Messages Archive

Subject:
Not only slab, but "filled" slab...

JL
One door had a poplar core. Let it suffice to say, it wasn't very light. It was a pain getting it down to the lower level to cut it.

The other door was worse. It had a particle board core. It was heavier.

Both doors cut well with the circular saw doing a plunge cut. I used a clamp guide. I then cut into the corners with the jig saw.

© 1998 - 2014 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081