| Topic |
 | Breast drill question | 7/7/2015, 10:05 pm |
| Hand Tool Chat - Tonight, 9:30 p.m. EDT | 7/7/2015, 7:14 pm |
| Weird break-in | 7/2/2015, 12:31 pm |
| Rust | 7/1/2015, 5:44 pm |
| Saw Vise - one solution *PIC* | 7/1/2015, 1:27 am |
| The Stanley No. 25 adjustable bevel (long) *PIC* | 6/29/2015, 3:19 pm |
| Repairing the horn on a bench plane tote - one way *PIC* | 6/29/2015, 2:01 pm |
| Getting somewhat organized *PIC* | 6/28/2015, 9:57 pm |
| supermarket hardwood | 6/25/2015, 10:28 am |
| Bridge City | 6/23/2015, 11:49 am |
| Wrapping a case with mitered molding *PIC* | 6/23/2015, 6:44 am |
| Gluing- the perils of Forum learning | 6/22/2015, 10:03 am |
| Back on Track (Lingerie Chest) | 6/21/2015, 11:15 am |
| tour of the Grovewood Gallery, Asheville, NC *PIC* | 6/21/2015, 9:53 am |
| anyone in Vancouver Canada | 6/20/2015, 8:42 pm |
| log to spoon | 6/19/2015, 7:02 pm |
| ot carpet installation | 6/19/2015, 9:47 am |
| More on Don Williams and the tool chest | 6/18/2015, 7:23 am |
| slipping veritas plough, Eureka! | 6/17/2015, 12:40 am |
| Report from SAPFM *PIC* | 6/16/2015, 9:24 pm |
| Hand Tool Chat - Tonight, 9:30 p.m. EDT | 6/16/2015, 6:31 pm |
| Question for Derek in Perth | 6/16/2015, 3:49 pm |
| One step back (with the Lingerie Chest) | 6/15/2015, 9:49 am |
| saw plate cleaning advice | 6/14/2015, 2:57 pm |
| Du Wel hand Drill 3.5 amp | 6/11/2015, 1:21 pm |
| FYI: norsewoodsmith.com hacked | 6/8/2015, 5:28 pm |
| Where is Cherubini? | 6/3/2015, 1:24 pm |
| Custom Cut Nails *PIC* | 6/3/2015, 8:20 am |
| Spice box molding *PIC* | 6/1/2015, 5:18 pm |
| Coved Frame-and-Panel | 6/1/2015, 11:37 am |
| William Duffield to speak........ | 5/31/2015, 8:52 pm |
| Moxon vise questions | 5/30/2015, 2:02 pm |
| Knife edge taper | 5/29/2015, 11:51 am |
| Great Hand Tool from Lee Valley *LINK* | 5/28/2015, 11:37 pm |
| Sawing a Tenon | 5/25/2015, 11:29 am |
| Our club needs a portable bench | 5/24/2015, 9:27 am |
| drawknife | 5/22/2015, 1:37 am |
| Is All the Seal-Coat Gone? | 5/20/2015, 10:48 am |
| Adjusting a plane. | 5/19/2015, 11:58 am |
| Chat This Evening 9:30 EDT - Topic: Corn? | 5/19/2015, 11:39 am |
| Stanley compass planes: No. 113 vs. No. 20 | 5/18/2015, 1:30 pm |
| Walt Quadrato of Brass City Tools has passed *LINK* | 5/17/2015, 5:45 pm |
| CESargents script stamp on Stanley plane | 5/14/2015, 7:11 pm |
| Carriage trade *LINK* | 5/12/2015, 3:43 am |
| Shaping the cove moulding | 5/11/2015, 12:28 pm |
| Looking for David's email | 5/6/2015, 10:16 am |
| flattening Spyderco bench stones | 5/3/2015, 4:21 pm |
| Antique Furniture | 5/3/2015, 3:09 pm |
| Do I need a smoothing plane? | 5/3/2015, 1:17 pm |
| Lingerie Chest started and your strategy wanted | 5/3/2015, 11:11 am |
| Is Hand tool only woodworking feasible? | 5/2/2015, 9:06 am |
| Anyone doing any woodworking? | 4/30/2015, 1:27 pm |
| Things that make me cynical re: wwing comm (OT) | 4/29/2015, 11:01 am |
| Open Conversation This Evening - Specialty Planes *LINK* | 4/28/2015, 12:17 pm |
| Leg Vise (Parallel Guide) Question | 4/27/2015, 10:09 am |
| Camera test *PIC* | 4/25/2015, 10:30 am |
| planes for making musical instrument bows... *PIC* | 4/24/2015, 11:17 am |
| Studley Exhibit & Handworks | 4/22/2015, 6:22 pm |
| purchasing calculation problem | 4/21/2015, 2:58 pm |
| Hand Tool Chat This Evening | 4/21/2015, 11:22 am |
| Line and Berry practice *PIC* | 4/21/2015, 10:04 am |
| Lee Valley cover plane question | 4/20/2015, 4:43 pm |
| Storing KD lumber *PIC* | 4/18/2015, 7:57 am |
| Off topic: RIP Percy Sledge | 4/15/2015, 12:28 pm |
| Sharpening a divider | 4/15/2015, 7:37 am |
| Stephen Shepherd update | 4/14/2015, 10:30 pm |
| The reward for making your own tools... | 4/14/2015, 8:52 pm |
| Hand Tool Chat - Tonight, April 14, 9:30 p.m. EDT | 4/14/2015, 6:23 pm |
| Benefit Auction Ends TONIGHT @ 9pm EDT *LINK* | 4/13/2015, 9:20 am |
| Question for David | 4/11/2015, 9:39 am |
| Natural stones(japanese) | 4/10/2015, 8:19 pm |
| help me ID a furnituremaker in Hawaii *PIC* | 4/8/2015, 6:58 pm |
| New Tools for Measuring and Layout | 4/8/2015, 10:00 am |
| Hand Tool Chat - Tonight, April 7, 9:30 p.m. EDT | 4/7/2015, 10:49 am |
| Let's have another mind-numbing steel discussion | 4/6/2015, 10:33 pm |
| Benefit Auction to end in one week *LINK* | 4/6/2015, 11:06 am |
| Grooves and rabbets in short and narrow boards | 4/5/2015, 8:49 pm |
| Cheek Floats | 4/1/2015, 5:14 pm |
| Finally! | 4/1/2015, 12:40 pm |
| Latest Lee Valley April Fool's *LINK* | 4/1/2015, 9:58 am |
| Member Galleries | 3/31/2015, 12:52 pm |
| Question on miter saw *PIC* | 3/29/2015, 4:25 pm |
| First Raised Panel | 3/28/2015, 6:13 pm |
| New Benefit Auction - Japanese Damascus knife | 3/27/2015, 1:25 pm |
| "Shaking up shaker" *PIC* | 3/27/2015, 1:08 pm |
| Hand Tool Chat Tonight 9:30 EDT *NM* | 3/24/2015, 12:23 pm |
| Help me find mallet plans | 3/23/2015, 9:01 pm |
| Jim Leamy contact info? | 3/23/2015, 11:34 am |
| Sayings You've Often Heard.. | 3/23/2015, 10:36 am |
| A problem needing a solution *PIC* | 3/22/2015, 1:34 pm |
| Off topic - traveling the world on the interweb | 3/20/2015, 12:30 pm |
| 3-D Printing | 3/18/2015, 2:57 pm |
| Hand Tool Chat - Tonight, 9:30 PM | 3/17/2015, 6:44 pm |
| Beech by the bunch *PIC* | 3/17/2015, 10:05 am |
| Question about jointer plane | 3/16/2015, 10:13 pm |
| I'm probably going to burn in hell for this.... *PIC* | 3/15/2015, 10:37 pm |
| Experience with the Latta bench *PIC* | 3/14/2015, 5:54 pm |
| Is anyone building anything? | 3/14/2015, 3:19 pm |
| PMV-11: how good do you find it to be? | 3/14/2015, 2:26 pm |
| coopered box lid | 3/11/2015, 10:12 pm |
| Artisan planing bench *LINK* | 3/10/2015, 10:36 pm |
| Hand Tool Chat - Tonight, 9:30 PM | 3/10/2015, 7:19 pm |
| Shopping tip..... *PIC* | 3/9/2015, 2:02 pm |
| Thoughts about Steel - and shaving thickness | 3/9/2015, 8:03 am |
| I'm taking a vacation | 3/6/2015, 2:43 pm |
| confession.... | 3/4/2015, 11:46 pm |
| Hand Tool Chat - Tonight, 9:30 PM | 3/3/2015, 6:34 pm |
| Steel for tools analysis | 3/2/2015, 2:35 pm |
| Latta Bench Assembled *PIC* | 3/1/2015, 5:55 pm |
| 单线刨子 (fillister) and 裁口刨子 (rabbet) | 3/1/2015, 10:32 am |
| taking the bluing off *PIC* | 2/28/2015, 11:29 am |
| If I told you I was sewing a miter joint... | 2/27/2015, 8:58 pm |
| Steve Latta auxillary bench questions | 2/27/2015, 1:18 pm |
| Are we at the peak? | 2/27/2015, 11:35 am |
| Frost meets Gore | 2/26/2015, 3:01 pm |
| Awesome work in Gallery, David *LINK* | 2/25/2015, 9:12 am |
| Hand Tool Chat - Tonight, 9:30 - Open Topic *NM* | 2/24/2015, 6:20 pm |
| Two new mortice/cutting gauges | 2/22/2015, 11:48 am |
| Traditional cap iron construction | 2/21/2015, 3:00 pm |
| Dai making chisels in Classifieds | 2/21/2015, 1:43 pm |
| Interesting Chute Plane *LINK* | 2/21/2015, 9:22 am |
| A technique for chopping to a baseline *PIC* | 2/20/2015, 8:41 pm |
| Hammer in hand now on line. *LINK* | 2/20/2015, 4:31 am |
| Wedged M&T joint Chinese style | 2/18/2015, 11:17 pm |
| Hand Tool Chat - Tonight, 9:30 - Open Topic *NM* | 2/18/2015, 2:58 pm |
| How is a draw pin(oblique pin) actually used | 2/18/2015, 8:24 am |
| Going from 55 to 45 | 2/17/2015, 9:46 pm |
| Sold my Jointer | 2/17/2015, 4:06 pm |
| Scraper Burnisher - Hardness Counts | 2/17/2015, 8:13 am |
| A global pinned joint question | 2/17/2015, 8:06 am |
| Replacement Blade for Record 020 Compass Plane | 2/17/2015, 1:41 am |
| Kiyotada | 2/17/2015, 12:03 am |
| Chinese bow/framesaw | 2/15/2015, 10:17 pm |
| Discussion topic: case innards | 2/15/2015, 4:15 pm |
| How to talk to 13 year olds | 2/15/2015, 4:00 pm |
| Deconstructing an old drawer *PIC* | 2/15/2015, 9:53 am |
| UPS Brings a Surprise *PIC* | 2/13/2015, 11:16 pm |
| shellac- after it gets applied | 2/12/2015, 9:37 am |
| Draw boring | 2/11/2015, 6:47 pm |
| Shellac Question | 2/11/2015, 9:44 am |
| Eggbeater drill question(s) | 2/11/2015, 9:17 am |
| Hand Tool Chat Tonight 9:30 | 2/10/2015, 10:32 am |
| Shooting Board | 2/9/2015, 8:50 am |
| A Call To All | 2/8/2015, 5:20 pm |
| Convex blade spokeshaves? | 2/7/2015, 4:19 pm |
| Images in wood | 2/7/2015, 2:24 pm |
| Easy plane blade back flattening *PIC* | 2/7/2015, 1:19 pm |
| Traditional M&T Joint Chinese Style *PIC* | 2/7/2015, 3:05 am |
| Guest Chat Log Posted *LINK* | 2/6/2015, 11:14 pm |
| Thank you, Wiley Horne | 2/5/2015, 7:33 pm |
| Some LN planes and nice saws 4 sale | 2/5/2015, 12:09 am |
| Copies of old Japan woodworker catalogs?... | 2/3/2015, 4:50 pm |
| Can you tell me what saw this is? | 2/3/2015, 8:10 am |
| ***GUEST CHAT TUESDAY*** *LINK* | 2/2/2015, 11:38 pm |
| Order of Operations | 2/2/2015, 4:13 pm |
| Trouble with the curve | 2/1/2015, 1:17 pm |
| OT--re Bach | 1/30/2015, 3:35 pm |
| Drawer fitting *PIC* | 1/30/2015, 11:18 am |
| cleaning a carving *PIC* | 1/30/2015, 9:31 am |
| Hand Tool Chat Tonight (Tuesday) 9:30 | 1/27/2015, 10:58 am |
| Boxwood Four-Fold Rule Repair | 1/27/2015, 9:24 am |
| Benefit Auction--Short, Ends Wednesday Evening | 1/26/2015, 3:08 pm |
| OT - Cataracts | 1/25/2015, 1:35 pm |
| cutting holes in uhmw plastic | 1/25/2015, 1:32 pm |
| Miyano heijiro saw | 1/25/2015, 5:06 am |
| OT flooring finish type recommendations? | 1/24/2015, 5:03 pm |
| Traditional Chinese Woodworking *LINK* | 1/23/2015, 12:12 am |
| Tails or pins first? Nurture or nature? | 1/22/2015, 1:31 pm |
| Making a Video Series - Making a Double Iron Plan | 1/21/2015, 10:21 am |
| Veritas Custom Planes - more than a review | 1/21/2015, 8:46 am |
| Hand Tool Chat, Tonight (TUE) 9:30 p.m. EST | 1/20/2015, 3:57 pm |
| ***SURVEY: THE IDES OF JANUARY*** | 1/19/2015, 8:08 am |
| OT, kinda: language and tools *LINK* | 1/18/2015, 7:40 pm |
| Salt during glue up? | 1/18/2015, 8:57 am |
| decided to see what I could do without electricity *PIC* | 1/17/2015, 5:33 pm |
| Some infill progress *PIC* | 1/17/2015, 4:08 pm |
| Experience with R. Lance dovetail marking holder *PIC* | 1/17/2015, 9:27 am |
| Stephen Shepherd - Update | 1/16/2015, 11:19 pm |
| The science of sharp... *LINK* | 1/16/2015, 8:06 pm |
| Quickie Bookshelf, at Bill's Request *PIC* | 1/15/2015, 9:26 pm |
| Curtis Buchanan program summary | 1/14/2015, 9:13 am |
| Japanese tool talk at CRAFTS of NJ, Feb. 1 | 1/13/2015, 8:22 pm |
| Hand Tool Chat, Tonight (TUE) 9:30 p.m. EST | 1/13/2015, 7:03 pm |
| PEC Square Accident, Tempering Steel ? | 1/13/2015, 12:50 pm |
| An evening with Curtis Buchanan-Windsor chair | 1/13/2015, 7:55 am |
| 144 base lines scribed, 352 pencil lines drawn,.. *PIC* | 1/12/2015, 5:51 pm |
| SJBTCO Infill Project | 1/12/2015, 12:18 pm |
| new work in progress | 1/12/2015, 8:36 am |
| Stephen Shepherd | 1/10/2015, 6:13 pm |
| ***Special Guest Chat: 360 WoodWorking*** *LINK* | 1/10/2015, 2:23 pm |
| Hollows and Rounds | 1/10/2015, 11:17 am |
| Resuming the Spice box jewerly boxes *PIC* | 1/8/2015, 7:45 pm |
| Mounting a chisel handle *PIC* | 1/8/2015, 7:21 pm |
| Hand Tool Chat, Tonight, 9:30 p.m. | 1/6/2015, 2:06 pm |
| Old JapanWoodworker - It looks like... | 1/6/2015, 12:26 pm |
| Benefit Auction Ending January 14 | 1/5/2015, 2:02 pm |
| Setting a hand saw | 1/2/2015, 6:43 am |
| Fox miter trimmer | 1/2/2015, 6:04 am |
| How are y'all spending the first day of 2015? | 1/1/2015, 2:59 pm |
| ***Happy New Year!*** | 12/31/2014, 12:36 pm |
| a word on smoke fitting | 12/29/2014, 10:39 pm |
| Compliments to Ellis on the Gallery feature | 12/28/2014, 1:58 pm |
| woodwork magazine | 12/28/2014, 1:56 pm |
| A "simple" Christmas project *PIC* | 12/27/2014, 11:01 am |
| Chisels done *PIC* | 12/26/2014, 10:48 pm |
| OT - Mac firewall software question | 12/26/2014, 2:13 pm |
| Whatever holiday you observe, | 12/24/2014, 5:53 pm |
| A little Christmas gift from me to you *LINK* | 12/24/2014, 2:03 pm |
| In defense of the Double Iron wooden plane.. | 12/24/2014, 1:05 pm |
| What are our goals as woodworkers? | 12/22/2014, 10:23 pm |
| Derek--handle profiles.. *PIC* | 12/22/2014, 9:58 pm |
| The chisels are calling, it's time to make sawdust *LINK* | 12/22/2014, 4:55 pm |
| Japanese sawyers | 12/22/2014, 4:09 pm |
| Season's Greetings....... *PIC* | 12/22/2014, 10:38 am |
| A Plane for an ape.. *PIC* | 12/21/2014, 9:39 pm |
| New! Organic paint stripper.... | 12/21/2014, 7:49 pm |
| Paul Sellers and the Flat Stone Question *LINK* | 12/20/2014, 10:43 pm |
| Gluing tagua to wood *PIC* | 12/20/2014, 10:29 am |
| experimental plane | 12/18/2014, 11:18 pm |
| Mujingfang plough plane | 12/18/2014, 7:07 pm |
| Tell me the difference... | 12/15/2014, 10:21 pm |
| Stick that curls right off the saw | 12/14/2014, 3:56 pm |
| Japanese woodworking video | 12/12/2014, 12:09 pm |
| Did not auger well | 12/12/2014, 1:26 am |
| An engineer makes a handscrew *PIC* | 12/10/2014, 6:01 pm |
| Stephen Shepherd *LINK* | 12/9/2014, 9:26 pm |
| Thanks, Wiley! | 12/8/2014, 10:33 pm |
| Advice on sharpening a Slick | 12/8/2014, 4:40 pm |
| questions about a Record #71 | 12/8/2014, 12:55 am |
| task lighting for detailed work | 12/6/2014, 10:06 am |
| Shapening History | 12/5/2014, 5:32 pm |
| Jointer vs. Planer | 12/3/2014, 9:50 pm |
| My current thoughts on sharpening *PIC* | 12/3/2014, 7:18 pm |
| Hand Tool Chat is on! *NM* | 12/2/2014, 9:18 pm |
| Rasp sharpening, what concentration? | 11/30/2014, 7:30 pm |
| WoodCentral Secret Santa | 11/28/2014, 1:54 pm |
| A well=preserved axe *LINK* | 11/25/2014, 2:54 pm |
| Tuesday Night Hand Tool Chat - woodcarving | 11/25/2014, 1:34 pm |
| making a strop | 11/25/2014, 12:02 pm |
| W. Butcher plough irons marked (W[crown]R | 11/24/2014, 3:22 pm |
| Progress and another whatsit *PIC* | 11/23/2014, 8:31 pm |
| Thoughts on the C. Schwartz Dovetail Ruler trick *PIC* | 11/23/2014, 3:15 pm |
| Hand wheels for Moxon Vises *LINK* | 11/21/2014, 5:11 pm |
| An unusual joint *PIC* | 11/18/2014, 7:40 pm |
| Determining value of a spice chest *PIC* | 11/18/2014, 6:34 pm |
| OT Questions for any eBay sellers here | 11/18/2014, 4:33 pm |
| Tuesday Night Hand Tool Chat | 11/18/2014, 10:20 am |
| Those dovetails from a month ago... | 11/18/2014, 9:23 am |
| Branding Iron *PIC* | 11/17/2014, 11:53 pm |
| Found tool *PIC* | 11/16/2014, 10:50 pm |
| One down . . . *PIC* | 11/16/2014, 4:36 pm |
| Early note on Atoma 400 | 11/15/2014, 4:08 pm |
| Question re OLDTOOLS | 11/14/2014, 5:40 pm |
| Silly question of the week... eggbeater drill | 11/14/2014, 12:44 pm |
| Thanks to all you Veterans out there! | 11/11/2014, 11:05 pm |
| screw terminology question | 11/11/2014, 9:32 pm |
| Tuesday Night Hand Tool Chat | 11/11/2014, 3:13 pm |
| New Benefit Auction, closes Nov. 19 | 11/11/2014, 2:00 pm |
| restoration parts | 11/8/2014, 5:55 am |
| Auger Bits | 11/7/2014, 5:24 pm |
| Follansbee Chat Log *LINK* | 11/7/2014, 3:29 pm |
| Source for shark skin abrasive?... | 11/5/2014, 12:41 pm |
| Tuesday Night Hand Tool Chat - riving | 11/4/2014, 3:34 pm |
| Sawing a perfect tenon | 11/2/2014, 11:26 am |
| Wm. Ash & Co. Cast Steel Irons | 10/31/2014, 2:51 pm |
| GUEST CHAT TONIGHT -- PETER FOLLANSBEE *LINK* *PIC* | 10/28/2014, 9:14 am |
| TiteMark vs Garage Floor *PIC* | 10/27/2014, 12:31 pm |
| Notched Batten *PIC* | 10/26/2014, 11:41 pm |
| New article posted *LINK* | 10/26/2014, 11:05 pm |
| north bros # 41 | 10/25/2014, 5:15 pm |
| John's Whelan's Books | 10/23/2014, 2:36 pm |
| Tuesday Night Hand Tool Chat - Hardware | 10/21/2014, 2:20 pm |
| Planning the lingerie chest II | 10/21/2014, 12:22 pm |
| New Benefit Auction | 10/19/2014, 10:30 am |
| A puzzling design for a square *LINK* *PIC* | 10/16/2014, 10:17 pm |
| anybody with recent experience at Klingspor show? | 10/13/2014, 11:49 am |
| NEW Shop Shot - #963 | 10/13/2014, 6:49 am |
| Dovetails - a little confused | 10/12/2014, 9:21 am |
| Ellis, how do you install side-hung runners? | 10/9/2014, 11:14 am |
| Peavey log roller is in service *PIC* | 10/9/2014, 10:01 am |
| Tuesday Night Hand Tool Chat | 10/7/2014, 5:26 pm |
| Planning the next build | 10/5/2014, 9:25 am |
| ***SPECIAL GUEST CHAT -- PETER FOLLANSBEE*** *LINK* *PIC* | 10/2/2014, 12:55 am |
| Grinder | 9/30/2014, 2:32 pm |
| Tuesday Night Hand Tool Chat | 9/30/2014, 1:10 pm |
| OT - today's language fun | 9/29/2014, 6:35 pm |
| 2d finishing nails or similarly sized brads | 9/27/2014, 10:23 pm |
| How to re-handle a peavy question *PIC* | 9/27/2014, 5:53 pm |
| Stanley 84/85 Blades | 9/27/2014, 6:06 am |
| Tuesday Night Hand Tool Chat - scrub plane | 9/23/2014, 3:14 pm |
| Ax handle question | 9/23/2014, 8:59 am |
| Built another backsaw *PICS* | 9/22/2014, 3:01 pm |
| Historical scrub plane question | 9/20/2014, 8:50 am |
| Great Grand Father's Chisels | 9/18/2014, 2:42 pm |
| From Lee Valley's latest newsletter *LINK* *PIC* | 9/18/2014, 1:11 pm |
| Saw vs Saw . . . *PIC* | 9/17/2014, 12:38 pm |
| Tonight's Chat is on *NM* | 9/16/2014, 9:25 pm |
| *** SURVEY: THE IDES OF SEPTEMBER *** *LINK* | 9/15/2014, 8:29 am |
| Back from WIA Winston-Salem | 9/14/2014, 9:58 pm |
| Finally finished a plane project *PIC* | 9/14/2014, 9:18 pm |
| WIA LV reveals new planes | 9/14/2014, 8:45 am |
| What IS Under the LV Black Shroud | 9/14/2014, 2:34 am |
| Abstract. Chipbreakers and high angles | 9/12/2014, 1:36 pm |
| Saw Rx... | 9/11/2014, 9:56 pm |
| WW'n isn't so hard and quick too. *LINK* | 9/11/2014, 4:35 pm |
| Hand Tool Chat - how sharp are your tools? | 9/9/2014, 2:20 pm |
| What's under the black LV shroud revealed *PIC* | 9/9/2014, 8:42 am |
| Hang time | 9/7/2014, 1:59 am |
| pinless leg vise (chain?) | 9/5/2014, 9:57 am |
| A short review of LV Medium Router Plane... *PIC* | 9/4/2014, 2:04 pm |
| Simon Barley's book on British saw makers | 9/3/2014, 9:19 pm |
| A Follansbee inspired Box *PIC* | 9/3/2014, 10:13 am |
| Very Clean Thru Mortise and Tenon | 9/3/2014, 8:42 am |
| Tuesday Night Hand Tool Chat | 9/2/2014, 3:38 pm |
| Trip Report to Lee Valley Tools, Ottawa | 9/1/2014, 12:09 pm |
| Unusual 2 7/16" plane blade | 8/30/2014, 5:38 pm |
| Tuesday Night Hand Tool Chat - Sharpening | 8/26/2014, 2:08 pm |
| nose or nosing auger shaping | 8/24/2014, 2:54 pm |
| Viking Chest *PIC* | 8/20/2014, 10:44 pm |
| Question for Rob Lee *LINK* | 8/19/2014, 7:19 pm |
| prepping glue joint | 8/19/2014, 5:18 pm |
| Tuesday Night Hand Tool Chat | 8/19/2014, 4:19 pm |
| What Have I Got? | 8/18/2014, 9:36 pm |
| Parang | 8/18/2014, 12:44 am |
| Saw Sharpening video. Suggestions? | 8/13/2014, 9:12 am |
| Started building my work bench | 8/12/2014, 11:38 pm |
| OT - will paper birch resprout from the stump? | 8/12/2014, 3:19 pm |
| Tuesday Night Hand Tool Chat - Handles | 8/12/2014, 11:03 am |
| That's awl, folk's | 8/10/2014, 11:45 am |
| Recommended vendor (no affiliation) | 8/9/2014, 2:28 pm |
| The semantics of risk | 8/8/2014, 12:19 pm |
| Tuesday Night Hand Tool Chat - Hide Glue | 8/5/2014, 11:46 am |
| over finished? | 8/2/2014, 11:00 am |
| Pictures of the Perth Wood Show 2014 | 8/2/2014, 10:29 am |
| OT - scissor making *LINK* | 8/1/2014, 6:37 pm |
| Stanley plane | 7/29/2014, 6:23 pm |
| Tuesday Night Hand Tool Chat - what wood & finish | 7/29/2014, 10:53 am |
| oil stones | 7/27/2014, 8:43 pm |
| The Chair is finished | 7/27/2014, 9:23 am |
| LN #1 or LN #2 | 7/23/2014, 4:58 pm |
| Tuesday Night Hand Tool Chat | 7/22/2014, 9:17 am |
| The Chair – Shaping the Arms and Back (Part 2) | 7/21/2014, 11:00 am |
| *** SURVEY: THE IDES OF JULY *** | 7/19/2014, 4:55 pm |
| Tuesday Night Hand Tool Chat | 7/15/2014, 5:02 pm |
| The Chair - Shaping the Arms and Back (Part 1) | 7/14/2014, 12:47 pm |
| I made a side bead plane *PICS* | 7/12/2014, 9:55 pm |
| vise screws on CL *LINK* | 7/12/2014, 7:16 pm |
| Speaking of Jeff Headley | 7/11/2014, 3:18 pm |
| Woodworking was supposed to be relaxing | 7/11/2014, 10:55 am |
| Tonight's Chat is on *NM* | 7/8/2014, 9:27 pm |
| Wish me luck - first dovetails! | 7/7/2014, 9:05 pm |
| The Chair - Towards the Round | 7/6/2014, 12:21 pm |
| Going Electronic? | 7/3/2014, 12:37 pm |
| Log chair build | 7/1/2014, 8:15 pm |
| FYI--Nicholson files | 7/1/2014, 3:30 pm |
| Tuesday Night Hand Tool Chat - Awls | 7/1/2014, 2:41 pm |
| Am. Woodworker is going; Woodwork's future ? | 6/30/2014, 10:32 pm |
| Electrolysis question | 6/30/2014, 7:47 pm |
| Finish ash chest *PIC* | 6/30/2014, 3:56 pm |
| What is this used for Old Tool *PIC* | 6/29/2014, 7:24 am |
| Bevel Blade versus using the lateral adjust | 6/28/2014, 8:50 pm |
| Back Bevels | 6/26/2014, 9:56 am |
| Another Japanese HT video *LINK* | 6/25/2014, 8:58 pm |
| Sharpening a Drawknife | 6/25/2014, 12:18 pm |
| Tuesday Night Hand Tool Chat - Linseed Oil 101 | 6/24/2014, 1:03 pm |
| lateral adjusting lever question | 6/18/2014, 11:45 pm |
| Flattening slab; use for wide bench *VIDEO* | 6/18/2014, 3:03 am |
| Tuesday Night Hand Tool Chat | 6/17/2014, 6:01 pm |
| Is anyone making astragal planes? | 6/14/2014, 10:45 am |
| Workbench Question | 6/13/2014, 8:55 pm |
| Panel saw vibrates | 6/11/2014, 8:58 am |
| Tuesday Night Hand Tool Chat - Bucket List | 6/10/2014, 12:30 pm |
| A shop tour.....sorta...... *PIC* | 6/9/2014, 10:04 pm |
| Outdoor furniture, 2nd guessing, 20-20 hindsight | 6/9/2014, 5:35 pm |
| Where the #5s go ... | 6/8/2014, 9:26 am |
| Advice old Columbian 9RB Monster vice | 6/7/2014, 8:59 pm |
| gouge to match 1/2" router bit | 6/6/2014, 3:53 pm |
| Coffee table serendipity *LINK* | 6/6/2014, 9:11 am |
| Tuesday Night Hand Tool Chat | 6/3/2014, 1:23 pm |
| Japanese chisel ID *PIC* | 5/31/2014, 6:42 pm |
| [AD] Last chance to save at Klingspor's May Sale! *LINK* | 5/30/2014, 2:18 pm |
| Camber on a BU smoothing plane? | 5/29/2014, 8:51 am |
| One of "those tools" . . . *PIC* | 5/28/2014, 1:44 pm |
| Tuesday Night Hand Tool Chat | 5/27/2014, 10:21 am |
| experimental plane | 5/26/2014, 3:01 pm |
| Blade to tight in OS smoother | 5/25/2014, 11:06 pm |
| Rehabing an old child's rocker | 5/25/2014, 10:17 pm |
| OT = shoe repair | 5/25/2014, 1:28 pm |
| Finish storage | 5/24/2014, 9:49 pm |
| *** SURVEY: THE IDES OF MAY *** | 5/21/2014, 7:25 am |
| epoxy | 5/20/2014, 12:46 pm |
| Tuesday Night Hand Tool Chat | 5/20/2014, 10:43 am |
| OT - philosophical question about the universe | 5/19/2014, 6:12 pm |
| Wood movement | 5/19/2014, 6:54 am |
| Problem With Coarse Diamond Stone | 5/18/2014, 9:53 pm |
| Homemade Filler For Small Cracks | 5/14/2014, 10:22 pm |
| Inspiring lamination work *LINK* | 5/14/2014, 9:28 am |
| Contact info for Stu at TFJ | 5/13/2014, 4:04 pm |
| OT - how long are laserjet cartridges good? | 5/12/2014, 11:54 pm |
| Post your picture here .... | 5/12/2014, 12:50 pm |
| OT - RIP Farley Mowat *LINK* | 5/7/2014, 4:34 pm |
| Depth Micrometer | 5/4/2014, 11:36 pm |
| Liberty Tool is for sale *LINK* | 5/4/2014, 5:20 am |
| What screws should I use to affix | 5/3/2014, 1:00 pm |
| Millers Falls tote rod | 5/2/2014, 6:40 pm |
| Chisel follow-up - The Kell honing guide | 5/2/2014, 1:45 pm |
| Chisel follow-up - The Kell honing guide | 5/2/2014, 1:33 pm |
| Old tools in Laguna Beach | 5/1/2014, 11:44 pm |
| Chat Room Problems | 4/29/2014, 10:46 am |
| OT- nonwoodworking things to do in the Northwest | 4/25/2014, 5:24 pm |
| Tuesday Night Hand Tool Chat - Whimsy *PIC* | 4/22/2014, 11:16 am |
| Do accessory shoes for Record 405 fit Stanley 45s? | 4/20/2014, 1:01 pm |
| Sliding Dovetails with the Veritas Small Plow | 4/20/2014, 9:17 am |
| OT What so see in OK & MO? | 4/19/2014, 2:09 pm |
| Tuesday Night Hand Tool Chat - Dilemma | 4/15/2014, 1:31 pm |
| A Handtool Video...... | 4/15/2014, 11:41 am |
| Dutch Tool Chest | 4/15/2014, 8:47 am |
| Making a sash window video *LINK* | 4/14/2014, 7:10 pm |
| [AD] Peter Korn Lecture and Book Signing *LINK* | 4/14/2014, 6:00 pm |
| From your home town, Derek? | 4/12/2014, 5:46 pm |
| OT - electric fence | 4/11/2014, 12:22 pm |
| Sanded vs. unsanded grout--OT | 4/10/2014, 1:06 pm |
| L-N Corner Chisels | 4/9/2014, 6:23 pm |
| Tuesday Night Hand Tool Chat - Black | 4/8/2014, 2:37 pm |
| Why try squares? | 4/8/2014, 4:32 am |
| Question about the price for moulding planes set | 4/7/2014, 2:05 pm |
| Question for Derek - Chisels | 4/4/2014, 11:54 am |
| Tuesday Night Hand Tool Chat - Power Tools | 4/1/2014, 10:38 am |
| New from Lee Valley! *LINK* *PIC* | 4/1/2014, 10:18 am |
| Hand made router plane | 3/31/2014, 11:14 am |
| Lie-Nielsen Support | 3/28/2014, 6:21 pm |
| What is it? *PIC* | 3/28/2014, 5:50 pm |
| ***SAW DICTIONARY is Now on Sale*** *LINK* | 3/27/2014, 10:47 am |
| ***SURVEY: THE IDES OF MARCH*** *LINK* | 3/27/2014, 8:22 am |
| Tuesday Night Hand Tool Chat - Spring | 3/25/2014, 4:51 pm |
| Will It Blend? *LINK* | 3/20/2014, 8:47 pm |
| Bowl making with Rip Mann *LINK* *PIC* | 3/18/2014, 11:18 pm |
| Brace and Bit Recommendation | 3/18/2014, 6:22 pm |
| Plug for a buddy *LINK* *PIC* | 3/18/2014, 6:08 pm |
| Tuesday Night Hand Tool Chat | 3/18/2014, 3:53 pm |
| PEC Double Square Review | 3/17/2014, 7:38 pm |
| Third spoon and thanks *PIC* | 3/17/2014, 4:03 pm |
| Centre of Effort - Part II | 3/16/2014, 5:45 am |
| Woodwrights shop sampler | 3/11/2014, 7:40 pm |
| Tuesday Night Hand Tool Chat | 3/11/2014, 3:42 pm |
| Bench in a weekend | 3/10/2014, 12:37 pm |
| Firmer vs. Carving gouges query... | 3/9/2014, 9:08 pm |
| Usefulness of Stanley Type 6 bench plane | 3/7/2014, 11:10 pm |
| a few spokeshave questions | 3/7/2014, 11:05 am |
| Tuesday Night Hand Tool Chat | 3/4/2014, 1:46 pm |
| Wm. Marples Spokeshave Question *PIC* | 3/3/2014, 7:20 pm |
| Observations and question on Butcher tools... | 3/3/2014, 11:07 am |
| What water stone is this? | 3/2/2014, 10:25 pm |
| first spoon and a related gouge question | 3/2/2014, 10:46 am |
| Comparing anti tearout methods *LINK* | 3/2/2014, 7:44 am |
| #7 vs #8 jointer plane | 3/1/2014, 4:21 pm |
| Windsor headboards *PIC* | 2/27/2014, 8:29 pm |
| Off topic - flashing question on house | 2/25/2014, 3:22 pm |
| Tuesday Night Hand Tool Chat - Distractions | 2/25/2014, 10:43 am |
| The Chair - The fingers (pt 2) | 2/24/2014, 11:24 am |
| PATINA | 2/24/2014, 7:02 am |
| Hand tool work of a different sort...... *PIC* | 2/19/2014, 2:53 pm |
| Shinto rasp info wanted | 2/19/2014, 9:15 am |
| Narra for a spokeshave body? | 2/19/2014, 7:37 am |
| Tuesday Night Hand Tool Chat | 2/18/2014, 4:22 pm |
| The Chair - The fingers (pt 1) | 2/17/2014, 11:01 am |
| Buying a new rip panel saw | 2/16/2014, 9:09 am |
| Got some cash to blow... | 2/15/2014, 1:14 pm |
| Question for the plane experts | 2/13/2014, 9:38 pm |
| A shop stool.....the seat *PIC* | 2/11/2014, 7:42 pm |
| Tuesday Night Hand Tool Chat - Proper Disposal | 2/11/2014, 1:04 pm |
| Compass plane question | 2/10/2014, 6:16 pm |
| A mitre box for a Dozuki Z..... *PIC* | 2/9/2014, 7:28 pm |
| stuff made with hand tools | 2/9/2014, 10:18 am |
| a good haul for oldtool hell... and a request for | 2/8/2014, 7:09 pm |
| repair a hand plane | 2/8/2014, 1:26 pm |
| Can this be repaired? *PIC* | 2/8/2014, 5:59 am |
| LN hand tool event in Minneapolis *LINK* | 2/7/2014, 11:07 pm |
| Featherwood Frames Handmade Eyeglasses *PIC* | 2/5/2014, 1:14 pm |
| Tuesday Night Hand Tool Chat - Static Electricity | 2/4/2014, 11:40 am |
| Whatzit cabinet... | 2/2/2014, 2:19 pm |
| The Chair - close but no coconut | 2/2/2014, 10:44 am |
| saw sharpenning | 1/31/2014, 10:41 am |
| THE Shop Stool.....the base..... *PIC* | 1/30/2014, 1:38 pm |
| The Chair - a thought | 1/29/2014, 8:32 pm |
| The Chair – The arm-backrest joint (part 2) | 1/29/2014, 8:12 am |
| Rules for figure and warp? | 1/28/2014, 4:46 pm |
| Tuesday Night Hand Tool Chat - State of the Union | 1/28/2014, 12:15 pm |
| Marking Walnut, Wenge, Cocobolo, etc. | 1/27/2014, 11:12 am |
| The Chair - Arm/Backrest Joint (pt 1) | 1/27/2014, 10:46 am |
| Plane parts | 1/26/2014, 2:20 pm |
| The Chair - Arms and Backrest begun. | 1/25/2014, 11:35 am |
| Timber Getting in Western Australia (video) | 1/24/2014, 12:42 pm |
| The Chair - End of Phase One | 1/23/2014, 11:37 am |
| hand tool tote | 1/22/2014, 7:42 pm |
| Tuesday Night Hand Tool Chat | 1/21/2014, 2:27 pm |
| Happy Birthday, Dad *PIC* | 1/19/2014, 7:38 pm |
| The Chair - Slotting the Stretchers (Pt 2) | 1/19/2014, 12:30 pm |
| ***SURVEY: THE IDES OF JANUARY*** *LINK* | 1/18/2014, 1:30 pm |
| The Chair - how would you ... | 1/17/2014, 10:31 am |
| Cleveland Ohio is the best | 1/16/2014, 7:25 pm |
| Whoops.... *PIC* | 1/15/2014, 8:00 pm |
| Ash Box... | 1/15/2014, 1:45 pm |
| Michael dresdner Chat Transcript *LINK* | 1/15/2014, 6:50 am |
| Tuesday Night Hand Tool Chat - Nails | 1/14/2014, 10:50 am |
| More on The Chair build .. | 1/13/2014, 11:59 am |
| Starrett 14D Narrow Blade? | 1/13/2014, 10:55 am |
| R.I.P. Fred West *PIC* | 1/12/2014, 3:04 pm |
| This seems like the right forum for this technique *NM* *LINK* | 1/12/2014, 7:47 am |
| Cup or twist first? | 1/11/2014, 9:11 pm |
| On glues. | 1/10/2014, 9:25 am |
| Fitting the Front and Rear Stretchers (Pt 1) | 1/9/2014, 12:35 pm |
| ***Guest Chat TONIGHT-- Michael Dresdner*** *LINK* | 1/9/2014, 8:28 am |
| The Chair - Coping the tenon shoulders | 1/8/2014, 10:42 am |
| Difficult Tenon Shoulders Made Easy | 1/8/2014, 7:57 am |
| Stanley (or LN) 750 handles | 1/7/2014, 1:02 pm |
| Tuesday Night Hand Tool Chat - Winter projects | 1/7/2014, 8:18 am |
| Why loose tools in a tool box? Why even a tool box | 1/7/2014, 12:09 am |
| RoboScraper *LINK* *PIC* | 1/5/2014, 11:13 pm |
| O/T Pentagon waived sanctions rules | 1/5/2014, 12:24 pm |
| The Chair - Tenons | 1/5/2014, 11:48 am |
| ***Special Guest Chat -- Michael Dresdner*** *LINK* *PIC* | 1/4/2014, 5:13 pm |
| RIP, Phil Everly *LINK* | 1/4/2014, 12:32 pm |
| The Chair - Stretchers | 1/3/2014, 1:14 pm |
| Wooden tool rest *PIC* | 1/3/2014, 12:05 pm |
| OT - CFL equivalents | 1/2/2014, 7:21 pm |
| Greenlee chisel | 1/2/2014, 3:16 pm |
| Old Wine In New Bottles | 1/1/2014, 11:49 am |
| Happy New Year, All! | 12/31/2013, 8:29 pm |
| LV mini router | 12/31/2013, 5:13 pm |
| A simple tool making project..... *PIC* | 12/31/2013, 12:54 pm |
| Building Wegner's "The Chair" - a start | 12/31/2013, 12:11 pm |
| Hand plane help | 12/30/2013, 7:40 pm |
| Mortises: Paring Before Chopping | 12/30/2013, 6:21 pm |
| Has anyone tried these blades? *LINK* *PIC* | 12/30/2013, 10:04 am |
| Hand/Bench Chisels | 12/28/2013, 2:29 pm |
| Plumb bob shelf *PIC* | 12/28/2013, 6:49 am |
| Nicholson milled tooth files | 12/27/2013, 9:07 am |
| Lee Valley Chipbreaker | 12/26/2013, 12:11 pm |
| Lee Valley Cast Round Spokeshave | 12/26/2013, 10:36 am |
| Modifying the LV Small Router Plane | 12/26/2013, 5:57 am |
| Winding sticks and bad eyes | 12/26/2013, 1:03 am |
| for me, making furniture is like pooping after sur | 12/25/2013, 11:00 pm |
| What I Made for Christmas This Year *LINK* | 12/25/2013, 6:31 pm |
| Yankee 2100 score *PIC* | 12/25/2013, 9:47 am |
| 'Twas the night... | 12/24/2013, 10:30 pm |
| If you celebrate Christmas, | 12/24/2013, 4:35 pm |
| Age of an E A Berg Chisel | 12/24/2013, 11:00 am |
| Need advice rehabbing a spokeshave *LINK* | 12/24/2013, 7:58 am |
| The Knew Concepts Birdcage Fretsaw: critical look | 12/24/2013, 3:32 am |
| life span of a saw file | 12/23/2013, 10:09 am |
| Making small knurled-head screws (long) *LINK* *PIC* | 12/20/2013, 5:35 pm |
| Holiday greetings *PIC* | 12/20/2013, 2:04 pm |
| Hand Tools Extreme | 12/20/2013, 9:15 am |
| Berbice chair design | 12/19/2013, 7:10 pm |
| Something different--Rocker/settee *PIC* | 12/17/2013, 2:10 pm |
| New toothed plane blades problems? | 12/16/2013, 11:42 pm |
| Lee Valley customer service | 12/16/2013, 9:47 am |
| OT - Rest in Peace, Peter O'Toole *LINK* *PIC* | 12/15/2013, 3:28 pm |
| rasp handle removal? | 12/15/2013, 3:21 pm |
| Veritas Crosscut and rip tenon saws *PIC* | 12/14/2013, 10:07 pm |
| missing screw *PIC* | 12/14/2013, 11:46 am |
| "Made in China" bias? | 12/13/2013, 2:05 pm |
| Request for info..... | 12/12/2013, 9:30 pm |
| Drawer back detail | 12/12/2013, 2:25 pm |
| Waterstone Maintenance?? | 12/11/2013, 7:06 pm |
| New saws, great price *LINK* | 12/11/2013, 8:18 am |
| Lee Valley magnetic base work light | 12/10/2013, 6:03 pm |
| HandTool : Hand Controlled Tool? *PIC* | 12/10/2013, 1:33 pm |
| ***GUEST CHAT TONIGHT :: MEGAN FITZPATRICK*** *LINK* | 12/10/2013, 9:46 am |
| To soak or not to soak | 12/9/2013, 10:57 pm |
| Ichihiro comparable chisel | 12/9/2013, 9:26 am |
| stanley miter box | 12/8/2013, 7:24 pm |
| Christmas gifts *PIC* | 12/8/2013, 1:43 pm |
| Simple question on Harder waterstones | 12/7/2013, 12:20 am |
| One way to dispose of sawdust | 12/6/2013, 3:26 pm |
| Nelson Mandela is gone | 12/5/2013, 10:52 pm |
| A first for Vancouver! | 12/5/2013, 9:16 pm |
| Custom Tasai Chisels | 12/5/2013, 5:26 pm |
| ***Special Guest Chat -- Megan Fitzpatrick*** *LINK* | 12/3/2013, 9:16 am |
| Repairing my Record quick release vise | 12/2/2013, 8:25 am |
| Video Downloads *LINK* | 11/30/2013, 11:09 am |
| Happy Thanksgiving, folks! | 11/28/2013, 8:22 am |
| Making Traditional Wooden Planes e-book | 11/26/2013, 3:29 pm |
| Hand Tool Chat Tonight, Topic Suggestions? | 11/26/2013, 2:19 pm |
| toothed stamp / froster / matting tool | 11/25/2013, 6:00 pm |
| Old wooden spokeshave rehab? | 11/25/2013, 4:11 pm |
| circular moulding | 11/24/2013, 5:36 pm |
| More "Inventors" Who Just Don't Get It | 11/24/2013, 1:11 pm |
| Wood-bodied Plane Restoration | 11/24/2013, 7:32 am |
| A video Shop Tour | 11/23/2013, 10:56 pm |
| Frank Klausz molding *PIC* | 11/23/2013, 4:09 pm |
| Many thanks to the collective knowledge here *PIC* | 11/22/2013, 10:50 pm |
| 50 years ago..... | 11/22/2013, 1:30 pm |
| Books Edited by Bernard E. Jones | 11/21/2013, 3:03 pm |
| What'd I find? | 11/20/2013, 2:57 pm |
| Bradbury | 11/19/2013, 2:00 pm |
| Topic suggestions for the Hand Tool Chat? *NM* | 11/19/2013, 1:11 pm |
| ***SURVEY: THE IDES OF NOVEMBER*** | 11/18/2013, 10:59 am |
| Off topic: size of carpet pat relative to carpet | 11/17/2013, 12:51 pm |
| Word of warning - The Art of Joinery 2nd edition | 11/15/2013, 4:31 pm |
| TGIAG web page? | 11/14/2013, 9:39 am |
| Box joints | 11/12/2013, 5:18 pm |
| Tuesday Night Hand Tool Chat - filling grain | 11/12/2013, 10:57 am |
| Another chair video....a bit different | 11/11/2013, 9:25 pm |
| Derek, The Chair *LINK* | 11/11/2013, 5:42 pm |
| They Have a New Home *PIC* | 11/11/2013, 4:55 pm |
| Hello its been a few years! | 11/10/2013, 2:57 pm |
| A mallet for morticing | 11/10/2013, 8:55 am |
| just a pic of some chisels *NM* *PIC* | 11/9/2013, 3:14 am |
| new saw vice *PIC* | 11/7/2013, 2:55 pm |
| Panel gauge..... *PIC* | 11/7/2013, 12:48 pm |
| convert transitional jack to panel raising plane? *PIC* | 11/6/2013, 6:55 pm |
| Tuesday Night Hand Tool Chat - working in winter | 11/5/2013, 11:19 am |
| Marking mortices (Part II) | 11/3/2013, 9:22 am |
| Marking mortices (Part I) | 11/3/2013, 8:45 am |
| Congrats Derek! | 11/2/2013, 5:02 pm |
| Termites - Richard Jones | 11/2/2013, 4:20 am |
| Single iron fore plane *PIC* | 11/1/2013, 2:08 pm |
| Music stand...mostly hand tools *PIC* | 10/30/2013, 10:23 pm |
| Snipe hinge update *LINK* | 10/30/2013, 7:48 am |
| Tuesday Night Hand Tool Chat - new v old | 10/29/2013, 11:14 am |
| roy's saw stand *PIC* | 10/26/2013, 12:46 pm |
| Fourfold Rule Restoration | 10/26/2013, 12:02 pm |
| Yankee drill bits | 10/24/2013, 8:13 am |
| Yankee screwdrivers - Anyone uses them? | 10/24/2013, 1:45 am |
| Is anyone else having a problem... | 10/22/2013, 12:04 pm |
| Sharpening nailsets | 10/21/2013, 3:20 pm |
| #3 | 10/19/2013, 9:29 pm |
| Thanks to WoodCentral and its members | 10/18/2013, 3:46 pm |
| So I went to the apple orchard... | 10/18/2013, 2:40 pm |
| Off topic: cuttin carpet pad | 10/16/2013, 9:13 pm |
| Deep thoughts | 10/16/2013, 11:45 am |
| Utility Knives | 10/16/2013, 11:11 am |
| [AD] Klingspor's 13th Annual Extravaganza! *LINK* | 10/16/2013, 8:28 am |
| nicker for moving fillister *PIC* | 10/15/2013, 9:39 pm |
| Tool shops near SF | 10/15/2013, 7:19 am |
| The journey of a new project. *LINK* | 10/13/2013, 12:38 pm |
| Patent search *PIC* | 10/13/2013, 12:19 pm |
| Paintable, gap-filling exterior adhesive | 10/13/2013, 1:57 am |
| index finger on closed tote | 10/12/2013, 7:57 pm |
| I hope you can fix stupid! | 10/11/2013, 5:29 pm |
| Compass planes | 10/11/2013, 4:37 pm |
| Serious eye candy | 10/11/2013, 9:36 am |
| Texas Furniture, a book review *LINK* | 10/11/2013, 12:41 am |
| Stringing Federal-style legs | 10/8/2013, 3:28 pm |
| A Cabinetmaker's Toolchest.... | 10/8/2013, 1:25 pm |
| Tuesday Night Hand Tool Chat - $ | 10/8/2013, 12:43 pm |
| NEED HELP IDENTIFYING THIS PLANE | 10/8/2013, 4:54 am |
| Sigh | 10/7/2013, 3:54 pm |
| Plate 11 benches | 10/6/2013, 2:10 pm |
| Subtleties of shaving deflection | 10/5/2013, 3:59 am |
| Fishtail chisels | 10/4/2013, 9:56 am |
| OT;what is this FLV thing? | 10/4/2013, 4:02 am |
| A little consumerism | 10/3/2013, 5:42 pm |
| Cleared the decks for WIA | 10/3/2013, 1:31 pm |
| 18th c. turner's shop *LINK* *PIC* | 10/3/2013, 9:29 am |
| Starrett 14D double square--Useful? | 10/2/2013, 2:19 pm |
| Climate differences affecting drawer fit | 10/1/2013, 11:57 pm |
| Measured success with circular plane | 10/1/2013, 7:14 pm |
| Table top | 10/1/2013, 4:43 pm |
| Laminating Strips | 9/30/2013, 5:58 pm |
| About shooting planes and their blades | 9/30/2013, 11:13 am |
| Cutting Dovetails | 9/29/2013, 11:27 pm |
| Snipe hinges | 9/28/2013, 8:44 pm |
| Rabbet plane recommendation *PIC* | 9/27/2013, 11:45 pm |
| Footnote on Starrett blade interchangeability | 9/27/2013, 10:26 pm |
| [AD] Klingspor's 13th Annual Extravaganza! *LINK* | 9/27/2013, 10:29 am |
| Dividers *LINK* | 9/27/2013, 7:46 am |
| Does this sound right: clean-up | 9/26/2013, 3:40 pm |
| Why hide glue? | 9/25/2013, 8:02 am |
| On making mallets. *LINK* | 9/24/2013, 10:31 pm |
| A big Thank you to Wiley Horne. *LINK* | 9/24/2013, 10:29 pm |
| ***SURVEY: THE IDES OF SEPTEMBER*** | 9/24/2013, 3:54 pm |
| Anybody going to the WIA Show in Cincy? *LINK* | 9/24/2013, 10:23 am |
| Mike Donaldson, check yr email *NM* | 9/23/2013, 3:48 pm |
| Hot Hide Glue question(s) | 9/23/2013, 1:57 pm |
| hand plane storage *PIC* | 9/21/2013, 9:22 pm |
| Gramercy Holdfasts...a kit? *PIC* | 9/21/2013, 6:21 pm |
| Help Identify Tree *PIC* | 9/21/2013, 8:18 am |
| Auction reminder | 9/21/2013, 7:57 am |
| How do you start a mortise? | 9/19/2013, 3:56 pm |
| LV shooting plane | 9/17/2013, 9:23 pm |
| #20 circular plane | 9/16/2013, 6:46 pm |
| "By hand and eye" a question.... | 9/16/2013, 12:21 am |
| Giving a Japanese tool talk at Maker Faire NY | 9/15/2013, 8:41 pm |
| mortise issues | 9/15/2013, 8:20 pm |
| a place for technology | 9/14/2013, 5:20 pm |
| On starting a rebate.... | 9/14/2013, 2:00 pm |
| Recent project *PIC* | 9/13/2013, 3:27 pm |
| Woodworking in the 18th Century Registration Open | 9/13/2013, 3:06 pm |
| Back Polishing Problem | 9/12/2013, 11:52 pm |
| Yankee tools box dates | 9/12/2013, 7:56 pm |
| Nice day for ploughing | 9/12/2013, 4:20 pm |
| DuWel Circular Saw | 9/11/2013, 11:29 pm |
| My journey to a new workshop *LINK* | 9/11/2013, 10:49 pm |
| Tuesday Night Hand Tool Chat | 9/10/2013, 3:53 pm |
| cleaning square scale/rule | 9/10/2013, 10:43 am |
| OT - moisture content in wood floor | 9/9/2013, 7:29 pm |
| Sharpening router plane blades | 9/9/2013, 9:20 am |
| NEW Shop Shot - #962 | 9/9/2013, 5:25 am |
| 6" double square, satin | 9/8/2013, 11:56 pm |
| Benefit Auction | 9/8/2013, 8:05 am |
| Pulled the trigger on the LV Shooter... | 9/7/2013, 11:33 am |
| Fun *LINK* | 9/7/2013, 11:12 am |
| Thin plate back saws | 9/6/2013, 4:12 pm |
| Chinese St. Roy? *LINK* | 9/6/2013, 2:48 pm |
| Wood banding on granite | 9/6/2013, 11:20 am |
| Finally did something about it *PIC* | 9/3/2013, 8:12 pm |
| Help with Plane ID *PIC* | 9/3/2013, 9:53 am |
| Tuesday Night Hand Tool Chat - Tool & Book Reviews | 9/3/2013, 9:22 am |
| vise chops angle | 9/2/2013, 4:52 pm |
| Outfit me for saw sharpening | 9/1/2013, 1:50 pm |
| Speaking of Shooting Boards | 8/30/2013, 9:58 pm |
| A secondary review of the LV shooter.... | 8/30/2013, 11:49 am |
| tool reviews | 8/29/2013, 1:42 pm |
| There will be a Hand Tool Chat in 3,2,1 *NM* | 8/27/2013, 9:30 pm |
| Hans Wegner "The Chair" | 8/27/2013, 11:26 am |
| The Veritas Shooting Plane - Reviewed | 8/26/2013, 7:47 pm |
| card scraper sharpening again | 8/25/2013, 5:28 pm |
| crib ideas | 8/25/2013, 9:36 am |
| Small router plane...... *PIC* | 8/24/2013, 1:31 pm |
| Favorite hammer for mortising | 8/24/2013, 1:29 pm |
| Stamps for marking wood | 8/24/2013, 11:33 am |
| Why panel saws? | 8/22/2013, 7:12 pm |
| cedar bench plans? | 8/21/2013, 2:26 am |
| Tuesday Night Hand Tool Chat - Bench Planes | 8/20/2013, 10:55 am |
| weekend *PIC* | 8/19/2013, 8:26 am |
| Scrub plane question? | 8/18/2013, 2:25 pm |
| OT. Login error errasure | 8/18/2013, 9:33 am |
| Trying plane refit | 8/17/2013, 11:08 am |
| Used Panel Saw Sources | 8/17/2013, 10:42 am |
| Adding to the chip breaker-single iron debate ... | 8/13/2013, 2:21 am |
| OT - question for fisherfolk | 8/12/2013, 8:35 pm |
| Walnut for Moxon? | 8/12/2013, 3:07 pm |
| Brade & Co chisel | 8/11/2013, 11:29 pm |
| How was this done? | 8/11/2013, 5:25 pm |
| Committing hand tool/ww heresy..... *PIC* | 8/10/2013, 11:41 am |
| Equipping my self to saw sharpen | 8/9/2013, 5:34 pm |
| Sinister Plot to Slaughter Electrons Uncovered | 8/9/2013, 12:30 pm |
| Pack of Dogs | 8/8/2013, 12:38 pm |
| Bench Slave or Deadman.... *PIC* | 8/8/2013, 11:36 am |
| Tuesday Night Hand Tool Chat | 8/6/2013, 12:27 pm |
| "Improved" Version of LN Workbench | 8/6/2013, 10:16 am |
| Steampunk Mitrebox | 8/5/2013, 10:04 am |
| On Grinding - Dry Vs. Wet | 8/4/2013, 9:07 pm |
| dovetail box question | 8/4/2013, 12:01 am |
| William and Mary Bible box, as a proof of concept | 8/3/2013, 6:19 pm |
| Newbie chisel sharpening reminder | 8/1/2013, 1:40 pm |
| Fore planes | 7/31/2013, 3:03 pm |
| Duh!....note for LV twin-screw vise owners | 7/30/2013, 3:50 pm |
| Tuesday Night Hand Tool Chat - Stain vs Dye | 7/30/2013, 11:03 am |
| ***SURVEY: THE IDES OF JULY*** *LINK* | 7/29/2013, 11:10 am |
| Disston D-8 rehab *LINK* | 7/28/2013, 11:17 pm |
| Vegas, new stuff | 7/27/2013, 10:46 pm |
| Downsides of Diamond Plates? | 7/27/2013, 1:42 pm |
| Off topic - zucchini | 7/26/2013, 11:33 pm |
| Will Bald Cypress damage iron, like Cedar? | 7/26/2013, 3:09 pm |
| NEW Shop Shot - #961 | 7/26/2013, 3:26 am |
| A friendly reminder - the cap iron article | 7/24/2013, 9:41 pm |
| Inlay Question | 7/24/2013, 10:05 am |
| Plinths (if that is what they are called) | 7/23/2013, 6:43 pm |
| Rough first impressions LN #5 versus LV #4 1/2 | 7/23/2013, 1:50 pm |
| Check it out, Roubo fans *NM* *LINK* | 7/22/2013, 5:12 pm |
| The Kist is complete. | 7/22/2013, 10:02 am |
| Seeking instrument recomendations..... | 7/21/2013, 11:38 am |
| Free ebook: The Tool Collection of Gene Landon. | 7/20/2013, 12:44 pm |
| Beginning prototyping | 7/19/2013, 2:53 pm |
| High humidity and the woodshop..... *PIC* | 7/18/2013, 10:44 am |
| Roubo bouvet, 10th tool *PIC* | 7/17/2013, 7:48 am |
| Tuesday Night Hand Tool Chat | 7/16/2013, 11:13 am |
| For Barry.. (Cross posted) | 7/15/2013, 8:50 am |
| first time saw filing...... | 7/10/2013, 5:23 pm |
| July, "what are you working on"? *PIC* | 7/10/2013, 4:56 pm |
| "Cousin Fred’s Wonderful Woodworking Shop" | 7/10/2013, 3:01 pm |
| What do you use to mark walnut? *NM* | 7/10/2013, 8:11 am |
| Tuesday Night Hand Tool Chat - AD/KD | 7/9/2013, 9:13 am |
| Veritas Twin Screw Vise Instructions | 7/9/2013, 8:02 am |
| Chisel Monogamy | 7/7/2013, 9:47 pm |
| Air Dry v Kiln Dry | 6/29/2013, 11:30 am |
| Carpel tunnel problem fixed! | 6/28/2013, 1:15 pm |
