Dominic in Bucks County PA
>Bob,

Thanks for the compliments!

You wrote:

"That method does not seem to have that problematic?...

It also does'nt seem to leave a tell tale coloration like some chemical products."

Evaporust DOES leave the surface a bit "gray". But it buffed out quite easily. Also, you need to wash the items off thoroughly after you remmove them to get rid of the "slime" left from the de-rusting process. The big thing is to coat them with 3-in-1 oil after you wire brush them. This really helps to eliminate any "instant rusting" you would see.

BTW, I got my Eavporust from the local Harbor Freigh Store. Check and see if there is one in your neighborhood.

See ya around,

Dominic