Re: Hotdog Compressor - Increasing Capacity -- Mark Mandell - Gone Round In Jersey -- Saturday, 15 March 2008, at 1:21 p.m.
6 messages -- Newest posted Saturday, 15 March 2008, at 10:56 p.m.
WAY OT -front load laundry machines -- Tom Sweeney - Coatesville, PA -- Saturday, 15 March 2008, at 3:59 p.m.
22 messages -- Newest posted Monday, 17 March 2008, at 1:46 p.m.
Egg removal (OT) -- John D. Luke -- Saturday, 15 March 2008, at 10:55 p.m.
7 messages -- Newest posted Monday, 17 March 2008, at 12:38 p.m.
Thanks Mark! *NM* -- Terry Quiram -- Saturday, 15 March 2008, at 11:10 p.m.
1 message
pocket-hole jig trouble on this project -- Cody Lewis in Las Vegas -- Saturday, 15 March 2008, at 11:12 p.m.
5 messages -- Newest posted Monday, 17 March 2008, at 9:47 a.m.
OT - Hard drive crash? -- Pat Evans -- Sunday, 16 March 2008, at 6:16 a.m.
6 messages -- Newest posted Monday, 17 March 2008, at 7:10 p.m.
***From the Cockpit: New Look*** -- Ellis Walentine -- Sunday, 16 March 2008, at 11:51 a.m.
28 messages -- Newest posted Monday, 17 March 2008, at 3:29 p.m.
Is IPE Toxic? -- Jim Orasky -- Sunday, 16 March 2008, at 1:09 p.m.
5 messages -- Newest posted Tuesday, 18 March 2008, at 5:59 p.m.
Re: Sorry I asked -- Wiley Rutledge -- Sunday, 16 March 2008, at 8:36 p.m.
1 message
John Renzetti, are you home yet? -- Joe Shelton -- Sunday, 16 March 2008, at 8:38 p.m.
2 messages -- Newest posted Tuesday, 18 March 2008, at 9:08 a.m.
WC Weekend Accomplishments..... -- Dennis E Peacock -- Monday, 17 March 2008, at 7:32 a.m.
12 messages -- Newest posted Monday, 17 March 2008, at 10:27 p.m.
Mortising Machine. Magazine Reviews? -- Joe in a Cleveland suburb -- Monday, 17 March 2008, at 8:35 a.m.
10 messages -- Newest posted Wednesday, 19 March 2008, at 12:40 p.m.
Table top glue up wisdom sought -- Pete in Holland, MI -- Monday, 17 March 2008, at 10:02 a.m.
10 messages -- Newest posted Monday, 17 March 2008, at 9:59 p.m.
Re: Congratulations Colonel! -- Larry Clinton At Frankfort (Central)., Indiana -- Monday, 17 March 2008, at 11:31 a.m.
1 message
OT - NEMA 6-50P plug - Wire ga.? -- Terry Alexander -- Monday, 17 March 2008, at 1:36 p.m.
7 messages -- Newest posted Tuesday, 18 March 2008, at 12:21 p.m.
Re: super quality brushes *LINK* -- Ken Garlock, Collin County Texas -- Monday, 17 March 2008, at 4:21 p.m.
2 messages -- Newest posted Monday, 17 March 2008, at 6:20 p.m.
Patina *PIC* -- Mike Schwing from Maryland -- Monday, 17 March 2008, at 5:35 p.m.
18 messages -- Newest posted Wednesday, 19 March 2008, at 10:59 a.m.
OT - PVC freezing/breakage -- Joe Pack -- Monday, 17 March 2008, at 7:30 p.m.
7 messages -- Newest posted Tuesday, 18 March 2008, at 9:25 p.m.
Care for Mangrove wood carving -- Keith Melcher -- Tuesday, 18 March 2008, at 9:33 a.m.
2 messages -- Newest posted Tuesday, 18 March 2008, at 10:10 a.m.
Ductwork installation -- NickB -- Tuesday, 18 March 2008, at 12:29 p.m.
4 messages -- Newest posted Tuesday, 18 March 2008, at 4:37 p.m.
Epoxy Fills - Turning -- Steven Reznek -- Tuesday, 18 March 2008, at 12:32 p.m.
4 messages -- Newest posted Thursday, 20 March 2008, at 11:55 a.m.
***Two New Video Reviews*** *LINK* -- Ellis Walentine -- Tuesday, 18 March 2008, at 1:47 p.m.
9 messages -- Newest posted Thursday, 20 March 2008, at 10:11 p.m.
On/Off switch source -- Mac in Indy -- Tuesday, 18 March 2008, at 4:06 p.m.
7 messages -- Newest posted Tuesday, 18 March 2008, at 6:13 p.m.
Brushes to seal a contractor-style saw - long -- Al Stokka - Cambridge, Iowa -- Tuesday, 18 March 2008, at 5:34 p.m.
9 messages -- Newest posted Wednesday, 19 March 2008, at 8:30 p.m.
China trip -- Ted Owen, Pittsburgh -- Tuesday, 18 March 2008, at 7:54 p.m.
6 messages -- Newest posted Wednesday, 19 March 2008, at 11:03 p.m.
OT Brokerage Accounts and Investments -- Dustmaker Mike -- Tuesday, 18 March 2008, at 8:26 p.m.
13 messages -- Newest posted Wednesday, 19 March 2008, at 5:35 p.m.
Padding Shellac -- Howard M -- Tuesday, 18 March 2008, at 10:31 p.m.
4 messages -- Newest posted Wednesday, 19 March 2008, at 5:34 p.m.
OT-Gluing tape measure to floor -- Nick in St. Louis -- Tuesday, 18 March 2008, at 10:53 p.m.
6 messages -- Newest posted Wednesday, 19 March 2008, at 9:05 p.m.
Rain -- JohnD -- Wednesday, 19 March 2008, at 7:19 a.m.
11 messages -- Newest posted Thursday, 20 March 2008, at 7:11 a.m.
Re: Hotdog Compressor - Increasing Capacity -- Larry Clinton At Frankfort (Central)., Indiana -- Wednesday, 19 March 2008, at 9:43 a.m.
2 messages -- Newest posted Wednesday, 19 March 2008, at 10:08 p.m.
Running air lines in shop -- Terry Alexander -- Wednesday, 19 March 2008, at 9:55 a.m.
12 messages -- Newest posted Wednesday, 19 March 2008, at 10:01 p.m.
fibromyalgia -- Ernie Miller -- Wednesday, 19 March 2008, at 9:59 a.m.
20 messages -- Newest posted Saturday, 22 March 2008, at 6:10 p.m.
OT PVC fitting removal -- tom norton -- Wednesday, 19 March 2008, at 12:25 p.m.
8 messages -- Newest posted Wednesday, 19 March 2008, at 9:35 p.m.
Getting new saw in the shop? -- RickS -- Wednesday, 19 March 2008, at 12:43 p.m.
7 messages -- Newest posted Wednesday, 19 March 2008, at 4:11 p.m.
Did The Profiles page Disappear? -- Alan Young -- Wednesday, 19 March 2008, at 2:01 p.m.
5 messages -- Newest posted Thursday, 20 March 2008, at 5:54 a.m.
John Renzetti back from Kuwait -- George@Colonel's Workshop-Havertown PA -- Wednesday, 19 March 2008, at 3:09 p.m.
14 messages -- Newest posted Friday, 21 March 2008, at 11:19 p.m.
Need quick help. -- Dean Lapinel -- Wednesday, 19 March 2008, at 3:37 p.m.
2 messages -- Newest posted Thursday, 20 March 2008, at 7:36 p.m.
general purpose blade(s) for bandsaw -- Andy in Raleigh -- Wednesday, 19 March 2008, at 3:54 p.m.
12 messages -- Newest posted Thursday, 20 March 2008, at 11:32 a.m.
Reminder software -- Malcolm Timbers -- Wednesday, 19 March 2008, at 5:17 p.m.
10 messages -- Newest posted Thursday, 20 March 2008, at 11:13 p.m.
Bench Vise side vise -- Wayne -- Wednesday, 19 March 2008, at 10:27 p.m.
3 messages -- Newest posted Thursday, 20 March 2008, at 3:44 p.m.
moldy wood -- David -- Wednesday, 19 March 2008, at 10:31 p.m.
7 messages -- Newest posted Friday, 21 March 2008, at 6:25 a.m.
Ellis started loosing messages -- Wayne -- Wednesday, 19 March 2008, at 10:43 p.m.
20 messages -- Newest posted Thursday, 20 March 2008, at 2:41 p.m.
I'm Such A Lucky Guy,,, -- Rick Jackson,TN -- Thursday, 20 March 2008, at 7:58 a.m.
1 message
Steel City mortising machine -- Joe in a Cleveland suburb -- Thursday, 20 March 2008, at 8:12 a.m.
4 messages -- Newest posted Thursday, 20 March 2008, at 4:15 p.m.
***SURVEY: THE IDES OF MARCH*** -- Ellis -- Thursday, 20 March 2008, at 8:24 a.m.
18 messages -- Newest posted Sunday, 30 March 2008, at 1:20 p.m.
OT: A Bit of Easter Trivia -- Mike Circ -- Thursday, 20 March 2008, at 8:42 a.m.
10 messages -- Newest posted Thursday, 20 March 2008, at 4:02 p.m.
problems with a tung oil finish -- Glenn -- Thursday, 20 March 2008, at 9:51 a.m.
7 messages -- Newest posted Sunday, 23 March 2008, at 3:20 p.m.
OT, robotics, amazing *LINK* -- John K Jordan -- Thursday, 20 March 2008, at 11:14 a.m.
11 messages -- Newest posted Thursday, 20 March 2008, at 10:47 p.m.
Router plane *PIC* -- tek-Brunswick, Ohio -- Thursday, 20 March 2008, at 11:44 a.m.
4 messages -- Newest posted Thursday, 20 March 2008, at 12:23 p.m.
Tool Gloat !!! -- Patrick Schupbach -- Thursday, 20 March 2008, at 1:33 p.m.
3 messages -- Newest posted Thursday, 20 March 2008, at 7:43 p.m.
SealCoat -- Dick H -- Thursday, 20 March 2008, at 2:40 p.m.
2 messages -- Newest posted Thursday, 20 March 2008, at 5:02 p.m.
OT - computer woes -- Carol - now in NC Nebraska -- Thursday, 20 March 2008, at 3:39 p.m.
13 messages -- Newest posted Friday, 21 March 2008, at 6:46 a.m.
Had I Given Up Beer for Lent -- George@Colonel's Workshop-Havertown PA -- Thursday, 20 March 2008, at 5:18 p.m.
4 messages -- Newest posted Friday, 21 March 2008, at 12:04 p.m.
OT How do you run Vista in XP Mode? -- Barry Irby -- Thursday, 20 March 2008, at 6:49 p.m.
2 messages -- Newest posted Thursday, 20 March 2008, at 7:03 p.m.
Plywood VS the dovetail. -- ken raddon -- Thursday, 20 March 2008, at 7:55 p.m.
12 messages -- Newest posted Friday, 21 March 2008, at 6:59 p.m.
OT; Hotel near JFK Airport -- Nick Tuzzolino -- Thursday, 20 March 2008, at 9:09 p.m.
2 messages -- Newest posted Friday, 28 March 2008, at 9:26 a.m.
Dual drum vs. open ended sanders -- Ken Miller -- Thursday, 20 March 2008, at 9:42 p.m.
2 messages -- Newest posted Friday, 21 March 2008, at 12:16 a.m.
French Walnut -- Howard in Bethesda -- Thursday, 20 March 2008, at 10:38 p.m.
3 messages -- Newest posted Friday, 21 March 2008, at 9:55 p.m.
cast iron and fire -- DizD -- Thursday, 20 March 2008, at 11:08 p.m.
3 messages -- Newest posted Friday, 21 March 2008, at 11:32 a.m.
OT - GPS (not navigation!) -- Doug Ring -- Thursday, 20 March 2008, at 11:12 p.m.
5 messages -- Newest posted Friday, 21 March 2008, at 6:37 p.m.
right angle/close quarters drill.... -- Ray Newman -- Thursday, 20 March 2008, at 11:37 p.m.
16 messages -- Newest posted Sunday, 23 March 2008, at 9:16 p.m.
OT: Good morning from the back porch *LINK* -- Mike Schwing from Maryland -- Friday, 21 March 2008, at 7:56 a.m.
5 messages -- Newest posted Friday, 21 March 2008, at 8:19 p.m.
New Omnijig info -- Dan Manturi -- Friday, 21 March 2008, at 8:52 a.m.
11 messages -- Newest posted Sunday, 23 March 2008, at 3:23 p.m.
wood-met services -- mike petro -- Friday, 21 March 2008, at 11:08 a.m.
3 messages -- Newest posted Friday, 21 March 2008, at 10:17 p.m.
Travel with tools -- Doug Reynolds in Seattle -- Friday, 21 March 2008, at 11:31 a.m.
9 messages -- Newest posted Saturday, 22 March 2008, at 12:38 a.m.
Vacuum Bag Question? -- Barry Irby -- Friday, 21 March 2008, at 12:18 p.m.
3 messages -- Newest posted Friday, 21 March 2008, at 3:02 p.m.
guitar stand *PIC* -- chris Parker -- Friday, 21 March 2008, at 2:51 p.m.
4 messages -- Newest posted Sunday, 23 March 2008, at 4:12 a.m.
Cutting thin strips on table or band saw -- Gary Smyth -- Friday, 21 March 2008, at 3:13 p.m.
18 messages -- Newest posted Saturday, 22 March 2008, at 5:42 p.m.
What is the perfect pad sander? -- Bill Hammond, Oregon Coast -- Friday, 21 March 2008, at 4:07 p.m.
10 messages -- Newest posted Saturday, 22 March 2008, at 12:38 p.m.
Mortising Machine - Another Question... -- Joe in a Cleveland suburb -- Friday, 21 March 2008, at 5:20 p.m.
6 messages -- Newest posted Friday, 21 March 2008, at 7:15 p.m.
Request for help on source of lumber *PIC* -- North of the Border -- Friday, 21 March 2008, at 11:32 p.m.
7 messages -- Newest posted Saturday, 22 March 2008, at 1:36 p.m.
Happy birthday, Denis Chénard. -- Al Stokka - Cambridge, Iowa -- Saturday, 22 March 2008, at 8:47 a.m.
5 messages -- Newest posted Saturday, 22 March 2008, at 8:40 p.m.
Should'a, would'a, could'a . . . *PIC* -- steve mackay -- Saturday, 22 March 2008, at 11:33 a.m.
3 messages -- Newest posted Saturday, 22 March 2008, at 12:50 p.m.
Any good working in Central Illinois? -- Stephen Kirk in Quakertown, PA -- Saturday, 22 March 2008, at 1:38 p.m.
4 messages -- Newest posted Saturday, 22 March 2008, at 8:53 p.m.
Look what followed me home *PIC* -- Ned Bulken -- Saturday, 22 March 2008, at 1:58 p.m.
6 messages -- Newest posted Saturday, 22 March 2008, at 4:45 p.m.
stacked dado -- woodenleg -- Saturday, 22 March 2008, at 2:05 p.m.
3 messages -- Newest posted Saturday, 22 March 2008, at 5:18 p.m.
PHEEEEEEEW (Pic) *PIC* -- Bill Pfahl in Virginia -- Saturday, 22 March 2008, at 4:29 p.m.
7 messages -- Newest posted Sunday, 23 March 2008, at 7:50 a.m.
Did you know Woodsmith on PBS -- North of the Border -- Saturday, 22 March 2008, at 5:29 p.m.
7 messages -- Newest posted Monday, 24 March 2008, at 12:24 a.m.
The mini demilune table is Done! *NM* *PIC* -- Bob Entwisle in NJ -- Saturday, 22 March 2008, at 5:49 p.m.
14 messages -- Newest posted Sunday, 23 March 2008, at 10:26 p.m.
Makita 1/4 sheet pad sanders -- Bill Hammond, Oregon Coast -- Saturday, 22 March 2008, at 7:05 p.m.
5 messages -- Newest posted Sunday, 23 March 2008, at 6:31 p.m.
OT: DIY pest control -- John_in_Az -- Saturday, 22 March 2008, at 7:22 p.m.
16 messages -- Newest posted Monday, 24 March 2008, at 2:37 p.m.
Did dealer sell me a USED jointer?!? -- Dan Mitchell -- Saturday, 22 March 2008, at 7:29 p.m.
36 messages -- Newest posted Wednesday, 23 April 2008, at 7:06 p.m.
Input on some 2nd hand jointers -- Dan Mitchell -- Saturday, 22 March 2008, at 11:20 p.m.
8 messages -- Newest posted Monday, 24 March 2008, at 11:31 p.m.
Mortising machine question -- Joe in a Cleveland suburb -- Saturday, 22 March 2008, at 11:37 p.m.
3 messages -- Newest posted Sunday, 23 March 2008, at 9:46 a.m.
"Sightings" Lake Matamuskeet -- Alan in Little Washington (NC) -- Sunday, 23 March 2008, at 12:03 a.m.
1 message
new old planer *PIC* -- jared -- Sunday, 23 March 2008, at 8:04 a.m.
9 messages -- Newest posted Sunday, 23 March 2008, at 8:39 p.m.
Morning All Happy Easter -- Dustmaker Mike -- Sunday, 23 March 2008, at 8:09 a.m.
2 messages -- Newest posted Sunday, 23 March 2008, at 8:39 a.m.
for Carol -- Chuck W -- Sunday, 23 March 2008, at 8:46 a.m.
2 messages -- Newest posted Sunday, 23 March 2008, at 3:09 p.m.
O.T.: Bruised shingles question -- David G. Sparks -- Sunday, 23 March 2008, at 9:28 a.m.
7 messages -- Newest posted Monday, 24 March 2008, at 7:04 a.m.
Liturgical Pieces -- Alan Young -- Sunday, 23 March 2008, at 9:34 a.m.
5 messages -- Newest posted Monday, 24 March 2008, at 12:38 p.m.
How to re-flatten a panel -- Bart Goldberg -- Sunday, 23 March 2008, at 3:31 p.m.
8 messages -- Newest posted Monday, 24 March 2008, at 12:28 a.m.
OT Ants in my pants -- Dustmaker Mike -- Sunday, 23 March 2008, at 5:54 p.m.
14 messages -- Newest posted Monday, 24 March 2008, at 10:57 a.m.
Woodsmith program -- Larry in NW Ohio -- Sunday, 23 March 2008, at 6:32 p.m.
5 messages -- Newest posted Monday, 24 March 2008, at 9:14 a.m.
Old Craftsman model look-ups -- Mike Jones, Redding, CA -- Sunday, 23 March 2008, at 6:45 p.m.
3 messages -- Newest posted Sunday, 23 March 2008, at 11:42 p.m.
OT-- website hosting -- Gary Evans Tallassee, TN -- Sunday, 23 March 2008, at 9:38 p.m.
7 messages -- Newest posted Tuesday, 25 March 2008, at 5:15 p.m.
variable speed motor ??? -- Wayne Carson -- Sunday, 23 March 2008, at 9:39 p.m.
3 messages -- Newest posted Monday, 24 March 2008, at 10:32 a.m.
Re: Bah - humbug -- Larry Clinton At Frankfort (Central)., Indiana -- Monday, 24 March 2008, at 9:13 a.m.
16 messages -- Newest posted Thursday, 27 March 2008, at 7:01 a.m.
WC Weekend Accomplishments..... -- Dennis E. Peacock -- Monday, 24 March 2008, at 9:19 a.m.
9 messages -- Newest posted Tuesday, 25 March 2008, at 10:31 a.m.
Resharpening brad point drills? -- wilbur -- Monday, 24 March 2008, at 9:30 a.m.
2 messages -- Newest posted Monday, 24 March 2008, at 11:14 a.m.
help widow determine tool values? -- MN deepwoods (Dave) -- Monday, 24 March 2008, at 3:41 p.m.
8 messages -- Newest posted Tuesday, 25 March 2008, at 3:35 a.m.
SawStop - - field feedback ? ? -- Pete in Holland, MI -- Monday, 24 March 2008, at 3:52 p.m.
57 messages -- Newest posted Friday, 28 March 2008, at 10:36 a.m.
Cutting steel with band saw ?? -- Wayne Carson "TX" -- Monday, 24 March 2008, at 3:57 p.m.
9 messages -- Newest posted Tuesday, 25 March 2008, at 10:47 p.m.
Fibonacci gauge -- Joseph Mulherin, Sr. -- Monday, 24 March 2008, at 9:46 p.m.
7 messages -- Newest posted Tuesday, 25 March 2008, at 1:10 p.m.
GRINDINGER!!!! -- Eddie Pacheco; San Jose, Ca. -- Monday, 24 March 2008, at 10:26 p.m.
2 messages -- Newest posted Tuesday, 25 March 2008, at 3:25 p.m.
Sightings Gallery? -- Jennifer@Indy.USA -- Monday, 24 March 2008, at 10:36 p.m.
3 messages -- Newest posted Tuesday, 25 March 2008, at 11:36 a.m.
New Woodturner -- JK -- Monday, 24 March 2008, at 10:47 p.m.
6 messages -- Newest posted Tuesday, 25 March 2008, at 8:16 a.m.
Basic jointer question -- Dan Mitchell -- Tuesday, 25 March 2008, at 3:13 a.m.
13 messages -- Newest posted Wednesday, 26 March 2008, at 2:19 p.m.
What size planer -- Josh in VA -- Tuesday, 25 March 2008, at 6:14 a.m.
5 messages -- Newest posted Wednesday, 26 March 2008, at 12:38 a.m.
Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 25 March 2008, at 7:11 a.m.
1 message
100 amp to 200 amp -- Mitch from Canada -- Tuesday, 25 March 2008, at 12:03 p.m.
9 messages -- Newest posted Wednesday, 26 March 2008, at 1:53 p.m.
Re: FWW needs a basement shop -- Joe in a Cleveland Suburb -- Tuesday, 25 March 2008, at 12:38 p.m.
3 messages -- Newest posted Tuesday, 25 March 2008, at 3:28 p.m.
12v wiring -- Allen Bryant - Bumpass, VA -- Tuesday, 25 March 2008, at 3:27 p.m.
9 messages -- Newest posted Wednesday, 26 March 2008, at 11:13 a.m.
shop progress *PIC* -- Clay Foster -- Tuesday, 25 March 2008, at 3:39 p.m.
26 messages -- Newest posted Wednesday, 26 March 2008, at 11:33 p.m.
Re: table saw accident -- Larry Sparks -- Tuesday, 25 March 2008, at 4:05 p.m.
1 message
Zinsser SealCoat -- John Pappas -- Tuesday, 25 March 2008, at 6:19 p.m.
19 messages -- Newest posted Thursday, 8 May 2008, at 3:16 p.m.
forrest blade sharpening -- Eric in Los Gatos -- Tuesday, 25 March 2008, at 6:34 p.m.
23 messages -- Newest posted Wednesday, 26 March 2008, at 3:03 p.m.
Re: table saw accident -- Paul Diemer -- Tuesday, 25 March 2008, at 9:03 p.m.
5 messages -- Newest posted Thursday, 27 March 2008, at 9:48 a.m.
OT Check Scam Question? -- Barry Irby -- Tuesday, 25 March 2008, at 9:27 p.m.
10 messages -- Newest posted Thursday, 27 March 2008, at 8:54 p.m.
Low Tack Double Sided Masking Tape -- Howard in Bethesda -- Tuesday, 25 March 2008, at 10:34 p.m.
9 messages -- Newest posted Wednesday, 26 March 2008, at 9:49 p.m.
Flower Inlay Help Needed *PIC* -- Ken Bellock (Houston, TX) -- Wednesday, 26 March 2008, at 10:18 a.m.
14 messages -- Newest posted Friday, 28 March 2008, at 8:50 a.m.
Milwaukee battery recall *LINK* -- Grant Smith -- Wednesday, 26 March 2008, at 10:50 a.m.
6 messages -- Newest posted Wednesday, 26 March 2008, at 3:52 p.m.
Passing of a friend *PIC* -- Allen Bryant - Bumpass, VA -- Wednesday, 26 March 2008, at 11:59 a.m.
17 messages -- Newest posted Thursday, 27 March 2008, at 9:55 p.m.
OT Cleaning HP printheads -- Barry Irby -- Wednesday, 26 March 2008, at 4:40 p.m.
5 messages -- Newest posted Thursday, 27 March 2008, at 11:40 p.m.
Bowed lumber -- Larry in NW Ohio -- Wednesday, 26 March 2008, at 6:51 p.m.
16 messages -- Newest posted Friday, 28 March 2008, at 6:38 p.m.
OT: Removing wooden siding *PIC* -- Dan Mitchell -- Wednesday, 26 March 2008, at 7:02 p.m.
13 messages -- Newest posted Friday, 28 March 2008, at 12:29 a.m.
Re: 1st class mistake -- Max Greenberg -- Thursday, 27 March 2008, at 12:53 a.m.
3 messages -- Newest posted Thursday, 27 March 2008, at 8:41 a.m.
Think before you type (Long) -- Dustmaker Mike -- Thursday, 27 March 2008, at 7:56 a.m.
6 messages -- Newest posted Friday, 28 March 2008, at 12:39 p.m.
OT Common Rules (Funny to me) -- Dustmaker Mike -- Thursday, 27 March 2008, at 10:55 a.m.
5 messages -- Newest posted Friday, 28 March 2008, at 12:38 a.m.
Wooden plaques for painting? -- JL -- Thursday, 27 March 2008, at 1:10 p.m.
11 messages -- Newest posted Friday, 28 March 2008, at 5:00 p.m.
Delta 46-450 Lathe -- Jerry Bub -- Thursday, 27 March 2008, at 3:30 p.m.
1 message
OT-Intuit Turbo Tax contact -- Al Stokka - Cambridge, Iowa -- Thursday, 27 March 2008, at 5:41 p.m.
7 messages -- Newest posted Saturday, 29 March 2008, at 6:13 p.m.
I Totally Agree! -- Tom MacGregor -- Thursday, 27 March 2008, at 6:36 p.m.
1 message
I want to build a dollhouse. -- ken raddon -- Thursday, 27 March 2008, at 7:21 p.m.
9 messages -- Newest posted Saturday, 29 March 2008, at 9:13 a.m.
DeWalt 618 problem -- Earl -- Thursday, 27 March 2008, at 7:34 p.m.
3 messages -- Newest posted Thursday, 27 March 2008, at 8:51 p.m.
TS kick back question? -- Barry Irby -- Thursday, 27 March 2008, at 8:16 p.m.
15 messages -- Newest posted Sunday, 30 March 2008, at 1:03 a.m.
NEW Shop Shot -- David Yoho -- Thursday, 27 March 2008, at 8:22 p.m.
3 messages -- Newest posted Saturday, 29 March 2008, at 4:56 a.m.
cookies - chocolat chip *NM* -- Robert R clough - Thorncraft -- Thursday, 27 March 2008, at 8:58 p.m.
2 messages -- Newest posted Thursday, 27 March 2008, at 9:17 p.m.
working with MDO -- Carol - now in NC Nebraska -- Thursday, 27 March 2008, at 10:55 p.m.
12 messages -- Newest posted Friday, 28 March 2008, at 11:59 a.m.
Sprung joints...what gives? -- Stuart Hough -- Friday, 28 March 2008, at 12:54 a.m.
11 messages -- Newest posted Friday, 28 March 2008, at 7:35 p.m.
Safety and the table saw -- Steven R Hardy -- Friday, 28 March 2008, at 7:34 a.m.
4 messages -- Newest posted Friday, 28 March 2008, at 10:05 p.m.
OT Computer Questions -- tom norton -- Friday, 28 March 2008, at 8:48 a.m.
9 messages -- Newest posted Friday, 28 March 2008, at 6:39 p.m.
Festool half sheet sander -- Howard in Bethesda -- Friday, 28 March 2008, at 8:56 a.m.
4 messages -- Newest posted Friday, 28 March 2008, at 1:22 p.m.
! More OT Computer Question -- tom norton -- Friday, 28 March 2008, at 9:21 a.m.
2 messages -- Newest posted Friday, 28 March 2008, at 10:36 a.m.
Dado's in Europe? How do you do it? -- Brian in Brighton -- Friday, 28 March 2008, at 10:24 a.m.
2 messages -- Newest posted Friday, 28 March 2008, at 12:51 p.m.
Finishing A to Z Beyond the books REVIEW -- Mike Galloway -- Friday, 28 March 2008, at 11:00 a.m.
2 messages -- Newest posted Friday, 28 March 2008, at 2:02 p.m.
International Disturbed People's Day (OT) -- Dustmaker Mike -- Friday, 28 March 2008, at 11:04 a.m.
9 messages -- Newest posted Saturday, 29 March 2008, at 10:21 a.m.
OT–Geeky HTML stuff—Freaked out!!! -- Rod Peterson -- Ormond Beach -- Friday, 28 March 2008, at 11:12 a.m.
4 messages -- Newest posted Friday, 28 March 2008, at 2:33 p.m.
Half Messages -- Ken Oakley-Sunny St. Cloud, Fla -- Friday, 28 March 2008, at 11:31 a.m.
3 messages -- Newest posted Friday, 28 March 2008, at 3:08 p.m.
Zinsser Seal Coat Issue Update.... *LINK* -- Tim Greif - West of Chicago -- Friday, 28 March 2008, at 2:42 p.m.
3 messages -- Newest posted Friday, 28 March 2008, at 5:03 p.m.
Ryobi A25RT02 Router Table -- Ty -- Friday, 28 March 2008, at 2:47 p.m.
2 messages -- Newest posted Friday, 28 March 2008, at 3:23 p.m.
ShopTours.org -- Rod Peterson -- Ormond Beach -- Friday, 28 March 2008, at 3:36 p.m.
15 messages -- Newest posted Sunday, 30 March 2008, at 11:17 p.m.
OT Detroit -- tek-Brunswick, Ohio -- Friday, 28 March 2008, at 4:17 p.m.
5 messages -- Newest posted Friday, 28 March 2008, at 10:04 p.m.
OT: GMail -- Hal Langerud -- Friday, 28 March 2008, at 4:56 p.m.
8 messages -- Newest posted Monday, 31 March 2008, at 10:27 a.m.
Shop acs and Swimming Pools (OT) -- Dustmaker Mike -- Friday, 28 March 2008, at 8:04 p.m.
8 messages -- Newest posted Saturday, 29 March 2008, at 9:55 a.m.
Chair Seat Carving -- Paul Leuba -- Friday, 28 March 2008, at 8:17 p.m.
8 messages -- Newest posted Saturday, 29 March 2008, at 9:36 a.m.
Construction safety question -- Larry Marker -- Friday, 28 March 2008, at 11:20 p.m.
5 messages -- Newest posted Saturday, 29 March 2008, at 10:09 p.m.
My Mortise 'Machine' (long w/ pics) -- Joanne Adler in Pt. Pleasant, PA -- Saturday, 29 March 2008, at 10:48 a.m.
13 messages -- Newest posted Monday, 31 March 2008, at 10:22 a.m.
Sorta OT - Cold air return sizes? -- Doug in Denver -- Saturday, 29 March 2008, at 11:39 a.m.
7 messages -- Newest posted Saturday, 29 March 2008, at 10:17 p.m.
Ideas brought to companies -- Chuck in ND -- Saturday, 29 March 2008, at 1:07 p.m.
39 messages -- Newest posted Sunday, 6 April 2008, at 2:00 p.m.
Did a tough thing this afternoon. *PIC* -- Jason Roehl in Lafayette, IN -- Saturday, 29 March 2008, at 3:52 p.m.
13 messages -- Newest posted Monday, 31 March 2008, at 11:10 a.m.
Which planer? -- Dan Mitchell -- Saturday, 29 March 2008, at 7:34 p.m.
5 messages -- Newest posted Monday, 31 March 2008, at 9:40 a.m.
Anybody have Collet Problems on the P+C 690? -- George@Colonel's Workshop-Havertown PA -- Saturday, 29 March 2008, at 8:05 p.m.
11 messages -- Newest posted Sunday, 30 March 2008, at 4:07 p.m.
Need help identifying wood, please -- Joanne Adler in Pt. Pleasant, PA -- Saturday, 29 March 2008, at 8:41 p.m.
27 messages -- Newest posted Saturday, 24 May 2008, at 7:47 a.m.
Eating out, bad experience -- Dale Lenz -- Saturday, 29 March 2008, at 9:35 p.m.
65 messages -- Newest posted Tuesday, 1 April 2008, at 7:35 a.m.
CarveWright Machine(Good or No Good) -- Scott S. -- Saturday, 29 March 2008, at 9:42 p.m.
5 messages -- Newest posted Sunday, 30 March 2008, at 7:07 p.m.
cookie *NM* -- Scott Banbury -- Saturday, 29 March 2008, at 10:56 p.m.
3 messages -- Newest posted Sunday, 30 March 2008, at 12:07 p.m.
Mostly OT, photo editing *LINK* -- Dan Donaldson -- Sunday, 30 March 2008, at 3:16 a.m.
5 messages -- Newest posted Sunday, 30 March 2008, at 9:31 p.m.
HVLP Spray Gun... -- Rob Hix - King George, VA -- Sunday, 30 March 2008, at 6:50 a.m.
5 messages -- Newest posted Monday, 31 March 2008, at 10:38 a.m.
OT Computer Monitor -- tom norton -- Sunday, 30 March 2008, at 7:11 a.m.
9 messages -- Newest posted Monday, 31 March 2008, at 9:28 a.m.
For Joann Adler-Fresh Cut Chinese Elm *PIC* -- Ken Oakley-Sunny St. Cloud, Fla -- Sunday, 30 March 2008, at 11:14 a.m.
10 messages -- Newest posted Monday, 31 March 2008, at 10:50 p.m.
Need Lathe Suggestions -- Jerry -- Sunday, 30 March 2008, at 6:34 p.m.
5 messages -- Newest posted Monday, 31 March 2008, at 1:23 p.m.
Drill Press Safety Planer -- Justin Fields -- Sunday, 30 March 2008, at 9:23 p.m.
24 messages -- Newest posted Tuesday, 1 April 2008, at 4:24 p.m.
Wood ID by USDA Forest Service *LINK* -- John K Jordan -- Sunday, 30 March 2008, at 10:26 p.m.
3 messages -- Newest posted Tuesday, 1 April 2008, at 9:33 a.m.
OT for guitar geeks ;-) *LINK* -- Dan Donaldson -- Monday, 31 March 2008, at 12:20 a.m.
2 messages -- Newest posted Monday, 31 March 2008, at 9:50 a.m.
OT - Getting blood out of "micro-fiber" -- Terry Alexander -- Monday, 31 March 2008, at 10:23 a.m.
7 messages -- Newest posted Monday, 31 March 2008, at 10:00 p.m.
I assume this is a spam-scam? NOT OT -- Alan Young -- Monday, 31 March 2008, at 12:06 p.m.
11 messages -- Newest posted Monday, 31 March 2008, at 10:44 p.m.
Happy Birthday, Jim Shaver! -- Denis Chénard, Orléans, Ont. -- Monday, 31 March 2008, at 12:11 p.m.
24 messages -- Newest posted Wednesday, 2 April 2008, at 4:18 p.m.
Ridiculously OT: Clips vs Magazines __*LINK* -- Rod Peterson -- Ormond Beach -- Monday, 31 March 2008, at 12:59 p.m.
6 messages -- Newest posted Monday, 31 March 2008, at 9:34 p.m.
Bent Lamination Questions -- Bill Tindall, E.TN -- Monday, 31 March 2008, at 2:22 p.m.
12 messages -- Newest posted Tuesday, 1 April 2008, at 3:49 p.m.
Any Problem Using Dado Blade .... -- Joe in Tallahassee FLA -- Monday, 31 March 2008, at 3:40 p.m.
8 messages -- Newest posted Tuesday, 1 April 2008, at 11:56 a.m.
Call Mark Goodall - Geek Question -- Mark Kauder, Phenix City, AL -- Monday, 31 March 2008, at 4:07 p.m.
10 messages -- Newest posted Thursday, 3 April 2008, at 12:06 a.m.
wood handles -- Mary Plott -- Monday, 31 March 2008, at 4:45 p.m.
2 messages -- Newest posted Monday, 31 March 2008, at 5:50 p.m.
need every1 opinion -- edward mccormack -- Monday, 31 March 2008, at 5:56 p.m.
3 messages -- Newest posted Tuesday, 1 April 2008, at 8:46 a.m.
Nail gun . . . air ? -- steve mackay -- Monday, 31 March 2008, at 6:55 p.m.
7 messages -- Newest posted Wednesday, 2 April 2008, at 11:58 a.m.
drying hickory *PIC* -- Chuck -- Monday, 31 March 2008, at 7:59 p.m.
4 messages -- Newest posted Tuesday, 1 April 2008, at 10:20 a.m.
Fat Edges ?? -- Joe Burke -- Tuesday, 1 April 2008, at 12:29 a.m.
5 messages -- Newest posted Tuesday, 1 April 2008, at 10:47 a.m.
Any ever buy from Toolbarn.com? *LINK* -- Dan Mitchell -- Tuesday, 1 April 2008, at 4:33 a.m.
3 messages -- Newest posted Tuesday, 1 April 2008, at 2:24 p.m.
Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 1 April 2008, at 7:09 a.m.
1 message
WC Weekend Accomplishments..... -- Dennis E. Peacock -- Tuesday, 1 April 2008, at 9:58 a.m.
8 messages -- Newest posted Wednesday, 2 April 2008, at 8:43 a.m.
New Joinery System to be released -- Hitachi Tools -- Tuesday, 1 April 2008, at 10:02 a.m.
4 messages -- Newest posted Tuesday, 1 April 2008, at 11:20 a.m.
somewhat OT remote window operators -- jared -- Tuesday, 1 April 2008, at 10:54 a.m.
3 messages -- Newest posted Tuesday, 1 April 2008, at 3:47 p.m.
Constructing a Butcher Block top -- Alan Young -- Tuesday, 1 April 2008, at 11:38 a.m.
10 messages -- Newest posted Wednesday, 2 April 2008, at 4:34 p.m.
O.T. Spicing 18g wire together -- Alan Tolchinsky -- Tuesday, 1 April 2008, at 1:24 p.m.
8 messages -- Newest posted Thursday, 3 April 2008, at 4:41 p.m.
Woodcraft called.... -- Patrick Schupbach -- Tuesday, 1 April 2008, at 1:53 p.m.
5 messages -- Newest posted Thursday, 3 April 2008, at 1:34 p.m.
Plane holsters ? -- Barry Rubenstein -- Tuesday, 1 April 2008, at 2:22 p.m.
3 messages -- Newest posted Tuesday, 1 April 2008, at 5:07 p.m.
Shop wiring...metallic cable -- Joe Pack -- Tuesday, 1 April 2008, at 2:23 p.m.
3 messages -- Newest posted Tuesday, 1 April 2008, at 9:17 p.m.
Safety Issue w/Warning *LINK* -- Tom Pilsbury (Chicago) -- Tuesday, 1 April 2008, at 3:12 p.m.
6 messages -- Newest posted Tuesday, 1 April 2008, at 8:04 p.m.
OT: Heat pump question -- Dan Mitchell -- Tuesday, 1 April 2008, at 4:00 p.m.
16 messages -- Newest posted Friday, 4 April 2008, at 6:00 p.m.
Fence handle snapped off -- #&^@$!!! -- A.J. Hamler -- Tuesday, 1 April 2008, at 4:33 p.m.
9 messages -- Newest posted Wednesday, 2 April 2008, at 10:43 a.m.
Sharpening stakes questions? -- Barry Irby -- Tuesday, 1 April 2008, at 4:56 p.m.
7 messages -- Newest posted Tuesday, 1 April 2008, at 10:29 p.m.
cabinet making -- matt -- Tuesday, 1 April 2008, at 4:59 p.m.
4 messages -- Newest posted Wednesday, 2 April 2008, at 7:32 a.m.
No need to Vote (OT) *LINK* -- Dustmaker Mike -- Tuesday, 1 April 2008, at 5:11 p.m.
8 messages -- Newest posted Wednesday, 2 April 2008, at 11:56 a.m.
planer blades -- jared -- Tuesday, 1 April 2008, at 7:23 p.m.
4 messages -- Newest posted Wednesday, 2 April 2008, at 3:45 p.m.
bandsaw tension gauge -- Eric Anderson -- Tuesday, 1 April 2008, at 10:00 p.m.
2 messages -- Newest posted Wednesday, 2 April 2008, at 6:51 p.m.
QSWO design question -- wilbur -- Tuesday, 1 April 2008, at 11:14 p.m.
4 messages -- Newest posted Wednesday, 2 April 2008, at 3:42 p.m.
New Work, Collaborations -- Thomas Skaggs, Foothills of Mount Level -- Wednesday, 2 April 2008, at 10:31 a.m.
28 messages -- Newest posted Thursday, 3 April 2008, at 6:23 a.m.
cocobolo table - success story! -- Steve Silca -- Wednesday, 2 April 2008, at 11:13 a.m.
10 messages -- Newest posted Wednesday, 2 April 2008, at 9:52 p.m.
New Garage Shop -- Howard -- Wednesday, 2 April 2008, at 11:39 a.m.
9 messages -- Newest posted Thursday, 3 April 2008, at 9:24 a.m.
Sorta OT: cutting palms -- John_in_Az -- Wednesday, 2 April 2008, at 4:03 p.m.
4 messages -- Newest posted Thursday, 3 April 2008, at 12:50 p.m.
Speaking of cocobolo *PIC* -- Clint Searl, at the base of Haycock Mtn -- Wednesday, 2 April 2008, at 6:02 p.m.
6 messages -- Newest posted Wednesday, 2 April 2008, at 11:54 p.m.
Garage door threshold....glue type? -- Virgil Johnson, Versailles KY -- Wednesday, 2 April 2008, at 6:21 p.m.
6 messages -- Newest posted Saturday, 5 April 2008, at 9:23 a.m.
OT: HVAC: Which make/model? -- Dan Mitchell -- Wednesday, 2 April 2008, at 8:03 p.m.
13 messages -- Newest posted Saturday, 5 April 2008, at 3:32 a.m.
Donate WC . . . -- steve mackay -- Wednesday, 2 April 2008, at 8:28 p.m.
3 messages -- Newest posted Wednesday, 2 April 2008, at 10:41 p.m.
Router table wiring question *PIC* -- Tom Pilsbury (Chicago) -- Wednesday, 2 April 2008, at 9:28 p.m.
14 messages -- Newest posted Thursday, 3 April 2008, at 5:48 p.m.
OT - looking for Tennessee folks *PIC* -- Carol - now in NC Nebraska -- Wednesday, 2 April 2008, at 11:16 p.m.
8 messages -- Newest posted Thursday, 3 April 2008, at 5:09 p.m.
Zen and the Art of A Clean Shop -- Clay Foster -- Thursday, 3 April 2008, at 12:33 a.m.
16 messages -- Newest posted Friday, 4 April 2008, at 4:40 p.m.
You used the what? OT long -- Dustmaker Mike -- Thursday, 3 April 2008, at 6:35 a.m.
6 messages -- Newest posted Friday, 4 April 2008, at 9:49 a.m.
OT: XP & Vista Network Problem -- Ken Krawford -- Thursday, 3 April 2008, at 7:16 a.m.
21 messages -- Newest posted Monday, 7 April 2008, at 8:18 a.m.
Free Wood Revisited -- Allen Bryant - Bumpass, VA -- Thursday, 3 April 2008, at 11:19 a.m.
2 messages -- Newest posted Thursday, 3 April 2008, at 11:37 a.m.
Question: edgebanding MDF -- Pat Evans -- Thursday, 3 April 2008, at 11:27 a.m.
2 messages -- Newest posted Thursday, 3 April 2008, at 1:22 p.m.
Band saw movement -- JimG -- Thursday, 3 April 2008, at 12:27 p.m.
4 messages -- Newest posted Sunday, 6 April 2008, at 10:09 a.m.
User / Instruction Manuals -- North of the Border -- Thursday, 3 April 2008, at 12:30 p.m.
10 messages -- Newest posted Saturday, 5 April 2008, at 6:55 p.m.
Self Employed Woodworker - OT -- Mike Stafford -- Thursday, 3 April 2008, at 12:59 p.m.
5 messages -- Newest posted Friday, 4 April 2008, at 1:15 p.m.
Way OT -- Doug Ridley -- Thursday, 3 April 2008, at 1:39 p.m.
3 messages -- Newest posted Thursday, 3 April 2008, at 6:11 p.m.
OT - Question for programmers -- Denis Chénard, Orléans, Ont. -- Thursday, 3 April 2008, at 5:09 p.m.
13 messages -- Newest posted Monday, 7 April 2008, at 9:17 a.m.
Graphite lubricant -- Wayne Carson -- Thursday, 3 April 2008, at 10:41 p.m.
3 messages -- Newest posted Friday, 4 April 2008, at 7:36 a.m.
Shopsmith sander attachment -- Parisian, VL -- Thursday, 3 April 2008, at 10:42 p.m.
3 messages -- Newest posted Friday, 4 April 2008, at 11:27 a.m.
Ellis - screenshot *PIC* -- Al Stokka - Cambridge, Iowa -- Friday, 4 April 2008, at 11:27 a.m.
2 messages -- Newest posted Saturday, 5 April 2008, at 6:43 a.m.
Adaware spy removal software problem -- Alan Tolchinsky -- Friday, 4 April 2008, at 3:49 p.m.
8 messages -- Newest posted Sunday, 6 April 2008, at 8:57 p.m.
wooden signs -- John K Jordan -- Friday, 4 April 2008, at 6:54 p.m.
9 messages -- Newest posted Sunday, 6 April 2008, at 1:48 a.m.
project damaged in shipment *PIC* -- Louie Lovas -- Friday, 4 April 2008, at 8:35 p.m.
10 messages -- Newest posted Sunday, 6 April 2008, at 11:16 p.m.
test -- John Weber -- Friday, 4 April 2008, at 8:51 p.m.
5 messages -- Newest posted Saturday, 5 April 2008, at 9:52 a.m.
Sheds: Build, Buy, Plastic, etc... -- John Weber -- Friday, 4 April 2008, at 8:52 p.m.
32 messages -- Newest posted Wednesday, 9 April 2008, at 11:42 a.m.
OT: Floor levelling compound -- Bill Howatt -- Friday, 4 April 2008, at 9:14 p.m.
2 messages -- Newest posted Saturday, 5 April 2008, at 10:21 a.m.
jooltool accessories -- rick g. -- Saturday, 5 April 2008, at 11:31 a.m.
1 message
OT: EBay Ratings -- Hal Langerud -- Saturday, 5 April 2008, at 11:43 a.m.
5 messages -- Newest posted Sunday, 6 April 2008, at 7:59 a.m.
AVG Antivirus Question-OT -- DP -- Saturday, 5 April 2008, at 12:20 p.m.
7 messages -- Newest posted Sunday, 6 April 2008, at 12:39 p.m.
OT Help with car buying???? -- Barry Irby -- Saturday, 5 April 2008, at 4:30 p.m.
20 messages -- Newest posted Monday, 7 April 2008, at 11:33 a.m.
OT - Firefox Opening Ads? -- Garrett in Victoria -- Saturday, 5 April 2008, at 7:16 p.m.
7 messages -- Newest posted Sunday, 6 April 2008, at 8:49 p.m.
Re: Invitation to an Open Shop -- Darrell Peart -- Sunday, 6 April 2008, at 5:25 p.m.
2 messages -- Newest posted Monday, 7 April 2008, at 12:25 a.m.
What to See in TN & VA? -- Ron In Sterling CT -- Sunday, 6 April 2008, at 7:10 p.m.
12 messages -- Newest posted Tuesday, 8 April 2008, at 7:26 p.m.
Sawstop Assembly -- Patrick Schupbach -- Sunday, 6 April 2008, at 7:26 p.m.
2 messages -- Newest posted Sunday, 6 April 2008, at 8:48 p.m.
dry wall screw setter -- Ron Gricher -- Sunday, 6 April 2008, at 7:53 p.m.
6 messages -- Newest posted Tuesday, 8 April 2008, at 9:39 p.m.
New planer is sniping at me! *PIC* -- Dan Mitchell -- Sunday, 6 April 2008, at 8:17 p.m.
16 messages -- Newest posted Monday, 7 April 2008, at 4:37 p.m.
Hourly Rate -- GarryF -- Sunday, 6 April 2008, at 8:45 p.m.
14 messages -- Newest posted Thursday, 10 April 2008, at 12:56 p.m.
Rail and Stile Question -- Bill H -- Monday, 7 April 2008, at 12:50 a.m.
4 messages -- Newest posted Monday, 7 April 2008, at 9:39 p.m.
***TOOLMAKING CONTEST RESULTS*** *LINK* -- Ellis Walentine -- Monday, 7 April 2008, at 4:40 a.m.
3 messages -- Newest posted Monday, 7 April 2008, at 9:02 p.m.
Gota Love Technology OT -- Dustmaker Mike -- Monday, 7 April 2008, at 5:00 a.m.
2 messages -- Newest posted Monday, 7 April 2008, at 10:56 a.m.
MPG OT -- Dustmaker Mike -- Monday, 7 April 2008, at 6:21 a.m.
6 messages -- Newest posted Tuesday, 8 April 2008, at 4:20 p.m.
Tool Contest comment -- Bill Tindall, E.TN -- Monday, 7 April 2008, at 8:51 a.m.
11 messages -- Newest posted Friday, 11 April 2008, at 6:37 p.m.
Visit to Highland Woodworking -- David -- Monday, 7 April 2008, at 9:16 a.m.
10 messages -- Newest posted Tuesday, 8 April 2008, at 8:28 p.m.
WC Weekend Accomplishments..... -- Dennis E. Peacock -- Monday, 7 April 2008, at 9:23 a.m.
10 messages -- Newest posted Tuesday, 8 April 2008, at 12:00 p.m.
Hiring a contractor - ADVICE -- Rick Snyder -- Monday, 7 April 2008, at 9:54 a.m.
23 messages -- Newest posted Wednesday, 9 April 2008, at 7:14 p.m.
Wiping varnish -- Joe -- Monday, 7 April 2008, at 1:08 p.m.
9 messages -- Newest posted Tuesday, 8 April 2008, at 8:13 a.m.
How do you fold a pad of steel wool? -- Brian Hahn in SW Wisconsin -- Monday, 7 April 2008, at 2:54 p.m.
5 messages -- Newest posted Tuesday, 8 April 2008, at 1:47 p.m.
Dead compressor--fix/replace? -- Tony Sade (Charleston, WV) -- Monday, 7 April 2008, at 3:00 p.m.
11 messages -- Newest posted Wednesday, 9 April 2008, at 11:20 a.m.
OT: Domain name renewal and fee -- Stuart Johnson -- Monday, 7 April 2008, at 3:19 p.m.
8 messages -- Newest posted Wednesday, 9 April 2008, at 4:19 p.m.
Pneumatic Wood Chisel? -- David Miller from Iowa -- Monday, 7 April 2008, at 5:54 p.m.
4 messages -- Newest posted Tuesday, 8 April 2008, at 12:47 p.m.
Give Them a Medal OT Graphic *LINK* -- Dustmaker Mike -- Monday, 7 April 2008, at 8:03 p.m.
4 messages -- Newest posted Monday, 7 April 2008, at 10:41 p.m.
Numbr3rs -- Bri in Mtl -- Tuesday, 8 April 2008, at 5:18 a.m.
11 messages -- Newest posted Wednesday, 9 April 2008, at 2:32 p.m.
Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 8 April 2008, at 7:17 a.m.
1 message
Is this a good Idea? -- Larry in NW Ohio -- Tuesday, 8 April 2008, at 8:54 a.m.
5 messages -- Newest posted Tuesday, 8 April 2008, at 12:02 p.m.
Pocket Screw Question -- Nat Robison -- Tuesday, 8 April 2008, at 11:19 a.m.
4 messages -- Newest posted Tuesday, 8 April 2008, at 4:56 p.m.
Joel's article on grinding -- John Pappas -- Tuesday, 8 April 2008, at 6:33 p.m.
5 messages -- Newest posted Tuesday, 8 April 2008, at 10:34 p.m.
OT - XP Service Pack 3 -- Chuck W -- Tuesday, 8 April 2008, at 7:45 p.m.
4 messages -- Newest posted Wednesday, 9 April 2008, at 10:11 p.m.
Missing post -- Dan Mitchell -- Tuesday, 8 April 2008, at 8:19 p.m.
8 messages -- Newest posted Wednesday, 9 April 2008, at 8:20 p.m.
table saw adjustment -- Raymond Bissonette -- Tuesday, 8 April 2008, at 9:31 p.m.
3 messages -- Newest posted Thursday, 10 April 2008, at 6:19 p.m.
Best wood for feather board -- Wayne Carson -- Tuesday, 8 April 2008, at 10:52 p.m.
8 messages -- Newest posted Wednesday, 9 April 2008, at 2:51 p.m.
Log Tenon Cutters -- slalonde -- Wednesday, 9 April 2008, at 9:46 a.m.
4 messages -- Newest posted Wednesday, 9 April 2008, at 11:20 a.m.
Way OT -- Inoperable car door -- A.J. Hamler -- Wednesday, 9 April 2008, at 10:07 a.m.
11 messages -- Newest posted Thursday, 10 April 2008, at 6:11 p.m.
Extra thin mdf? -- pecker -- Wednesday, 9 April 2008, at 11:34 a.m.
6 messages -- Newest posted Wednesday, 9 April 2008, at 5:46 p.m.
finishers in So Cal -- Thomas S Stockton -- Wednesday, 9 April 2008, at 12:33 p.m.
1 message
cookies *NM* -- Robert R Clough - Thorncraft -- Wednesday, 9 April 2008, at 8:55 p.m.
3 messages -- Newest posted Thursday, 10 April 2008, at 10:25 a.m.
Saw filing vice -- John -- Wednesday, 9 April 2008, at 9:07 p.m.
6 messages -- Newest posted Thursday, 10 April 2008, at 7:51 p.m.
Question about a rush seat pattern... -- Rob Hix - King George, VA -- Wednesday, 9 April 2008, at 9:24 p.m.
6 messages -- Newest posted Friday, 11 April 2008, at 12:26 a.m.
Wisdom OT -- Dustmaker Mike -- Thursday, 10 April 2008, at 6:46 a.m.
5 messages -- Newest posted Thursday, 10 April 2008, at 10:20 a.m.
Admin: Amazon cut? *PIC* -- John K Jordan -- Thursday, 10 April 2008, at 9:49 a.m.
2 messages -- Newest posted Thursday, 10 April 2008, at 11:50 a.m.
Rob Cosman Videos -- Wayne Carson "TX" -- Thursday, 10 April 2008, at 10:10 a.m.
9 messages -- Newest posted Friday, 11 April 2008, at 7:55 p.m.
Push button off, on switch -- ben d. -- Thursday, 10 April 2008, at 10:10 a.m.
4 messages -- Newest posted Thursday, 10 April 2008, at 3:32 p.m.
OT - Cake question (preferences) ... -- JL -- Thursday, 10 April 2008, at 12:38 p.m.
24 messages -- Newest posted Friday, 11 April 2008, at 5:38 a.m.
"Painting" an ugly garage/shop floor... -- Ralph Turney -- Thursday, 10 April 2008, at 4:05 p.m.
13 messages -- Newest posted Tuesday, 15 April 2008, at 5:06 p.m.
ot slightly -- Dan arrowsmith -- Thursday, 10 April 2008, at 4:42 p.m.
8 messages -- Newest posted Friday, 11 April 2008, at 7:51 a.m.
Coffee Table plan? -- Warren E. White -- Thursday, 10 April 2008, at 6:23 p.m.
3 messages -- Newest posted Friday, 11 April 2008, at 8:55 a.m.
Somewhat OT. Backyard fences -- Stuart Hough -- Thursday, 10 April 2008, at 8:55 p.m.
10 messages -- Newest posted Friday, 11 April 2008, at 6:38 p.m.
They Came and Took It Away -- George@Colonel's Workshop-Havertown PA -- Thursday, 10 April 2008, at 9:42 p.m.
10 messages -- Newest posted Friday, 11 April 2008, at 11:39 p.m.
OT Computer help/Norton help needed -- Barry Irby -- Thursday, 10 April 2008, at 10:58 p.m.
16 messages -- Newest posted Friday, 11 April 2008, at 7:42 p.m.
Hybrid table saws -- Chuck in ND -- Friday, 11 April 2008, at 1:38 p.m.
4 messages -- Newest posted Saturday, 12 April 2008, at 11:28 a.m.
OT: PC humor -- Dan Mitchell -- Friday, 11 April 2008, at 2:32 p.m.
3 messages -- Newest posted Friday, 11 April 2008, at 4:48 p.m.
Stickers? -- Mark Mandell - Gone Round In Jersey -- Friday, 11 April 2008, at 3:20 p.m.
8 messages -- Newest posted Sunday, 13 April 2008, at 10:50 a.m.
Dust collection floor sweeps? -- Scott in Montana -- Friday, 11 April 2008, at 3:27 p.m.
13 messages -- Newest posted Tuesday, 15 April 2008, at 1:01 a.m.
Set up new Jet Hybrid Saw Today -- George@Colonel's Workshop-Havertown PA -- Friday, 11 April 2008, at 4:06 p.m.
8 messages -- Newest posted Monday, 14 April 2008, at 10:15 p.m.
OT/ Excel questions... *PIC* -- Ralph Turney -- Friday, 11 April 2008, at 5:11 p.m.
4 messages -- Newest posted Saturday, 12 April 2008, at 8:43 a.m.
OT - new laptop - Linux?? Dan? -- Carol - now in NC Nebraska -- Friday, 11 April 2008, at 5:27 p.m.
34 messages -- Newest posted Tuesday, 15 April 2008, at 9:34 p.m.
Charles Neil on his SawStop *LINK* -- Bri in Mtl -- Friday, 11 April 2008, at 8:05 p.m.
5 messages -- Newest posted Saturday, 12 April 2008, at 1:45 p.m.
OT: Yard roots -- John Weber -- Friday, 11 April 2008, at 9:16 p.m.
6 messages -- Newest posted Saturday, 12 April 2008, at 9:29 a.m.
Wow it is getting Windy OT -- Dustmaker Mike -- Friday, 11 April 2008, at 9:33 p.m.
6 messages -- Newest posted Saturday, 12 April 2008, at 2:39 p.m.
Yellow Poplar... -- john l. blue -- Friday, 11 April 2008, at 11:32 p.m.
12 messages -- Newest posted Sunday, 13 April 2008, at 6:22 p.m.
A cost comparison. -- ken raddon -- Friday, 11 April 2008, at 11:32 p.m.
23 messages -- Newest posted Saturday, 24 May 2008, at 10:56 p.m.
Mostly OT *LINK* -- Dan Donaldson -- Saturday, 12 April 2008, at 1:15 a.m.
7 messages -- Newest posted Saturday, 12 April 2008, at 4:52 p.m.
Help from electrically connected -- Howie in Prescott -- Saturday, 12 April 2008, at 1:58 a.m.
2 messages -- Newest posted Saturday, 12 April 2008, at 2:36 a.m.
lighting a new shop -- Paul -- Saturday, 12 April 2008, at 7:14 a.m.
14 messages -- Newest posted Monday, 14 April 2008, at 9:53 p.m.
Sawstop Setup -- Patrick Schupbach -- Saturday, 12 April 2008, at 7:14 a.m.
6 messages -- Newest posted Wednesday, 16 April 2008, at 9:57 p.m.
OT Ceramic Tile Question -- Ken Krawford -- Saturday, 12 April 2008, at 9:27 a.m.
9 messages -- Newest posted Monday, 14 April 2008, at 12:23 p.m.
OT -- Dan D. or Rod P.? Mailbox.pab -- Terry Alexander -- Saturday, 12 April 2008, at 11:44 a.m.
3 messages -- Newest posted Sunday, 13 April 2008, at 11:58 a.m.
question for WW club members -- Bill Tindall, E.TN -- Saturday, 12 April 2008, at 12:34 p.m.
3 messages -- Newest posted Monday, 14 April 2008, at 7:47 p.m.
Leigh Super jig 12" vs 18"? -- North of the Border -- Saturday, 12 April 2008, at 12:35 p.m.
8 messages -- Newest posted Saturday, 12 April 2008, at 9:49 p.m.
Delta band saw -- Jim Hoeller -- Saturday, 12 April 2008, at 2:18 p.m.
4 messages -- Newest posted Saturday, 12 April 2008, at 5:59 p.m.
OT Computer "User account" Questions. -- Barry Irby -- Saturday, 12 April 2008, at 3:54 p.m.
4 messages -- Newest posted Sunday, 13 April 2008, at 6:41 p.m.
OT Lawn mowers *LINK* -- Virgil Johnson, Versailles KY -- Saturday, 12 April 2008, at 7:08 p.m.
15 messages -- Newest posted Monday, 14 April 2008, at 9:59 p.m.
metal detectors -- Mike Heili -- Sunday, 13 April 2008, at 12:15 a.m.
6 messages -- Newest posted Sunday, 13 April 2008, at 7:47 p.m.
Invisible sound *LINK* -- Moses Yoder -- Sunday, 13 April 2008, at 6:35 a.m.
6 messages -- Newest posted Monday, 14 April 2008, at 7:39 p.m.
