Hand Tools Archive

Subject:
Re: Correction
Response To:
Re: Correction ()

David weaver
That's pretty much it. I saw two people from Finland posted about it on the UK board one time each in the middle of the bevel up surge and prefaced their post with a statement that they were just stating that it worked and they weren't looking for a fight.

Obviously, there wasn't a lot of general acceptance, even there. When I went over there, I was met with a tradesman who flattened a bubinga table top and thanked me for beating the drum about it because it saved him a lot of time. A few members trolled that you could do it ten other ways, and he said he had tried them all and none were as good.

In 2012, I posted to Warren that he was right. Raney Nelson said only one other person ever said they used a cap iron other than Warren and something to the effect that it was esoteric.

For five years, I have asked every person who said it was well known to produce any simple example where someone other than Warren suggested to use the cap iron and gave credible instruction. Nobody has ever produced anything.

Bob strawn is the only person who said anything prior to 2012.

Messages In This Thread

Cap iron setback and shaving thickness
I knew *PIC*
Re: I recall
By the way, Mark..
Re: By the way, Mark..
Re: By the way, Mark..
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
planing
Re: planing
Re: planing
Re: planing
Re: planing
Re: planing
Consumables vs skilled labor
Re: Consumables vs skilled labor
Re: Consumables vs skilled labor
Re: Good Work
Actually, you've fed right into..
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Tried this again today
Re: Tried this again today
Re: Tried this again today
Double Iron vs. Thick Iron
Re: Double Iron vs. Thick Iron
Double Iron vs. Thick Iron
Re: Double Iron vs. Thick Iron
Re: Double Iron vs. Thick Iron
Re: Double Iron vs. Thick Iron
Re: Double Iron vs. Thick Iron
Re: Double Iron vs. Thick Iron
Re: Double Iron vs. Thick Iron
Re: Double Iron vs. Thick Iron
Re: Double Iron vs. Thick Iron
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Not really lighting it up
Correction
Re: Correction
Re: Correction *LINK*
Re: Correction
No tear stained defense needed..
Re: No tear stained defense needed..
Re: No tear stained defense needed..
Re: No tear stained defense needed..
Re: No tear stained defense needed..
Re: No tear stained defense needed..
Re: No tear stained defense needed..
Re: No tear stained defense needed..
Simple concept, easy 'splanation
Re: No tear stained defense needed..
Re: No tear stained defense needed..
Re: No tear stained defense needed..
Re: No tear stained defense needed..
Re: No tear stained defense needed..
Re: No tear stained defense needed..
Cap iron sharpening
Re: Cap iron sharpening
Re: Cap iron sharpening
Re: Cap iron sharpening
Re: Cap iron sharpening *LINK*
Re: Cap iron sharpening
Cut depth, species, and wear
Re: Worn Through
Re: Worn Through
Pictures *PIC*
Re: Pictures
Re: Pictures
Re: Pictures
Cap iron sharpness
Re: Cap iron sharpness
Re:cap iron sharpness and maintenance
Re:cap iron sharpness and maintenance
Re:cap iron sharpness and maintenance
Re: No tear stained defense needed..
swingley thread
Blackburn
Re: Blackburn
Re: Blackburn
Andrew Hunter
Japanese planes
Re: Japanese planes
Re: Japanese planes
Re: Japanese planes
Re: No tear stained defense needed..
Set-back distance and measurebation
Re: Set-back distance and measurebation
Re: No tear stained defense needed..
Re: No tear stained defense needed..
Re: No tear stained defense needed..
Re: No tear stained defense needed..
Re: No tear stained defense needed..
Re: No tear stained defense needed..
Re: Correction *LINK*
Re: Correction
Re: YMMV
Re: YMMV
Re: YMMV
Re: Correction
Re: Correction
Re: Correction
Re: The most likely
Re: The most likely
Re: The most likely
Re: The most likely
Re: The most likely
Jupiter Cakes
Re: Jupiter Cakes
Re: Correction *LINK*
Re: Correction
Re: Correction
Re: Correction
Re: Correction
Re: Correction
Re: Correction
Re: Correction
Re: Correction
This seems pointless
Re: This seems pointless
Re: This seems pointless
Re: This seems pointless
Re: This seems pointless
"Planecraft"
Re: "Planecraft"
Re: "Planecraft"
Re: "Planecraft"
Re: "Planecraft"
Re: "Planecraft"
Re: "Planecraft"
Re: "Planecraft"
The big difference
Re: "Planecraft"
Re: "Planecraft"
Re: "Planecraft"
Re: "Planecraft"
Re: "Planecraft"
Re: "Planecraft"
Re: "Planecraft"
Re: "Planecraft"
Re: "Planecraft"
My apologies
Re: Burr and Hardness
Re: Burr and Hardness
Re: Burr and Hardness
Re: "Planecraft"
Re: "Planecraft"
Re: "Planecraft"
Re: "Planecraft"
Maguire
Re: Maguire
Re: Maguire
Re: Maguire
Re: Maguire
The Virtue
Re: McGuire
Re: Correction
Re: Correction
Contrariness
Remarkable restraint
Re: Remarkable restraint
Re: Remarkable restraint
Re: Remarkable restraint
Re: Contrariness
Kato and Kawai
Re: Kato and Kawai
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Re: The other issue...
Re: The other issue...
Re: The other issue...
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Re: Radius of cambered blade - some #'s *LINK*
Re: Radius of cambered blade - some #'s
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Re: And a quote....
Re: Cap iron setback and shaving thickness
If you're a beginner...
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Re: Cap iron setback and shaving thickness
Redoing the test
Re: Redoing the test
Re: Cap iron setback and shaving thickness
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081