn't meant to be *PIC*6/3/2016, 9:35 am
Idea about coring equipment. Opinions?6/2/2016, 7:12 pm
Function follows form *PIC*6/1/2016, 10:11 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*6/1/2016, 2:47 pm
Book matched mirror *PIC*5/30/2016, 10:59 pm
Dad's urn *PIC*5/30/2016, 10:55 pm
InLace question5/29/2016, 4:43 pm
turning MDF5/29/2016, 4:13 pm
Is there a WC get-together planned for Atlanta? *NM*5/28/2016, 10:41 pm
goblet foot diameter? *PIC*5/28/2016, 3:36 am
I picked up an old Oliver Mach No 51-A5/27/2016, 11:20 pm
Anyone having issues with Windows 10+ Google Chrom5/26/2016, 9:28 pm
TBC for pens5/26/2016, 9:27 am
test5/26/2016, 8:50 am
Chat Room5/25/2016, 9:47 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*5/25/2016, 1:59 pm
Turners dance5/24/2016, 9:17 pm
OT First time 40 years, taking the summer off *PIC*5/24/2016, 12:53 pm
Vacuum Eccentric Sphere Chuck5/23/2016, 8:30 pm
using CA glue for a glossy finish5/22/2016, 8:49 am
latest mirrors *PIC*5/20/2016, 7:58 pm
Let's help John Lucas5/19/2016, 3:03 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*5/18/2016, 3:13 pm
Can I turn mesquite and leave the pith in.5/18/2016, 10:52 am
thought I would pass this on5/18/2016, 10:10 am
turning acrylic5/18/2016, 9:51 am
thin kerf5/18/2016, 9:44 am
Accurate drilling into odd shaped pieces5/17/2016, 5:23 pm
Richard Raffan Finish5/17/2016, 3:58 pm
Another stupid question.5/17/2016, 2:56 pm
Problem with Jet Mini Lathe5/17/2016, 12:54 pm
***SURVEY #100 -- THE IDES OF MAY*** *LINK*5/17/2016, 10:24 am
You don't need a vacuum pump......5/17/2016, 1:59 am
older craftsman 12" lathe ?????5/15/2016, 9:17 am
Forum response falling behind.5/14/2016, 10:33 pm
Another Sphere Jig Thread5/14/2016, 4:42 pm
removing ca stain with acetone?5/13/2016, 3:51 pm
delicate hollowing *PIC*5/12/2016, 9:57 am
clock group *PIC*5/12/2016, 8:29 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*5/11/2016, 4:13 pm
Draining compressor tank5/11/2016, 8:51 am
Strange tool5/10/2016, 5:00 pm
The Big Ugly Tool with Fred Uggla5/7/2016, 1:45 pm
Why do we call it turning5/7/2016, 7:20 am
Sparking 220v plug5/6/2016, 7:14 pm
Big Leaf Maple Burl5/5/2016, 9:47 pm
MidAtlantic Pen Gathering5/5/2016, 4:24 pm
DL40 lathe opinions5/5/2016, 9:24 am
Demo for Peachstate woodturners tonight5/5/2016, 7:42 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*5/4/2016, 4:26 pm
skew chisel issue5/4/2016, 12:21 pm
Neil Scobie is gone *NM* *LINK*5/4/2016, 9:46 am
Lucas beading tool in use *PIC*5/3/2016, 7:19 pm
Evolution of a series *PIC*5/2/2016, 3:58 pm
***Peebles Tool Sale*** *LINK*5/2/2016, 11:50 am
Home made beading tool *PIC*5/1/2016, 7:32 pm
Turning Related *PIC*5/1/2016, 5:56 pm
Monster scraper set4/30/2016, 4:12 pm
Articulated hollowing tools4/29/2016, 5:37 pm
Still more on simple sphere turning aid *PIC*4/27/2016, 7:40 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*4/27/2016, 3:32 pm
Tic, tic, tic4/26/2016, 5:11 pm
Heat hardening Nicrhrome wire.4/26/2016, 3:08 pm
low forum activity4/26/2016, 7:45 am
Are we in Woodturnings "Golden Age?"4/25/2016, 3:57 pm
OT Dunning-Kruger effect *LINK*4/23/2016, 3:32 pm
Curious PM3520a behavior4/23/2016, 10:38 am
Basket Illusions4/22/2016, 7:50 am
problem with Wood River collet chucks4/21/2016, 7:04 pm
Chuck adaptors4/21/2016, 5:52 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*4/20/2016, 12:35 pm
More on Simple Sphere Turning Aid *PIC*4/19/2016, 3:51 pm
2x2x36 cherry & hard maple turning squares4/18/2016, 6:18 pm
Remove hot glue with DNA!4/17/2016, 7:59 pm
The dark side is calling me4/17/2016, 6:45 pm
Finding utube videos4/17/2016, 10:05 am
OT Lithium ion batteries4/17/2016, 7:11 am
Thanks, Ellis! *PIC*4/16/2016, 11:11 pm
OT: Sort Of, YouTube4/15/2016, 1:51 pm
Yarn bowl question4/15/2016, 8:17 am
strange turning tools *PIC*4/13/2016, 9:58 pm
sphere play *PIC*4/13/2016, 9:05 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*4/13/2016, 4:13 pm
turning preference4/12/2016, 9:20 am
Simple aid for turning spheres without a jig *PIC*4/11/2016, 10:16 pm
very old clock *PIC*4/11/2016, 1:03 pm
Tormek wheel4/11/2016, 12:50 pm
Elevated Vessel *PIC*4/11/2016, 10:26 am
really big spindle. *LINK*4/10/2016, 3:40 pm
newbie at pen turning-- RANT4/10/2016, 3:37 pm
Designing Spindles4/9/2016, 2:37 pm
The future of woodturning *NM* *LINK*4/8/2016, 11:40 pm
Anyone ever see Colin Schleeh in his shop? *LINK*4/8/2016, 5:35 pm
Unusual turning request: tire thumpers *PIC*4/8/2016, 4:45 pm
Totally Turning /Showcase 2016 *PIC*4/8/2016, 9:26 am
Some Tuirning-Some Not *PIC*4/6/2016, 8:54 pm
Don't Forget Turning Chat Tonight 9:30 Eastern4/6/2016, 4:57 pm
OneWay Chuck Spur drive maintenance *PIC*4/6/2016, 3:09 pm
Sphere vessel with spackling paste filler *PIC*4/6/2016, 1:44 pm
As Forrest Gump Would Say..... *PIC*4/5/2016, 2:12 pm
Back up4/5/2016, 11:53 am
Jacobs ladder4/4/2016, 9:58 pm
Shawo wooden bowl4/4/2016, 9:07 pm
Delta 46-460 speed control4/4/2016, 8:45 pm
Need to contact the legendary Robbo Hippy4/4/2016, 11:38 am
Great to see everyone in Saratoga4/4/2016, 10:27 am
ACC workshops *LINK*4/2/2016, 4:23 pm
Bob Ross woodturning *NM* *LINK*4/2/2016, 3:58 pm
Yet another new tool you gotta have *NM*4/2/2016, 2:12 am
first impressions with the Vermec sphere jig4/1/2016, 4:13 pm
Had to get some gifts made *PIC*4/1/2016, 11:52 am
Lee Valley's "new" tool *LINK*4/1/2016, 11:48 am
Here you go Alan- right up your alley :) *NM* *LINK*4/1/2016, 7:57 am
Yet another couple of spheres3/31/2016, 8:41 pm
Remote demonstration POC - Video *LINK*3/31/2016, 12:22 pm
OT - young guitarist3/31/2016, 10:45 am
Monster Lathe Tools3/30/2016, 11:11 pm
1000 grit CBN wheel3/30/2016, 6:23 pm
SAIT Sandpaper3/30/2016, 5:53 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*3/30/2016, 12:28 pm
"Potentially" dangerous question3/30/2016, 10:16 am
green wood bowl dilema3/29/2016, 9:53 am
The worst grind I've ever seen. *PIC*3/29/2016, 8:13 am
Looking for long drill bit source3/28/2016, 4:36 pm
Tailstock sliding, engineering design ?3/28/2016, 11:47 am
How long should your tool handle be? *LINK*3/27/2016, 5:27 pm
Turning Teak3/27/2016, 11:34 am
Small Clamp Deal3/26/2016, 10:59 pm
Life expectancy3/26/2016, 10:24 am
Very old piece *PIC*3/25/2016, 9:45 am
tired of spheres yet? *PIC*3/24/2016, 11:28 pm
Tribute to Wally *PIC*3/24/2016, 10:34 pm
Totally Turning Saturday Dinner -- Last Call3/24/2016, 7:12 pm
Carved, Turned lidded hollow form, Chrysalis *LINK*3/24/2016, 5:33 pm
Easy Chuck production issues3/24/2016, 5:15 pm
Steel City bench grinder first impressions *PIC*3/24/2016, 4:26 pm
I'lll be turning in my grave t shirt source3/24/2016, 3:46 pm
Hartville Tool deal *PIC*3/24/2016, 2:51 pm
Berger Sphere Caliper?3/24/2016, 2:22 pm
Wally Dickerman Passing3/24/2016, 9:34 am
scrapers *LINK*3/23/2016, 7:41 pm
Don't Forget Turning Chat Tonight 9:30 Eastern3/23/2016, 4:06 pm
Resin?3/22/2016, 6:56 pm
OT: Block Plane Question for Flat Woodworkers3/22/2016, 11:56 am
Beal Woodturning Scraper Set3/22/2016, 11:29 am
Sphere Jig Accessory Question3/22/2016, 7:57 am
OT vintage family picture story3/22/2016, 12:22 am
turning a sphere by hand *PIC*3/21/2016, 10:29 pm
Dust Collectors Again3/21/2016, 6:38 pm
My weekend *PIC*3/21/2016, 2:04 pm
Turning Meeting CNC *LINK*3/21/2016, 1:07 pm
OT for John Lucas - *LINK*3/21/2016, 10:57 am
lathe speeds for each tool3/21/2016, 12:02 am
Alisam index pin revisit3/20/2016, 5:12 pm
Finish for Lazy Susans3/20/2016, 3:08 pm
Lauren turning spheres3/19/2016, 10:34 pm
Big Island Woodturner's Turnin show in Hilo Hi3/19/2016, 1:37 pm
Ot.dads progress3/19/2016, 10:39 am
Nova 2024 Tool Slide3/19/2016, 9:42 am
Mirror *PIC*3/19/2016, 2:53 am
Powermatic on/off switch3/18/2016, 1:21 pm
GAW meeting3/17/2016, 4:00 pm
OT: ffffffffffffffffffffffffffffffffffff3/17/2016, 12:11 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*3/16/2016, 4:27 pm
Dust Collection Comparisions3/15/2016, 11:54 pm
Spring time in Peoria *PIC*3/15/2016, 9:48 pm
Hand Tool Chat, Every Tuesday Evening3/15/2016, 6:45 pm
tool rest question3/15/2016, 1:31 am
Alisam spring loaded index pin. *PIC*3/14/2016, 8:58 pm
Book matched mirrors *PIC*3/14/2016, 8:53 pm
Using the Big Ugly3/14/2016, 6:07 pm
my Thompson gouge is getting too short *PIC*3/13/2016, 1:03 pm
Grinder Light3/12/2016, 5:22 pm
should have waited to start back turning3/11/2016, 2:00 pm
Coring Device3/11/2016, 9:40 am
Powermatic lathe3/11/2016, 9:14 am
Don't Forget Turning Chat Tonight 9:30 Eastern3/9/2016, 2:05 pm
Which Osprey?3/9/2016, 1:53 pm
Powermatic won't start question3/8/2016, 12:47 pm
Lathe Problem3/7/2016, 6:58 pm
Dust Collection Advice Needed3/6/2016, 6:50 pm
OT, Music:3/6/2016, 2:16 pm
Help with 3520B3/5/2016, 10:17 pm
Practicing while you turn3/5/2016, 6:46 pm
Jet/PM Lathe sale3/4/2016, 2:33 pm
Big job finished *PIC*3/4/2016, 12:55 pm
Maple Burl3/4/2016, 11:33 am
Curious what has happened to Matthew Hill3/4/2016, 12:32 am
Remote demonstration POC3/3/2016, 6:26 pm
Latest turning - segmented container *PIC*3/3/2016, 1:14 pm
indexing problem3/3/2016, 11:13 am
Next time you go through bottom of bowl *LINK* *PIC*3/2/2016, 10:03 pm
PM 3520 Local Listing3/2/2016, 6:17 pm
Experimented on a BOC container by .......3/2/2016, 4:20 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*3/2/2016, 3:10 pm
Vacuum Setup3/2/2016, 1:25 pm
AAW dvd's3/2/2016, 8:47 am
I always thought lathes should be named by price3/2/2016, 8:27 am
PM 3520b dimension3/1/2016, 8:40 pm
“Yes, but it will be beautiful!” *LINK*3/1/2016, 5:41 pm
New Event Posted in "EVENTS"3/1/2016, 3:20 pm
THANK YOU!! / LATHE CHUCK ? *NM*3/1/2016, 9:25 am
lathe chuck ?3/1/2016, 12:53 am
Mushroom article in More Woodturning magazine *LINK* *PIC*2/29/2016, 6:59 pm
Harp designs candlesticks *LINK*2/28/2016, 7:37 pm
tree trunk removal2/28/2016, 12:39 pm
wheels on lathe ?2/28/2016, 12:20 am
Residue from Tape2/27/2016, 7:53 pm
Return from hawaii *PIC*2/26/2016, 6:14 pm
CBN wheels questions2/26/2016, 10:26 am
Second Beads of Courage box *PIC*2/25/2016, 6:26 pm
The Big Ugly Tool2/25/2016, 1:51 pm
Wet tools2/24/2016, 4:54 pm
Local want ads :) very original spelling *NM* *LINK*2/24/2016, 4:20 pm
Nichrome wire - woodburning2/24/2016, 3:49 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*2/24/2016, 11:37 am
Carbide tipped bandsaw blade2/24/2016, 10:59 am
Bandsaw Dust Ports Do Not Suck2/22/2016, 4:55 pm
New Posting in Events!2/22/2016, 9:32 am
[AD] Win a set of turning tools!2/21/2016, 1:48 pm
Something new for me *PIC*2/21/2016, 10:49 am
Big Thank You to John Lucas & John k Jordan *NM*2/20/2016, 6:49 pm
Mini mirror *PIC*2/20/2016, 11:02 am
turning with your eyes2/20/2016, 6:13 am
Question for john Lucas2/20/2016, 12:33 am
OT Boys in Beards *PIC*2/18/2016, 8:13 pm
practice ornament *PIC*2/17/2016, 9:53 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*2/17/2016, 2:39 pm
John Lucas Router Demo *LINK*2/17/2016, 1:19 pm
Green AO-Gold bar- Red Rouge stropping2/17/2016, 9:29 am
John Lucas2/16/2016, 9:29 pm
Glaser scraper for sale on Classifieds bd. *NM*2/15/2016, 10:00 pm
more hand mirrors *PIC*2/15/2016, 8:05 pm
Spalted spots2/15/2016, 11:46 am
Vicmar chucks2/15/2016, 11:04 am
Vicmar chucks2/15/2016, 10:49 am
My first "Beads of Courage" box *PIC*2/14/2016, 8:55 pm
sharpening sharper than ever2/14/2016, 4:35 pm
Beading Tool2/13/2016, 1:01 pm
Used machinery market2/13/2016, 10:23 am
Jet Mini Lathe Motor2/12/2016, 2:57 pm
20" disk sander2/12/2016, 1:46 pm
for you segmented turners *LINK*2/11/2016, 7:36 pm
more info on GRiz and chucks plus chucks.2/11/2016, 7:15 pm
Wally Dickerman2/11/2016, 11:51 am
Dinner Reservations for Saratoga Saturday, 4-2-162/10/2016, 9:22 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*2/10/2016, 4:32 pm
Center point when using a faceplate *PIC*2/10/2016, 1:07 pm
MDF chuck jaws *PIC*2/10/2016, 1:02 pm
Mirror handle problems and solutions *PIC*2/10/2016, 1:00 pm
Reed Gray has another good video2/10/2016, 9:32 am
Totally Turning -- Saratoga, NY -- April 2-3 *LINK*2/9/2016, 2:53 pm
sharpening a detail chisel *PIC*2/9/2016, 12:18 pm
Wally Dickerman2/9/2016, 4:06 am
Bean's Cafe Empty Bowl Project *LINK* *PIC*2/8/2016, 11:01 pm
Woodturning ad in super bowl *LINK*2/8/2016, 7:01 pm
OT Baking *LINK*2/8/2016, 3:38 pm
John Lucas on you-tube2/7/2016, 4:07 pm
New Turnings For the Past 3 days *PIC*2/6/2016, 9:57 pm
new mirrors *PIC*2/6/2016, 7:53 pm
Big Leaf maple Burl2/6/2016, 5:25 pm
Multi Axis? Facetnating! *PIC*2/5/2016, 6:03 pm
Beads in the morning-just a teaser *PIC*2/5/2016, 8:57 am
urns for ashes2/4/2016, 7:22 pm
ash log *PIC*2/4/2016, 11:22 am
OT a little wake up *LINK*2/4/2016, 10:20 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*2/3/2016, 3:10 pm
Segmented Sanding Sled *PIC*2/2/2016, 10:40 pm
John K Jordan and I went to the TAW symposium2/1/2016, 7:48 pm
Re-sawing segmented rings.2/1/2016, 11:17 am
segmented pieces2/1/2016, 10:35 am
Scraper handles:1/30/2016, 5:09 pm
Add Drawbar to #2MT Chuck?1/30/2016, 3:49 pm
Screw chuck1/30/2016, 1:04 pm
10" PSA Sanding Discs Help!1/30/2016, 9:10 am
Met our Grandson today *PIC*1/29/2016, 10:23 pm
Wood Coloring Question1/29/2016, 11:13 am
Ron's Brown Off Center Chuck System 1/28/2016, 7:46 pm
Mike Darlow Books1/28/2016, 5:48 pm
Skewchigouge Crown tools1/28/2016, 1:39 pm
Faceted Bubinga Sphere *PIC*1/27/2016, 11:16 pm
AAW Forum is down I think1/27/2016, 10:51 pm
CA glue1/27/2016, 8:29 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*1/27/2016, 4:07 pm
Ebonized oak sphere hollow forms *PIC*1/27/2016, 3:33 pm
OT Family excitement growing1/27/2016, 2:53 pm
New Spheres-*PICS* *PIC*1/27/2016, 11:17 am
Glow-In-The-Dark Shavings ?1/26/2016, 10:24 pm
wicked point tool *PIC*1/26/2016, 3:06 pm
indexing on jet 14421/26/2016, 9:20 am
Mike Darlow's books1/25/2016, 9:07 am
More indexing stuff...1/25/2016, 12:17 am
Classifieds Section for Wolverine stuff?1/24/2016, 7:22 pm
OT: 7.1 Alaskan Earthquake1/24/2016, 2:28 pm
grind angles *PIC*1/24/2016, 1:41 pm
Pie spatula *PIC*1/24/2016, 12:07 pm
Wood Gloat: Cuban Mahogany *PIC*1/24/2016, 12:45 am
Is everybody OK in the snow1/23/2016, 5:54 pm
using gouge upside down *PIC*1/22/2016, 11:47 pm
burning line comparison *LINK* *PIC*1/22/2016, 6:08 pm
Too much light in the studio1/22/2016, 2:11 pm
1st bowl of 2016 *PIC*1/22/2016, 2:07 pm
New mirrors *PIC*1/22/2016, 1:38 pm
OT: getting high in the snow *PIC*1/22/2016, 11:55 am
Thread Chasing?1/21/2016, 9:11 pm
sand and snow *PIC*1/20/2016, 8:09 pm
Dremel vacuum powered handpiece. *LINK*1/20/2016, 6:51 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*1/20/2016, 5:13 pm
Bad idea *PIC*1/20/2016, 5:11 pm
turning a cove on a spindle *PIC*1/20/2016, 9:59 am
Beads of courage boxes *PIC*1/19/2016, 8:22 pm
Wet Sanding on the Lathe1/19/2016, 8:14 pm
Laminated Stacked Bowl1/19/2016, 8:33 am
took advice on spindle vibration1/19/2016, 3:28 am
elm box *PIC*1/19/2016, 12:01 am
Christmas ornament *PIC*1/18/2016, 10:30 pm
grandkids and a warm shop *PIC*1/18/2016, 9:13 pm
Ideas for small work1/18/2016, 6:03 pm
My latest mirror *PIC*1/18/2016, 4:05 pm
New dates, location for Dayton Artistry in Wood1/18/2016, 2:22 pm
grinder1/18/2016, 12:21 pm
On or off?1/18/2016, 10:50 am
elm with figured center? *PIC*1/17/2016, 8:57 pm
Friday's output *PIC*1/17/2016, 12:05 am
Thinning Shellac1/16/2016, 7:53 pm
spindle turning vibration1/16/2016, 6:07 pm
TAW 2016 Woodturning Symposium change1/16/2016, 10:15 am
is anybody turning1/16/2016, 8:42 am
Latest piece is coming together slowly *PIC*1/14/2016, 7:26 pm
Site Changes?1/13/2016, 11:53 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*1/13/2016, 2:14 pm
Adult education classes at local high school *PIC*1/13/2016, 1:24 pm
Spalted wood cracking1/12/2016, 6:46 pm
PM3520b cost?1/12/2016, 5:38 pm
Whippet ornaments *PIC*1/12/2016, 2:59 pm
Sphere turning jig1/12/2016, 12:05 pm
Outrageous cost for parts1/12/2016, 11:41 am
Sale of Hand Made Turned Spheres *LINK*1/12/2016, 10:52 am
OneWay Lathe & Woodworking Equipment for Sale1/11/2016, 11:02 am
Strobe source for the lathe?1/11/2016, 1:01 am
It's hard work making money *PIC*1/10/2016, 2:16 pm
Jeff Salter's Easy Tracker laser guide *LINK*1/10/2016, 1:56 pm
rotating xy axis table *PIC*1/10/2016, 7:31 am
Anyone seen any video on Benoit Averly texturing? *LINK*1/9/2016, 6:53 pm
Hunter tools on Benefit Auctions *PIC*1/9/2016, 6:13 pm
celtic knot1/9/2016, 4:27 pm
Last years turnings *PIC*1/9/2016, 2:16 pm
Anyone Near Tupelo, MS?1/8/2016, 4:59 pm
interesting turning project *PIC*1/8/2016, 1:11 pm
Dremel Pantograph *PIC*1/7/2016, 7:25 pm
Nova 2 Chuck1/7/2016, 4:59 pm
white oak burl1/7/2016, 9:36 am
D-Way Tools customer service is outstanding!1/6/2016, 10:59 pm
making coins experiment1/6/2016, 7:57 pm
Glaser gouge, Batty scraper on Classified board *NM*1/6/2016, 5:52 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*1/6/2016, 5:22 pm
sphere jigs1/6/2016, 9:52 am
French Pinch *PIC*1/5/2016, 9:51 pm
making money- literally *PIC*1/5/2016, 7:34 pm
jam chuck *LINK*1/5/2016, 7:08 am
Shameless commerce1/4/2016, 9:40 pm
A question for you paint experts1/4/2016, 7:19 pm
More fun than watching paint dry1/4/2016, 1:21 pm
Thank you Reed Gray aka RoboHippy1/4/2016, 12:47 pm
Any laser guru's out there1/4/2016, 11:29 am
Help-Powermatic Lathe 3520B proximity sensor1/2/2016, 10:40 pm
Started a new piece today *PIC*1/2/2016, 7:17 pm
Spindle Gouge Differences1/2/2016, 6:54 pm
Ceramic insert tools now? *LINK*1/2/2016, 5:53 pm
Super Nova 21/2/2016, 4:28 pm
wise words from 3000 years ago...1/1/2016, 9:07 pm
OT, another use for the CBN wheel *PIC*1/1/2016, 2:28 pm
Cracked Blanks *PIC*1/1/2016, 12:15 pm
Are you trying something new this year1/1/2016, 9:57 am
Happy New Year12/31/2015, 8:52 pm
I'm back on the grid12/31/2015, 8:21 pm
stylus tips12/31/2015, 10:00 am
Two new lathe models12/30/2015, 8:33 pm
OK pen turners, I need help12/30/2015, 7:41 pm
Ugly Cracked Bowls...12/30/2015, 6:23 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*12/30/2015, 4:24 pm
chuck cleaning12/30/2015, 10:58 am
kirsten Kone12/29/2015, 11:55 pm
Interesting turning sites and work12/29/2015, 7:12 pm
tail stock swing away12/29/2015, 11:13 am
Tail Stock Quill12/28/2015, 10:34 pm
Poweder metal or stone for voids12/28/2015, 10:27 am
vacuum chucks12/27/2015, 8:31 pm
Three tools on Benefit Auctions *PIC*12/27/2015, 7:46 pm
Woodturning for kids *PIC*12/25/2015, 11:23 pm
Making a branding iron for wood *PIC*12/25/2015, 8:47 pm
Hunter #1 Retrofit Caution12/25/2015, 11:48 am
Christmas Ornament Stand *PIC*12/25/2015, 11:46 am
In search of han threading tools12/25/2015, 4:06 am
Merry christmAs from Texas...12/25/2015, 12:50 am
Merry Christmas!12/24/2015, 6:43 pm
Antler brush12/24/2015, 3:09 pm
Ornaments, chip carved. *PIC*12/24/2015, 12:02 pm
Merry Christmas12/24/2015, 8:59 am
Merry Christmas and Happy Holidays12/24/2015, 12:30 am
Bowls for Christmas *PIC*12/23/2015, 11:14 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*12/23/2015, 2:58 pm
last Christmas gift *PIC*12/22/2015, 7:35 pm
Conductor's batons *PIC*12/22/2015, 1:45 pm
band saw blade tension lock-up12/21/2015, 8:04 pm
Whistle Key Ring12/21/2015, 8:03 pm
Inside out turnings12/21/2015, 6:35 pm
Do you worry about breakage of work12/21/2015, 7:10 am
I'm In Trouble *PIC*12/20/2015, 7:30 pm
Chuck Adapter12/20/2015, 3:56 pm
One of those days12/20/2015, 12:44 pm
check spun off spindle12/19/2015, 5:05 pm
broken consignment bowl *PIC*12/18/2015, 7:08 pm
every had a project that just frustates you12/18/2015, 9:50 am
big bowl *LINK*12/17/2015, 11:57 pm
Worth Another Look - Long *PIC*12/17/2015, 11:03 am
Duck Call question12/17/2015, 10:18 am
Auctions close today and tomorrow12/17/2015, 9:44 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*12/16/2015, 2:29 pm
CWA call for artists for SOFA 201612/14/2015, 8:16 pm
Friction burning on a slope with a wire *PIC*12/13/2015, 10:35 pm
Myrtle bowl *PIC*12/13/2015, 7:14 pm
for the kindergartners *PIC*12/12/2015, 9:57 pm
Sealing cocobolo ... toxicity12/12/2015, 8:53 am
developing a new tool12/11/2015, 5:09 pm
roughing gouge12/11/2015, 4:05 pm
Apprentice12/11/2015, 1:09 pm
Ryobi planer ?12/10/2015, 7:59 pm
different style ornament *PIC*12/10/2015, 5:56 pm
what do you do with non figured woods12/10/2015, 8:09 am
step pullys12/9/2015, 10:58 pm
Pen turning tools for kids?12/9/2015, 2:36 pm
parts for lathe12/9/2015, 1:55 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*12/9/2015, 1:09 pm
OT Talk about slow12/9/2015, 12:38 pm
new ornaments *PIC*12/8/2015, 9:39 am
Wrapping For Shipping12/8/2015, 8:45 am
Lucas shop *PIC*12/7/2015, 11:12 am
Cracked ferrule12/6/2015, 7:48 pm
Small footed platters *PIC*12/5/2015, 12:18 am
Easy Wood Tools on Benefit Auctions *PIC*12/3/2015, 7:45 pm
Turning non ferrous metals on the lathe *PIC*12/3/2015, 3:43 am
Don't Forget Turning Chat Tonight 9:30 Eastern12/2/2015, 6:29 pm
OT: LEGOs12/2/2015, 5:36 pm
8" Slow Speed Grinder?12/2/2015, 3:47 pm
A nest of burl bowls... *PIC*12/2/2015, 2:50 pm
sharpening beading tools12/2/2015, 10:10 am
Big leaf maple12/1/2015, 11:28 pm
Tool storqge12/1/2015, 8:29 pm
Virtual 3D Idea Now Actual 3D Object *PIC*12/1/2015, 6:42 pm
Riving wood *PIC*11/30/2015, 6:03 am
Thank you John Lucas11/28/2015, 8:47 pm
what carbide tool for woodturning rough turning11/28/2015, 6:33 pm
routed technique I'm working on. *PIC*11/27/2015, 7:36 pm
More ornaments *PIC*11/27/2015, 7:26 pm
happy turkey day everyone11/26/2015, 4:54 am
Tool size for mini lathes11/26/2015, 12:20 am
smuggling cigarettes in logs *LINK*11/25/2015, 3:52 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*11/25/2015, 3:35 pm
Observation, it takes 2 computers to keep one 11/25/2015, 11:39 am
Yep happens to us all. *PIC*11/25/2015, 8:29 am
sharpening your carving tools *PIC*11/25/2015, 8:26 am
maple tree *PIC*11/25/2015, 8:24 am
Chris Ramsey demo in Knoxville *PIC*11/25/2015, 8:10 am
Potential chuck problems11/24/2015, 10:24 pm
Jet 1014 Log Size?11/24/2015, 6:21 pm
Identify this wood? *PIC*11/24/2015, 5:59 pm
Unusual "wood" *PIC*11/24/2015, 10:27 am
A discovery about lathe alignment11/24/2015, 7:46 am
What kind of wood is this?11/23/2015, 9:31 pm
Personal reinvention again? Argh11/22/2015, 7:31 pm
very funny *LINK*11/22/2015, 6:58 pm
Bowl with carved handles and feet, 1st try *PIC*11/22/2015, 2:01 pm
Affordable ($350) 3D Printer - Finally *PIC*11/22/2015, 12:53 pm
earring stand plan for future reference *LINK*11/21/2015, 1:11 pm
Preferred laminate trimmer or router for flutes11/19/2015, 11:42 pm
Christmas 2015 ornaments *PIC*11/19/2015, 1:33 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*11/18/2015, 1:49 pm
Christmas Exchange11/17/2015, 10:40 am
advice about the motor change11/17/2015, 6:52 am
Chuck selection question11/15/2015, 9:46 pm
Alisam index wheel review *PIC*11/15/2015, 7:16 pm
Another little "Brad Vietje" ornament *PIC*11/15/2015, 7:06 pm
Needing Vacuum Chuck Help11/15/2015, 6:02 pm
Stubby 750 Available - NJ11/14/2015, 1:11 pm
OT for Brad Vietje11/13/2015, 8:53 am
spheres *PIC*11/12/2015, 11:02 pm
Need New Camera! *PIC*11/12/2015, 7:59 pm
UV light for wood ID *PIC*11/12/2015, 7:36 pm
Prices of hollowing systems11/12/2015, 3:18 pm
Anybody turned persimmon?11/12/2015, 8:07 am
More laser engraving *PIC*11/11/2015, 10:44 pm
VeteransDay....Armistice Day11/11/2015, 7:47 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*11/11/2015, 2:16 pm
New Woodturning FUNdamentals is out... *LINK*11/11/2015, 2:14 pm
Tung oil11/11/2015, 2:11 pm
Dragonfly bowl *PIC*11/11/2015, 12:33 pm
Threaded lid sphere box *PIC*11/11/2015, 12:12 am
Latest Lampshade *PIC*11/10/2015, 6:01 pm
Slicing and Dicing a Burl? *PIC*11/10/2015, 1:50 pm
Slimlines for vets *PIC*11/10/2015, 12:06 am
end grain to end grain gluing *PIC*11/9/2015, 11:07 am
church urn for ashes11/9/2015, 10:13 am
Indexing for Jet 1642 - Lucas? *PIC*11/8/2015, 11:57 pm
Boring end grain *LINK*11/8/2015, 11:48 pm
A great day at SOFA Chicago11/8/2015, 12:13 am
turning a ear ring stand11/6/2015, 8:56 pm
oy! is it humid!11/5/2015, 9:04 pm
Tutor or mentor near Colorado Springs?11/5/2015, 10:57 am
end grain glue-up for chip carving *PIC*11/4/2015, 10:21 pm
shots of my new shop *PIC*11/4/2015, 7:35 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*11/4/2015, 3:38 pm
wipe On vs Regular Poly11/4/2015, 8:51 am
Expensive Rigid lathe *LINK*11/4/2015, 12:26 am
So I was watching Roy Underhill.....11/3/2015, 6:34 pm
Video reviewers needed11/3/2015, 6:20 pm
New Lathe for John Lucas *PIC*11/2/2015, 8:35 pm
LED lights may be indestructable11/2/2015, 7:31 pm
secret santa11/2/2015, 2:50 am
personal air filters11/1/2015, 11:08 pm
OT (maybe ) Air Compressors11/1/2015, 9:33 pm
WAY OT, Again -- Haloween Near-earth Asteriod *LINK*11/1/2015, 2:11 pm
WoodCentral Secret Santa11/1/2015, 1:30 pm
Thanks for the comments11/1/2015, 1:07 pm
gary's wood bleach10/31/2015, 6:08 pm
Do faceplate threads need to be fully seated?10/31/2015, 1:49 pm
Grinding Wheels questions10/31/2015, 8:53 am
How To Read Measurments *LINK*10/30/2015, 10:29 am
I needed a coat rack for the new shop *PIC*10/30/2015, 10:23 am
Not just another pile of wood (Gloat) *PIC*10/29/2015, 3:58 am
Turning Chat Is Having Problems10/28/2015, 9:27 pm
Tonight's Turning Chat10/28/2015, 4:38 pm
Turning Chat -- Server issues10/28/2015, 1:38 pm
finally have dust collection- shop is almost ready *PIC*10/27/2015, 7:43 pm
Plum *PIC*10/26/2015, 9:53 pm
"Choir boys" *PIC*10/26/2015, 8:50 pm
Gouge breaks in half. This happen to anyone? *PIC*10/26/2015, 2:12 pm
Pens with my signature blanks *PIC*10/26/2015, 9:49 am
Jet 1642 VFD is cold and dead10/25/2015, 11:10 pm
CA Glue Nozzle--The Sequel10/25/2015, 12:00 pm
old man tinker toys, or Erector set10/24/2015, 3:48 pm
when is art too artsy.. ?10/24/2015, 3:38 pm
Faceplates - Kuhlemeier10/23/2015, 12:57 pm
Sweet seventeen10/23/2015, 11:10 am
Sharpening A Gouge10/23/2015, 8:53 am
what, ya think, will it sell *NM* *LINK*10/23/2015, 7:22 am
working on my dust collection10/22/2015, 9:51 pm
he has only sharpened the tool twice in 8 months *LINK*10/22/2015, 9:48 pm
CBN wheels on Rikon grinder10/22/2015, 11:34 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*10/21/2015, 3:42 pm
OT one in a million plumbing story10/21/2015, 2:53 pm
VFD Powewrmatic 3520a VFD problem10/20/2015, 8:13 pm
Prepping Wood For Hollow Turning10/20/2015, 4:47 pm
Bacon Tool Handle *LINK*10/19/2015, 6:02 pm
ornament save trick *PIC*10/19/2015, 7:16 am
first new work in new shop *PIC*10/19/2015, 6:59 am
Sick Jet10/18/2015, 6:18 pm
Wood central inspired bowl embellishment *LINK* *PIC*10/18/2015, 4:47 pm
Sorry for the outage10/18/2015, 12:22 pm
finally turning again10/16/2015, 8:30 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*10/14/2015, 3:16 pm
[AD] Klingspor's 15th Annual Extravaganza!10/13/2015, 3:56 pm
OT(somewhat) - battery operated tools10/13/2015, 11:15 am
can you help?10/13/2015, 9:58 am
Hi my name is John and I'm addicted to drill bits. *PIC*10/11/2015, 8:07 pm
infested with ugly warts *PIC*10/10/2015, 9:00 pm
Turned candle holders10/10/2015, 2:30 pm
First trial of my Trent Bosch Visualizer knock-off10/9/2015, 9:53 pm
WTB: VM oval turning device10/9/2015, 1:30 pm
I put 45 outlets in my shop and it's not enough10/9/2015, 8:11 am
Way OT: name of a tool10/7/2015, 8:13 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*10/7/2015, 6:13 pm
wheels for Powermatic *PIC*10/7/2015, 5:31 pm
Sharpening a Hook Nosed Scraper10/7/2015, 11:09 am
Nexabond glue10/7/2015, 1:34 am
Flooding in the Carolinas ... 10/6/2015, 2:57 pm
Illustrations on your photos/images10/6/2015, 2:19 pm
Punky Wood10/6/2015, 1:10 pm
Wax Rough-Turned Bowl Blanks10/6/2015, 1:05 pm
my 18th century copy...10/6/2015, 1:34 am
lathe for sale *LINK*10/5/2015, 8:46 pm
Shop is really getting set up *PIC*10/4/2015, 6:02 pm
Dinnerware *PIC*10/4/2015, 5:32 pm
The Science of Shear Scraping *LINK*10/2/2015, 9:19 pm
For John Lucas - clamp storage *PIC*10/1/2015, 4:46 pm
OT: carpentry10/1/2015, 4:35 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*9/30/2015, 2:01 pm
Lamp loaders9/30/2015, 11:20 am
Moved everything into the new shop9/29/2015, 7:08 pm
Tall and hollow9/29/2015, 5:34 pm
matching an 18th century leg9/29/2015, 11:42 am
Help Please, My Jet Mini needs a New cap!9/29/2015, 11:01 am
Way OT: Lunar Eclipse *LINK* *PIC*9/28/2015, 5:12 pm
This is cool *LINK*9/27/2015, 5:30 am
Beall Buffing9/26/2015, 8:33 pm
Started moving into the shop today9/26/2015, 7:07 pm
How does the OneWay live center come apart? *PIC*9/25/2015, 5:30 pm
Cleaning CA Glue Tips9/24/2015, 6:21 pm
PM 35209/24/2015, 12:40 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*9/23/2015, 3:31 pm
Live centers9/21/2015, 10:28 am
FWIW, more ash toast9/20/2015, 10:19 pm
Pepper Mills *NM*9/20/2015, 8:09 pm
Shop walls going up *PIC*9/20/2015, 7:10 pm
Pepper Mills 9/20/2015, 12:21 pm
Burning shavings from the lathe9/18/2015, 5:18 pm
Headed out to the Georgia Symposium9/18/2015, 8:22 am
should I buy these *LINK*9/16/2015, 4:04 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*9/16/2015, 3:49 pm
Doesn't anyone want to work anymore9/16/2015, 10:44 am
wood identity *PIC*9/15/2015, 4:32 pm
HELP with wiring Poolwood Lathe9/14/2015, 5:56 pm
Practicing my thin turning *PIC*9/14/2015, 5:34 pm
monolith II *PIC*9/12/2015, 5:34 pm
Retirement Gold Watch9/12/2015, 2:10 pm
Mineral spirits that looks like milk9/11/2015, 11:23 pm
Purpleheart9/11/2015, 9:57 pm
This is hilarious *LINK*9/11/2015, 7:10 am
recommendations, please...9/11/2015, 12:44 am
Lights in my shop *PIC*9/10/2015, 8:27 pm
question on chain saw sharpeners9/10/2015, 3:57 pm
Granddaughters Project *PIC*9/10/2015, 10:09 am
Ceiling is painted-whew9/9/2015, 6:31 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*9/9/2015, 2:09 pm
OT Gravity water purifiers, any experience? *LINK*9/8/2015, 12:37 am
Anyone turning in a yurt?9/7/2015, 8:08 pm
Ray Leier passes away9/7/2015, 5:10 pm
Urns9/7/2015, 3:09 pm
New bench dog *PIC*9/7/2015, 2:42 pm
Finish for bradford pear?9/5/2015, 11:34 am
shop ceiling in. *PIC*9/4/2015, 5:48 pm
Excellent video by Lyle *LINK*9/4/2015, 4:54 pm
Scam or ?9/3/2015, 5:56 pm
inspired by john jordons chuck9/2/2015, 10:53 pm
Chucks?9/2/2015, 6:49 pm
Don't Forget Turning Chat Tonight 9:30 Eastern9/2/2015, 1:41 pm
Turning items for a new kitchen 9/1/2015, 3:38 pm
Wooden Korean Pottery Wheel finished *LINK*9/1/2015, 2:25 pm
Bowl blanks9/1/2015, 9:48 am
[AD] 3rd Annual Robust Tools Open House8/31/2015, 10:07 pm
Put up 8 celing panels today8/31/2015, 7:30 pm
OT The cost of pickups8/31/2015, 5:33 pm
buttons.. *PIC*8/31/2015, 12:34 pm
Toys & Tops -- Minimum Size?8/29/2015, 12:49 pm
Shop is really moving now. *PIC*8/28/2015, 7:48 pm
I have been putting shellac on my Face....8/28/2015, 12:20 pm
I know I shouldn't laugh-but8/27/2015, 6:41 pm
oval oak bowl *PIC*8/26/2015, 4:04 pm
Don't Forget Turning Chat Tonight 9:30 Eastern8/26/2015, 2:46 pm
Finally finished turning that red oak log *PIC*8/26/2015, 12:17 pm
Tear Out? *PIC*8/26/2015, 11:33 am
Turquoise real vs Inlace 8/26/2015, 11:09 am
This just in -- lots of possibilities here *LINK*8/25/2015, 10:40 am
who went to swat LAST year?8/25/2015, 2:30 am
Lidded Box *PIC*8/24/2015, 3:31 pm
no connection, but Oneway lathe in Florida *LINK*8/23/2015, 12:54 am
Shop Update8/22/2015, 7:14 pm
River birch8/21/2015, 8:38 pm
red oak hollow spheres *PIC*8/20/2015, 5:01 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*8/19/2015, 4:08 pm
who's going to swat?8/19/2015, 4:03 pm
Turning School8/19/2015, 3:48 pm
FREE Woodcraft Trashcan Cyclone *PIC*8/19/2015, 3:34 pm
John Lucas demo in Knoxville *PIC*8/19/2015, 12:08 am
Regrets? I've had a few *PIC*8/18/2015, 8:22 pm
Bleached wood article in aaw?8/17/2015, 3:47 pm
Storage of finished turnings8/16/2015, 2:33 pm
OT really big news for our family *PIC*8/14/2015, 10:36 pm
shop is moving fast now8/14/2015, 5:28 am
hearing bowls drying8/12/2015, 10:28 pm
Don't Forget Turning Chat Tonight 9:30 Eastern8/12/2015, 2:49 pm
Chat room works8/11/2015, 9:30 pm
Sorta OT-but interesting project *PIC*8/11/2015, 3:40 pm
PM 3520 speed switch8/10/2015, 1:38 am
New Work 4 in 1 *PIC*8/9/2015, 8:01 pm
Metal Effects8/9/2015, 7:20 pm
New Work8/7/2015, 1:29 pm
Seam ripper o-ring dry-out8/7/2015, 10:50 am
New Chatroom8/7/2015, 9:17 am
A curious experience with Inlace8/6/2015, 12:18 pm
VEGA Professional Model Lathe Duplicstor8/6/2015, 6:58 am
Made huge headway on the shop today8/5/2015, 7:07 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*8/5/2015, 3:14 pm
Second lesson, first bowls *PIC*8/4/2015, 10:19 pm
OT: Delta Machinery8/4/2015, 1:06 pm
New video on grinds for skews *LINK*8/4/2015, 11:06 am
English/European Walnut8/3/2015, 9:59 pm
Dowsing rod for tools8/2/2015, 5:41 pm
Oak surprise *PIC*8/2/2015, 2:47 pm
Side effect of big bowl commissions *PIC*8/2/2015, 2:42 pm
Finish Help! - Spar urethanes8/2/2015, 1:53 pm
stack-o-salad bowls *PIC*8/1/2015, 12:27 pm
shop is coming along *PIC*7/31/2015, 8:15 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*7/29/2015, 3:36 pm
Scolarships for military veterans *LINK*7/29/2015, 11:43 am
ACC workshops *LINK*7/29/2015, 7:36 am
hole size for tapping7/27/2015, 7:18 am
Website update - more stuff *LINK*7/26/2015, 9:49 pm
OT: Need Web Site Help7/25/2015, 8:33 pm
Moisture Regain?7/23/2015, 10:45 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*7/22/2015, 4:34 pm
whats a good wood for carving?7/21/2015, 3:26 pm
Papa Grizzly sent a message!7/20/2015, 1:40 pm
The Thrill Is Gone7/20/2015, 1:14 am
lighting for my shop7/19/2015, 8:39 pm
Woodturning Issue 277 Mar-157/19/2015, 4:59 pm
Can Inlace nuggets be crushed?7/19/2015, 10:01 am
Powermatic Lathes made in Taiwan7/19/2015, 3:23 am
client dropped off a log section today *PIC*7/18/2015, 7:26 pm
Safety Shield7/18/2015, 7:02 am
Help for SWAT?7/17/2015, 11:42 am
shop progress *PIC*7/17/2015, 10:24 am
Kiln dried vs air dried vs ...7/17/2015, 1:59 am
Free shipping7/16/2015, 4:36 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*7/15/2015, 1:42 pm
Couple of turnings *PIC*7/14/2015, 9:08 pm
Durable finishes7/14/2015, 3:25 pm
owls *PIC*7/14/2015, 3:20 pm
workshop rebuild finally starting *PIC*7/14/2015, 3:18 pm
OT- Smart phone and service suggestions please7/11/2015, 1:01 pm
Pure Grizzly entertainment7/11/2015, 12:52 am
River birch7/10/2015, 11:11 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*7/8/2015, 3:18 pm
my new carving chuck.. :)7/7/2015, 2:55 pm
Turned earring rack magazine article7/4/2015, 3:51 pm
report on new shop and garage7/3/2015, 7:19 pm
Happy 4th, Celebrate USA!! *NM*7/3/2015, 5:31 pm
key for a supernova chuck or g3? and more help..7/1/2015, 6:53 pm
Is Turning Chat Dead?7/1/2015, 2:31 pm
Steven mentioned this turner/sculptor *LINK*7/1/2015, 11:50 am
Shift Knob6/30/2015, 5:23 pm
Now for something completely different *PIC*6/29/2015, 10:03 pm
Nothing broken, noting missing6/29/2015, 2:02 pm
AAW6/28/2015, 9:54 pm
Thank you AAW, great show!! *NM*6/28/2015, 7:57 pm
ca glue6/27/2015, 9:38 am
Grinder trouble6/26/2015, 4:39 pm
Using live video in woodturning6/25/2015, 11:56 pm
BurnMaster Pen Failures6/25/2015, 6:07 pm
Russ Fairfield heir apparent 6/24/2015, 11:18 pm
Pittsburgh6/23/2015, 8:00 pm
general seal a cell6/23/2015, 4:01 pm
Mirror question for John Lucas6/23/2015, 12:19 pm
Latest project *PIC*6/22/2015, 3:09 pm
bandsaw6/21/2015, 9:29 am
Anyone got an extra chuck?6/20/2015, 6:13 pm
can't post a link to my latest skew video6/19/2015, 8:12 pm
New Brian Havens skew video *LINK*6/19/2015, 5:57 pm
Joy's House Bowl *PIC*6/19/2015, 2:23 pm
"BIG" order *PIC*6/18/2015, 10:35 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*6/17/2015, 8:19 am
Lauren's WIT egg submission *PIC*6/17/2015, 7:11 am
Dumb question #276/16/2015, 5:17 pm
New video from Lyle *LINK*6/16/2015, 12:13 am
Gone batty *PIC*6/15/2015, 1:18 pm
Cuttin Wood Video !6/14/2015, 8:53 pm
Bass wood6/14/2015, 9:18 am
Wood turning video6/13/2015, 9:17 pm
OT A tough TV show to watch6/12/2015, 11:47 pm
Updated Website6/12/2015, 12:49 pm
wood vaporizer6/11/2015, 10:22 pm
Vacuum Pump Question - New one I am Sure!6/11/2015, 6:49 pm
Turning Chat Room Status6/10/2015, 4:14 pm
June Bug's bowl *PIC*6/9/2015, 12:27 pm
large celtic knot6/8/2015, 11:52 am
For Sale 13 VHS Woodturning Tapes6/8/2015, 10:44 am
Red stuff *PIC*6/7/2015, 10:09 pm
Thanks John Lucas6/7/2015, 6:52 pm
Best gouge for back-hollowing cut? (end grain)6/7/2015, 2:14 pm
magnolia turning black6/7/2015, 8:09 am
Hey PaPa, How about turning something?6/5/2015, 7:19 pm
Got some Oak planks and split a ton *PIC*6/4/2015, 12:24 pm
Dale Larson website?6/3/2015, 7:35 pm
craftsman 15" lathe parts availability6/3/2015, 6:52 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*6/3/2015, 1:46 pm
Well This Doesn't Happen Every Day (Burl Gloat) *PIC*6/2/2015, 3:21 pm
Bandsaw maintenance6/2/2015, 3:06 pm
More Woodturning magazine *LINK*6/1/2015, 7:32 pm
We haven't had a good OT in while *LINK*6/1/2015, 5:50 pm
Happy Anniversary!6/1/2015, 3:24 pm
What computer and features do you have/prefer?6/1/2015, 2:23 am
band saw blade jumps off the lower tire5/31/2015, 11:31 am
Lightning Link: Absolutely, Completely OT *LINK*5/30/2015, 10:39 pm
tailstock adapter5/30/2015, 9:04 pm
adding weight5/30/2015, 9:30 am
tailstock adapter5/29/2015, 5:21 pm
X-Mas Tree Ornaments -- Variations *PIC*5/28/2015, 8:29 pm
Had a great time teaching yesterday5/28/2015, 8:32 am
How to demonstrate woodturning5/27/2015, 3:05 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*5/27/2015, 2:31 pm
Wood score *PIC*5/27/2015, 1:57 pm
OT vbelt5/27/2015, 11:00 am
Interesting adaptor *LINK*5/27/2015, 7:44 am
laser pointers5/27/2015, 5:33 am
Aspen Lamp Shade Photo Essay *PIC*5/26/2015, 2:42 pm
Gouge question *PIC*5/26/2015, 10:43 am
wood shed taking shape *PIC*5/25/2015, 6:27 pm
Interesting turning project *LINK*5/25/2015, 4:54 pm
wood ID5/24/2015, 8:19 pm
Memorial Day Tribute *PIC*5/24/2015, 4:15 pm
work started on my garage5/22/2015, 8:40 pm
New work *PIC*5/22/2015, 2:48 pm
I have a folder called Some of my favorite Trees, *LINK*5/21/2015, 5:39 pm
Shavings! *PIC*5/21/2015, 10:07 am
Don't Forget Turning Chat Tonight 9:30 Eastern5/20/2015, 2:31 pm
Mystery Wood5/19/2015, 1:30 pm
Powermatic 3520 208 single or three phase opinions5/18/2015, 6:45 pm
Lost my wife this morning5/18/2015, 6:59 am
Hawaiian Quilt Design *PIC*5/18/2015, 2:00 am
Portable Generator for Mini Lathe?5/16/2015, 3:52 pm
Steven Kennard video worth watching5/14/2015, 5:33 pm
Chat Room5/13/2015, 9:37 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*5/13/2015, 2:02 pm
wood storage shed *PIC*5/13/2015, 11:56 am
More video clips5/12/2015, 12:58 pm
OT gas mixes5/12/2015, 11:41 am
Woodturning subscription5/12/2015, 10:45 am
Progress report *PIC*5/12/2015, 8:11 am
Utah Woodturning Symposium5/11/2015, 12:09 am
Finish for Turned beer mug5/10/2015, 7:59 pm
Deft Finish5/10/2015, 2:54 pm
Wish List for Vacuum Chucking5/10/2015, 1:02 pm
Fossil ivory for inlay5/9/2015, 1:43 pm
OT Eye on the weather *LINK*5/8/2015, 11:32 am
New England Woodturning Symposium Saturday5/7/2015, 12:03 pm
cupcake stand *PIC*5/7/2015, 10:39 am
"Gold" veins??5/7/2015, 9:17 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*5/6/2015, 12:44 pm
R U Looking for a larger lathe?5/5/2015, 10:28 am
Dust Collection Ideas needed5/5/2015, 10:18 am
Quick, I need a word...5/5/2015, 12:43 am
Doug Thompson Update5/2/2015, 6:55 pm
Can I say I have a new YouTube clip?4/17/2015, 2:23 pm
1 2 3 4
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081