Hand Tools Archive
Subject:
to dateResponse To:
Not universal preference () Joseph Piotrowski
I starting out with this configuration as it was all my budget i could do right now:
shapton kuromaku:
320
1000
5000
12000
i do have a DMT diamond plate at 8000 i can slip in there if need be but i like to stick the same media. the shapton have a few more grits i can slip in if not happy with my edge. i look froward to trying them out. they should all be hear by this weekend.
Messages In This Thread
- flattening Waterstones- shapton pro
- Another possibility presents itself......
- What a great thread this has been.....
- Re: What a great thread this has been.....
- a little bit the Indian and a little bit arrow
- which side to use?
- Quick and dirty summary:
- Atoma - $64
- Re: Quick and dirty summary:
- Re: flattening Waterstones- shapton pro
- A different perspective *LINK*
- Re: A different perspective
- Re: A different perspective
- My thoughts
- CBN and grit
- The flat wheel surface - or not..
- Re: My thoughts
- Re: My thoughts
- The flat wheel surface - or not..
- My Opinion...
- My thoughts
- Re: A different perspective
- Re: A different perspective
- lapping film?
- Re: flattening Waterstones- shapton pro
- Diamond plates......
- Flattening
- Re: flattening Waterstones- shapton pro
- Re: flattening Waterstones- shapton pro
- Re: flattening Waterstones- shapton pro
- What a great thread this has been.....
- Another possibility presents itself......