Hand Tools Archive

Subject:
Let he who is without sin...
Response To:
Re: BTW #2 ()

David Barnett
Larry, if you go back in your own recent posts, you'll find this response, not to Bob but to David Weaver.

http://tinyurl.com/amazingLarryWIlliams

I read it, from subject to final line as sarcastic in overall tone, and, for that matter, that final line derogates another thread contributor -- at least that's how I read it. If I'm wrong in this perception I sincerely apologize, but I really don't think I'm too far off the mark. Also consider that the way I read your response to David Weaver, and perhaps the way Bob Hackett read it -- he can speak for himself, of course -- may have fostered subsequent sarcasms, those which Bill Houghton addressed before I pointed out how they may have been provoked.

These passionate discussions should remain polite in tone, and whenever possible, be tempered with humor and wit and a good dose of tolerance. It's this latter condition that I believe Bob Hackett, I, and perhaps others may perceive as somewhat lacking.

As I've said before, I've sometimes reacted less politely than I should've, and again, for that I apologize.

Yes, we can and do have strong opinions and differing backgrounds on hand tool matters. No, we will all make mistakes from time to time, both in our views and understanding of things and in our expressing them. But we can all respect each other even while occasioning chiding or being sarcastic, as long as it's ultimately toward learning and sharing.

I would just ask that you take a look at you own behavior, attitudes, and way of expressing yourself, and see if we can't all work together to improve things. You are one highly-accomplished individual, reknowned tool historian and tool maker and have engendered much deserved respect for your contributions. No one wishes to see you or your business suffer. Just please consider your own part in the way people respond to you.

It's hard, yes, but we can all play in the same sandbox if we remember to play nice. Lets all start fresh and see if it can't work better. Fair enough?

Messages In This Thread

CPM 3V vs. CPM M4 ?
Aaaaaaaaaaahhhhhhhhhhhhh!!!!!!!!!!!!!!!!!!!!!!!!!!
Re: Aaaaaaaaaaahhhhhhhhhhhhh!!!!!!!!!!!!!!!!!!!!!!
Re: Aaaaaaaaaaahhhhhhhhhhhhh!!!!!!!!!!!!!!!!!!!!!!
Re:Length of thread
Re:Length of thread
How do you sharpen your nib,Marv? *NM*
Re: How do you sharpen your nib,Marv?
What good would a short answer do? :D *NM*
Yet another new metal (long)
Priceless
Way to go Bill !
(Message Deleted by Poster)
Re: Sticks and stones... sounds like woodworking
(Message Deleted by Poster)
Re: Bravo!
(Message Deleted by Poster)
Re: Bravo!
Christ all mighty...
Finally!
So...
Your moderator, reading this subthread... *NM* *PIC*
But Bee-wee,we wuv you...
Re: But Bee-wee,we wuv you...
"...but I know he does..."
We do what we can
Re: CPM 3V vs. CPM M4 ?
that is the problem
Re: CPM 3V vs. CPM M4 ?
Re: CPM 3V vs. CPM M4 ?
Re: CPM 3V vs. CPM M4 ?
Re: CPM 3V vs. CPM M4 ?
Re: CPM 3V vs. CPM M4 ?
Re: CPM 3V vs. CPM M4 ?
Re: CPM 3V vs. CPM M4 ?
to repeat a chisel dulling discussion
Re: to repeat a chisel dulling discussion
Re: CPM 3V vs. CPM M4 ?
I`m just happy...
Wait...
Metals
Re: Metals
must consider the whole process
Re: Metals
Re: Metals
As my dentist once said...
Bring on the Novocaine! A brief missive.
Cr-V question, then...
Re: Cr-V question, then...
realize significant gains???
View from the peanut gallery
In a nutshell (well, for me, anyway)
hardness, toughness
Re: hardness, toughness
could you explain the numbers?
You bet.
Re: You bet.
Re: You bet.
Re: You bet.
Re: You bet.
Where on earth? What on earth? Huh? Say whuh?
Since when has mass acceptance and ...
Re: Since when has mass acceptance and ...
Those are the numbers! *LINK*
Re: Those are the numbers!
I'm confused, Warren
Re: I'm confused, Warren
Re: Those are the numbers!
I'm impressed!
Re: I'm impressed!
"Sherman, set the Way Back machine for... "
Re: "Sherman, set the Way Back machine for... "
Why diamond wheels aren't used to grind steel
Re: diamond wheels - that's what I was after
Grinding Temperatures
Steve knows stuff.
Diamond wheels? Who brought up diamond wheels?
Re: Diamond wheels? Who brought up diamond wheels?
Your closing line reminds me of Dan O'Neill,
There I went again.
Re: There I went again.
Well, I was thinking about a diamond wheel. :) *NM*
Re: The diamond and HSS thing...
Re: The diamond and HSS thing...
Re: The diamond and HSS thing...
It's not so much a file protection thing as a... *LINK*
Just out of curiosity,
Re: Just out of curiosity,
Re: Just out of curiosity,
Re: "Sherman, set the Way Back machine for... "
Can you expand this thought Warren?
Good catch! *LINK*
Aim Hardness for 3V
Interesting and valuable *LINK*
3V Heat Treatment Schedule
Very helpful, Steve
Cryo
"How ya gonna keep 'em down on the farm... "
The good stuff
I like bacon. :@) *NM*
Re: I like bacon. :@)
Gotta agree Warren
Re: The good stuff
Re: The good stuff
Re: "How ya gonna keep 'em down on the farm... "
Heat treating -- the simple and not so simple
Re: Heat treating -- the simple and not so simple
Tom's right, Pam -- but wait! There's more! *LINK*
Re: Tom's right, Pam -- but wait! There's more!
Re: Tom's right, Pam -- but wait! There's more!
Re: Tom's right, Pam -- but wait! There's more!
Steps to completion
Thanks, Bob, understood. *NM*
Re: Tom's right, Pam -- but wait! There's more!
Work hardening?
Re: Work hardening?
Re: Tom's right, Pam -- but wait! There's more!
"All your base are belong to us"
Re: realize significant gains???
BTW #2
Re: BTW #2
Suggestions Larry? *NM*
Let he who is without sin...
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
A model for decision-making
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: Bring on the Novocaine! A brief missive.
Hi, Andrew! (and a couple things I left out above)
Re: Hi, Andrew! How do they make ...
Here ya go, George. *LINK*
Re:Thanks David, now I know.... *NM*
Different worlds,different approaches
Re: As my dentist once said...
Tow truck? Who needs a tow truck? *LINK*
Re: Tow truck? Who needs a tow truck?
Oh, see? I handed you a straight line back :D *NM*
Re: Metals
Re: Metals
Re: Metals
Re: Metals
Re: CPM 3V vs. CPM M4 ?
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081