Hand Tools Archive

Subject:
Re: First stab or two
Response To:
First stab or two ()

david weaver
Looks pretty good. It's an interesting problem to get that a little taller and flatter (angle wise vs. the face of the board) and still get some registration.

The bead for registration could be set into the top of the board (with the board left a little bit thick) so that you have it at the bottom of the cut for the final passes, and then plane off the additional thickness (and bead) with it.

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081