Hand Tools Archive

Subject:
My apologies for being a bit too harsh..
Response To:
Re: Traditional Method ()

David Weaver
I could've been a lot more brief and less harsh,band should have.

The case here about the sharpening is still true, though. The website, or two oilstones, or whatever else ....They are functionally superior to all of the modern techniques. Both with flat tools, and especially when you get away from flat tools into gouges, nickers, etc. All of that stuff is relatively simple with a single method.

To sharpen with speed and be able to do it with speed the next cycle, we are looking to prevent damage and remove only what we need to. Once you get to there, things move a lot faster. It just takes a month or so to perfect the skill and learn the feel of the stone.

It's worth troubling through the learning curve and finding out why a typical washita stone has far more miles on it than the average synthetic vintage bench hone.

As to why Norton won't mine and cut, I guess they can't sell a skill based stone to a mostly unskilled market. If Dan kirchner had access to the perryn formation, stones would be pouring out of it. Norton has become hit or miss with their fine Arkansas stones, and I wouldn't be surprised to see them stop those, too.

Aside from that, if someone has ever gotten a tool from me and found it to be dull or poorly prepared, I'd be surprised, but I'm sure open to honest criticism. I lay a washita edge on all of those tools before they go out the door.

Messages In This Thread

flattening Waterstones- shapton pro
Another possibility presents itself......
CBN plates
Re: Not making sense..
Re: Not making sense..
Re: Not making sense..
Diamond wear
Re: Diamond wear
Re: Diamond wear
Re: Diamond wear
What a great thread this has been.....
Re: What a great thread this has been.....
well then....
Re: What a great thread this has been.....
Re: What a great thread this has been.....
Traditional Method
Re: Traditional Method
Re: Traditional Method
Re: Traditional Method
Re: Traditional Method
Re: Traditional Method
Re: Traditional Method
My apologies for being a bit too harsh..
Re: Washita vs soft Arkansas stones...
Re: Washita vs soft Arkansas stones...
Re: Washita vs soft Arkansas stones...
Re: Washita vs soft Arkansas stones...
Re: Traditional Method
Re: Traditional Method
Re: Traditional Method *LINK* *PIC*
Re: Traditional Method
Re: Traditional Method
Re: Traditional Method
Re: Traditional Method
a little bit the Indian and a little bit arrow
Re: a little bit the Indian and a little bit arrow
which side to use?
Re: which side to use?
Re: which side to use?
Re: which side to use?
Quick and dirty summary:
Atoma - $64
Sandpaper Flattening & Shaptons
Re: Sandpaper Flattening & Shaptons
Stearate coating
Re: Stearate coating
Re: Stearate coating
Re: Stearate coating
Re: Stearate coating
Plastic laminating sheet
Re: Sandpaper Flattening & Shaptons
Re: Sandpaper Flattening & Shaptons
Re: Atoma - $64
Re: Quick and dirty summary:
Re: flattening Waterstones- shapton pro
A different perspective *LINK*
Re: A different perspective
Re: A different perspective
My thoughts
CBN and grit
How Are You Cleaning The CBN Wheel . . .
Re: How Are You Cleaning The CBN Wheel . . .
Re: How Are You Cleaning The CBN Wheel . . .
Why grind unhardened steel on CBN?
Re: Why grind unhardened steel on CBN?
Re: How Are You Cleaning The CBN Wheel . . .
The flat wheel surface - or not..
Re: The flat wheel surface - or not..
Re: The flat wheel surface - or not..
Re: The flat wheel surface - or not..
Re: My thoughts
Re: My thoughts
My Opinion...
Re: My Opinion...
Re: A different perspective
Not universal preference
to date
Re: to date
Re: to date
Re: to date
:) *NM*
Re: to date
Re: to date
lapping film?
Re: lapping film?
Re: lapping film?
Re: lapping film?
you are not kidding!
Re: flattening Waterstones- shapton pro
Yes, this
Diamond plates......
Re: diasharp vs. diaflat
Re: diasharp vs. diaflat
Re: I think...
Re: I think...
Flattening
Diamond plates
Re: Diamond plates
Revise atoma price...
Re: Revise dia-sharp price...
Re: flattening Waterstones- shapton pro
Re: flattening Waterstones- shapton pro
Re: flattening Waterstones- shapton pro
Re: flattening Waterstones- shapton pro
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081