1 2 3 4 5 6

Hand Tools Archive

Where to buy/sell vintage tools?12/5/2018, 9:07 pm
Stanley #55 Chest12/1/2018, 3:43 pm
Blotching Light Colors11/30/2018, 5:51 pm
Copywriting at its best *LINK*11/22/2018, 3:12 pm
Evenfall Studios needs help11/18/2018, 6:01 pm
Bird cage windsor *PIC*11/15/2018, 10:15 pm
Wood Central Secret Santa11/10/2018, 1:31 am
Need an intervention 11/7/2018, 7:31 pm
Hand Tool Chat Tonight 9:30 Eastern STANDARD Time *NM*11/6/2018, 2:19 pm
OT - Changing the clocks11/4/2018, 11:07 am
Another coffee table11/4/2018, 4:37 am
Hand Tools *PIC*10/29/2018, 2:50 pm
...Sergeant Pepper taught the band to play...10/23/2018, 7:26 am
Oul for the outside of a hand plane?10/19/2018, 11:15 pm
CJWA Online Tool Auction begins tonight... *LINK*10/12/2018, 6:56 pm
Q's about traditional awl forms.10/12/2018, 1:00 pm
Introduction *PIC*10/10/2018, 8:00 am
Hello again world10/9/2018, 1:38 am
Washita stone aquisitions & questions... *PIC*10/1/2018, 8:27 pm
Backyard Amber Varnish9/30/2018, 12:09 am
Furniture Record Blog9/29/2018, 3:08 pm
Repair came out very nice *PIC*9/21/2018, 9:00 am
Hand Tool Chat Tonight 9/18 9:30 p.m. E.D.T. *NM*9/18/2018, 3:15 pm
Thoughts on the LV Shooting Board System 9/12/2018, 10:50 pm
Need help identifying a hammer *PIC*9/9/2018, 2:45 pm
Coffee table9/9/2018, 12:33 pm
Neat yard sale find *PIC*9/8/2018, 12:31 pm
Coloring wood *PIC*9/3/2018, 3:09 pm
Wow, check out this layout I managed to do! *PIC*9/3/2018, 2:33 pm
Fridge liquid hide glue to extend life9/1/2018, 3:21 pm
Hard Maple *PIC*8/30/2018, 8:27 pm
Two rasps I like a lot *PIC*8/29/2018, 9:00 pm
NEW Shop Shot - #9698/28/2018, 10:47 pm
What is this?8/26/2018, 3:04 pm
Return to woodworking: Luthery *PIC*8/25/2018, 5:15 pm
shoulder plane cleaning8/24/2018, 7:29 pm
Lee Valley spokeshave *PIC*8/24/2018, 10:40 am
Varnish Telecaster 8/12/2018, 9:41 am
One Hand Trains the Brain to Control the Other8/7/2018, 9:00 pm
The West Australian Woodshow 20188/6/2018, 2:31 am
First batch of varnish *PIC*8/4/2018, 5:44 pm
Knew Concepts fret saw8/4/2018, 10:29 am
Apothecary Chest - final8/1/2018, 11:40 am
Apothecary Chest - new knobs7/30/2018, 1:06 pm
Apothecary chest - shiplapping the back7/25/2018, 10:44 am
Where to find "real" varnish7/25/2018, 10:19 am
Wall Thingy7/23/2018, 4:52 pm
Apothecary chest - the drawers are done!7/22/2018, 10:48 am
Record rabbet/rebate plane depth stops7/17/2018, 4:34 pm
Lee Valley Shooting Board Track?7/17/2018, 9:55 am
Using Spyderco stones7/17/2018, 12:40 am
Apothecary chest - through dovetails on a drawer7/16/2018, 12:27 pm
Apothecary chest - shaping the drawer fronts (2)7/14/2018, 12:20 pm
Spoke shave jammings7/12/2018, 9:37 am
Froe7/9/2018, 8:01 pm
Apothecary Chest - shaping the drawer fronts (1)7/9/2018, 11:50 am
Hand Planing Redwood7/6/2018, 7:58 pm
Update on the Apothecary Chest7/2/2018, 11:55 am
The #140 trick is dead ...7/1/2018, 10:45 am
Aluminum bar clamps *PIC*6/28/2018, 7:01 pm
Aluminum bar clamps6/25/2018, 8:43 am
New Woodworking book out *PIC*6/20/2018, 10:50 am
Apothecary chest - beginning the drawers6/19/2018, 11:18 am
Dovetailing on an angle6/13/2018, 9:39 am
Paean to the double square6/8/2018, 5:07 pm
Frame saws6/7/2018, 10:03 am
Wille Sundqvist - RIP6/3/2018, 10:25 pm
[AD] Amazing Auction Coming Up June 16 in IL! *LINK*6/3/2018, 7:25 pm
Apothecary chest - part eight6/3/2018, 1:14 pm
Apothecary chest - part seven5/28/2018, 12:52 pm
French polishing help5/27/2018, 12:24 pm
lengthwise bookmatching5/23/2018, 9:28 am
[AD] Amazing Auction Coming Up June 16 in IL!5/23/2018, 8:10 am
Apothecary chest - part six5/21/2018, 11:46 am
The reason I was looking for a spokeshave *PIC*5/15/2018, 11:20 pm
Apothecary chest - part five5/14/2018, 11:32 am
Apothecary chest - part four5/7/2018, 10:37 am
Apothecary chest - part three4/30/2018, 11:25 am
Apothecary chest - part two4/26/2018, 11:50 am
Apothecary chest - part one4/24/2018, 6:32 am
Dovetails4/23/2018, 2:24 pm
Drawing up and marking out *LINK*4/17/2018, 6:07 am
A little CzeckEdge splurge...... *PIC*4/16/2018, 3:04 pm
Pair of New Bow Making Planes... *LINK* *PIC*4/15/2018, 8:52 pm
Double iron spokeshave *PIC*4/14/2018, 5:56 pm
[AD] Lee Valley FREE SHIPPING Ends 4/174/13/2018, 11:05 am
Any spokeshaves that work with one hand?4/10/2018, 4:47 pm
Pegging tenons4/8/2018, 8:56 am
Zenith Jointer Refurbishment *PIC*4/4/2018, 3:27 pm
Lee Valley: a little filler topic4/1/2018, 2:11 pm
Groovin' Baby! 3/31/2018, 6:58 am
round bottom spokeshave recommendation, please3/21/2018, 9:05 am
Planing perfect dados3/20/2018, 9:06 am
Shaker sewing cabinet *PIC*3/19/2018, 9:45 pm
Adze details attn: Derek Cohen *LINK*3/17/2018, 9:51 pm
Porcelain floor tile3/16/2018, 9:34 pm
Claire Minihan travisher *PIC*3/13/2018, 3:35 pm
Surprising Local Furniture3/6/2018, 2:31 pm
Stanley plane tuning3/6/2018, 10:55 am
Skew Infill Shooting Plane - Finished - Almost3/4/2018, 12:14 am
a hard groove to plough2/28/2018, 1:33 pm
Brian's Guide to Japanese Chisels2/26/2018, 9:08 am
Adze handle *PIC*2/25/2018, 4:46 pm
Coping saw handles2/24/2018, 12:04 pm
Adjustable Sticking Board2/24/2018, 10:54 am
A carver's mallet...... *PIC*2/21/2018, 4:30 pm
Saw nuts2/19/2018, 8:44 pm
Hand Tool Chat Tonight Tue 2/13/18 9:30 EST2/13/2018, 10:54 am
MWTCA in Medina2/10/2018, 3:39 pm
red oak flooring repurpose ideas2/10/2018, 10:41 am
***Possible outage tonight***2/9/2018, 5:19 pm
Celebrating Stephen2/8/2018, 12:29 pm
Craftsman Plane2/7/2018, 4:36 pm
Pull Saw Stand *LINK*2/6/2018, 1:27 pm
Revilo High Speed Steel Iron *PIC*1/31/2018, 11:07 am
Cesar Chelor plane1/31/2018, 10:30 am
Counter Stool prototype completed1/28/2018, 8:51 am
Tell me where I'm wrong..(skew shooting infill)1/26/2018, 9:09 am
Passing of Stephen Shepherd1/26/2018, 1:48 am
drawer stop1/23/2018, 8:23 pm
Prototypes for the stools1/23/2018, 11:22 am
Henry's Chair - Prototyping a Dining Chair1/16/2018, 12:57 pm
You Missed Another One1/16/2018, 11:20 am
Hide Glue??1/13/2018, 2:42 pm
Three-leg bar stool1/13/2018, 12:43 pm
Fox Wedge tenon??1/12/2018, 9:15 pm
Mortise gauge question1/12/2018, 5:32 am
NWA Showcase 2018 *LINK*1/10/2018, 10:26 am
Who can straighten a D-7?1/6/2018, 12:43 am
Query regarding historical use of waterstones...1/2/2018, 11:02 pm
Diamond sharpening plates1/1/2018, 10:32 pm
Smashed knife 21/1/2018, 5:01 pm
Debonding Atoma plates12/31/2017, 5:59 pm
Smashed Knives - what for the handle?12/31/2017, 9:49 am
A lands question for Rob Lee.....12/30/2017, 10:30 am
Bamboo for workbench top?12/29/2017, 10:40 pm
(OT) Kamikoto 7-inch Chef’s Knife *PIC*12/29/2017, 12:44 pm
Hi all12/27/2017, 12:35 pm
Made an oven rack puller *PIC*12/27/2017, 10:20 am
First Smashed Marking Knife12/27/2017, 8:52 am
Vice advice 12/26/2017, 8:51 pm
Question about an oil stone12/24/2017, 11:32 am
Usefulness of certain clamp types *PIC*12/22/2017, 6:16 pm
Sharpening Japanese Handsaws12/22/2017, 11:52 am
Dan's Translucent Ark Deal12/20/2017, 7:13 pm
working angles for pine, popular?12/18/2017, 10:24 am
Wire wheel question12/18/2017, 8:32 am
Cap iron leading-edge profiling12/17/2017, 10:23 pm
Poor form12/17/2017, 11:37 am
Three down ..12/17/2017, 11:23 am
An interesting look again at Beach's results12/15/2017, 5:19 pm
Pictures of Various Honing Options12/13/2017, 5:27 pm
Dovetail - why does this happen? *PIC*12/13/2017, 8:44 am
Tormek+ CBN wheel12/12/2017, 9:49 pm
Router Plane Blade??12/12/2017, 4:01 pm
Voids in steel12/12/2017, 12:11 pm
New timber tech book on the way.12/11/2017, 2:42 pm
Help Identify a Japanese Chisel *PIC*12/9/2017, 9:21 pm
One down ...12/9/2017, 8:39 am
Kitchen Series12/7/2017, 10:13 am
Windsor mortice and tenon12/7/2017, 7:08 am
The trouble with too many tools...12/6/2017, 8:35 am
A milestone for me...12/5/2017, 3:27 pm
Lovely little hammer12/4/2017, 8:56 pm
when to Camber during sharpening? 12/4/2017, 9:04 am
flattening Waterstones- shapton pro11/27/2017, 9:55 am
About designing and making11/27/2017, 6:26 am
Stanley Sweetheart chisel purchase.11/20/2017, 6:09 pm
Fundraiser for Ru Amagasu11/20/2017, 9:29 am
Planed vs. Sanded11/19/2017, 9:53 pm
Old Man Schwarz Shaking His Cane *LINK*11/19/2017, 6:40 pm
Planing Plywood11/19/2017, 8:05 am
premium chisel vs narex 11/18/2017, 2:46 pm
Use of walnut for bench top?...11/17/2017, 2:08 pm
Tell me about the adze11/17/2017, 10:44 am
Drawer pull *PIC*11/15/2017, 7:27 am
Planecraft and the Cap Iron11/11/2017, 7:29 am
Sutyagin house *PIC*11/10/2017, 8:37 pm
Thanks, Wiley11/10/2017, 3:29 pm
Elite Craftsmen - Any Directory?11/10/2017, 11:00 am
Planes; knife geometry specifications *LINK*11/10/2017, 10:09 am
Replacement cap irons or chipbreakers!!!11/9/2017, 1:40 pm
LV replacement cap irons......11/8/2017, 1:44 pm
Actual Projects *PIC*11/8/2017, 9:46 am
Knew Concepts Saw ?11/6/2017, 9:34 am
More .. (shudder) .. on the chipbreaker :O 11/6/2017, 1:21 am
More "old vs. new"11/5/2017, 7:11 pm
through mortise, drawboring advide *PIC*11/5/2017, 8:39 am
Stanley Butt Gauge No. 9511/3/2017, 1:47 pm
Urushi in the Twin Cities *LINK*11/3/2017, 1:23 pm
Wooden vs. pipe bar clamps11/2/2017, 5:48 pm
Wiley - Knife Updates?11/2/2017, 12:58 pm
Benefit Auction Posted11/1/2017, 1:05 pm
Shoji-Noir10/31/2017, 11:39 pm
Lee Marshall10/31/2017, 11:47 am
Cut depth and cap-iron set redux10/31/2017, 2:29 am
What is this attachment for my Brace called?10/29/2017, 6:46 pm
Sharpening Serrated Knives..OT10/29/2017, 2:18 pm
ID this small plane *PIC*10/29/2017, 6:43 am
A testament to the quality of atoma stones10/28/2017, 9:48 am
Shiplap with bead question *PIC*10/26/2017, 8:57 am
More Pictures - Modern Vs. Vintage10/25/2017, 6:48 pm
Who Else Bought "Wiley's Knife?"10/25/2017, 9:35 am
***WoodCentral's Birthday***10/23/2017, 6:30 am
Gluing up drawers10/23/2017, 4:49 am
Cap iron setback and shaving thickness10/20/2017, 2:04 am
Super article by Steve Voigt in PW...10/18/2017, 8:30 pm
New tools..10/18/2017, 9:36 am
Old Steel vs. New Steel10/18/2017, 9:29 am
Float Question10/17/2017, 7:55 pm
Miller's falls no. 4...borrrring tool10/16/2017, 7:38 pm
General Woodworking Chat Tonight 9:30 p.m. EDT *NM*10/16/2017, 5:31 pm
Lie Nielsen or Veritas Dovetail saw?10/15/2017, 12:10 pm
Warren - Rabbet Plane Question10/15/2017, 9:00 am
The Hand Tool Mentality Spread Outside of WW-ing?10/15/2017, 8:56 am
Odd Old Hammer...What is it ? *PIC*10/12/2017, 5:53 pm
Antique handtools *PIC*10/9/2017, 5:58 pm
Dumb question 10/3/2017, 3:03 pm
OT - Las Vegas concert shooting and blood donation10/3/2017, 12:14 pm
Woodworking Chat Tonight Monday 9:30 p.m. E.D.T. *NM*10/2/2017, 5:38 pm
Getting off track10/2/2017, 5:25 pm
***NEW SPONSOR :: HARVEY TOOLS*** *LINK*10/2/2017, 9:38 am
Searching WoodCentral9/27/2017, 10:48 am
Roubo Hollows & Rounds9/27/2017, 10:09 am
First Pictures off the Scope9/26/2017, 11:33 pm
Whelan planemaking book?9/26/2017, 10:40 pm
OT--Job planning tip of the day9/26/2017, 11:59 am
OT - home maintenance tip of the day9/25/2017, 8:30 pm
Chat Tonight, Tuesday 9:30 p.m. EDT9/19/2017, 8:08 pm
We will be going 100% sharpening perv...9/18/2017, 8:45 am
Router plane for tenons, nothing new9/16/2017, 4:26 pm
Paul Sellers dovetail video.......9/15/2017, 4:17 am
Knew Concepts saw *PIC*9/13/2017, 3:26 pm
Jefferson, Hamilton, Washington Laptops *LINK*9/7/2017, 11:30 am
waxing a dovetail saw9/6/2017, 12:31 pm
Rough to flat process9/4/2017, 6:37 pm
Veneer question 9/4/2017, 1:29 pm
Clever use of a breast drill *PIC*9/1/2017, 8:08 pm
Hand Tool Chat Tonight, Tuesday 9:30 p.m. EDT *NM*8/29/2017, 3:11 pm
Bill Carter on YouTube8/23/2017, 7:36 am
Hollowing plane8/22/2017, 7:39 pm
Stool sample *PIC*8/18/2017, 12:23 pm
Wood joints *LINK*8/17/2017, 8:06 pm
Millenials and craftsmanship8/17/2017, 11:36 am
Vise question *NM*8/15/2017, 6:06 pm
[AD] Handwork Magazine, a Brief Review *LINK* *PIC*8/13/2017, 1:00 pm
Draw Knife Handles8/10/2017, 9:54 am
Hide glue: What consistency is best?8/8/2017, 8:38 pm
West Australian Woodshow 20178/7/2017, 10:45 am
Drawknife questions---cross post 8/6/2017, 12:49 pm
Regluing Titebond and Liquid Hide joints - Deleted8/6/2017, 11:27 am
OT: end of an era, domestic accessories version *PIC*8/3/2017, 11:33 pm
Let's Plane8/3/2017, 10:29 am
(Message Deleted by Poster)8/2/2017, 9:19 pm
Interesting article on joints8/1/2017, 3:56 pm
What wood was that?8/1/2017, 9:45 am
Dovetailing drawer dividers...Ooops. *PIC*7/26/2017, 7:27 am
Hand Tool Chat Tonight Tuesday 9:30 P.M. EDT7/25/2017, 5:48 pm
Chisel apprentising *PIC*7/24/2017, 5:53 pm
Favorite part of case construction *PIC*7/24/2017, 5:34 pm
Anyone else go to AWFS 2017?7/22/2017, 10:29 am
Stanley 45 cam rest post and screw7/21/2017, 4:28 pm
Danish modern bed joinery *PIC*7/21/2017, 1:03 pm
German Chipbreaker Video *LINK*7/19/2017, 10:02 pm
A couple M&T questions *PIC*7/18/2017, 4:15 pm
spear point router plane blades7/16/2017, 7:26 am
Laundry Room Tokonoma7/14/2017, 7:25 pm
Rule for Drawer Pulls?7/14/2017, 1:42 pm
side table mockup *PIC*7/13/2017, 1:10 am
Home Depot - And the Demise of Local7/8/2017, 4:22 pm
Sofa Table VI – all the way to completion7/8/2017, 2:14 pm
Hand Cranked Grinder Questions7/8/2017, 1:58 pm
The Correct Tool7/8/2017, 12:06 am
hand plane info.7/5/2017, 2:32 am
What is this tool? *PIC*7/1/2017, 12:42 pm
HANDWORK Magazine6/30/2017, 12:11 am
high end chisel recomendations? 6/29/2017, 12:01 pm
Tea House Garden Bench Completed6/27/2017, 10:42 am
Sofa Table - part V: A Hidden Drawer6/26/2017, 12:09 pm
Frame and panel groove. tools and technique? 6/26/2017, 10:42 am
Scraper Planes6/21/2017, 7:47 am
tips for deep mortises? *PIC*6/19/2017, 1:27 pm
The bevel lies in the details: Sofa Table IV6/19/2017, 10:20 am
how to store files,rasps,floats.6/19/2017, 9:36 am
Wood and steel wear *LINK*6/18/2017, 10:42 am
I get around (marking gauge) *PIC*6/17/2017, 5:38 pm
3/4 dado plane depth6/15/2017, 2:51 pm
Game Changers.....6/15/2017, 11:13 am
Facebook Woodworking Group6/14/2017, 9:47 am
cambered carbide scraper6/13/2017, 4:31 pm
The Roubo planes6/13/2017, 3:39 pm
Sofa Table - part III6/11/2017, 12:13 pm
Small saw *PIC*6/10/2017, 5:52 pm
No 6 Norris copy in process6/10/2017, 4:23 pm
Help speeding up my sharpening routine6/10/2017, 10:15 am
Small steps still are progress6/9/2017, 9:06 am
Less Than Two Hours Away!6/6/2017, 7:40 pm
Sofa Table - part II6/5/2017, 12:02 pm
Display Case done and installed *PIC*6/3/2017, 6:59 pm
hybrid saw tooth patterns6/2/2017, 10:37 am
Need phone help (OT)6/1/2017, 11:29 pm
Teeth rake angles on rip saws.....6/1/2017, 7:21 pm
People for the Ethical Treatment of Trees5/31/2017, 6:04 pm
Disston Panel Saw5/30/2017, 4:53 pm
Hand Tool Chat Tonight, Tuesday 9:30 p.m. EDT *NM*5/30/2017, 3:14 pm
Krenov Catch Installation *PIC*5/29/2017, 3:08 pm
Sofa Table: aprons5/29/2017, 9:58 am
Garage Sale find *PIC*5/29/2017, 8:42 am
Ultimate NOS tools! *PIC*5/26/2017, 11:24 am
Sofa Table - take two5/21/2017, 9:23 am
Piercing long boards5/21/2017, 6:59 am
Sofa Table: a beginning5/20/2017, 11:50 am
Live edge shelf and wall bracket.5/20/2017, 9:13 am
Server updates5/17/2017, 5:34 pm
For blended woodworkers.....5/17/2017, 1:27 pm
I see some forgeries coming soon..5/17/2017, 9:43 am
What makes the "handtool" look?5/16/2017, 3:20 pm
Important Hand Tool Chat Tonight 9:30 EDT5/16/2017, 3:18 pm
Suggestions for hanging saws.....5/16/2017, 11:49 am
Super Shear Files arrived today5/15/2017, 4:47 pm
The kitchen is finished!5/15/2017, 11:40 am
OT - Happy Mother's Day5/14/2017, 1:35 pm
Hand Tool Aids5/14/2017, 8:44 am
Nagura Substitute 5/12/2017, 12:50 pm
planing long thin strips-how to hold?5/11/2017, 11:30 am
Employment for the shooting board *PIC*5/11/2017, 11:25 am
Power to hand tool transition5/10/2017, 7:43 am
An Australian Furniture Maker *LINK*5/4/2017, 9:49 pm
General File question5/4/2017, 8:43 am
Files for sharpening saws5/3/2017, 3:53 pm
File and rasp recommendation *PIC*5/3/2017, 8:12 am
Mortising video *LINK*5/1/2017, 3:47 am
Files, rasps, floats, rifflers, etc4/28/2017, 9:09 am
Badger and panelraiser4/27/2017, 5:11 am
What is a "Start"4/26/2017, 1:41 pm
Water stone for PM-V114/26/2017, 8:58 am
Insert hand plane and mini plane LV4/26/2017, 5:13 am
Cleaning a burnisher4/25/2017, 4:33 pm
Evaluation of Narex Chisel from Lee Valley4/21/2017, 3:18 pm
Norris Vs. Stanley4/20/2017, 11:26 am
display cabinet received its "wiped off" finish *PIC*4/20/2017, 9:46 am
Sargent plane4/19/2017, 4:15 pm
Ko-ganna restoration4/19/2017, 11:14 am
Brace and old bits - Worth the trouble?4/19/2017, 1:49 am
Shopping note on a slow day4/18/2017, 5:20 pm
Hand Tool Discussion Tonight, Tues., 9:30 p.m. EDT *LINK*4/18/2017, 11:24 am
For all who have built a kitchen 4/17/2017, 11:50 am
Setting the cap iron4/17/2017, 7:28 am
A Nifty Shooting Plane4/16/2017, 10:37 am
What was this writing surface? *PIC*4/14/2017, 9:20 pm
is this working?4/13/2017, 1:35 pm
test - havent posted in several years *NM*4/13/2017, 1:33 pm
Planing MDF4/13/2017, 9:01 am
Criteria for deciding when to sharpen4/12/2017, 5:10 pm
Hand Tool Chat Tonight 9:30 p.m. EDT4/11/2017, 2:06 pm
Lowest honing angle PM-V11?4/9/2017, 4:32 pm
mahogany4/8/2017, 5:19 pm
Spoke Shave Blade Installation4/7/2017, 9:15 am
Hinge installation *PIC*4/6/2017, 7:19 pm
Ura-Dashi (tapping out) Musings4/5/2017, 10:45 am
Knight's foundry *PIC*4/4/2017, 1:16 am
Need slipperiest oil4/3/2017, 6:18 pm
Chagrined 4/3/2017, 4:34 pm
Did I miss something?4/1/2017, 2:14 pm
Veritas4/1/2017, 10:28 am
Registering a skew rabbet plane3/31/2017, 6:43 am
Cleaning Old Stone *PIC*3/30/2017, 9:09 pm
Acquired job lot of joiners tools.....3/30/2017, 2:39 pm
Gouges.....in- or out-cannel??.....3/30/2017, 1:55 pm
Is Your Bucket Half Full or Half Empty?3/28/2017, 8:20 am
OT: light bulb heat3/27/2017, 10:04 am
Display cabient-time to install hinges *PIC*3/26/2017, 3:59 pm
Hand Tool Porn Video3/26/2017, 2:10 pm
Rust Removal3/25/2017, 9:21 pm
Edge dogs.....3/25/2017, 6:46 pm
Wooden planes, historic prices3/23/2017, 6:38 pm
(Message Deleted by Poster)3/22/2017, 9:40 pm
Hand Tool Bucket List Discussion3/21/2017, 1:57 pm
Combo squares other than Starrett? 3/21/2017, 1:34 pm
*** SURVEY: THE IDES OF MARCH ***3/19/2017, 10:53 am
(Message Deleted by Poster)3/18/2017, 12:13 am
Tucker Vise3/17/2017, 3:32 am
Dragon rasps3/15/2017, 5:20 pm
Fun with firewood3/14/2017, 6:13 pm
Chisel question on 'Messages'3/12/2017, 10:49 pm
(Message Deleted by Poster)3/12/2017, 8:04 pm
(Message Deleted by Poster)3/11/2017, 11:17 pm
Questions about Titemark blades3/11/2017, 7:52 pm
Tea House Table and Chair - Complete3/10/2017, 11:13 am
(Message Deleted by Poster)3/8/2017, 2:12 am
Homemade travisher *PIC*3/6/2017, 6:18 pm
what skew with you? or cross grain rabbits hell3/3/2017, 11:06 am
Tea House Table - Stretcher to Post3/2/2017, 7:57 am
Selling English Molding planes3/1/2017, 6:19 pm
A Treatise of Japanning and Varnishing (1688)2/28/2017, 8:01 am
scraper burnisher *LINK*2/24/2017, 10:49 am
no leg/front vice? no problem *PIC*2/22/2017, 8:39 pm
has anyone made a Raamtang?2/22/2017, 6:52 pm
Tea House Table2/22/2017, 12:27 pm
Frankenmooxon *PIC*2/22/2017, 12:00 pm
Hand Tool Chat Tonight Tuesday 9:30 pm EST *NM*2/21/2017, 1:24 pm
dovetails,Rabbits and dado's oh my!2/20/2017, 2:11 pm
Duplicate To Windsor Chair Post *PIC*2/16/2017, 10:21 pm
Drawer runner replacement options?2/16/2017, 10:42 am
Tea House Chair - Back and Arm Rests2/16/2017, 9:57 am
I'm doing about 100 in reverse today,2/14/2017, 8:53 pm
Knight plane2/13/2017, 9:41 pm
Narex or PM-V11 mortise chisels2/13/2017, 5:23 pm
Some information on lamated blades2/12/2017, 8:01 pm
Shop in box2/10/2017, 11:32 am
One tail or two? *PIC*2/9/2017, 8:48 pm
Tea House Chair - Posts and Spindles2/9/2017, 11:18 am
Hide glue question(s)2/7/2017, 9:05 am
I got to meet Mr. Norris at the show *PIC*2/5/2017, 3:53 pm
How It's Made -Particle Steels2/5/2017, 1:34 pm
Definition of a tool auctioneer2/5/2017, 11:14 am
sharpening bevels and wear rate2/3/2017, 6:04 pm
OT: Backyard wildlife - the world at war *PIC*2/3/2017, 4:24 pm
Do you agree this is walnut?2/3/2017, 4:05 pm
More old finishing fun *LINK*2/2/2017, 8:24 am
Tea House Table and Chair2/1/2017, 12:08 pm
Weird saw blades - ID??? *PIC*2/1/2017, 11:35 am
Hand Tool Chat, Tonight, Tuesday, 9:30 p.m. E.S.T.1/31/2017, 3:55 pm
Spend my money 1/31/2017, 3:06 pm
Any of you hand tool guys ever make your own glue?1/30/2017, 6:18 pm
Learning Woodowrking from the Internet1/29/2017, 10:24 am
The technique could use some work, but ... *LINK*1/29/2017, 10:03 am
Cap Irons1/27/2017, 8:35 pm
stanley 113 compass plane blades1/27/2017, 5:46 pm
test 1/27/2017, 3:16 pm
Something other than sharpening1/26/2017, 9:35 am
A bit of varnish furnace fun *PIC*1/24/2017, 5:46 pm
Have you found chromium oxide gives the best edge?1/23/2017, 3:28 pm
Hand finishing water-based poly.1/22/2017, 9:06 am
Transitional Disston?1/21/2017, 4:21 pm
*** Gallery Update *** *LINK*1/19/2017, 1:31 pm
Wall Mounted Console - Wire Passthrough1/18/2017, 8:55 am
quick dovetail Chinese style1/17/2017, 10:14 pm
What happens to worn diamonds1/17/2017, 8:27 pm
I used a story stick *PIC*1/17/2017, 5:42 pm
Hand Tool Chat, This Evening, 9:30 p.m. E.S.T. *NM*1/17/2017, 11:27 am
Rapid flatening of waterstone *PIC*1/16/2017, 9:04 pm
What saw dovetailing Baltic birch1/15/2017, 7:40 pm
Story stick tips and tricks1/14/2017, 7:31 pm
sharpening1/14/2017, 11:28 am
Do you push or pound waste removal1/13/2017, 9:22 am
Wall-Mounted Media Console - Door Building1/11/2017, 9:24 am
Sargent transitional1/10/2017, 7:32 pm
Stanley Book1/10/2017, 11:45 am
Paging Derek et al: Lee Valley planning...1/9/2017, 5:58 pm
Wooden Jack Grain Orientation 1/8/2017, 1:39 am
Dangerous Question1/6/2017, 8:27 pm
how is the Lie-Nielsen tool events?1/6/2017, 1:05 pm
Shaving Horse *PIC*1/5/2017, 8:33 pm
Ruler Trick with Spokeshave Blade1/4/2017, 2:17 pm
Wall-Mounted Media Console1/4/2017, 9:08 am
Hand Tool Chat Tonight Tuesday 9:30 p.m. EST1/3/2017, 4:28 pm
Cleaning antique finishes1/3/2017, 9:20 am
Leg vise accessories1/2/2017, 11:12 am
***HAPPY NEW YEAR!***1/1/2017, 3:02 am
Spokeshave : Veritas vs. Boggs12/31/2016, 5:21 pm
OT Warm steam vaporizer *LINK*12/30/2016, 9:49 pm
Ergonomics of coffin smoother12/29/2016, 6:41 pm
sharpening knickers12/29/2016, 4:15 pm
Saw Vice Advice Needed!12/26/2016, 1:48 pm
Nakashima-Widdicomb Restoration Part II12/22/2016, 11:27 am
Hand Tool Chat Tonight Tuesday 9:30 p.m. EST12/20/2016, 3:09 pm
Sharpton Stone question12/19/2016, 9:27 am
Very old b&d drill info needed12/17/2016, 9:53 am
File Maintenance Idea12/15/2016, 12:37 pm
Nakashima-Widdicomb Restoration12/15/2016, 9:03 am
Hand Tool Chat Tonight 9:30 p.m. EST *NM*12/13/2016, 1:53 pm
Wood moulding plane12/12/2016, 7:10 pm
OT - wood post fence fixing12/12/2016, 4:40 pm
Choosing a Hand Plane12/12/2016, 2:10 pm
How many woodworkers cook?12/7/2016, 10:22 am
Live Edge Tsuridana - Complete12/7/2016, 9:32 am
Sharpening pain11/23/2016, 5:27 pm
1 2 3 4 5 6
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.