Hand Tools Archive

Subject:
Metals
Response To:
I`m just happy... ()

Ellis Walentine
Bob, I'd have to admit to using my planes and chisels without thinking of the steel involved, and I'm pretty sure the vast majority of woodworkers are in the same boat. If this should change, I'd need to know A) why I should prefer one steel over another for a given application or tool and B) where to get the ideal steel for each type of tool. Is this a big opportunity being missed by the toolmakers, or are the differences too slight to matter to the average woodworker? And, are they significant enough to matter to the discriminating woodworker? I've noticed the difference in sharpness and edge retention between O-1 and A-2 steel, and I've used various Japanese and American laminated irons and chisels, but I'm all for learning some of the subtler joys that we seem to be talking about here. What am I missing?

I'm sure I could piece most of this picture together by digging into the archives, but I'd be happy to read a succinct discussion of it anywhere.

Anyone?

Ellis

Messages In This Thread

CPM 3V vs. CPM M4 ?
Aaaaaaaaaaahhhhhhhhhhhhh!!!!!!!!!!!!!!!!!!!!!!!!!!
Re: Aaaaaaaaaaahhhhhhhhhhhhh!!!!!!!!!!!!!!!!!!!!!!
Re: Aaaaaaaaaaahhhhhhhhhhhhh!!!!!!!!!!!!!!!!!!!!!!
Re:Length of thread
Re:Length of thread
How do you sharpen your nib,Marv? *NM*
Re: How do you sharpen your nib,Marv?
What good would a short answer do? :D *NM*
Yet another new metal (long)
Priceless
Way to go Bill !
(Message Deleted by Poster)
Re: Sticks and stones... sounds like woodworking
(Message Deleted by Poster)
Re: Bravo!
(Message Deleted by Poster)
Re: Bravo!
Christ all mighty...
Finally!
So...
Your moderator, reading this subthread... *NM* *PIC*
But Bee-wee,we wuv you...
Re: But Bee-wee,we wuv you...
"...but I know he does..."
We do what we can
Re: CPM 3V vs. CPM M4 ?
that is the problem
Re: CPM 3V vs. CPM M4 ?
Re: CPM 3V vs. CPM M4 ?
Re: CPM 3V vs. CPM M4 ?
Re: CPM 3V vs. CPM M4 ?
Re: CPM 3V vs. CPM M4 ?
Re: CPM 3V vs. CPM M4 ?
Re: CPM 3V vs. CPM M4 ?
to repeat a chisel dulling discussion
Re: to repeat a chisel dulling discussion
Re: CPM 3V vs. CPM M4 ?
I`m just happy...
Wait...
Metals
Re: Metals
must consider the whole process
Re: Metals
Re: Metals
As my dentist once said...
Bring on the Novocaine! A brief missive.
Cr-V question, then...
Re: Cr-V question, then...
realize significant gains???
View from the peanut gallery
In a nutshell (well, for me, anyway)
hardness, toughness
Re: hardness, toughness
could you explain the numbers?
You bet.
Re: You bet.
Re: You bet.
Re: You bet.
Re: You bet.
Where on earth? What on earth? Huh? Say whuh?
Since when has mass acceptance and ...
Re: Since when has mass acceptance and ...
Those are the numbers! *LINK*
Re: Those are the numbers!
I'm confused, Warren
Re: I'm confused, Warren
Re: Those are the numbers!
I'm impressed!
Re: I'm impressed!
"Sherman, set the Way Back machine for... "
Re: "Sherman, set the Way Back machine for... "
Why diamond wheels aren't used to grind steel
Re: diamond wheels - that's what I was after
Grinding Temperatures
Steve knows stuff.
Diamond wheels? Who brought up diamond wheels?
Re: Diamond wheels? Who brought up diamond wheels?
Your closing line reminds me of Dan O'Neill,
There I went again.
Re: There I went again.
Well, I was thinking about a diamond wheel. :) *NM*
Re: The diamond and HSS thing...
Re: The diamond and HSS thing...
Re: The diamond and HSS thing...
It's not so much a file protection thing as a... *LINK*
Just out of curiosity,
Re: Just out of curiosity,
Re: Just out of curiosity,
Re: "Sherman, set the Way Back machine for... "
Can you expand this thought Warren?
Good catch! *LINK*
Aim Hardness for 3V
Interesting and valuable *LINK*
3V Heat Treatment Schedule
Very helpful, Steve
Cryo
"How ya gonna keep 'em down on the farm... "
The good stuff
I like bacon. :@) *NM*
Re: I like bacon. :@)
Gotta agree Warren
Re: The good stuff
Re: The good stuff
Re: "How ya gonna keep 'em down on the farm... "
Heat treating -- the simple and not so simple
Re: Heat treating -- the simple and not so simple
Tom's right, Pam -- but wait! There's more! *LINK*
Re: Tom's right, Pam -- but wait! There's more!
Re: Tom's right, Pam -- but wait! There's more!
Re: Tom's right, Pam -- but wait! There's more!
Steps to completion
Thanks, Bob, understood. *NM*
Re: Tom's right, Pam -- but wait! There's more!
Work hardening?
Re: Work hardening?
Re: Tom's right, Pam -- but wait! There's more!
"All your base are belong to us"
Re: realize significant gains???
BTW #2
Re: BTW #2
Suggestions Larry? *NM*
Let he who is without sin...
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
A model for decision-making
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: realize significant gains???
Re: Bring on the Novocaine! A brief missive.
Hi, Andrew! (and a couple things I left out above)
Re: Hi, Andrew! How do they make ...
Here ya go, George. *LINK*
Re:Thanks David, now I know.... *NM*
Different worlds,different approaches
Re: As my dentist once said...
Tow truck? Who needs a tow truck? *LINK*
Re: Tow truck? Who needs a tow truck?
Oh, see? I handed you a straight line back :D *NM*
Re: Metals
Re: Metals
Re: Metals
Re: Metals
Re: CPM 3V vs. CPM M4 ?
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081