1 2 3 4 5 6 7

Messages

Message Index

Published again- smaller scale this time
Bar hopping.
Re: Bar hopping.
Re: Bar hopping.
Re: Bar hopping.
Good thoughts all. Thanks. *NM*
Keep the runner's/slots waxed good *NM*
Reconsider the Incra's
Two things,
Re: Bar hopping.
McMaster Carr...
Re: Bar hopping. *LINK*
Re: Bar hopping.
IWF report- glue-Working Time
Re: IWF report- glue-Working Time
Bring it on! additional info to answer your questi
Thanks, Bill
White vs Yellow glue
Re: Thanks, Bill
I'll be interested to hear the last word
My thoughts
One more thing.
Re: IWF report- glue-Working Time
Titebond liquid hide glue
Laser marquetry *LINK*
Jointer base free to a good home
IWF report- Colt drills, awesome!
Re: IWF report- Colt drills, awesome!
Re: IWF report- Colt drills, awesome!
Re: IWF report- Colt drills, awesome!
Questions
Not sure
Re: Questions
Re: Questions
Good to know. Thanks *NM*
Re: IWF report- Colt drills, awesome!
Spray gun
Re: Spray gun *LINK*
that one is EASY
Re: Spray gun
Re: Spray gun
Re: Another Spray Gun Option *LINK*
I think the scraps are multiplying.....
Re: I think the scraps are multiplying.....
cedar chest
Re: cedar chest
Re: cedar chest *LINK*
Agree, BUT:
Re: Agree, BUT:
What I Did *PIC*
Re: What I Did
Performax switch went bad again....
Re: Performax switch went bad again....
Not sure if that makes me feel better.....
Re: Not sure if that makes me feel better.....
Re: Not sure if that makes me feel better.....
Question on Screws
Re: Question on Screws
I don't know either...
The worst
Re: For what it's worth......
Could it be a patent thing?
Re: Could it be a patent thing? *LINK*
Re: Question on Screws
Me too.
Re: Question on Screws
Re: Question on Screws
Re: Question on Screws
Never again,
Re: Never again,
Keeping steel pipe clamps from staining work?
Re: Keeping steel pipe clamps from staining work?
That's A Good Idea.......... *NM*
Re: Keeping steel pipe clamps from staining work?
Re: Keeping steel pipe clamps from staining work?
Re: galvanized
Re: galvanized
Re: Keeping steel pipe clamps from staining work?
Hand Planes......
Re: Keeping steel pipe clamps from staining work?
Re: Keeping steel pipe clamps from staining work?
Re: Keeping steel pipe clamps from staining work?
Re: Keeping steel pipe clamps from staining work?
In general....
Re: In general.... *LINK* *PIC*
Re: In general....
I use spacers...
Explanation of what is going on....
Re: Explanation of what is going on....
Re: Explanation of what is going on....
pipe clamps
Oh Yes! these are the clamps
I don't know Bill...
Spraying Varathane
Re: Spraying Varathane
Re: Spraying Varathane
Re: Spraying Varathane
of course
I actually called Varathane . . .
(Message Deleted by Poster)
Re: cedar chest
Re: cedar chest
OT - Any horse groomer/owners here?
Hair Trim Gadget
Re: OT - Any horse groomer/owners here?
Re: OT - Any horse groomer/owners here?
fastening mdf
Re: fastening mdf *LINK*
BTW
Confirmat Screws
I am sure those screws are good, BUT
Re: I am sure those screws are good, BUT
Re: fastening mdf
Re: fastening mdf
Just got back
Re: Dryer Clothes
Re: Dryer Clothes
Craftsman router
Re: Craftsman router
Re: Craftsman router
Re: Craftsman router
Re: Craftsman router
Well Darn!
been there, done that, and probably will again *NM*
Re: Well Darn!
As the old saying goes...
Odate's "Geta" in Oct. Popular Woodworking
Re: Odate's "Geta" in Oct. Popular Woodworking
Re: Odate's "Geta" in Oct. Popular Woodworking
I don't know *NM*
I use the HDPE tape from M-C. *NM*
I did something like that
I just went the other way *PIC*
buy gun, learn to spray
Re: Odate's "Geta" in Oct. Popular Woodworking
Re: Odate's "Geta" in Oct. Popular Woodworking
raise the runners above the divider
Geta *LINK*
Re: Geta
Tuesday Night Hand Tool Chat
Latest thing for bathroom remodellers.....
What I want to say won't make it past the censors *NM*
Re: What I want to say won't make it past the cens
Re: Latest thing for bathroom remodellers.....
Re: Latest thing for bathroom remodellers.....
What We Need Here IS
Re: Yes!.....as long as his aim is right.... *NM*
Very nice Patrick
Porter Cable Stair Template manual?
Re: Porter Cable Stair Template manual?
Router bit slipping
Re: Router bit slipping
Re: Router bit slipping
Re: Router bit slipping
Re: Router bit slipping
Re: Router bit slipping
Re: Router bit slipping
Worn out collet?
Re: Worn out collet?
Re: Worn out collet?
Bit Jack Hammering Effect
Re: OT Alaskan cruises
Re: OT Alaskan cruises
Re: OT Alaskan cruises
Questions on inlaying into walnut panels
Re: Questions on inlaying into walnut panels *LINK*
Re: Questions on inlaying into walnut panels *LINK*
Soy glue for plywood *LINK*
I'm sorry ? . . .
Can't think of a better use for tofu! *NM*
Re: Soy glue for plywood
Drying Big Leaf Maple
Re: Drying Big Leaf Maple
Re: Drying Big Leaf Maple *LINK*
Re: Drying Big Leaf Maple
Re: Drying Big Leaf Maple
Don't forget the bears!
Another vote for Holland America
Re: Email provider???
Unusual to say the least...
Re: OT Alaskan cruises
Re: Dryer Clothes chart
Ask over at OWWM.COM *NM*
Easier than it sounds
Yet another report...
OT Mini weather grumble...
A strange year
Re: A strange year
Re: A strange year
Re: Planer positioning
Re: Planer positioning
Re: Planer positioning
Thanks Lynn I'll look it up tonight. *NM*
Mine Work Well
Got a leaf blower? *LINK*
Re: Got a leaf blower?
Re: Got a leaf blower?
Re: Got a leaf blower?
Re: Question to all
Re: Question to all
IWF report- diamond sharpening
Re: IWF report- diamond sharpening
Re: IWF report- diamond sharpening
Re: IWF report- diamond sharpening
Re: IWF report- diamond sharpening
what was said.....
Bill, What Are Your Sources for Diamond Grit
Re: Bill, What Are Your Sources for Diamond Grit
source
Bill's usually right... *LINK*
Re: Email provider???
Re: Checking The Cutter Head Lock...
Re: Planer positioning
Re: Padding Bar Clamps Question?
Re: Padding Bar Clamps Question?
Depth Stop?
Re: Planer positioning
Fuming the Bank
Re: Fuming the Bank
Re: Fuming the Bank
Re: Planer positioning
Re: Planer positioning
Re: help needed, finishing Morris Chair *LINK*
Re: Padding Bar Clamps Question?
Thanks, Found it, .....
Re: Different Animal-Same Stable
WC Weekend Accomplishments...
Re: WC Weekend Accomplishments...
Completed Last Three Chess Boards
finished tractor shed *PIC*
Re: finished tractor shed
Re: finished tractor shed
Re: finished tractor shed
Re: finished tractor shed
Re: WC Weekend Accomplishments...
Failed to mention
Re: New floor in loft over shop..... *PIC*
Jesper, That Looks Great! *NM*
Great floor project. Beautiful Loft!! *NM*
Finished table, and found an alligator nest..
Ammonia and Meth
........or a chicken house or sheep pen
Re: OT Alaskan cruises
Re: Fuming and Stickley finishing
Re: Fuming and Stickley finishing
Your work deserves the best
Re: Planer positioning
Re: Planer positioning
Re: answered one question
size fixed *NM*
Easy
Re: Dryer Clothes
Re: Dryer Clothes
Re: Dryer Clothes
So far I'm leaning toward the scissor jack
Re: Planer positioning
Re: Planer positioning
ie is the standard…
Re: OT Alaskan cruises
visited site but what needs done to sign in. *NM*
I got in fine
Re: I got in fine
Re: I got in fine
Hmm, let's see... *LINK*
Scissors jack
1 2 3 4 5 6 7
© 1998 - 2010 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081