Messages Archive

Front or rear?

Dustmaker (Mike)
Is this the Ford Fusion? You can go to Autozone or any parts house and get a bearing puller for free to use.

When you did the brakes did you check for play and or grinding while the calipers where off?

Grab the top and bottom of each wheel and push at the top and pull at the bottom You should not get an end play. Rotate the wheel and listen for grinding or binding. This will be the bearing that needs replacing.

The biggest part is the wrench socket to remove the center nut. The rears are easier then the fronts. Some of the fronts are complete hub assemblies (which I like better) and you will need a puller.

Also get more hand cleaner because you will get greasy again.

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.