Messages Archive

Subject:
Re: more clarification
Response To:
more clarification ()

Barry Irby
It seems, if the snipe is on the trailing end that the board must jump up when it comes out from under the infeed roller. Thus, the pressure of the out feed roller may be too light to hold the board down to the platen. Now to investigate to see if there is any adjustment in the roller pressure.

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081