LED W/Pics -- Ron in Drums PA -- Sunday, 6 April 2008, at 6:09 p.m.
8 messages -- Newest posted Monday, 7 April 2008, at 12:46 p.m.
Steven K., Steve A., and Texian... -- Allen Neighbors -- Sunday, 6 April 2008, at 7:17 p.m.
10 messages -- Newest posted Tuesday, 8 April 2008, at 9:58 a.m.
Re: New Toy... -- Allen Neighbors -- Sunday, 6 April 2008, at 7:22 p.m.
1 message
Used roughing gouge -- Wayne Carson "TX" -- Monday, 7 April 2008, at 10:18 a.m.
5 messages -- Newest posted Tuesday, 8 April 2008, at 10:08 a.m.
Re: I love my DirecTV -- Glenn Hodges/Nashville, Ga -- Monday, 7 April 2008, at 11:19 a.m.
1 message
Re: I ordered my Thombles today -- Rick Davenport -- Monday, 7 April 2008, at 4:22 p.m.
2 messages -- Newest posted Tuesday, 8 April 2008, at 5:27 a.m.
A little round...a little flat *PIC* -- Carole Valentine -- Tuesday, 8 April 2008, at 1:13 a.m.
14 messages -- Newest posted Wednesday, 9 April 2008, at 2:52 p.m.
Re: I love my DirecTV -- Carole Valentine -- Tuesday, 8 April 2008, at 1:21 a.m.
2 messages -- Newest posted Tuesday, 8 April 2008, at 8:00 a.m.
Human Form Multi-Axis Turning -- bowlman -- Tuesday, 8 April 2008, at 6:25 a.m.
3 messages -- Newest posted Tuesday, 8 April 2008, at 11:39 a.m.
Looking for finishing "jig" -- Larry In Lima -- Tuesday, 8 April 2008, at 5:19 p.m.
14 messages -- Newest posted Wednesday, 9 April 2008, at 10:59 a.m.
Need a room at Richmond? -- Charlie Anderson -- Tuesday, 8 April 2008, at 8:32 p.m.
3 messages -- Newest posted Wednesday, 9 April 2008, at 4:01 p.m.
Determining moisture content -- Alan Tolchinsky -- Tuesday, 8 April 2008, at 11:21 p.m.
7 messages -- Newest posted Wednesday, 9 April 2008, at 11:00 a.m.
Winged Vessel turning *PIC* -- Randy G -- Wednesday, 9 April 2008, at 1:02 a.m.
13 messages -- Newest posted Thursday, 10 April 2008, at 12:26 p.m.
No Turning ... -- Tim Grenville-Cleave -- Wednesday, 9 April 2008, at 6:12 a.m.
16 messages -- Newest posted Wednesday, 9 April 2008, at 7:27 p.m.
Bandsaw Choice -- Tommy Holmes -- Wednesday, 9 April 2008, at 4:54 p.m.
20 messages -- Newest posted Monday, 14 April 2008, at 10:47 p.m.
Beginner turning problem -- Mark Trulock -- Wednesday, 9 April 2008, at 5:38 p.m.
6 messages -- Newest posted Thursday, 10 April 2008, at 7:02 a.m.
Microwave drying any good? -- Alan Tolchinsky -- Wednesday, 9 April 2008, at 6:32 p.m.
17 messages -- Newest posted Friday, 11 April 2008, at 6:40 p.m.
WTB Tool Cabinet/Chest -- bowlman -- Wednesday, 9 April 2008, at 6:41 p.m.
6 messages -- Newest posted Thursday, 10 April 2008, at 11:43 a.m.
Chestnut -- Lynn Edwards -- Wednesday, 9 April 2008, at 7:32 p.m.
6 messages -- Newest posted Friday, 11 April 2008, at 10:16 p.m.
OT: Looking for a source of Paulownia -- tm -- Thursday, 10 April 2008, at 6:00 a.m.
5 messages -- Newest posted Thursday, 10 April 2008, at 10:56 p.m.
Basswood score *PIC* -- john lucas -- Thursday, 10 April 2008, at 7:59 a.m.
7 messages -- Newest posted Sunday, 13 April 2008, at 1:33 p.m.
Thanks Everyone *NM* -- Ron in Drums PA -- Thursday, 10 April 2008, at 8:52 a.m.
1 message
Thinking of taking the plunge-tools? *LINK* -- Tony Sade (Charleston, WV) -- Thursday, 10 April 2008, at 9:04 a.m.
9 messages -- Newest posted Tuesday, 15 April 2008, at 2:56 p.m.
Terrific chat with Jacques Vesery -- Mike Stafford -- Thursday, 10 April 2008, at 9:30 a.m.
18 messages -- Newest posted Tuesday, 15 April 2008, at 7:59 a.m.
Predicting crotch figure? -- Ken Platt (Granby, CT) -- Thursday, 10 April 2008, at 11:24 a.m.
4 messages -- Newest posted Thursday, 10 April 2008, at 5:28 p.m.
Chechen domed lid box.... *PIC* -- Mike Stafford -- Thursday, 10 April 2008, at 9:49 p.m.
18 messages -- Newest posted Sunday, 13 April 2008, at 6:42 a.m.
Magnolia wood? -- Mark Paulley -- Friday, 11 April 2008, at 9:10 a.m.
9 messages -- Newest posted Tuesday, 15 April 2008, at 8:38 p.m.
Bethlehem Olivewood Supply Company -- bob henry -- Friday, 11 April 2008, at 12:28 p.m.
4 messages -- Newest posted Sunday, 13 April 2008, at 12:50 a.m.
A New Grandpa *PIC* -- Bill Grumbine (Kutztown PA) -- Friday, 11 April 2008, at 3:15 p.m.
43 messages -- Newest posted Thursday, 17 April 2008, at 10:09 a.m.
Looking for Nick Cook Video Clip... -- jwoodwright -- Friday, 11 April 2008, at 10:57 p.m.
5 messages -- Newest posted Saturday, 12 April 2008, at 5:47 p.m.
Orca Lathe *PIC* -- Jim Shewan -- Saturday, 12 April 2008, at 1:23 a.m.
6 messages -- Newest posted Saturday, 12 April 2008, at 9:40 p.m.
Glue Question -- Sean Troy -- Saturday, 12 April 2008, at 11:41 a.m.
11 messages -- Newest posted Sunday, 13 April 2008, at 11:09 p.m.
Woodworking channel is gone? -- keith zimmerman, Normal IL -- Saturday, 12 April 2008, at 1:18 p.m.
7 messages -- Newest posted Saturday, 12 April 2008, at 7:33 p.m.
Grinding of Spindle Gouges??? -- Jesper, Denmark -- Sunday, 13 April 2008, at 5:43 a.m.
12 messages -- Newest posted Sunday, 13 April 2008, at 4:13 p.m.
To scrape or not to scrape? -- Steve ponch -- Sunday, 13 April 2008, at 9:42 a.m.
22 messages -- Newest posted Sunday, 13 April 2008, at 10:23 p.m.
Cocobolo Wedding Goblet *PIC* -- Curt Fuller -- Sunday, 13 April 2008, at 1:58 p.m.
5 messages -- Newest posted Monday, 14 April 2008, at 9:59 p.m.
Gloat or not? -- steve antonucci -- Sunday, 13 April 2008, at 4:41 p.m.
12 messages -- Newest posted Monday, 14 April 2008, at 7:26 p.m.
making drums round -- matt -- Sunday, 13 April 2008, at 7:02 p.m.
6 messages -- Newest posted Wednesday, 16 April 2008, at 11:55 a.m.
firewood *PIC* -- John K Jordan -- Sunday, 13 April 2008, at 11:21 p.m.
8 messages -- Newest posted Monday, 14 April 2008, at 10:20 a.m.
Punky Pen Blanks -- Christine -- Monday, 14 April 2008, at 10:26 a.m.
7 messages -- Newest posted Monday, 14 April 2008, at 10:48 p.m.
Re: Face shield review -- Stuart Johnson -- Monday, 14 April 2008, at 11:20 a.m.
9 messages -- Newest posted Tuesday, 15 April 2008, at 7:22 p.m.
Baseball bats *PIC* -- Jim King -- Monday, 14 April 2008, at 3:42 p.m.
5 messages -- Newest posted Monday, 14 April 2008, at 10:00 p.m.
Vacuum Chuck & Platter Issue? -- Stuart Johnson -- Monday, 14 April 2008, at 7:20 p.m.
7 messages -- Newest posted Wednesday, 16 April 2008, at 11:27 a.m.
Acrylic pen blank - bubbles -- Larry Cary -- Monday, 14 April 2008, at 7:28 p.m.
2 messages -- Newest posted Monday, 14 April 2008, at 10:07 p.m.
Homemade Lathe Light... Pipes? -- Allen Neighbors -- Monday, 14 April 2008, at 8:27 p.m.
23 messages -- Newest posted Tuesday, 22 April 2008, at 10:50 a.m.
A piece of junk! -- WF Railey -- Monday, 14 April 2008, at 11:10 p.m.
8 messages -- Newest posted Wednesday, 16 April 2008, at 1:10 a.m.
Bowl: Ocean creatures did it! *PIC* -- david -- Tuesday, 15 April 2008, at 2:51 a.m.
13 messages -- Newest posted Wednesday, 16 April 2008, at 3:54 p.m.
got the ORCA *PIC* -- Jim Shewan -- Tuesday, 15 April 2008, at 5:16 a.m.
3 messages -- Newest posted Wednesday, 16 April 2008, at 2:42 a.m.
Wolverine Jig Knob Replacement? -- Jerry Hall -- Tuesday, 15 April 2008, at 10:05 a.m.
15 messages -- Newest posted Tuesday, 15 April 2008, at 11:15 p.m.
Cherry Box, wasn't suppose to be *PIC* -- Greg Haugen -- Tuesday, 15 April 2008, at 12:51 p.m.
7 messages -- Newest posted Wednesday, 16 April 2008, at 9:55 a.m.
Pink flame bat photo *PIC* -- Jim King -- Tuesday, 15 April 2008, at 2:29 p.m.
3 messages -- Newest posted Wednesday, 16 April 2008, at 1:15 a.m.
Madrone Gloat *PIC* -- Ed Larson -- Wednesday, 16 April 2008, at 12:53 p.m.
18 messages -- Newest posted Sunday, 20 April 2008, at 7:47 p.m.
Wild Hare Idea *LINK* -- charlie belden -- Wednesday, 16 April 2008, at 12:59 p.m.
1 message
Swinging Lathe Light... *PIC* -- Allen Neighbors -- Wednesday, 16 April 2008, at 2:14 p.m.
8 messages -- Newest posted Thursday, 17 April 2008, at 8:58 a.m.
Rose Engine Turned Acrylic Bowl *PIC* -- Ed Davidson (Colorado Springs) -- Wednesday, 16 April 2008, at 6:02 p.m.
18 messages -- Newest posted Friday, 18 April 2008, at 2:20 p.m.
OT: Don't you just love spammers. -- Brian Hahn in SW Wisconsin -- Thursday, 17 April 2008, at 6:38 a.m.
5 messages -- Newest posted Friday, 18 April 2008, at 6:23 a.m.
Choosing a Thompson Gouge -- Steve in NC -- Thursday, 17 April 2008, at 12:25 p.m.
14 messages -- Newest posted Saturday, 19 April 2008, at 4:57 p.m.
Sort of WW related- -- steve antonucci -- Thursday, 17 April 2008, at 12:54 p.m.
4 messages -- Newest posted Thursday, 17 April 2008, at 3:01 p.m.
Aclear pen finish -- Larry Cary -- Thursday, 17 April 2008, at 8:32 p.m.
5 messages -- Newest posted Monday, 21 April 2008, at 10:48 a.m.
Bleached Wood... -- Wally Dickerman in Arizona -- Thursday, 17 April 2008, at 11:34 p.m.
15 messages -- Newest posted Friday, 18 April 2008, at 8:22 p.m.
holes for Niles SS stoppers -- Ed Karch -- Friday, 18 April 2008, at 9:22 a.m.
13 messages -- Newest posted Sunday, 20 April 2008, at 11:43 a.m.
Bowl gouge - revisited & small tool gloat -- Ray Carson - Lawrenceville, NJ -- Friday, 18 April 2008, at 11:32 a.m.
3 messages -- Newest posted Saturday, 19 April 2008, at 4:49 a.m.
Back Tracking *PIC* -- Peter Hyde -- Friday, 18 April 2008, at 12:27 p.m.
2 messages -- Newest posted Friday, 18 April 2008, at 1:17 p.m.
Drill Press -- elliott -- Friday, 18 April 2008, at 2:48 p.m.
6 messages -- Newest posted Friday, 18 April 2008, at 9:31 p.m.
elbotool info. -- joaz -- Friday, 18 April 2008, at 5:37 p.m.
10 messages -- Newest posted Saturday, 19 April 2008, at 7:30 p.m.
Dust Collector -- elliott -- Friday, 18 April 2008, at 6:59 p.m.
6 messages -- Newest posted Saturday, 19 April 2008, at 12:32 p.m.
WooHoo..got my Jet 1642 today -- Jim(IN) -- Friday, 18 April 2008, at 9:41 p.m.
7 messages -- Newest posted Saturday, 19 April 2008, at 7:31 p.m.
Major Gloat -- mfoster -- Friday, 18 April 2008, at 10:02 p.m.
14 messages -- Newest posted Saturday, 19 April 2008, at 11:24 p.m.
John Lucas - hand mirrors? -- John K Jordan -- Friday, 18 April 2008, at 11:35 p.m.
4 messages -- Newest posted Sunday, 20 April 2008, at 4:24 p.m.
help, somebody stop me... *PIC* -- John K Jordan -- Friday, 18 April 2008, at 11:40 p.m.
17 messages -- Newest posted Sunday, 20 April 2008, at 1:20 p.m.
Air filtration system -- elliott -- Saturday, 19 April 2008, at 8:44 a.m.
11 messages -- Newest posted Saturday, 19 April 2008, at 10:56 p.m.
Screwchuck for small objects..... *PIC* -- Jesper, Denmark -- Saturday, 19 April 2008, at 12:52 p.m.
3 messages -- Newest posted Saturday, 19 April 2008, at 1:41 p.m.
Fresh Cut Holly: What do I have? -- Jerry Hall -- Saturday, 19 April 2008, at 4:51 p.m.
8 messages -- Newest posted Sunday, 20 April 2008, at 11:56 p.m.
Olive Wood Question -- Ron In Sterling CT -- Saturday, 19 April 2008, at 8:14 p.m.
15 messages -- Newest posted Monday, 21 April 2008, at 6:18 a.m.
Oneway 1640 Controls Modification *PIC* -- Allen Neighbors -- Sunday, 20 April 2008, at 12:25 a.m.
7 messages -- Newest posted Sunday, 20 April 2008, at 1:21 p.m.
Spalted Birch Box *PIC* -- Greg Haugen -- Sunday, 20 April 2008, at 2:57 p.m.
5 messages -- Newest posted Monday, 21 April 2008, at 1:38 a.m.
small screw chuck idea's -- Dennis Taylor -- Sunday, 20 April 2008, at 7:56 p.m.
7 messages -- Newest posted Monday, 21 April 2008, at 2:39 p.m.
Man, am I tired... *PIC* -- steve antonucci -- Sunday, 20 April 2008, at 7:56 p.m.
8 messages -- Newest posted Monday, 21 April 2008, at 9:24 a.m.
Hand Mirror *PIC* -- Ed Davidson (Colorado Springs) -- Sunday, 20 April 2008, at 8:17 p.m.
4 messages -- Newest posted Monday, 21 April 2008, at 8:51 a.m.
Husky Pro air compressor ??? -- Ed Moore in SW Virginia -- Sunday, 20 April 2008, at 10:40 p.m.
11 messages -- Newest posted Tuesday, 22 April 2008, at 10:58 a.m.
Face Plates -- Sean Troy -- Sunday, 20 April 2008, at 11:18 p.m.
13 messages -- Newest posted Monday, 21 April 2008, at 7:25 p.m.
Help on turning -- Wayne Carson -- Monday, 21 April 2008, at 12:07 a.m.
9 messages -- Newest posted Monday, 21 April 2008, at 7:25 p.m.
Random Orbital Sanders, air-operated ?? -- Ed Moore in SW Virginia -- Monday, 21 April 2008, at 6:46 a.m.
7 messages -- Newest posted Tuesday, 22 April 2008, at 1:55 a.m.
Is Chinese Chestnut good to turn? -- Dominic Greco in Richboro PA -- Monday, 21 April 2008, at 7:36 a.m.
7 messages -- Newest posted Monday, 21 April 2008, at 9:33 p.m.
Air Filtration- Still Undecided -- elliott -- Monday, 21 April 2008, at 8:54 a.m.
2 messages -- Newest posted Monday, 21 April 2008, at 9:54 a.m.
Southern States Symposium? -- Ruth Niles -- Monday, 21 April 2008, at 8:55 a.m.
17 messages -- Newest posted Tuesday, 22 April 2008, at 8:15 a.m.
Recommended Wood Sources -- Greg Haugen -- Monday, 21 April 2008, at 10:58 a.m.
6 messages -- Newest posted Tuesday, 22 April 2008, at 8:12 a.m.
Allen wrench chisel -- Bob Macgregor -- Monday, 21 April 2008, at 12:34 p.m.
5 messages -- Newest posted Tuesday, 22 April 2008, at 10:39 a.m.
Turning blanks -- Michael Brady -- Monday, 21 April 2008, at 12:52 p.m.
11 messages -- Newest posted Tuesday, 22 April 2008, at 2:29 p.m.
I have crayons!!! OT!!! -- Mike Stafford -- Monday, 21 April 2008, at 2:02 p.m.
31 messages -- Newest posted Thursday, 24 April 2008, at 6:39 p.m.
What an idiot!! -- Gary M -- Monday, 21 April 2008, at 2:03 p.m.
8 messages -- Newest posted Wednesday, 23 April 2008, at 4:53 p.m.
Shaker style knob -- Joe in a Cleveland Suburb -- Monday, 21 April 2008, at 4:15 p.m.
6 messages -- Newest posted Tuesday, 22 April 2008, at 8:12 a.m.
4x4 maple turning squares -- Mike Rubes, Apex, NC -- Monday, 21 April 2008, at 7:10 p.m.
9 messages -- Newest posted Wednesday, 23 April 2008, at 2:47 p.m.
HEMLOCK--ANY GOOD? -- Aage Rendalen -- Monday, 21 April 2008, at 7:55 p.m.
7 messages -- Newest posted Wednesday, 23 April 2008, at 12:37 a.m.
Milo box... *PIC* -- Mike Stafford -- Monday, 21 April 2008, at 10:00 p.m.
7 messages -- Newest posted Thursday, 24 April 2008, at 6:29 p.m.
stack laminated bowls *LINK* -- john lucas -- Monday, 21 April 2008, at 10:20 p.m.
3 messages -- Newest posted Tuesday, 22 April 2008, at 8:55 a.m.
Thanks to Jen for the FML tour -- Mike Hamilton -- Monday, 21 April 2008, at 10:58 p.m.
5 messages -- Newest posted Tuesday, 22 April 2008, at 2:41 p.m.
Cutting Corian -- Craig Daymon -- Monday, 21 April 2008, at 11:32 p.m.
4 messages -- Newest posted Wednesday, 23 April 2008, at 10:56 a.m.
What's louder than a Stihl at full tilt? -- Dick Coers -- Tuesday, 22 April 2008, at 12:59 a.m.
23 messages -- Newest posted Thursday, 24 April 2008, at 8:45 a.m.
First Teaching Experience - Followup -- Steve in NC -- Tuesday, 22 April 2008, at 7:30 a.m.
5 messages -- Newest posted Wednesday, 23 April 2008, at 12:35 p.m.
Elliot - drill press "deal"... *LINK* -- JL -- Tuesday, 22 April 2008, at 11:03 a.m.
2 messages -- Newest posted Tuesday, 22 April 2008, at 12:56 p.m.
Turning related visit in the DC Metro -- steve antonucci -- Tuesday, 22 April 2008, at 4:57 p.m.
10 messages -- Newest posted Wednesday, 23 April 2008, at 9:49 a.m.
SS Niles Bottle stoppers -- Bruce in Saint John, N.B. -- Tuesday, 22 April 2008, at 7:37 p.m.
8 messages -- Newest posted Wednesday, 23 April 2008, at 10:52 a.m.
Bowl turning and reaction wood -- Aage Rendalen -- Tuesday, 22 April 2008, at 9:09 p.m.
10 messages -- Newest posted Wednesday, 23 April 2008, at 11:39 p.m.
oneway 1640 control modification -- Don from Denver------WebKitFormBoundaryDFBD+ZWAJ30 -- Tuesday, 22 April 2008, at 11:10 p.m.
2 messages -- Newest posted Thursday, 24 April 2008, at 1:21 p.m.
New Shop Started *PIC* -- Stuart Johnson -- Wednesday, 23 April 2008, at 11:02 a.m.
5 messages -- Newest posted Wednesday, 23 April 2008, at 10:21 p.m.
Bubinga laminated bowl *PIC* -- Bill Stehman -- Wednesday, 23 April 2008, at 11:51 a.m.
4 messages -- Newest posted Thursday, 24 April 2008, at 12:43 a.m.
OT Digitizing 35mm slides -- DickL -- Wednesday, 23 April 2008, at 11:53 a.m.
12 messages -- Newest posted Thursday, 24 April 2008, at 1:24 p.m.
OT Water based Varnish for Floors -- Steve in NC -- Wednesday, 23 April 2008, at 12:39 p.m.
8 messages -- Newest posted Thursday, 24 April 2008, at 12:26 p.m.
OT Mileage Compensation OT -- Barbara Gill, Remlik VA -- Wednesday, 23 April 2008, at 2:29 p.m.
14 messages -- Newest posted Thursday, 24 April 2008, at 7:18 p.m.
Tonight's Chat: Ebonizing Techniques -- Steve Russell -- Wednesday, 23 April 2008, at 3:10 p.m.
6 messages -- Newest posted Thursday, 24 April 2008, at 5:40 p.m.
tormek and a bowl gouge -- woody in vt -- Wednesday, 23 April 2008, at 7:22 p.m.
8 messages -- Newest posted Monday, 28 April 2008, at 6:52 p.m.
Colorwood Finish -- elliott -- Thursday, 24 April 2008, at 9:14 a.m.
6 messages -- Newest posted Thursday, 24 April 2008, at 10:28 p.m.
Moving to Indy, some tools for sale. -- Craig Daymon -- Thursday, 24 April 2008, at 9:29 a.m.
5 messages -- Newest posted Monday, 28 April 2008, at 4:52 p.m.
Olive/Walnut goblet *PIC* -- Curt Fuller -- Thursday, 24 April 2008, at 9:02 p.m.
5 messages -- Newest posted Friday, 25 April 2008, at 2:53 p.m.
I'm in the Turned for Use show" -- john lucas -- Thursday, 24 April 2008, at 10:37 p.m.
20 messages -- Newest posted Saturday, 26 April 2008, at 9:23 a.m.
grape vine -- Mark Williamson -- Thursday, 24 April 2008, at 11:10 p.m.
8 messages -- Newest posted Friday, 25 April 2008, at 1:51 p.m.
Big ol' walnut box....made it in.... -- Mike Stafford -- Friday, 25 April 2008, at 6:36 a.m.
14 messages -- Newest posted Saturday, 26 April 2008, at 10:42 p.m.
OT: Diesel in a gas engine -- steve antonucci -- Friday, 25 April 2008, at 9:02 a.m.
17 messages -- Newest posted Friday, 25 April 2008, at 4:39 p.m.
Stihl won't start -- Stuart Johnson -- Friday, 25 April 2008, at 10:39 a.m.
15 messages -- Newest posted Saturday, 26 April 2008, at 11:50 a.m.
Roofing Hatchet *PIC* -- Jerry Hall -- Friday, 25 April 2008, at 12:37 p.m.
5 messages -- Newest posted Saturday, 26 April 2008, at 1:38 a.m.
Willow Burls. -- Bob Rogne -- Friday, 25 April 2008, at 6:01 p.m.
4 messages -- Newest posted Monday, 28 April 2008, at 6:37 p.m.
Chainsaw Gas -- Barbara Gill, Remlik VA -- Friday, 25 April 2008, at 8:53 p.m.
26 messages -- Newest posted Saturday, 26 April 2008, at 10:20 p.m.
Re:Willow Burl -- Larry from Oregon -- Friday, 25 April 2008, at 10:06 p.m.
2 messages -- Newest posted Sunday, 27 April 2008, at 1:31 p.m.
Ebony -- scottinphoenix -- Saturday, 26 April 2008, at 3:15 p.m.
3 messages -- Newest posted Sunday, 27 April 2008, at 9:02 a.m.
Husqvarna E345 Chainsaw Question -- Clem Wixted -- Sunday, 27 April 2008, at 8:01 a.m.
9 messages -- Newest posted Monday, 28 April 2008, at 10:10 a.m.
Beat myself up again yesterday... *PIC* -- steve antonucci -- Sunday, 27 April 2008, at 9:35 a.m.
7 messages -- Newest posted Monday, 28 April 2008, at 8:21 a.m.
Worm holes in Sycamore question. -- Barry Irby -- Sunday, 27 April 2008, at 5:05 p.m.
10 messages -- Newest posted Monday, 28 April 2008, at 8:12 p.m.
Southern States Symposium Report -- Gary Evans Tallassee, TN -- Sunday, 27 April 2008, at 5:07 p.m.
21 messages -- Newest posted Wednesday, 30 April 2008, at 7:17 p.m.
Turning Chestnut Wood -- Jim Tusant -- Monday, 28 April 2008, at 11:33 a.m.
3 messages -- Newest posted Monday, 28 April 2008, at 7:02 p.m.
Chainsaw Oil -- Clem Wixted -- Monday, 28 April 2008, at 11:53 a.m.
6 messages -- Newest posted Tuesday, 29 April 2008, at 8:37 a.m.
Walnut Keepsake Box *PIC* -- Greg Haugen -- Monday, 28 April 2008, at 12:29 p.m.
3 messages -- Newest posted Monday, 28 April 2008, at 2:17 p.m.
Dyed box elder box.... *PIC* -- Mike Stafford -- Monday, 28 April 2008, at 12:42 p.m.
6 messages -- Newest posted Tuesday, 29 April 2008, at 1:20 a.m.
2-D Gouge Review -- Steve in NC -- Monday, 28 April 2008, at 12:54 p.m.
8 messages -- Newest posted Tuesday, 29 April 2008, at 2:55 p.m.
Wally, I think I found out... *PIC* -- Allen Neighbors -- Monday, 28 April 2008, at 1:19 p.m.
2 messages -- Newest posted Monday, 28 April 2008, at 3:14 p.m.
Need advice on finish -- ILYA ZAVORIN -- Monday, 28 April 2008, at 4:27 p.m.
11 messages -- Newest posted Monday, 28 April 2008, at 9:13 p.m.
Lathe Bed Exyension for General 260 -- bowlman -- Monday, 28 April 2008, at 5:26 p.m.
5 messages -- Newest posted Tuesday, 29 April 2008, at 9:31 a.m.
Source for Nichrome wire -- stacey s -- Monday, 28 April 2008, at 6:12 p.m.
23 messages -- Newest posted Wednesday, 30 April 2008, at 3:38 p.m.
Greenheart ??? -- E.T. -- Monday, 28 April 2008, at 9:39 p.m.
12 messages -- Newest posted Wednesday, 30 April 2008, at 5:37 a.m.
Tornados -- Sean Troy -- Monday, 28 April 2008, at 10:39 p.m.
16 messages -- Newest posted Wednesday, 30 April 2008, at 8:37 a.m.
Can't wait for spring (pics) -- GolfSteve in Calgary -- Tuesday, 29 April 2008, at 4:24 p.m.
8 messages -- Newest posted Wednesday, 30 April 2008, at 12:07 p.m.
Tenon failure *PIC* -- steve antonucci -- Tuesday, 29 April 2008, at 9:22 p.m.
8 messages -- Newest posted Wednesday, 30 April 2008, at 8:59 p.m.
Help With Threading *PIC* -- Ron McKinley -- Tuesday, 29 April 2008, at 11:18 p.m.
16 messages -- Newest posted Thursday, 1 May 2008, at 12:33 a.m.
What a difference 100 + years makes -- Randy Johnson -- Wednesday, 30 April 2008, at 6:42 a.m.
2 messages -- Newest posted Wednesday, 30 April 2008, at 9:15 a.m.
The kindness of turners -- Mike Rubes, Apex, NC -- Wednesday, 30 April 2008, at 12:50 p.m.
2 messages -- Newest posted Wednesday, 30 April 2008, at 3:34 p.m.
SSS -- Mac -- Wednesday, 30 April 2008, at 1:00 p.m.
9 messages -- Newest posted Wednesday, 30 April 2008, at 9:19 p.m.
SSS Gallery Pictures *PIC* -- stacey s -- Wednesday, 30 April 2008, at 8:57 p.m.
18 messages -- Newest posted Thursday, 1 May 2008, at 3:30 p.m.
Newbie turning plane knobs -- Tom MacGregor -- Thursday, 1 May 2008, at 6:15 a.m.
8 messages -- Newest posted Thursday, 1 May 2008, at 8:28 p.m.
Last turning for a while *PIC* -- Craig Daymon -- Thursday, 1 May 2008, at 9:49 a.m.
7 messages -- Newest posted Thursday, 1 May 2008, at 6:02 p.m.
Turning vacation *PIC* -- Carol - now in NC Nebraska -- Friday, 2 May 2008, at 10:29 p.m.
1 message
#7 *PIC* -- Carol - now in NC Nebraska -- Friday, 2 May 2008, at 11:22 p.m.
19 messages -- Newest posted Sunday, 4 May 2008, at 3:47 p.m.
Foot Treadle Powered Lathe -- Ken Oakley-Sunny St. Cloud, Fla -- Saturday, 3 May 2008, at 9:22 a.m.
2 messages -- Newest posted Saturday, 3 May 2008, at 8:28 p.m.
tool handles -- don lewonczyk -- Saturday, 3 May 2008, at 3:00 p.m.
4 messages -- Newest posted Sunday, 4 May 2008, at 8:04 a.m.
Thompson tools -- don lewonczyk -- Saturday, 3 May 2008, at 3:12 p.m.
2 messages -- Newest posted Saturday, 3 May 2008, at 4:05 p.m.
JET 1220VS -- Mike Cunningham -- Saturday, 3 May 2008, at 6:52 p.m.
18 messages -- Newest posted Sunday, 4 May 2008, at 6:13 p.m.
Jet 1642 HELP -- John Packett -- Saturday, 3 May 2008, at 7:37 p.m.
9 messages -- Newest posted Sunday, 4 May 2008, at 8:46 p.m.
wow-a free day to do nothing but turn -- john lucas -- Sunday, 4 May 2008, at 10:48 a.m.
15 messages -- Newest posted Monday, 5 May 2008, at 8:51 p.m.
Piercing question -- Greg Burnard -- Sunday, 4 May 2008, at 2:51 p.m.
17 messages -- Newest posted Wednesday, 7 May 2008, at 2:46 p.m.
New Michaelson bowl gouge -- Bill Neddow -- Sunday, 4 May 2008, at 10:47 p.m.
13 messages -- Newest posted Tuesday, 6 May 2008, at 11:04 a.m.
6 prong drive center help needed -- bowlman -- Monday, 5 May 2008, at 5:37 a.m.
6 messages -- Newest posted Monday, 5 May 2008, at 6:42 p.m.
Lathe Height? -- Tom -- Monday, 5 May 2008, at 6:56 a.m.
18 messages -- Newest posted Tuesday, 6 May 2008, at 6:10 p.m.
Blue weave *PIC* -- eaglesc -- Monday, 5 May 2008, at 12:37 p.m.
8 messages -- Newest posted Monday, 5 May 2008, at 4:55 p.m.
Links anyone? -- bowlman -- Monday, 5 May 2008, at 6:46 p.m.
1 message
Attention Ellis!! -- Dominic Greco in Richboro PA -- Monday, 5 May 2008, at 7:19 p.m.
6 messages -- Newest posted Monday, 5 May 2008, at 10:16 p.m.
Powermatic 3520B Lathe -- Wesley -- Monday, 5 May 2008, at 7:32 p.m.
7 messages -- Newest posted Tuesday, 6 May 2008, at 9:47 a.m.
Say it with me... -- steve antonucci -- Monday, 5 May 2008, at 8:30 p.m.
3 messages -- Newest posted Monday, 5 May 2008, at 10:03 p.m.
Messageboard -- Larry Clinton At Frankfort (Central)., Indiana -- Monday, 5 May 2008, at 10:19 p.m.
4 messages -- Newest posted Monday, 5 May 2008, at 11:33 p.m.
A Couple of Roller Balls ;-) -- Jim Shaver Oakville, Ont. -- Monday, 5 May 2008, at 11:07 p.m.
10 messages -- Newest posted Thursday, 8 May 2008, at 9:51 a.m.
Sealing end grain of fresh cut logs -- Warren Chernoff -- Monday, 5 May 2008, at 11:44 p.m.
15 messages -- Newest posted Wednesday, 7 May 2008, at 8:26 a.m.
Aligning band saw blade -- chris krohn -- Tuesday, 6 May 2008, at 12:41 a.m.
6 messages -- Newest posted Tuesday, 6 May 2008, at 5:28 p.m.
Bling *PIC* -- eaglesc -- Tuesday, 6 May 2008, at 5:56 a.m.
4 messages -- Newest posted Tuesday, 6 May 2008, at 3:55 p.m.
Wheels on a 3520? -- Steve in NC -- Tuesday, 6 May 2008, at 7:23 a.m.
17 messages -- Newest posted Thursday, 8 May 2008, at 1:37 a.m.
Nichols Bowl Lathe for Leftys..... -- Wally Dickerman in Arizona -- Wednesday, 7 May 2008, at 3:52 p.m.
6 messages -- Newest posted Thursday, 8 May 2008, at 11:15 p.m.
Shellac Sanding Sealer Question -- dan oliphant -- Wednesday, 7 May 2008, at 4:43 p.m.
12 messages -- Newest posted Thursday, 8 May 2008, at 9:45 p.m.
Box Elder HF -- Dick Parr -- Wednesday, 7 May 2008, at 4:59 p.m.
6 messages -- Newest posted Friday, 9 May 2008, at 1:58 p.m.
photos -- jimtex -- Wednesday, 7 May 2008, at 9:18 p.m.
5 messages -- Newest posted Thursday, 8 May 2008, at 2:02 p.m.
pill box -- john lucas -- Thursday, 8 May 2008, at 9:39 a.m.
9 messages -- Newest posted Thursday, 8 May 2008, at 9:10 p.m.
inside out ornaments *PIC* -- john lucas -- Thursday, 8 May 2008, at 9:44 a.m.
7 messages -- Newest posted Thursday, 8 May 2008, at 8:24 p.m.
Gouge Removal -- Jim Tusant -- Thursday, 8 May 2008, at 10:21 a.m.
8 messages -- Newest posted Thursday, 8 May 2008, at 3:13 p.m.
purple heart mirror *PIC* -- john lucas -- Thursday, 8 May 2008, at 12:06 p.m.
13 messages -- Newest posted Friday, 9 May 2008, at 8:43 p.m.
OT-Outdoor Wood Boiler -- George Van -- Thursday, 8 May 2008, at 12:35 p.m.
7 messages -- Newest posted Thursday, 8 May 2008, at 11:54 p.m.
OT -- bleach and asphalt shingles? -- GaryG in MD -- Thursday, 8 May 2008, at 2:14 p.m.
10 messages -- Newest posted Saturday, 10 May 2008, at 12:37 a.m.
OSB for shop walls -- Stuart Johnson -- Friday, 9 May 2008, at 4:40 p.m.
16 messages -- Newest posted Tuesday, 13 May 2008, at 1:43 a.m.
Death of a Coffee Mug -- Bill Grumbine (Kutztown PA) -- Friday, 9 May 2008, at 6:13 p.m.
28 messages -- Newest posted Tuesday, 13 May 2008, at 3:10 p.m.
jet 1236-broken belts -- Nick -- Friday, 9 May 2008, at 7:17 p.m.
4 messages -- Newest posted Sunday, 11 May 2008, at 8:34 a.m.
Escoulen Chuck -- Woodie49 -- Friday, 9 May 2008, at 9:59 p.m.
6 messages -- Newest posted Monday, 12 May 2008, at 3:16 p.m.
Ci1 easy rougher carbide tool -- joaz -- Saturday, 10 May 2008, at 7:12 p.m.
17 messages -- Newest posted Tuesday, 13 May 2008, at 6:49 p.m.
Badger Hair... *PIC* -- Ed Davidson (Colorado Springs) -- Saturday, 10 May 2008, at 8:37 p.m.
9 messages -- Newest posted Monday, 12 May 2008, at 7:36 p.m.
bandsaw purchase -- glennk -- Saturday, 10 May 2008, at 9:57 p.m.
6 messages -- Newest posted Tuesday, 13 May 2008, at 12:40 p.m.
Coralling Turning Accoutrements *LINK* -- charlie belden -- Sunday, 11 May 2008, at 12:14 p.m.
2 messages -- Newest posted Sunday, 11 May 2008, at 1:17 p.m.
Need Source for 5" Beveled Mirrors -- Larry_In_Lima -- Sunday, 11 May 2008, at 4:29 p.m.
9 messages -- Newest posted Monday, 12 May 2008, at 10:49 p.m.
Happy Mother's Day -- Steven Kubien -- Sunday, 11 May 2008, at 4:48 p.m.
4 messages -- Newest posted Monday, 12 May 2008, at 7:33 a.m.
Near disaster!!!! *PIC* -- Peter Hyde -- Sunday, 11 May 2008, at 5:13 p.m.
9 messages -- Newest posted Monday, 12 May 2008, at 5:02 p.m.
Brokers -- Jim Shaver Oakville, Ont. -- Sunday, 11 May 2008, at 5:34 p.m.
5 messages -- Newest posted Tuesday, 13 May 2008, at 1:38 p.m.
OT Identity theft -- Al Neighbors -- Sunday, 11 May 2008, at 6:21 p.m.
3 messages -- Newest posted Monday, 12 May 2008, at 6:15 p.m.
spring flowers *PIC* -- robert davis -- Sunday, 11 May 2008, at 6:22 p.m.
4 messages -- Newest posted Monday, 12 May 2008, at 11:04 a.m.
Pouring acrylic penblanks... -- Mark Williamson -- Monday, 12 May 2008, at 2:43 p.m.
3 messages -- Newest posted Thursday, 15 May 2008, at 8:44 a.m.
Where do you do your pyrography? -- Doug Bartos -- Monday, 12 May 2008, at 2:45 p.m.
9 messages -- Newest posted Monday, 12 May 2008, at 11:44 p.m.
OT Firefox will not mark as read -- Peter Charles Fagg (UK) -- Monday, 12 May 2008, at 4:28 p.m.
6 messages -- Newest posted Tuesday, 13 May 2008, at 3:05 p.m.
IndyFest '08 -- Ray Thompson - Middletown,IN -- Monday, 12 May 2008, at 10:02 p.m.
11 messages -- Newest posted Thursday, 15 May 2008, at 8:28 p.m.
New master of woodturning -- john lucas -- Tuesday, 13 May 2008, at 9:59 a.m.
8 messages -- Newest posted Thursday, 15 May 2008, at 9:15 a.m.
New Shop Lighting -- Stuart Johnson -- Tuesday, 13 May 2008, at 3:59 p.m.
9 messages -- Newest posted Thursday, 15 May 2008, at 1:03 p.m.
Gouge Removal -- Jim Tusant -- Tuesday, 13 May 2008, at 4:53 p.m.
1 message
Slightly OT: cutting cut nails -- keith zimmerman, Normal IL -- Tuesday, 13 May 2008, at 7:09 p.m.
11 messages -- Newest posted Wednesday, 14 May 2008, at 9:14 a.m.
Accepted! *PIC* -- Rick Davenport -- Tuesday, 13 May 2008, at 8:02 p.m.
24 messages -- Newest posted Saturday, 17 May 2008, at 11:05 p.m.
Wood trade anyone? -- steve antonucci -- Tuesday, 13 May 2008, at 8:14 p.m.
3 messages -- Newest posted Wednesday, 14 May 2008, at 1:57 p.m.
Bailey's Chainsaw Chains -- Wilford Bickel -- Wednesday, 14 May 2008, at 11:00 a.m.
11 messages -- Newest posted Friday, 16 May 2008, at 2:23 p.m.
"Aircraft" drill bits? -- JL -- Wednesday, 14 May 2008, at 1:28 p.m.
12 messages -- Newest posted Friday, 16 May 2008, at 3:03 p.m.
Denied *PIC* -- Raymond Overman in SC -- Wednesday, 14 May 2008, at 1:48 p.m.
19 messages -- Newest posted Friday, 16 May 2008, at 9:57 a.m.
Finally back to WC -- Cyril Griesbach -- Wednesday, 14 May 2008, at 2:46 p.m.
5 messages -- Newest posted Friday, 16 May 2008, at 9:50 a.m.
Drilling Holes in Sandstone? -- bowlman -- Wednesday, 14 May 2008, at 6:53 p.m.
6 messages -- Newest posted Thursday, 15 May 2008, at 10:43 a.m.
Brian Hahn's shop -- john lucas -- Thursday, 15 May 2008, at 7:53 a.m.
2 messages -- Newest posted Friday, 16 May 2008, at 6:44 a.m.
Something to look at *PIC* -- steve antonucci -- Thursday, 15 May 2008, at 11:04 a.m.
10 messages -- Newest posted Friday, 16 May 2008, at 8:53 a.m.
Yeah, I turn a lot... *PIC* -- steve antonucci -- Thursday, 15 May 2008, at 11:07 a.m.
3 messages -- Newest posted Thursday, 15 May 2008, at 5:26 p.m.
Two Evenings With Graeme Priddle -- charlie belden -- Thursday, 15 May 2008, at 1:05 p.m.
14 messages -- Newest posted Sunday, 25 May 2008, at 2:09 p.m.
OT On line Eyeglasses Cheap Question? -- Barry Irby -- Sunday, 18 May 2008, at 5:08 p.m.
12 messages -- Newest posted Tuesday, 20 May 2008, at 7:57 p.m.
Which Elm is it? -- Greg Haugen -- Sunday, 18 May 2008, at 6:10 p.m.
5 messages -- Newest posted Monday, 19 May 2008, at 5:34 p.m.
Quicker handling skew? *PIC* -- Keith Tompkins -- Sunday, 18 May 2008, at 6:14 p.m.
13 messages -- Newest posted Tuesday, 20 May 2008, at 3:35 p.m.
Jamie Donaldson in print again -- Dennis Yoder -- Sunday, 18 May 2008, at 9:21 p.m.
4 messages -- Newest posted Monday, 19 May 2008, at 11:00 a.m.
Game of "Who Made It?" *PIC* -- charlie belden -- Monday, 19 May 2008, at 2:59 a.m.
6 messages -- Newest posted Monday, 19 May 2008, at 6:39 p.m.
Slightly OT: Anvil Follow-up *PIC* -- steve antonucci -- Monday, 19 May 2008, at 8:35 a.m.
5 messages -- Newest posted Monday, 19 May 2008, at 11:08 a.m.
Ron Sardo's Gift Box *PIC* -- Mike Stafford -- Monday, 19 May 2008, at 12:25 p.m.
11 messages -- Newest posted Tuesday, 20 May 2008, at 8:45 a.m.
Q: Danish/Linseed oils... -- Mark Williamson -- Monday, 19 May 2008, at 1:26 p.m.
24 messages -- Newest posted Wednesday, 21 May 2008, at 12:17 p.m.
Woodworker's Supply sale -- Dick Coers -- Monday, 19 May 2008, at 4:39 p.m.
2 messages -- Newest posted Tuesday, 20 May 2008, at 12:21 a.m.
Finishing maple flooring -- RK in Milwaukee------WebKitFormBoundary3KibZ+vaXCy -- Monday, 19 May 2008, at 7:43 p.m.
5 messages -- Newest posted Tuesday, 20 May 2008, at 2:13 a.m.
*** SURVEY: THE IDES OF MAY +5 *** -- Ellis Walentine -- Tuesday, 20 May 2008, at 11:21 a.m.
7 messages -- Newest posted Wednesday, 21 May 2008, at 9:50 a.m.
flower and stem mirror *PIC* -- john lucas -- Tuesday, 20 May 2008, at 12:55 p.m.
9 messages -- Newest posted Tuesday, 20 May 2008, at 9:44 p.m.
Thanks for your help--here's what I did *LINK* -- Joanne Adler in Pt. Pleasant, PA -- Tuesday, 20 May 2008, at 10:03 p.m.
6 messages -- Newest posted Wednesday, 21 May 2008, at 10:37 a.m.
Game #3- Who Made It? *PIC* -- Mike Stafford -- Wednesday, 21 May 2008, at 10:55 a.m.
8 messages -- Newest posted Thursday, 22 May 2008, at 1:30 p.m.
Name that turner-game#4 Here is... *PIC* -- Jamie Donaldson -- Wednesday, 21 May 2008, at 4:08 p.m.
26 messages -- Newest posted Tuesday, 27 May 2008, at 10:46 a.m.
Trucking Companies (OT) -- Mike Cunningham -- Wednesday, 21 May 2008, at 6:03 p.m.
9 messages -- Newest posted Wednesday, 21 May 2008, at 11:00 p.m.
OT, Video Camera -- Dave Peebles Lyons, Ohio! -- Wednesday, 21 May 2008, at 11:37 p.m.
11 messages -- Newest posted Friday, 23 May 2008, at 7:25 p.m.
chain saw *LINK* -- Don at Central Illinois -- Thursday, 22 May 2008, at 12:09 p.m.
3 messages -- Newest posted Friday, 23 May 2008, at 12:13 a.m.
Going To Richmond?? -- Mark Mandell - Gone Round In Jersey -- Thursday, 22 May 2008, at 4:03 p.m.
23 messages -- Newest posted Friday, 23 May 2008, at 4:39 p.m.
Banksia box *PIC* -- john lucas -- Thursday, 22 May 2008, at 4:08 p.m.
11 messages -- Newest posted Thursday, 22 May 2008, at 9:39 p.m.
Favorite Wood.... -- Wally Dickerman in Arizona -- Thursday, 22 May 2008, at 5:39 p.m.
33 messages -- Newest posted Saturday, 24 May 2008, at 6:40 a.m.
shop made disc sander -- Tom Libby -- Thursday, 22 May 2008, at 7:18 p.m.
2 messages -- Newest posted Friday, 23 May 2008, at 8:22 a.m.
Who Made It Game 4 *PIC* -- Barbara Gill, Remlik VA -- Thursday, 22 May 2008, at 9:20 p.m.
6 messages -- Newest posted Friday, 23 May 2008, at 5:02 a.m.
Koa lidded jar... *PIC* -- Mike Stafford -- Thursday, 22 May 2008, at 9:58 p.m.
6 messages -- Newest posted Saturday, 24 May 2008, at 12:02 a.m.
A BIG cherry tree *PIC* -- Keith Tompkins -- Thursday, 22 May 2008, at 10:11 p.m.
3 messages -- Newest posted Friday, 23 May 2008, at 10:22 a.m.
Who Made It?...Game 5 *PIC* -- Wally Dickerman in Arizona -- Thursday, 22 May 2008, at 11:16 p.m.
5 messages -- Newest posted Friday, 23 May 2008, at 6:16 a.m.
Who Made It Game suggestion -- charlie belden -- Friday, 23 May 2008, at 2:02 a.m.
8 messages -- Newest posted Saturday, 24 May 2008, at 12:47 p.m.
Powered Respirators Question. -- Robert R. Clough - Tthorncraft -- Friday, 23 May 2008, at 4:38 p.m.
6 messages -- Newest posted Saturday, 24 May 2008, at 3:30 a.m.
Name tha turner game #* *PIC* -- Bill Noce - Jefferson, Ohio -- Friday, 23 May 2008, at 4:50 p.m.
4 messages -- Newest posted Saturday, 24 May 2008, at 4:14 p.m.
Alert: Big Virus Coming *LINK* -- Sam -- Friday, 23 May 2008, at 7:42 p.m.
7 messages -- Newest posted Tuesday, 27 May 2008, at 2:43 p.m.
Who made it #9 *PIC* -- Carole Valentine -- Friday, 23 May 2008, at 10:42 p.m.
12 messages -- Newest posted Sunday, 25 May 2008, at 10:24 a.m.
Nova 1624 "review" -- steve antonucci -- Saturday, 24 May 2008, at 9:06 a.m.
3 messages -- Newest posted Saturday, 24 May 2008, at 11:25 a.m.
Who Made It?...Game 10... *PIC* -- Wally Dickerman in Arizona -- Saturday, 24 May 2008, at 12:24 p.m.
11 messages -- Newest posted Sunday, 25 May 2008, at 10:05 a.m.
My skew is jealous of my threader -- john lucas -- Saturday, 24 May 2008, at 7:47 p.m.
4 messages -- Newest posted Sunday, 25 May 2008, at 7:42 a.m.
Beginning turner text *LINK* -- Jim Barbour -- Saturday, 24 May 2008, at 9:03 p.m.
3 messages -- Newest posted Sunday, 25 May 2008, at 10:02 a.m.
How long does it take to dry chunks? -- Joe Pack -- Sunday, 25 May 2008, at 1:18 a.m.
35 messages -- Newest posted Monday, 26 May 2008, at 10:01 a.m.
Lessons from my first "class" -- steve antonucci -- Sunday, 25 May 2008, at 7:25 a.m.
13 messages -- Newest posted Sunday, 25 May 2008, at 9:15 p.m.
food safe woods -- woody in vt -- Sunday, 25 May 2008, at 10:16 a.m.
8 messages -- Newest posted Sunday, 25 May 2008, at 8:59 p.m.
Pen Blanks -- Ken Oakley-Sunny St. Cloud, Fla -- Sunday, 25 May 2008, at 1:25 p.m.
1 message
Drying blocks *PIC* -- Jim King -- Sunday, 25 May 2008, at 1:38 p.m.
1 message
Cracked bowl question -- Ron McKinley -- Sunday, 25 May 2008, at 2:13 p.m.
14 messages -- Newest posted Monday, 26 May 2008, at 11:43 a.m.
Wolverine Essential Upgrade! *PIC* -- Jerry Hall -- Sunday, 25 May 2008, at 5:06 p.m.
10 messages -- Newest posted Thursday, 29 May 2008, at 10:04 a.m.
PM 3520a Problems -- RPE -- Sunday, 25 May 2008, at 11:00 p.m.
14 messages -- Newest posted Wednesday, 18 June 2008, at 3:00 p.m.
Eagle Cane Project -- GaryG in MD -- Monday, 26 May 2008, at 1:22 a.m.
3 messages -- Newest posted Monday, 26 May 2008, at 11:44 a.m.
Compression Ring -- Nick Tuzzolino -- Monday, 26 May 2008, at 12:38 p.m.
2 messages -- Newest posted Monday, 26 May 2008, at 12:42 p.m.
Boooo, Hisssss, (from AP, Sat. 24, '08) -- Mike Jones, Redding, CA -- Monday, 26 May 2008, at 4:47 p.m.
6 messages -- Newest posted Tuesday, 27 May 2008, at 8:42 a.m.
Thank you/newel pics *PIC* -- Bill Sams -- Monday, 26 May 2008, at 7:18 p.m.
7 messages -- Newest posted Wednesday, 28 May 2008, at 8:48 a.m.
Question, Re: Club Programming -- E.T. -- Tuesday, 27 May 2008, at 12:30 a.m.
13 messages -- Newest posted Sunday, 1 June 2008, at 5:34 p.m.
Beaded Santos rosewood box... *PIC* -- Mike Stafford -- Tuesday, 27 May 2008, at 1:17 p.m.
13 messages -- Newest posted Wednesday, 28 May 2008, at 5:58 a.m.
OT Web Page Access -- Stuart Johnson -- Tuesday, 27 May 2008, at 2:58 p.m.
5 messages -- Newest posted Tuesday, 27 May 2008, at 9:51 p.m.
hollowing tools -- Andrew Lunn -- Tuesday, 27 May 2008, at 4:21 p.m.
16 messages -- Newest posted Thursday, 29 May 2008, at 2:11 p.m.
Off center, dyed and limed bowl *PIC* -- keith zimmerman, Normal IL -- Tuesday, 27 May 2008, at 4:58 p.m.
11 messages -- Newest posted Thursday, 29 May 2008, at 3:45 p.m.
Find Mike's drawing... *PIC* -- Molly Winton -- Tuesday, 27 May 2008, at 6:52 p.m.
12 messages -- Newest posted Wednesday, 28 May 2008, at 1:43 p.m.
Drum brake lathes? -- ThomD -- Wednesday, 28 May 2008, at 4:25 p.m.
4 messages -- Newest posted Wednesday, 28 May 2008, at 11:07 p.m.
Who turned it #11 *PIC* -- Dick Hines -- Wednesday, 28 May 2008, at 8:57 p.m.
10 messages -- Newest posted Thursday, 29 May 2008, at 3:55 p.m.
I was accepted ! -- Don Orr -- Thursday, 29 May 2008, at 8:23 a.m.
12 messages -- Newest posted Thursday, 29 May 2008, at 3:41 p.m.
Jet 1220vs -- john lucas -- Thursday, 29 May 2008, at 10:37 a.m.
4 messages -- Newest posted Thursday, 29 May 2008, at 6:09 p.m.
Problem with HFreight lathe -- ILYA ZAVORIN -- Thursday, 29 May 2008, at 12:34 p.m.
8 messages -- Newest posted Friday, 30 May 2008, at 3:35 p.m.
OT: "Flat" work with some turning *PIC* -- steve antonucci -- Thursday, 29 May 2008, at 4:01 p.m.
4 messages -- Newest posted Friday, 30 May 2008, at 1:59 p.m.
Oneway 24113 -- Peter Teubel -- Thursday, 29 May 2008, at 10:44 p.m.
7 messages -- Newest posted Friday, 30 May 2008, at 11:17 a.m.
Jet 1642 Remote Switch Issue -- Scott Hurley in N. VA -- Thursday, 29 May 2008, at 11:54 p.m.
5 messages -- Newest posted Friday, 30 May 2008, at 4:47 p.m.
Vacuum Pump from Refrigerator Parts -- Brian McKearney -- Friday, 30 May 2008, at 7:14 a.m.
3 messages -- Newest posted Friday, 30 May 2008, at 2:52 p.m.
Who turned It Game 12 *PIC* -- Barbara Gill, Remlik VA -- Friday, 30 May 2008, at 10:11 a.m.
13 messages -- Newest posted Saturday, 31 May 2008, at 2:34 p.m.
Who Turned It Game 13...... *PIC* -- Wally Dickerman in Arizona -- Friday, 30 May 2008, at 12:18 p.m.
8 messages -- Newest posted Sunday, 1 June 2008, at 2:27 a.m.
Richmond? -- Mark Mandell - Gone Round In Jersey -- Friday, 30 May 2008, at 7:16 p.m.
23 messages -- Newest posted Wednesday, 4 June 2008, at 8:19 p.m.
Both for crafts fair -- Jorge Castaneda~Downeast Maine -- Friday, 30 May 2008, at 8:04 p.m.
20 messages -- Newest posted Tuesday, 3 June 2008, at 7:21 p.m.