Hand Tools Archive

Subject:
Re: Metals
Response To:
Metals ()

Larry Williams
Ellis,

I'm not sure what everyone else is experiencing. I do know what I experienced.

Back when I was working construction six days a week, I was in pretty good physical shape. They call it manual labor for a reason. We also did our own cabinets and other wood work. We always started with rough stock and did stock preparation by machine except that the biggest jointer we had was 8".

Sometimes we might have needed something wider, maybe 12" to 16" wide and 8' or 10' long. Those times flattening the first face was done by hand. We'd start with a fore plane and then true that face with a trying plane. Bill and I would alternate but we'd both use the same two planes. I don't remember ever having to stop and sharpen but, if we did, I'm sure it was a very welcome two minute break. We just had old water hardening steel irons or, later, O-1 irons.

Even times when I was working alone and pacing myself I stopped to rest a lot more often than I sharpened. Sharpening wouldn't have been anything other than a welcome break. The edges had more staying power and stamina than me.

These days I do a lot of metal working and even machining of wood in the shop. I maintain a lot of different high speed steel and carbide metal working tooling. I also grind custom HSS cutters for machining wood. We have some pretty good equipment to do this but it's slow and a PIA. I can't imagine putting a HSS iron in a plane, I think I'd rather take a beating than deal with that.

Messages In This Thread

CPM 3V vs. CPM M4 ?
Aaaaaaaaaaahhhhhhhhhhhhh!!!!!!!!!!!!!!!!!!!!!!!!!!
Re: Aaaaaaaaaaahhhhhhhhhhhhh!!!!!!!!!!!!!!!!!!!!!!
Re: Aaaaaaaaaaahhhhhhhhhhhhh!!!!!!!!!!!!!!!!!!!!!!
Re:Length of thread
Re:Length of thread
How do you sharpen your nib,Marv? *NM*
Re: How do you sharpen your nib,Marv?
What good would a short answer do? :D *NM*
Yet another new metal (long)
Priceless
Way to go Bill !
(Message Deleted by Poster)
Re: Sticks and stones... sounds like woodworking
(Message Deleted by Poster)
Re: Bravo!
(Message Deleted by Poster)
Re: Bravo!
Christ all mighty...
Finally!
So...
Your moderator, reading this subthread... *NM* *PIC*
But Bee-wee,we wuv you...
Re: But Bee-wee,we wuv you...
"...but I know he does..."
We do what we can
Re: CPM 3V vs. CPM M4 ?
that is the problem
Re: CPM 3V vs. CPM M4 ?
Re: CPM 3V vs. CPM M4 ?
Re: CPM 3V vs. CPM M4 ?
Re: CPM 3V vs. CPM M4 ?
Re: CPM 3V vs. CPM M4 ?
Re: CPM 3V vs. CPM M4 ?
Re: CPM 3V vs. CPM M4 ?
to repeat a chisel dulling discussion
Re: to repeat a chisel dulling discussion
Re: CPM 3V vs. CPM M4 ?
I`m just happy...
Wait...
Metals
Re: Metals
must consider the whole process
Re: Metals
Re: Metals
As my dentist once said...
Bring on the Novocaine! A brief missive.
Cr-V question, then...
Re: Cr-V question, then...
realize significant gains???
View from the peanut gallery
In a nutshell (well, for me, anyway)
hardness, toughness
Re: hardness, toughness
could you explain the numbers?
You bet.
Re: You bet.
Re: You bet.
Re: You bet.
Re: You bet.
Where on earth? What on earth? Huh? Say whuh?
Since when has mass acceptance and ...
Re: Since when has mass acceptance and ...
Those are the numbers! *LINK*
Re: Those are the numbers!
I'm confused, Warren
Re: I'm confused, Warren
Re: Those are the numbers!
I'm impressed!
Re: I'm impressed!
"Sherman, set the Way Back machine for... "
Re: "Sherman, set the Way Back machine for... "
Why diamond wheels aren't used to grind steel
Re: diamond wheels - that's what I was after
Grinding Temperatures
Steve knows stuff.
Diamond wheels? Who brought up diamond wheels?
Re: Diamond wheels? Who brought up diamond wheels?
Your closing line reminds me of Dan O'Neill,
There I went again.
Re: There I went again.
Well, I was thinking about a diamond wheel. :) *NM*
Re: The diamond and HSS thing...
Re: The diamond and HSS thing...
Re: The diamond and HSS thing...
It's not so much a file protection thing as a... *LINK*
Just out of curiosity,
Re: Just out of curiosity,
Re: Just out of curiosity,
Re: "Sherman, set the Way Back machine for... "
Can you expand this thought Warren?
Good catch! *LINK*
Aim Hardness for 3V
Interesting and valuable *LINK*
3V Heat Treatment Schedule
Very helpful, Steve
Cryo
"How ya gonna keep 'em down on the farm... "
The good stuff
I like bacon. :@) *NM*
Re: I like bacon. :@)
Gotta agree Warren
Re: The good stuff
Re: The good stuff
Re: "How ya gonna keep 'em down on the farm... "
Heat treating -- the simple and not so simple
Re: Heat treating -- the simple and not so simple
Tom's right, Pam -- but wait! There's more! *LINK*
Re: Tom's right, Pam -- but wait! There's more!
Re: Tom's right, Pam -- but wait! There's more!
Re: Tom's right, Pam -- but wait! There's more!
Steps to completion
Thanks, Bob, understood. *NM*
Re: Tom's right, Pam -- but wait! There's more!
Work hardening?
Re: Work hardening?
Re: Tom's right, Pam -- but wait! There's more!
"All your base are belong to us"
Re: realize significant gains???
BTW #2
Re: BTW #2
Suggestions Larry? *NM*
Let he who is without sin...
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
A model for decision-making
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: Bring on the Novocaine! A brief missive.
Hi, Andrew! (and a couple things I left out above)
Re: Hi, Andrew! How do they make ...
Here ya go, George. *LINK*
Re:Thanks David, now I know.... *NM*
Different worlds,different approaches
Re: As my dentist once said...
Tow truck? Who needs a tow truck? *LINK*
Re: Tow truck? Who needs a tow truck?
Oh, see? I handed you a straight line back :D *NM*
Re: Metals
Re: Metals
Re: Metals
Re: Metals
Re: CPM 3V vs. CPM M4 ?
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081