Hand Tools Archive

Re: ANDY Router Plane
Response To:
Re: ANDY Router Plane ()

William Duffield
There was discussion and I posted pictures on Badger Pond. That's probably why you can't find it. My old notes from Y2K indicate that Brian Buckner was involved in the discussions and had also built one.

The blade mounting post on mine was not perpendicular to the base (my notes say it was off by about 8°), so I straightened it to some extent and also gave it a better grip on the blades with a square cross section Swiss pattern file. The thumb screw on the blade holding ring was not the one supplied with the kit. I found it in my assortment of spare hardware. sites.

Curiously, I can't find the #98 and #99 Side Rabbet Planes on Lie-Nielsen's website.

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.